Commit bced8635 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging

* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  i2c-algo-bit: Add pre- and post-xfer hooks
  at24: Init dynamic bin_attribute structures
  i2c: Drop configure option I2C_DEBUG_CHIP
  tsl2550: Move from i2c/chips to misc
  i2c-i801: Don't use the block buffer for I2C block writes
  i2c-powermac: Be less verbose in the absence of real errors.
  i2c-smbus: Use device_lock/device_unlock
parents ceb804cd 0a9c1475
......@@ -73,7 +73,6 @@ config I2C_SMBUS
source drivers/i2c/algos/Kconfig
source drivers/i2c/busses/Kconfig
source drivers/i2c/chips/Kconfig
config I2C_DEBUG_CORE
bool "I2C Core debugging messages"
......@@ -98,12 +97,4 @@ config I2C_DEBUG_BUS
a problem with I2C support and want to see more of what is going
on.
config I2C_DEBUG_CHIP
bool "I2C Chip debugging messages"
help
Say Y here if you want the I2C chip drivers to produce a bunch of
debug messages to the system log. Select this if you are having
a problem with I2C support and want to see more of what is going
on.
endif # I2C
......@@ -6,7 +6,7 @@ obj-$(CONFIG_I2C_BOARDINFO) += i2c-boardinfo.o
obj-$(CONFIG_I2C) += i2c-core.o
obj-$(CONFIG_I2C_SMBUS) += i2c-smbus.o
obj-$(CONFIG_I2C_CHARDEV) += i2c-dev.o
obj-y += busses/ chips/ algos/
obj-y += algos/ busses/
ifeq ($(CONFIG_I2C_DEBUG_CORE),y)
EXTRA_CFLAGS += -DDEBUG
......
......@@ -522,6 +522,12 @@ static int bit_xfer(struct i2c_adapter *i2c_adap,
int i, ret;
unsigned short nak_ok;
if (adap->pre_xfer) {
ret = adap->pre_xfer(i2c_adap);
if (ret < 0)
return ret;
}
bit_dbg(3, &i2c_adap->dev, "emitting start condition\n");
i2c_start(adap);
for (i = 0; i < num; i++) {
......@@ -570,6 +576,9 @@ static int bit_xfer(struct i2c_adapter *i2c_adap,
bailout:
bit_dbg(3, &i2c_adap->dev, "emitting stop condition\n");
i2c_stop(adap);
if (adap->post_xfer)
adap->post_xfer(i2c_adap);
return ret;
}
......
......@@ -416,9 +416,11 @@ static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
data->block[0] = 32; /* max for SMBus block reads */
}
/* Experience has shown that the block buffer can only be used for
SMBus (not I2C) block transactions, even though the datasheet
doesn't mention this limitation. */
if ((i801_features & FEATURE_BLOCK_BUFFER)
&& !(command == I2C_SMBUS_I2C_BLOCK_DATA
&& read_write == I2C_SMBUS_READ)
&& command != I2C_SMBUS_I2C_BLOCK_DATA
&& i801_set_block_buffer_mode() == 0)
result = i801_block_transaction_by_block(data, read_write,
hwpec);
......
......@@ -122,9 +122,14 @@ static s32 i2c_powermac_smbus_xfer( struct i2c_adapter* adap,
rc = pmac_i2c_xfer(bus, addrdir, subsize, subaddr, buf, len);
if (rc) {
if (rc == -ENXIO)
dev_dbg(&adap->dev,
"I2C transfer at 0x%02x failed, size %d, "
"err %d\n", addrdir >> 1, size, rc);
else
dev_err(&adap->dev,
"I2C transfer at 0x%02x failed, size %d, err %d\n",
addrdir >> 1, size, rc);
"I2C transfer at 0x%02x failed, size %d, "
"err %d\n", addrdir >> 1, size, rc);
goto bail;
}
......@@ -175,10 +180,16 @@ static int i2c_powermac_master_xfer( struct i2c_adapter *adap,
goto bail;
}
rc = pmac_i2c_xfer(bus, addrdir, 0, 0, msgs->buf, msgs->len);
if (rc < 0)
if (rc < 0) {
if (rc == -ENXIO)
dev_dbg(&adap->dev, "I2C %s 0x%02x failed, err %d\n",
addrdir & 1 ? "read from" : "write to",
addrdir >> 1, rc);
else
dev_err(&adap->dev, "I2C %s 0x%02x failed, err %d\n",
addrdir & 1 ? "read from" : "write to", addrdir >> 1,
rc);
addrdir & 1 ? "read from" : "write to",
addrdir >> 1, rc);
}
bail:
pmac_i2c_close(bus);
return rc < 0 ? rc : 1;
......
#
# Miscellaneous I2C chip drivers configuration
#
# *** DEPRECATED! Do not add new entries! See Makefile ***
#
menu "Miscellaneous I2C Chip support"
config SENSORS_TSL2550
tristate "Taos TSL2550 ambient light sensor"
depends on EXPERIMENTAL
help
If you say yes here you get support for the Taos TSL2550
ambient light sensor.
This driver can also be built as a module. If so, the module
will be called tsl2550.
endmenu
#
# Makefile for miscellaneous I2C chip drivers.
#
# Do not add new drivers to this directory! It is DEPRECATED.
#
# Device drivers are better grouped according to the functionality they
# implement rather than to the bus they are connected to. In particular:
# * Hardware monitoring chip drivers go to drivers/hwmon
# * RTC chip drivers go to drivers/rtc
# * I/O expander drivers go to drivers/gpio
#
obj-$(CONFIG_SENSORS_TSL2550) += tsl2550.o
ifeq ($(CONFIG_I2C_DEBUG_CHIP),y)
EXTRA_CFLAGS += -DDEBUG
endif
......@@ -22,7 +22,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/device.h>
#include <linux/semaphore.h>
#include <linux/interrupt.h>
#include <linux/workqueue.h>
#include <linux/i2c.h>
......@@ -55,7 +54,7 @@ static int smbus_do_alert(struct device *dev, void *addrp)
* Drivers should either disable alerts, or provide at least
* a minimal handler. Lock so client->driver won't change.
*/
down(&dev->sem);
device_lock(dev);
if (client->driver) {
if (client->driver->alert)
client->driver->alert(client, data->flag);
......@@ -63,7 +62,7 @@ static int smbus_do_alert(struct device *dev, void *addrp)
dev_warn(&client->dev, "no driver alert()!\n");
} else
dev_dbg(&client->dev, "alert with no driver\n");
up(&dev->sem);
device_unlock(dev);
/* Stop iterating after we find the device */
return -EBUSY;
......
......@@ -268,6 +268,16 @@ config ISL29003
This driver can also be built as a module. If so, the module
will be called isl29003.
config SENSORS_TSL2550
tristate "Taos TSL2550 ambient light sensor"
depends on I2C && SYSFS
help
If you say yes here you get support for the Taos TSL2550
ambient light sensor.
This driver can also be built as a module. If so, the module
will be called tsl2550.
config EP93XX_PWM
tristate "EP93xx PWM support"
depends on ARCH_EP93XX
......
......@@ -21,6 +21,7 @@ obj-$(CONFIG_SGI_GRU) += sgi-gru/
obj-$(CONFIG_CS5535_MFGPT) += cs5535-mfgpt.o
obj-$(CONFIG_HP_ILO) += hpilo.o
obj-$(CONFIG_ISL29003) += isl29003.o
obj-$(CONFIG_SENSORS_TSL2550) += tsl2550.o
obj-$(CONFIG_EP93XX_PWM) += ep93xx_pwm.o
obj-$(CONFIG_DS1682) += ds1682.o
obj-$(CONFIG_TI_DAC7512) += ti_dac7512.o
......
......@@ -505,6 +505,7 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
* Export the EEPROM bytes through sysfs, since that's convenient.
* By default, only root should see the data (maybe passwords etc)
*/
sysfs_bin_attr_init(&at24->bin);
at24->bin.attr.name = "eeprom";
at24->bin.attr.mode = chip.flags & AT24_FLAG_IRUGO ? S_IRUGO : S_IRUSR;
at24->bin.read = at24_bin_read;
......
......@@ -47,8 +47,8 @@ struct tsl2550_data {
struct i2c_client *client;
struct mutex update_lock;
unsigned int power_state : 1;
unsigned int operating_mode : 1;
unsigned int power_state:1;
unsigned int operating_mode:1;
};
/*
......
......@@ -36,6 +36,8 @@ struct i2c_algo_bit_data {
void (*setscl) (void *data, int state);
int (*getsda) (void *data);
int (*getscl) (void *data);
int (*pre_xfer) (struct i2c_adapter *);
void (*post_xfer) (struct i2c_adapter *);
/* local settings */
int udelay; /* half clock cycle time in us,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment