Commit bf7c8234 authored by Kai Germaschewski's avatar Kai Germaschewski

Merge

parents 8af480ec 915a0c20
...@@ -558,34 +558,6 @@ CONFIG_CD_NO_IDESCSI ...@@ -558,34 +558,6 @@ CONFIG_CD_NO_IDESCSI
answer will get "defaulted" for you if you enable any of the Linux answer will get "defaulted" for you if you enable any of the Linux
CD-ROM drivers). CD-ROM drivers).
CONFIG_SOUND
If you have a sound card in your computer, i.e. if it can say more
than an occasional beep, say Y. Be sure to have all the information
about your sound card and its configuration down (I/O port,
interrupt and DMA channel), because you will be asked for it.
You want to read the Sound-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>. General information about
the modular sound system is contained in the files
<file:Documentation/sound/Introduction>. The file
<file:Documentation/sound/README.OSS> contains some slightly
outdated but still useful information as well.
If you have a PnP sound card and you want to configure it at boot
time using the ISA PnP tools (read
<http://www.roestock.demon.co.uk/isapnptools/>), then you need to
compile the sound card support as a module ( = code which can be
inserted in and removed from the running kernel whenever you want)
and load that module after the PnP configuration is finished. To do
this, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/sound/README.modules>; the module will be
called soundcore.o.
I'm told that even without a sound card, you can make your computer
say more than an occasional beep, by programming the PC speaker.
Kernel patches and supporting utilities to do that are in the pcsp
package, available at <ftp://ftp.infradead.org/pub/pcsp/>.
CONFIG_MAGIC_SYSRQ CONFIG_MAGIC_SYSRQ
If you say Y here, you will have some control over the system even If you say Y here, you will have some control over the system even
if the system crashes for example during kernel debugging (e.g., you if the system crashes for example during kernel debugging (e.g., you
......
...@@ -432,34 +432,6 @@ CONFIG_APM ...@@ -432,34 +432,6 @@ CONFIG_APM
and read <file:Documentation/modules.txt>. The module will be called and read <file:Documentation/modules.txt>. The module will be called
apm.o. apm.o.
CONFIG_SOUND
If you have a sound card in your computer, i.e. if it can say more
than an occasional beep, say Y. Be sure to have all the information
about your sound card and its configuration down (I/O port,
interrupt and DMA channel), because you will be asked for it.
You want to read the Sound-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>. General information about
the modular sound system is contained in the files
<file:Documentation/sound/Introduction>. The file
<file:Documentation/sound/README.OSS> contains some slightly
outdated but still useful information as well.
If you have a PnP sound card and you want to configure it at boot
time using the ISA PnP tools (read
<http://www.roestock.demon.co.uk/isapnptools/>), then you need to
compile the sound card support as a module ( = code which can be
inserted in and removed from the running kernel whenever you want)
and load that module after the PnP configuration is finished. To do
this, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/sound/README.modules>; the module will be
called soundcore.o.
I'm told that even without a sound card, you can make your computer
say more than an occasional beep, by programming the PC speaker.
Kernel patches and supporting utilities to do that are in the pcsp
package, available at <ftp://ftp.infradead.org/pub/pcsp/>.
CONFIG_MAGIC_SYSRQ CONFIG_MAGIC_SYSRQ
If you say Y here, you will have some control over the system even If you say Y here, you will have some control over the system even
if the system crashes for example during kernel debugging (e.g., you if the system crashes for example during kernel debugging (e.g., you
......
...@@ -143,34 +143,6 @@ CONFIG_CD_NO_IDESCSI ...@@ -143,34 +143,6 @@ CONFIG_CD_NO_IDESCSI
answer will get "defaulted" for you if you enable any of the Linux answer will get "defaulted" for you if you enable any of the Linux
CD-ROM drivers). CD-ROM drivers).
CONFIG_SOUND
If you have a sound card in your computer, i.e. if it can say more
than an occasional beep, say Y. Be sure to have all the information
about your sound card and its configuration down (I/O port,
interrupt and DMA channel), because you will be asked for it.
You want to read the Sound-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>. General information about
the modular sound system is contained in the files
<file:Documentation/sound/Introduction>. The file
<file:Documentation/sound/README.OSS> contains some slightly
outdated but still useful information as well.
If you have a PnP sound card and you want to configure it at boot
time using the ISA PnP tools (read
<http://www.roestock.demon.co.uk/isapnptools/>), then you need to
compile the sound card support as a module ( = code which can be
inserted in and removed from the running kernel whenever you want)
and load that module after the PnP configuration is finished. To do
this, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/sound/README.modules>; the module will be
called soundcore.o.
I'm told that even without a sound card, you can make your computer
say more than an occasional beep, by programming the PC speaker.
Kernel patches and supporting utilities to do that are in the pcsp
package, available at <ftp://ftp.infradead.org/pub/pcsp/>.
CONFIG_ETRAX100LX CONFIG_ETRAX100LX
Support version 1 of the Etrax 100LX. Support version 1 of the Etrax 100LX.
......
...@@ -861,34 +861,6 @@ CONFIG_X86_CPUID ...@@ -861,34 +861,6 @@ CONFIG_X86_CPUID
with major 203 and minors 0 to 31 for /dev/cpu/0/cpuid to with major 203 and minors 0 to 31 for /dev/cpu/0/cpuid to
/dev/cpu/31/cpuid. /dev/cpu/31/cpuid.
CONFIG_SOUND
If you have a sound card in your computer, i.e. if it can say more
than an occasional beep, say Y. Be sure to have all the information
about your sound card and its configuration down (I/O port,
interrupt and DMA channel), because you will be asked for it.
You want to read the Sound-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>. General information about
the modular sound system is contained in the files
<file:Documentation/sound/Introduction>. The file
<file:Documentation/sound/README.OSS> contains some slightly
outdated but still useful information as well.
If you have a PnP sound card and you want to configure it at boot
time using the ISA PnP tools (read
<http://www.roestock.demon.co.uk/isapnptools/>), then you need to
compile the sound card support as a module ( = code which can be
inserted in and removed from the running kernel whenever you want)
and load that module after the PnP configuration is finished. To do
this, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/sound/README.modules>; the module will be
called soundcore.o.
I'm told that even without a sound card, you can make your computer
say more than an occasional beep, by programming the PC speaker.
Kernel patches and supporting utilities to do that are in the pcsp
package, available at <ftp://ftp.infradead.org/pub/pcsp/>.
CONFIG_MAGIC_SYSRQ CONFIG_MAGIC_SYSRQ
If you say Y here, you will have some control over the system even If you say Y here, you will have some control over the system even
if the system crashes for example during kernel debugging (e.g., you if the system crashes for example during kernel debugging (e.g., you
......
...@@ -385,34 +385,6 @@ CONFIG_ACPI_KERNEL_CONFIG ...@@ -385,34 +385,6 @@ CONFIG_ACPI_KERNEL_CONFIG
If you say `Y' here, Linux's ACPI support will use the If you say `Y' here, Linux's ACPI support will use the
hardware-level system descriptions found on IA64 machines. hardware-level system descriptions found on IA64 machines.
CONFIG_SOUND
If you have a sound card in your computer, i.e. if it can say more
than an occasional beep, say Y. Be sure to have all the information
about your sound card and its configuration down (I/O port,
interrupt and DMA channel), because you will be asked for it.
You want to read the Sound-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>. General information about
the modular sound system is contained in the files
<file:Documentation/sound/Introduction>. The file
<file:Documentation/sound/README.OSS> contains some slightly
outdated but still useful information as well.
If you have a PnP sound card and you want to configure it at boot
time using the ISA PnP tools (read
<http://www.roestock.demon.co.uk/isapnptools/>), then you need to
compile the sound card support as a module ( = code which can be
inserted in and removed from the running kernel whenever you want)
and load that module after the PnP configuration is finished. To do
this, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/sound/README.modules>; the module will be
called soundcore.o.
I'm told that even without a sound card, you can make your computer
say more than an occasional beep, by programming the PC speaker.
Kernel patches and supporting utilities to do that are in the pcsp
package, available at <ftp://ftp.infradead.org/pub/pcsp/>.
CONFIG_MAGIC_SYSRQ CONFIG_MAGIC_SYSRQ
If you say Y here, you will have some control over the system even If you say Y here, you will have some control over the system even
if the system crashes for example during kernel debugging (e.g., you if the system crashes for example during kernel debugging (e.g., you
......
...@@ -1093,34 +1093,6 @@ CONFIG_NVRAM ...@@ -1093,34 +1093,6 @@ CONFIG_NVRAM
The module will be called nvram.o. If you want to compile it as a The module will be called nvram.o. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>. module, say M here and read <file:Documentation/modules.txt>.
CONFIG_SOUND
If you have a sound card in your computer, i.e. if it can say more
than an occasional beep, say Y. Be sure to have all the information
about your sound card and its configuration down (I/O port,
interrupt and DMA channel), because you will be asked for it.
