Commit be0418ad authored by Sujith's avatar Sujith Committed by John W. Linville

ath9k: Revamp RX handling

Remove a lot of old, crufty code and make
RX status reporting a bit sane and clean.

Do not do anything to the RX skb before unmapping.
So in ath_rx_tasklet(), move the skb_put() after PCI unmap.
Signed-off-by: default avatarSujith <Sujith.Manoharan@atheros.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 2b406f1e
...@@ -279,13 +279,6 @@ struct ath_descdma { ...@@ -279,13 +279,6 @@ struct ath_descdma {
dma_addr_t dd_dmacontext; dma_addr_t dd_dmacontext;
}; };
/* Abstraction of a received RX MPDU/MMPDU, or a RX fragment */
struct ath_rx_context {
struct ath_buf *ctx_rxbuf; /* associated ath_buf for rx */
};
#define ATH_RX_CONTEXT(skb) ((struct ath_rx_context *)skb->cb)
int ath_descdma_setup(struct ath_softc *sc, int ath_descdma_setup(struct ath_softc *sc,
struct ath_descdma *dd, struct ath_descdma *dd,
struct list_head *head, struct list_head *head,
...@@ -298,61 +291,21 @@ void ath_descdma_cleanup(struct ath_softc *sc, ...@@ -298,61 +291,21 @@ void ath_descdma_cleanup(struct ath_softc *sc,
struct ath_descdma *dd, struct ath_descdma *dd,
struct list_head *head); struct list_head *head);
/******/ /***********/
/* RX */ /* RX / TX */
/******/ /***********/
#define ATH_MAX_ANTENNA 3 #define ATH_MAX_ANTENNA 3
#define ATH_RXBUF 512 #define ATH_RXBUF 512
#define WME_NUM_TID 16 #define WME_NUM_TID 16
/* per frame rx status block */
struct ath_recv_status {
u64 tsf; /* mac tsf */
int8_t rssi; /* RSSI (noise floor ajusted) */
int8_t rssictl[ATH_MAX_ANTENNA]; /* RSSI (noise floor ajusted) */
int8_t rssiextn[ATH_MAX_ANTENNA]; /* RSSI (noise floor ajusted) */
int8_t abs_rssi; /* absolute RSSI */
u8 rateieee; /* data rate received (IEEE rate code) */
u8 ratecode; /* phy rate code */
int rateKbps; /* data rate received (Kbps) */
int antenna; /* rx antenna */
int flags; /* status of associated skb */
#define ATH_RX_FCS_ERROR 0x01
#define ATH_RX_MIC_ERROR 0x02
#define ATH_RX_DECRYPT_ERROR 0x04
#define ATH_RX_RSSI_VALID 0x08
/* if any of ctl,extn chainrssis are valid */
#define ATH_RX_CHAIN_RSSI_VALID 0x10
/* if extn chain rssis are valid */
#define ATH_RX_RSSI_EXTN_VALID 0x20
/* set if 40Mhz, clear if 20Mhz */
#define ATH_RX_40MHZ 0x40
/* set if short GI, clear if full GI */
#define ATH_RX_SHORT_GI 0x80
};
struct ath_rxbuf {
struct sk_buff *rx_wbuf;
unsigned long rx_time; /* system time when received */
struct ath_recv_status rx_status; /* cached rx status */
};
int ath_startrecv(struct ath_softc *sc); int ath_startrecv(struct ath_softc *sc);
bool ath_stoprecv(struct ath_softc *sc); bool ath_stoprecv(struct ath_softc *sc);
void ath_flushrecv(struct ath_softc *sc); void ath_flushrecv(struct ath_softc *sc);
u32 ath_calcrxfilter(struct ath_softc *sc); u32 ath_calcrxfilter(struct ath_softc *sc);
void ath_handle_rx_intr(struct ath_softc *sc);
int ath_rx_init(struct ath_softc *sc, int nbufs); int ath_rx_init(struct ath_softc *sc, int nbufs);
void ath_rx_cleanup(struct ath_softc *sc); void ath_rx_cleanup(struct ath_softc *sc);
int ath_rx_tasklet(struct ath_softc *sc, int flush); int ath_rx_tasklet(struct ath_softc *sc, int flush);
int _ath_rx_indicate(struct ath_softc *sc,
struct sk_buff *skb,
struct ath_recv_status *status,
u16 keyix);
/******/
/* TX */
/******/
#define ATH_TXBUF 512 #define ATH_TXBUF 512
/* max number of transmit attempts (tries) */ /* max number of transmit attempts (tries) */
......
...@@ -236,68 +236,6 @@ static void setup_ht_cap(struct ieee80211_sta_ht_cap *ht_info) ...@@ -236,68 +236,6 @@ static void setup_ht_cap(struct ieee80211_sta_ht_cap *ht_info)
ht_info->mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED; ht_info->mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED;
} }
static int ath_rate2idx(struct ath_softc *sc, int rate)
{
int i = 0, cur_band, n_rates;
struct ieee80211_hw *hw = sc->hw;
cur_band = hw->conf.channel->band;
n_rates = sc->sbands[cur_band].n_bitrates;
for (i = 0; i < n_rates; i++) {
if (sc->sbands[cur_band].bitrates[i].bitrate == rate)
break;
}
/*
* NB:mac80211 validates rx rate index against the supported legacy rate
* index only (should be done against ht rates also), return the highest
* legacy rate index for rx rate which does not match any one of the
* supported basic and extended rates to make mac80211 happy.
* The following hack will be cleaned up once the issue with
* the rx rate index validation in mac80211 is fixed.
*/
if (i == n_rates)
return n_rates - 1;
return i;
}
static void ath9k_rx_prepare(struct ath_softc *sc,
struct sk_buff *skb,
struct ath_recv_status *status,
struct ieee80211_rx_status *rx_status)
{
struct ieee80211_hw *hw = sc->hw;
struct ieee80211_channel *curchan = hw->conf.channel;
memset(rx_status, 0, sizeof(struct ieee80211_rx_status));
rx_status->mactime = status->tsf;
rx_status->band = curchan->band;
rx_status->freq = curchan->center_freq;
rx_status->noise = sc->sc_ani.sc_noise_floor;
rx_status->signal = rx_status->noise + status->rssi;
rx_status->rate_idx = ath_rate2idx(sc, (status->rateKbps / 100));
rx_status->antenna = status->antenna;
/* at 45 you will be able to use MCS 15 reliably. A more elaborate
* scheme can be used here but it requires tables of SNR/throughput for
* each possible mode used. */
rx_status->qual = status->rssi * 100 / 45;
/* rssi can be more than 45 though, anything above that
* should be considered at 100% */
if (rx_status->qual > 100)
rx_status->qual = 100;
if (status->flags & ATH_RX_MIC_ERROR)
rx_status->flag |= RX_FLAG_MMIC_ERROR;
if (status->flags & ATH_RX_FCS_ERROR)
rx_status->flag |= RX_FLAG_FAILED_FCS_CRC;
rx_status->flag |= RX_FLAG_TSFT;
}
static void ath9k_ht_conf(struct ath_softc *sc, static void ath9k_ht_conf(struct ath_softc *sc,
struct ieee80211_bss_conf *bss_conf) struct ieee80211_bss_conf *bss_conf)
{ {
...@@ -440,44 +378,6 @@ void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb, ...@@ -440,44 +378,6 @@ void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb,
ieee80211_tx_status(hw, skb); ieee80211_tx_status(hw, skb);
} }
int _ath_rx_indicate(struct ath_softc *sc,
struct sk_buff *skb,
struct ath_recv_status *status,
u16 keyix)
{
struct ieee80211_hw *hw = sc->hw;
struct ieee80211_rx_status rx_status;
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
int hdrlen = ieee80211_get_hdrlen_from_skb(skb);
int padsize;
/* see if any padding is done by the hw and remove it */
if (hdrlen & 3) {
padsize = hdrlen % 4;
memmove(skb->data + padsize, skb->data, hdrlen);
skb_pull(skb, padsize);
}
/* Prepare rx status */
ath9k_rx_prepare(sc, skb, status, &rx_status);
if (!(keyix == ATH9K_RXKEYIX_INVALID) &&
!(status->flags & ATH_RX_DECRYPT_ERROR)) {
rx_status.flag |= RX_FLAG_DECRYPTED;
} else if ((le16_to_cpu(hdr->frame_control) & IEEE80211_FCTL_PROTECTED)
&& !(status->flags & ATH_RX_DECRYPT_ERROR)
&& skb->len >= hdrlen + 4) {
keyix = skb->data[hdrlen + 3] >> 6;
if (test_bit(keyix, sc->sc_keymap))
rx_status.flag |= RX_FLAG_DECRYPTED;
}
__ieee80211_rx(hw, skb, &rx_status);
return 0;
}
/********************************/ /********************************/
/* LED functions */ /* LED functions */
/********************************/ /********************************/
......
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment