Commit bcf5cef7 authored by Heiko Carstens's avatar Heiko Carstens Committed by Martin Schwidefsky

[S390] secure computing arch backend

Enable secure computing on s390 as well.
Signed-off-by: default avatarHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: default avatarMartin Schwidefsky <schwidefsky@de.ibm.com>
parent 7757591a
......@@ -567,6 +567,24 @@ bool "s390 guest support for KVM (EXPERIMENTAL)"
the KVM hypervisor. This will add detection for KVM as well as a
virtio transport. If KVM is detected, the virtio console will be
the default console.
config SECCOMP
bool "Enable seccomp to safely compute untrusted bytecode"
depends on PROC_FS
default y
help
This kernel feature is useful for number crunching applications
that may need to compute untrusted bytecode during their
execution. By using pipes or other transports made available to
the process as file descriptors supporting the read/write
syscalls, it's possible to isolate those applications in
their own address space using seccomp. Once seccomp is
enabled via /proc/<pid>/seccomp, it cannot be disabled
and the task is only allowed to execute a few safe syscalls
defined by each seccomp mode.
If unsure, say Y.
endmenu
source "net/Kconfig"
......
#ifndef _ASM_S390_SECCOMP_H
#define _ASM_S390_SECCOMP_H
#include <linux/unistd.h>
#define __NR_seccomp_read __NR_read
#define __NR_seccomp_write __NR_write
#define __NR_seccomp_exit __NR_exit
#define __NR_seccomp_sigreturn __NR_sigreturn
#define __NR_seccomp_read_32 __NR_read
#define __NR_seccomp_write_32 __NR_write
#define __NR_seccomp_exit_32 __NR_exit
#define __NR_seccomp_sigreturn_32 __NR_sigreturn
#endif /* _ASM_S390_SECCOMP_H */
......@@ -83,14 +83,15 @@ static inline struct thread_info *current_thread_info(void)
/*
* thread information flags bit numbers
*/
#define TIF_SYSCALL_TRACE 0 /* syscall trace active */
#define TIF_NOTIFY_RESUME 1 /* callback before returning to user */
#define TIF_SIGPENDING 2 /* signal pending */
#define TIF_NEED_RESCHED 3 /* rescheduling necessary */
#define TIF_RESTART_SVC 4 /* restart svc with new svc number */
#define TIF_SYSCALL_AUDIT 5 /* syscall auditing active */
#define TIF_SINGLE_STEP 6 /* deliver sigtrap on return to user */
#define TIF_MCCK_PENDING 7 /* machine check handling is pending */
#define TIF_SYSCALL_TRACE 8 /* syscall trace active */
#define TIF_SYSCALL_AUDIT 9 /* syscall auditing active */
#define TIF_SECCOMP 10 /* secure computing */
#define TIF_USEDFPU 16 /* FPU was used by this task this quantum (SMP) */
#define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling
TIF_NEED_RESCHED */
......@@ -99,15 +100,16 @@ static inline struct thread_info *current_thread_info(void)
#define TIF_RESTORE_SIGMASK 20 /* restore signal mask in do_signal() */
#define TIF_FREEZE 21 /* thread is freezing for suspend */
#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
#define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME)
#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK)
#define _TIF_SIGPENDING (1<<TIF_SIGPENDING)
#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
#define _TIF_RESTART_SVC (1<<TIF_RESTART_SVC)
#define _TIF_SYSCALL_AUDIT (1<<TIF_SYSCALL_AUDIT)
#define _TIF_SINGLE_STEP (1<<TIF_SINGLE_STEP)
#define _TIF_MCCK_PENDING (1<<TIF_MCCK_PENDING)
#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
#define _TIF_SYSCALL_AUDIT (1<<TIF_SYSCALL_AUDIT)
#define _TIF_SECCOMP (1<<TIF_SECCOMP)
#define _TIF_USEDFPU (1<<TIF_USEDFPU)
#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
#define _TIF_31BIT (1<<TIF_31BIT)
......
......@@ -53,6 +53,7 @@ _TIF_WORK_SVC = (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED | \
_TIF_MCCK_PENDING | _TIF_RESTART_SVC | _TIF_SINGLE_STEP )
_TIF_WORK_INT = (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED | \
_TIF_MCCK_PENDING)
_TIF_SYSCALL = (_TIF_SYSCALL_TRACE>>8 | _TIF_SYSCALL_AUDIT>>8 | _TIF_SECCOMP>>8)
STACK_SHIFT = PAGE_SHIFT + THREAD_ORDER
STACK_SIZE = 1 << STACK_SHIFT
......@@ -265,7 +266,7 @@ sysc_do_restart:
sth %r7,SP_SVCNR(%r15)
sll %r7,2 # svc number *4
l %r8,BASED(.Lsysc_table)
tm __TI_flags+3(%r9),(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT)
tm __TI_flags+2(%r9),_TIF_SYSCALL
l %r8,0(%r7,%r8) # get system call addr.
bnz BASED(sysc_tracesys)
basr %r14,%r8 # call sys_xxxx
......@@ -405,7 +406,7 @@ sysc_tracego:
basr %r14,%r8 # call sys_xxx
st %r2,SP_R2(%r15) # store return value
sysc_tracenogo:
tm __TI_flags+3(%r9),(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT)
tm __TI_flags+2(%r9),_TIF_SYSCALL
bz BASED(sysc_return)
l %r1,BASED(.Ltrace_exit)
la %r2,SP_PTREGS(%r15) # load pt_regs
......
......@@ -56,6 +56,7 @@ _TIF_WORK_SVC = (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED | \
_TIF_MCCK_PENDING | _TIF_RESTART_SVC | _TIF_SINGLE_STEP )
_TIF_WORK_INT = (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED | \
_TIF_MCCK_PENDING)
_TIF_SYSCALL = (_TIF_SYSCALL_TRACE>>8 | _TIF_SYSCALL_AUDIT>>8 | _TIF_SECCOMP>>8)
#define BASED(name) name-system_call(%r13)
......@@ -260,7 +261,7 @@ sysc_do_restart:
larl %r10,sys_call_table_emu # use 31 bit emulation system calls
sysc_noemu:
#endif
tm __TI_flags+7(%r9),(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT)
tm __TI_flags+6(%r9),_TIF_SYSCALL
lgf %r8,0(%r7,%r10) # load address of system call routine
jnz sysc_tracesys
basr %r14,%r8 # call sys_xxxx
......@@ -391,7 +392,7 @@ sysc_tracego:
basr %r14,%r8 # call sys_xxx
stg %r2,SP_R2(%r15) # store return value
sysc_tracenogo:
tm __TI_flags+7(%r9),(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT)
tm __TI_flags+6(%r9),_TIF_SYSCALL
jz sysc_return
la %r2,SP_PTREGS(%r15) # load pt_regs
larl %r14,sysc_return # return point is sysc_return
......
......@@ -36,7 +36,8 @@
#include <linux/elf.h>
#include <linux/regset.h>
#include <linux/tracehook.h>
#include <linux/compat.h>
#include <linux/seccomp.h>
#include <asm/compat.h>
#include <asm/segment.h>
#include <asm/page.h>
#include <asm/pgtable.h>
......@@ -640,6 +641,9 @@ asmlinkage long do_syscall_trace_enter(struct pt_regs *regs)
{
long ret;
/* Do the secure computing check first. */
secure_computing(regs->gprs[2]);
/*
* The sysc_tracesys code in entry.S stored the system
* call number to gprs[2].
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment