Commit bef1f402 authored by Robert P. J. Day's avatar Robert P. J. Day Committed by Adrian Bunk

kconfig: Standardize "depends" -> "depends on" in Kconfig files

Standardize the miniscule percentage of occurrences of "depends" in
Kconfig files to "depends on", and update kconfig-language.txt to
reflect that.
Signed-off-by: default avatarRobert P. J. Day <rpjday@mindspring.com>
Signed-off-by: default avatarAdrian Bunk <bunk@stusta.de>
parent c48e3fca
...@@ -29,7 +29,7 @@ them. A single configuration option is defined like this: ...@@ -29,7 +29,7 @@ them. A single configuration option is defined like this:
config MODVERSIONS config MODVERSIONS
bool "Set version information on all module symbols" bool "Set version information on all module symbols"
depends MODULES depends on MODULES
help help
Usually, modules have to be recompiled whenever you switch to a new Usually, modules have to be recompiled whenever you switch to a new
kernel. ... kernel. ...
...@@ -163,7 +163,7 @@ The position of a menu entry in the tree is determined in two ways. First ...@@ -163,7 +163,7 @@ The position of a menu entry in the tree is determined in two ways. First
it can be specified explicitly: it can be specified explicitly:
menu "Network device support" menu "Network device support"
depends NET depends on NET
config NETDEVICES config NETDEVICES
... ...
...@@ -188,10 +188,10 @@ config MODULES ...@@ -188,10 +188,10 @@ config MODULES
config MODVERSIONS config MODVERSIONS
bool "Set version information on all module symbols" bool "Set version information on all module symbols"
depends MODULES depends on MODULES
comment "module support disabled" comment "module support disabled"
depends !MODULES depends on !MODULES
MODVERSIONS directly depends on MODULES, this means it's only visible if MODVERSIONS directly depends on MODULES, this means it's only visible if
MODULES is different from 'n'. The comment on the other hand is always MODULES is different from 'n'. The comment on the other hand is always
......
...@@ -75,28 +75,28 @@ endmenu ...@@ -75,28 +75,28 @@ endmenu
config MACH_POODLE config MACH_POODLE
bool "Enable Sharp SL-5600 (Poodle) Support" bool "Enable Sharp SL-5600 (Poodle) Support"
depends PXA_SHARPSL_25x depends on PXA_SHARPSL_25x
select SHARP_LOCOMO select SHARP_LOCOMO
select PXA_SSP select PXA_SSP
config MACH_CORGI config MACH_CORGI
bool "Enable Sharp SL-C700 (Corgi) Support" bool "Enable Sharp SL-C700 (Corgi) Support"
depends PXA_SHARPSL_25x depends on PXA_SHARPSL_25x
select PXA_SHARP_C7xx select PXA_SHARP_C7xx
config MACH_SHEPHERD config MACH_SHEPHERD
bool "Enable Sharp SL-C750 (Shepherd) Support" bool "Enable Sharp SL-C750 (Shepherd) Support"
depends PXA_SHARPSL_25x depends on PXA_SHARPSL_25x
select PXA_SHARP_C7xx select PXA_SHARP_C7xx
config MACH_HUSKY config MACH_HUSKY
bool "Enable Sharp SL-C760 (Husky) Support" bool "Enable Sharp SL-C760 (Husky) Support"
depends PXA_SHARPSL_25x depends on PXA_SHARPSL_25x
select PXA_SHARP_C7xx select PXA_SHARP_C7xx
config MACH_AKITA config MACH_AKITA
bool "Enable Sharp SL-1000 (Akita) Support" bool "Enable Sharp SL-1000 (Akita) Support"
depends PXA_SHARPSL_27x depends on PXA_SHARPSL_27x
select PXA_SHARP_Cxx00 select PXA_SHARP_Cxx00
select MACH_SPITZ select MACH_SPITZ
select I2C select I2C
...@@ -104,17 +104,17 @@ config MACH_AKITA ...@@ -104,17 +104,17 @@ config MACH_AKITA
config MACH_SPITZ config MACH_SPITZ
bool "Enable Sharp Zaurus SL-3000 (Spitz) Support" bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
depends PXA_SHARPSL_27x depends on PXA_SHARPSL_27x
select PXA_SHARP_Cxx00 select PXA_SHARP_Cxx00
config MACH_BORZOI config MACH_BORZOI
bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support" bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
depends PXA_SHARPSL_27x depends on PXA_SHARPSL_27x
select PXA_SHARP_Cxx00 select PXA_SHARP_Cxx00
config MACH_TOSA config MACH_TOSA
bool "Enable Sharp SL-6000x (Tosa) Support" bool "Enable Sharp SL-6000x (Tosa) Support"
depends PXA_SHARPSL_25x depends on PXA_SHARPSL_25x
config PXA25x config PXA25x
bool bool
......
...@@ -113,7 +113,7 @@ endchoice ...@@ -113,7 +113,7 @@ endchoice
config OMAP_SERIAL_WAKE config OMAP_SERIAL_WAKE
bool "Enable wake-up events for serial ports" bool "Enable wake-up events for serial ports"
depends OMAP_MUX depends on OMAP_MUX
default y default y
help help
Select this option if you want to have your system wake up Select this option if you want to have your system wake up
......
...@@ -179,7 +179,7 @@ config BIOS_FIXUP ...@@ -179,7 +179,7 @@ config BIOS_FIXUP
# OAK doesn't exist but wanted to keep this around for any future 403GCX boards # OAK doesn't exist but wanted to keep this around for any future 403GCX boards
config 403GCX config 403GCX
bool bool
depends OAK depends on OAK
default y default y
config 405EP config 405EP
......
...@@ -35,7 +35,7 @@ config HDPU ...@@ -35,7 +35,7 @@ config HDPU
Select HDPU if configuring a Sky Computers Compute Blade. Select HDPU if configuring a Sky Computers Compute Blade.
config HDPU_FEATURES config HDPU_FEATURES
depends HDPU depends on HDPU
tristate "HDPU-Features" tristate "HDPU-Features"
help help
Select to enable HDPU enhanced features. Select to enable HDPU enhanced features.
......
...@@ -624,7 +624,7 @@ config HDPU ...@@ -624,7 +624,7 @@ config HDPU
Select HDPU if configuring a Sky Computers Compute Blade. Select HDPU if configuring a Sky Computers Compute Blade.
config HDPU_FEATURES config HDPU_FEATURES
depends HDPU depends on HDPU
tristate "HDPU-Features" tristate "HDPU-Features"
help help
Select to enable HDPU enhanced features. Select to enable HDPU enhanced features.
...@@ -735,7 +735,7 @@ config LITE5200 ...@@ -735,7 +735,7 @@ config LITE5200
config LITE5200B config LITE5200B
bool "Freescale LITE5200B" bool "Freescale LITE5200B"
depends LITE5200 depends on LITE5200
help help
Support for the LITE5200B dev board for the MPC5200 from Freescale. Support for the LITE5200B dev board for the MPC5200 from Freescale.
This is the new board with 2 PCI slots. This is the new board with 2 PCI slots.
......
...@@ -189,7 +189,7 @@ config BIOS_FIXUP ...@@ -189,7 +189,7 @@ config BIOS_FIXUP
# OAK doesn't exist but wanted to keep this around for any future 403GCX boards # OAK doesn't exist but wanted to keep this around for any future 403GCX boards
config 403GCX config 403GCX
bool bool
depends OAK depends on OAK
default y default y
config 405EP config 405EP
......
...@@ -105,17 +105,17 @@ menu "Processor type and features" ...@@ -105,17 +105,17 @@ menu "Processor type and features"
# currently support # currently support
config V850E_MA1 config V850E_MA1
bool bool
depends RTE_CB_MA1 depends on RTE_CB_MA1
default y default y
# Similarly for the RTE-V850E/NB85E-CB - V850E/TEG # Similarly for the RTE-V850E/NB85E-CB - V850E/TEG
config V850E_TEG config V850E_TEG
bool bool
depends RTE_CB_NB85E depends on RTE_CB_NB85E
default y default y
# ... and the RTE-V850E/ME2-CB - V850E/ME2 # ... and the RTE-V850E/ME2-CB - V850E/ME2
config V850E_ME2 config V850E_ME2
bool bool
depends RTE_CB_ME2 depends on RTE_CB_ME2
default y default y
...@@ -123,7 +123,7 @@ menu "Processor type and features" ...@@ -123,7 +123,7 @@ menu "Processor type and features"
config V850E2_SIM85E2 config V850E2_SIM85E2
bool bool
depends V850E2_SIM85E2C || V850E2_SIM85E2S depends on V850E2_SIM85E2C || V850E2_SIM85E2S
default y default y
...@@ -132,7 +132,7 @@ menu "Processor type and features" ...@@ -132,7 +132,7 @@ menu "Processor type and features"
# V850E2 processors # V850E2 processors
config V850E2 config V850E2
bool bool
depends V850E2_SIM85E2 || V850E2_FPGA85E2C || V850E2_ANNA depends on V850E2_SIM85E2 || V850E2_FPGA85E2C || V850E2_ANNA
default y default y
...@@ -141,7 +141,7 @@ menu "Processor type and features" ...@@ -141,7 +141,7 @@ menu "Processor type and features"
# Boards in the RTE-x-CB series # Boards in the RTE-x-CB series
config RTE_CB config RTE_CB
bool bool
depends RTE_CB_MA1 || RTE_CB_NB85E || RTE_CB_ME2 depends on RTE_CB_MA1 || RTE_CB_NB85E || RTE_CB_ME2
default y default y
config RTE_CB_MULTI config RTE_CB_MULTI
...@@ -149,28 +149,28 @@ menu "Processor type and features" ...@@ -149,28 +149,28 @@ menu "Processor type and features"
# RTE_CB_NB85E can either have multi ROM support or not, but # RTE_CB_NB85E can either have multi ROM support or not, but
# other platforms (currently only RTE_CB_MA1) require it. # other platforms (currently only RTE_CB_MA1) require it.
prompt "Multi monitor ROM support" if RTE_CB_NB85E prompt "Multi monitor ROM support" if RTE_CB_NB85E
depends RTE_CB_MA1 || RTE_CB_NB85E depends on RTE_CB_MA1 || RTE_CB_NB85E
default y default y
config RTE_CB_MULTI_DBTRAP config RTE_CB_MULTI_DBTRAP
bool "Pass illegal insn trap / dbtrap to kernel" bool "Pass illegal insn trap / dbtrap to kernel"
depends RTE_CB_MULTI depends on RTE_CB_MULTI
default n default n
config RTE_CB_MA1_KSRAM config RTE_CB_MA1_KSRAM
bool "Kernel in SRAM (limits size of kernel)" bool "Kernel in SRAM (limits size of kernel)"
depends RTE_CB_MA1 && RTE_CB_MULTI depends on RTE_CB_MA1 && RTE_CB_MULTI
default n default n
config RTE_MB_A_PCI config RTE_MB_A_PCI
bool "Mother-A PCI support" bool "Mother-A PCI support"
depends RTE_CB depends on RTE_CB
default y default y
# The GBUS is used to talk to the RTE-MOTHER-A board # The GBUS is used to talk to the RTE-MOTHER-A board
config RTE_GBUS_INT config RTE_GBUS_INT
bool bool
depends RTE_MB_A_PCI depends on RTE_MB_A_PCI
default y default y
# The only PCI bus we support is on the RTE-MOTHER-A board # The only PCI bus we support is on the RTE-MOTHER-A board
...@@ -209,7 +209,7 @@ menu "Processor type and features" ...@@ -209,7 +209,7 @@ menu "Processor type and features"
config ROM_KERNEL config ROM_KERNEL
bool "Kernel in ROM" bool "Kernel in ROM"
depends V850E2_ANNA || V850E_AS85EP1 || RTE_CB_ME2 depends on V850E2_ANNA || V850E_AS85EP1 || RTE_CB_ME2
# Some platforms pre-zero memory, in which case the kernel doesn't need to # Some platforms pre-zero memory, in which case the kernel doesn't need to
config ZERO_BSS config ZERO_BSS
...@@ -225,10 +225,10 @@ menu "Processor type and features" ...@@ -225,10 +225,10 @@ menu "Processor type and features"
config V850E_HIGHRES_TIMER config V850E_HIGHRES_TIMER
bool "High resolution timer support" bool "High resolution timer support"
depends V850E_TIMER_D depends on V850E_TIMER_D
config TIME_BOOTUP config TIME_BOOTUP
bool "Time bootup" bool "Time bootup"
depends V850E_HIGHRES_TIMER depends on V850E_HIGHRES_TIMER
config RESET_GUARD config RESET_GUARD
bool "Reset Guard" bool "Reset Guard"
......
...@@ -867,7 +867,7 @@ config SONYPI ...@@ -867,7 +867,7 @@ config SONYPI
config TANBAC_TB0219 config TANBAC_TB0219
tristate "TANBAC TB0219 base board support" tristate "TANBAC TB0219 base board support"
depends TANBAC_TB022X depends on TANBAC_TB022X
select GPIO_VR41XX select GPIO_VR41XX
source "drivers/char/agp/Kconfig" source "drivers/char/agp/Kconfig"
......
...@@ -796,7 +796,7 @@ endchoice ...@@ -796,7 +796,7 @@ endchoice
config BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ config BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ
int "Maximum transfer size (KB) per request (up to 128)" int "Maximum transfer size (KB) per request (up to 128)"
default "128" default "128"
depends BLK_DEV_IDE_AU1XXX depends on BLK_DEV_IDE_AU1XXX
config IDE_ARM config IDE_ARM
def_bool ARM && (ARCH_A5K || ARCH_CLPS7500 || ARCH_RPC || ARCH_SHARK) def_bool ARM && (ARCH_A5K || ARCH_CLPS7500 || ARCH_RPC || ARCH_SHARK)
......
...@@ -12,7 +12,7 @@ config NEW_LEDS ...@@ -12,7 +12,7 @@ config NEW_LEDS
config LEDS_CLASS config LEDS_CLASS
tristate "LED Class Support" tristate "LED Class Support"
depends NEW_LEDS depends on NEW_LEDS
help help
This option enables the led sysfs class in /sys/class/leds. You'll This option enables the led sysfs class in /sys/class/leds. You'll
need this to do anything useful with LEDs. If unsure, say N. need this to do anything useful with LEDs. If unsure, say N.
...@@ -21,28 +21,28 @@ comment "LED drivers" ...@@ -21,28 +21,28 @@ comment "LED drivers"
config LEDS_CORGI config LEDS_CORGI
tristate "LED Support for the Sharp SL-C7x0 series" tristate "LED Support for the Sharp SL-C7x0 series"
depends LEDS_CLASS && PXA_SHARP_C7xx depends on LEDS_CLASS && PXA_SHARP_C7xx
help help
This option enables support for the LEDs on Sharp Zaurus This option enables support for the LEDs on Sharp Zaurus
SL-C7x0 series (C700, C750, C760, C860). SL-C7x0 series (C700, C750, C760, C860).
config LEDS_LOCOMO config LEDS_LOCOMO
tristate "LED Support for Locomo device" tristate "LED Support for Locomo device"
depends LEDS_CLASS && SHARP_LOCOMO depends on LEDS_CLASS && SHARP_LOCOMO
help help
This option enables support for the LEDs on Sharp Locomo. This option enables support for the LEDs on Sharp Locomo.
Zaurus models SL-5500 and SL-5600. Zaurus models SL-5500 and SL-5600.
config LEDS_SPITZ config LEDS_SPITZ
tristate "LED Support for the Sharp SL-Cxx00 series" tristate "LED Support for the Sharp SL-Cxx00 series"
depends LEDS_CLASS && PXA_SHARP_Cxx00 depends on LEDS_CLASS && PXA_SHARP_Cxx00
help help
This option enables support for the LEDs on Sharp Zaurus This option enables support for the LEDs on Sharp Zaurus
SL-Cxx00 series (C1000, C3000, C3100). SL-Cxx00 series (C1000, C3000, C3100).
config LEDS_IXP4XX config LEDS_IXP4XX
tristate "LED Support for GPIO connected LEDs on IXP4XX processors" tristate "LED Support for GPIO connected LEDs on IXP4XX processors"
depends LEDS_CLASS && ARCH_IXP4XX depends on LEDS_CLASS && ARCH_IXP4XX
help help
This option enables support for the LEDs connected to GPIO This option enables support for the LEDs connected to GPIO
outputs of the Intel IXP4XX processors. To be useful the outputs of the Intel IXP4XX processors. To be useful the
...@@ -51,7 +51,7 @@ config LEDS_IXP4XX ...@@ -51,7 +51,7 @@ config LEDS_IXP4XX
config LEDS_TOSA config LEDS_TOSA
tristate "LED Support for the Sharp SL-6000 series" tristate "LED Support for the Sharp SL-6000 series"
depends LEDS_CLASS && PXA_SHARPSL depends on LEDS_CLASS && PXA_SHARPSL
help help
This option enables support for the LEDs on Sharp Zaurus This option enables support for the LEDs on Sharp Zaurus
SL-6000 series. SL-6000 series.
...@@ -65,7 +65,7 @@ config LEDS_S3C24XX ...@@ -65,7 +65,7 @@ config LEDS_S3C24XX
config LEDS_AMS_DELTA config LEDS_AMS_DELTA
tristate "LED Support for the Amstrad Delta (E3)" tristate "LED Support for the Amstrad Delta (E3)"
depends LEDS_CLASS && MACH_AMS_DELTA depends on LEDS_CLASS && MACH_AMS_DELTA
help help
This option enables support for the LEDs on Amstrad Delta (E3). This option enables support for the LEDs on Amstrad Delta (E3).
...@@ -86,7 +86,7 @@ comment "LED Triggers" ...@@ -86,7 +86,7 @@ comment "LED Triggers"
config LEDS_TRIGGERS config LEDS_TRIGGERS
bool "LED Trigger support" bool "LED Trigger support"
depends NEW_LEDS depends on NEW_LEDS
help help
This option enables trigger support for the leds class. This option enables trigger support for the leds class.
These triggers allow kernel events to drive the LEDs and can These triggers allow kernel events to drive the LEDs and can
...@@ -94,21 +94,21 @@ config LEDS_TRIGGERS ...@@ -94,21 +94,21 @@ config LEDS_TRIGGERS
config LEDS_TRIGGER_TIMER config LEDS_TRIGGER_TIMER
tristate "LED Timer Trigger" tristate "LED Timer Trigger"
depends LEDS_TRIGGERS depends on LEDS_TRIGGERS
help help
This allows LEDs to be controlled by a programmable timer This allows LEDs to be controlled by a programmable timer
via sysfs. If unsure, say Y. via sysfs. If unsure, say Y.
config LEDS_TRIGGER_IDE_DISK config LEDS_TRIGGER_IDE_DISK
bool "LED IDE Disk Trigger" bool "LED IDE Disk Trigger"
depends LEDS_TRIGGERS && BLK_DEV_IDEDISK depends on LEDS_TRIGGERS && BLK_DEV_IDEDISK
help help
This allows LEDs to be controlled by IDE disk activity. This allows LEDs to be controlled by IDE disk activity.
If unsure, say Y. If unsure, say Y.
config LEDS_TRIGGER_HEARTBEAT config LEDS_TRIGGER_HEARTBEAT
tristate "LED Heartbeat Trigger" tristate "LED Heartbeat Trigger"
depends LEDS_TRIGGERS depends on LEDS_TRIGGERS
help help
This allows LEDs to be controlled by a CPU load average. This allows LEDs to be controlled by a CPU load average.
The flash frequency is a hyperbolic function of the 1-minute The flash frequency is a hyperbolic function of the 1-minute
......
...@@ -663,7 +663,7 @@ config V850E_UART ...@@ -663,7 +663,7 @@ config V850E_UART
config V850E_UARTB config V850E_UARTB
bool bool
depends V850E_UART && V850E_ME2 depends on V850E_UART && V850E_ME2
default y default y
config V850E_UART_CONSOLE config V850E_UART_CONSOLE
...@@ -909,7 +909,7 @@ config SERIAL_M32R_PLDSIO ...@@ -909,7 +909,7 @@ config SERIAL_M32R_PLDSIO
config SERIAL_TXX9 config SERIAL_TXX9
bool "TMPTX39XX/49XX SIO support" bool "TMPTX39XX/49XX SIO support"
depends HAS_TXX9_SERIAL depends on HAS_TXX9_SERIAL
select SERIAL_CORE select SERIAL_CORE
default y default y
......
...@@ -1002,7 +1002,7 @@ config TMPFS_POSIX_ACL ...@@ -1002,7 +1002,7 @@ config TMPFS_POSIX_ACL
config HUGETLBFS config HUGETLBFS
bool "HugeTLB file system support" bool "HugeTLB file system support"
depends X86 || IA64 || PPC64 || SPARC64 || SUPERH || BROKEN depends on X86 || IA64 || PPC64 || SPARC64 || SUPERH || BROKEN
help help
hugetlbfs is a filesystem backing for HugeTLB pages, based on hugetlbfs is a filesystem backing for HugeTLB pages, based on
ramfs. For architectures that support it, say Y here and read ramfs. For architectures that support it, say Y here and read
......
config SND_AOA_FABRIC_LAYOUT config SND_AOA_FABRIC_LAYOUT
tristate "layout-id fabric" tristate "layout-id fabric"
depends SND_AOA depends on SND_AOA
select SND_AOA_SOUNDBUS select SND_AOA_SOUNDBUS
select SND_AOA_SOUNDBUS_I2S select SND_AOA_SOUNDBUS_I2S
---help--- ---help---
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment