Commit bef6229f authored by Maxime Ripard's avatar Maxime Ripard

ARM: sunxi: Add R8 support

The R8 is a new Allwinner SoC based on the A13. While both are very
similar, there's still a few differences. Introduce a new compatible to
deal with them.

In order to have a consistent naming, instead of mentioning the Allwinner
A series as the machine name, switch to sun4i/sun5i like what is done for
the other families.
Signed-off-by: default avatarMaxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: default avatarHans de Goede <hdegoede@redhat.com>
Reviewed-by: default avatarChen-Yu Tsai <wens@csie.org>
Acked-by: default avatarStephen Boyd <sboyd@codeaurora.org>
parent 6ff33f39
......@@ -25,7 +25,7 @@ SunXi family
+ Datasheet
http://dl.linux-sunxi.org/A10s/A10s%20Datasheet%20-%20v1.20%20%282012-03-27%29.pdf
- Allwinner A13 (sun5i)
- Allwinner A13 / R8 (sun5i)
+ Datasheet
http://dl.linux-sunxi.org/A13/A13%20Datasheet%20-%20v1.12%20%282012-03-29%29.pdf
+ User Manual
......
......@@ -6,6 +6,7 @@ using one of the following compatible strings:
allwinner,sun4i-a10
allwinner,sun5i-a10s
allwinner,sun5i-a13
allwinner,sun5i-r8
allwinner,sun6i-a31
allwinner,sun7i-a20
allwinner,sun8i-a23
......
......@@ -26,10 +26,11 @@ static const char * const sunxi_board_dt_compat[] = {
"allwinner,sun4i-a10",
"allwinner,sun5i-a10s",
"allwinner,sun5i-a13",
"allwinner,sun5i-r8",
NULL,
};
DT_MACHINE_START(SUNXI_DT, "Allwinner A1X (Device Tree)")
DT_MACHINE_START(SUNXI_DT, "Allwinner sun4i/sun5i Families")
.dt_compat = sunxi_board_dt_compat,
.init_late = sunxi_dt_cpufreq_init,
MACHINE_END
......
......@@ -1196,6 +1196,7 @@ static void __init sun5i_init_clocks(struct device_node *node)
}
CLK_OF_DECLARE(sun5i_a10s_clk_init, "allwinner,sun5i-a10s", sun5i_init_clocks);
CLK_OF_DECLARE(sun5i_a13_clk_init, "allwinner,sun5i-a13", sun5i_init_clocks);
CLK_OF_DECLARE(sun5i_r8_clk_init, "allwinner,sun5i-r8", sun5i_init_clocks);
CLK_OF_DECLARE(sun7i_a20_clk_init, "allwinner,sun7i-a20", sun5i_init_clocks);
static const char *sun6i_critical_clocks[] __initdata = {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment