Merge tag 'arm-soc/for-4.12/devicetree-arm64' of http://github.com/Broadcom/stblinux into next/dt64

Pull "Broadcom devicetree-arm64 changes for 4.12" from Florian Fainelli:

This pull request contains Broadcom ARM64-based SoCs Device Tree updates for
4.12, please pull the following:

- Rob enables the cryptographic block on Northstar 2 (SPU) by adding the proper
  Device Tree nodes

- Jon replaces all occurences of: status = "ok" with status = "okay" to better
  conform to the Device Tree specification

* tag 'arm-soc/for-4.12/devicetree-arm64' of http://github.com/Broadcom/stblinux:
  arm64: dts: NS2: convert "ok" to "okay"
  arm64: dts: NS2: Add Broadcom SPU driver DT entry

arch/arm64/boot/dts/broadcom/ns2-svk.dts

@@ -57,55 +57,55 @@ memory {
 };
 
 &enet {
-	status = "ok";
+	status = "okay";
 };
 
 &pci_phy0 {
-	status = "ok";
+	status = "okay";
 };
 
 &pci_phy1 {
-	status = "ok";
+	status = "okay";
 };
 
 &pcie0 {
-	status = "ok";
+	status = "okay";
 };
 
 &pcie4 {
-	status = "ok";
+	status = "okay";
 };
 
 &pcie8 {
-	status = "ok";
+	status = "okay";
 };
 
 &i2c0 {
-	status = "ok";
+	status = "okay";
 };
 
 &i2c1 {
-	status = "ok";
+	status = "okay";
 };
 
 &uart0 {
-	status = "ok";
+	status = "okay";
 };
 
 &uart1 {
-	status = "ok";
+	status = "okay";
 };
 
 &uart2 {
-	status = "ok";
+	status = "okay";
 };
 
 &uart3 {
-	status = "ok";
+	status = "okay";
 };
 
 &ssp0 {
-	status = "ok";
+	status = "okay";
 
 	slic@0 {
 		compatible = "silabs,si3226x";
@@ -126,7 +126,7 @@ slic@0 {
 };
 
 &ssp1 {
-	status = "ok";
+	status = "okay";
 
 	at25@0 {
 		compatible = "atmel,at25";
@@ -150,23 +150,23 @@ at25@0 {
 };
 
 &sata_phy0 {
-	status = "ok";
+	status = "okay";
 };
 
 &sata_phy1 {
-	status = "ok";
+	status = "okay";
 };
 
 &sata {
-	status = "ok";
+	status = "okay";
 };
 
 &sdio0 {
-	status = "ok";
+	status = "okay";
 };
 
 &sdio1 {
-	status = "ok";
+	status = "okay";
 };
 
 &nand {

arch/arm64/boot/dts/broadcom/ns2-xmc.dts

@@ -54,15 +54,15 @@ memory {
 };
 
 &enet {
-	status = "ok";
+	status = "okay";
 };
 
 &i2c0 {
-	status = "ok";
+	status = "okay";
 };
 
 &i2c1 {
-	status = "ok";
+	status = "okay";
 };
 
 &mdio_mux_iproc {
@@ -122,27 +122,27 @@ partition@0a400000{
 };
 
 &pci_phy0 {
-	status = "ok";
+	status = "okay";
 };
 
 &pcie0 {
-	status = "ok";
+	status = "okay";
 };
 
 &pcie8 {
-	status = "ok";
+	status = "okay";
 };
 
 &sata_phy0 {
-	status = "ok";
+	status = "okay";
 };
 
 &sata_phy1 {
-	status = "ok";
+	status = "okay";
 };
 
 &sata {
-	status = "ok";
+	status = "okay";
 };
 
 &qspi {
@@ -187,5 +187,5 @@ partition@1000000 {
 };
 
 &uart3 {
-	status = "ok";
+	status = "okay";
 };

arch/arm64/boot/dts/broadcom/ns2.dtsi

@@ -217,6 +217,12 @@ pdc0: iproc-pdc0@612c0000 {
 			brcm,use-bcm-hdr;
 		};
 
+		crypto0: crypto@612d0000 {
+			compatible = "brcm,spum-crypto";
+			reg = <0x612d0000 0x900>;
+			mboxes = <&pdc0 0>;
+		};
+
 		pdc1: iproc-pdc1@612e0000 {
 			compatible = "brcm,iproc-pdc-mbox";
 			reg = <0x612e0000 0x445>;  /* PDC FS1 regs */
@@ -226,6 +232,12 @@ pdc1: iproc-pdc1@612e0000 {
 			brcm,use-bcm-hdr;
 		};
 
+		crypto1: crypto@612f0000 {
+			compatible = "brcm,spum-crypto";
+			reg = <0x612f0000 0x900>;
+			mboxes = <&pdc1 0>;
+		};
+
 		pdc2: iproc-pdc2@61300000 {
 			compatible = "brcm,iproc-pdc-mbox";
 			reg = <0x61300000 0x445>;  /* PDC FS2 regs */
@@ -235,6 +247,12 @@ pdc2: iproc-pdc2@61300000 {
 			brcm,use-bcm-hdr;
 		};
 
+		crypto2: crypto@61310000 {
+			compatible = "brcm,spum-crypto";
+			reg = <0x61310000 0x900>;
+			mboxes = <&pdc2 0>;
+		};
+
 		pdc3: iproc-pdc3@61320000 {
 			compatible = "brcm,iproc-pdc-mbox";
 			reg = <0x61320000 0x445>;  /* PDC FS3 regs */
@@ -244,6 +262,12 @@ pdc3: iproc-pdc3@61320000 {
 			brcm,use-bcm-hdr;
 		};
 
+		crypto3: crypto@61330000 {
+			compatible = "brcm,spum-crypto";
+			reg = <0x61330000 0x900>;
+			mboxes = <&pdc3 0>;
+		};
+
 		dma0: dma@61360000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x61360000 0x1000>;