You want to read the Sound-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>. General information about
the modular sound system is contained in the files
<file:Documentation/sound/Introduction>. The file
<file:Documentation/sound/README.OSS> contains some slightly
outdated but still useful information as well.
If you have a PnP sound card and you want to configure it at boot
time using the ISA PnP tools (read
<http://www.roestock.demon.co.uk/isapnptools/>), then you need to
compile the sound card support as a module ( = code which can be
inserted in and removed from the running kernel whenever you want)
and load that module after the PnP configuration is finished. To do
this, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/sound/README.modules>; the module will be
called soundcore.o.
I'm told that even without a sound card, you can make your computer
say more than an occasional beep, by programming the PC speaker.
Kernel patches and supporting utilities to do that are in the pcsp
package, available at <ftp://ftp.infradead.org/pub/pcsp/>.
CONFIG_MAGIC_SYSRQ CONFIG_MAGIC_SYSRQ
If you say Y here, you will have some control over the system even If you say Y here, you will have some control over the system even
if the system crashes for example during kernel debugging (e.g., you if the system crashes for example during kernel debugging (e.g., you
......
...@@ -785,34 +785,6 @@ CONFIG_RTC ...@@ -785,34 +785,6 @@ CONFIG_RTC
The module is called rtc.o. If you want to compile it as a module, The module is called rtc.o. If you want to compile it as a module,
say M here and read <file:Documentation/modules.txt>. say M here and read <file:Documentation/modules.txt>.
CONFIG_SOUND
If you have a sound card in your computer, i.e. if it can say more
than an occasional beep, say Y. Be sure to have all the information
about your sound card and its configuration down (I/O port,
interrupt and DMA channel), because you will be asked for it.
You want to read the Sound-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>. General information about
the modular sound system is contained in the files
<file:Documentation/sound/Introduction>. The file
<file:Documentation/sound/README.OSS> contains some slightly
outdated but still useful information as well.
If you have a PnP sound card and you want to configure it at boot
time using the ISA PnP tools (read
<http://www.roestock.demon.co.uk/isapnptools/>), then you need to
compile the sound card support as a module ( = code which can be
inserted in and removed from the running kernel whenever you want)
and load that module after the PnP configuration is finished. To do
this, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/sound/README.modules>; the module will be
called soundcore.o.
I'm told that even without a sound card, you can make your computer
say more than an occasional beep, by programming the PC speaker.
Kernel patches and supporting utilities to do that are in the pcsp
package, available at <ftp://ftp.infradead.org/pub/pcsp/>.
CONFIG_CROSSCOMPILE CONFIG_CROSSCOMPILE
Say Y here if you are compiling the kernel on a different Say Y here if you are compiling the kernel on a different
architecture than the one it is intended to run on. architecture than the one it is intended to run on.
......
...@@ -371,34 +371,6 @@ CONFIG_CD_NO_IDESCSI ...@@ -371,34 +371,6 @@ CONFIG_CD_NO_IDESCSI
answer will get "defaulted" for you if you enable any of the Linux answer will get "defaulted" for you if you enable any of the Linux
CD-ROM drivers). CD-ROM drivers).
CONFIG_SOUND
If you have a sound card in your computer, i.e. if it can say more
than an occasional beep, say Y. Be sure to have all the information
about your sound card and its configuration down (I/O port,
interrupt and DMA channel), because you will be asked for it.
You want to read the Sound-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>. General information about
the modular sound system is contained in the files
<file:Documentation/sound/Introduction>. The file
<file:Documentation/sound/README.OSS> contains some slightly
outdated but still useful information as well.
If you have a PnP sound card and you want to configure it at boot
time using the ISA PnP tools (read
<http://www.roestock.demon.co.uk/isapnptools/>), then you need to
compile the sound card support as a module ( = code which can be
inserted in and removed from the running kernel whenever you want)
and load that module after the PnP configuration is finished. To do
this, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/sound/README.modules>; the module will be
called soundcore.o.
I'm told that even without a sound card, you can make your computer
say more than an occasional beep, by programming the PC speaker.
Kernel patches and supporting utilities to do that are in the pcsp
package, available at <ftp://ftp.infradead.org/pub/pcsp/>.
CONFIG_CROSSCOMPILE CONFIG_CROSSCOMPILE
Say Y here if you are compiling the kernel on a different Say Y here if you are compiling the kernel on a different
architecture than the one it is intended to run on. architecture than the one it is intended to run on.
......
...@@ -476,34 +476,6 @@ CONFIG_STI_CONSOLE ...@@ -476,34 +476,6 @@ CONFIG_STI_CONSOLE
machines. Say Y here to build support for it into your kernel. machines. Say Y here to build support for it into your kernel.
The alternative is to use your primary serial port as a console. The alternative is to use your primary serial port as a console.
CONFIG_SOUND
If you have a sound card in your computer, i.e. if it can say more
than an occasional beep, say Y. Be sure to have all the information
about your sound card and its configuration down (I/O port,
interrupt and DMA channel), because you will be asked for it.
You want to read the Sound-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>. General information about
the modular sound system is contained in the files
<file:Documentation/sound/Introduction>. The file
<file:Documentation/sound/README.OSS> contains some slightly
outdated but still useful information as well.
If you have a PnP sound card and you want to configure it at boot
time using the ISA PnP tools (read
<http://www.roestock.demon.co.uk/isapnptools/>), then you need to
compile the sound card support as a module ( = code which can be
inserted in and removed from the running kernel whenever you want)
and load that module after the PnP configuration is finished. To do
this, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/sound/README.modules>; the module will be
called soundcore.o.
I'm told that even without a sound card, you can make your computer
say more than an occasional beep, by programming the PC speaker.
Kernel patches and supporting utilities to do that are in the pcsp
package, available at <ftp://ftp.infradead.org/pub/pcsp/>.
CONFIG_MAGIC_SYSRQ CONFIG_MAGIC_SYSRQ
If you say Y here, you will have some control over the system even If you say Y here, you will have some control over the system even
if the system crashes for example during kernel debugging (e.g., you if the system crashes for example during kernel debugging (e.g., you
......
...@@ -512,34 +512,6 @@ CONFIG_MOUSE ...@@ -512,34 +512,6 @@ CONFIG_MOUSE
kernel: saying N will just cause the configurator to skip all kernel: saying N will just cause the configurator to skip all
the questions about non-serial mice. If unsure, say Y. the questions about non-serial mice. If unsure, say Y.
CONFIG_SOUND
If you have a sound card in your computer, i.e. if it can say more
than an occasional beep, say Y. Be sure to have all the information
about your sound card and its configuration down (I/O port,
interrupt and DMA channel), because you will be asked for it.
You want to read the Sound-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>. General information about
the modular sound system is contained in the files
<file:Documentation/sound/Introduction>. The file
<file:Documentation/sound/README.OSS> contains some slightly
outdated but still useful information as well.
If you have a PnP sound card and you want to configure it at boot
time using the ISA PnP tools (read
<http://www.roestock.demon.co.uk/isapnptools/>), then you need to
compile the sound card support as a module ( = code which can be
inserted in and removed from the running kernel whenever you want)
and load that module after the PnP configuration is finished. To do
this, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/sound/README.modules>; the module will be
called soundcore.o.
I'm told that even without a sound card, you can make your computer
say more than an occasional beep, by programming the PC speaker.
Kernel patches and supporting utilities to do that are in the pcsp
package, available at <ftp://ftp.infradead.org/pub/pcsp/>.
CONFIG_MAGIC_SYSRQ CONFIG_MAGIC_SYSRQ
If you say Y here, you will have some control over the system even If you say Y here, you will have some control over the system even
if the system crashes for example during kernel debugging (e.g., you if the system crashes for example during kernel debugging (e.g., you
......
...@@ -623,34 +623,6 @@ CONFIG_RTC ...@@ -623,34 +623,6 @@ CONFIG_RTC
The module is called rtc.o. If you want to compile it as a module, The module is called rtc.o. If you want to compile it as a module,
say M here and read <file:Documentation/modules.txt>. say M here and read <file:Documentation/modules.txt>.
CONFIG_SOUND
If you have a sound card in your computer, i.e. if it can say more
than an occasional beep, say Y. Be sure to have all the information
about your sound card and its configuration down (I/O port,
interrupt and DMA channel), because you will be asked for it.
You want to read the Sound-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>. General information about
the modular sound system is contained in the files
<file:Documentation/sound/Introduction>. The file
<file:Documentation/sound/README.OSS> contains some slightly
outdated but still useful information as well.
If you have a PnP sound card and you want to configure it at boot
time using the ISA PnP tools (read
<http://www.roestock.demon.co.uk/isapnptools/>), then you need to
compile the sound card support as a module ( = code which can be
inserted in and removed from the running kernel whenever you want)
and load that module after the PnP configuration is finished. To do
this, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/sound/README.modules>; the module will be
called soundcore.o.
I'm told that even without a sound card, you can make your computer
say more than an occasional beep, by programming the PC speaker.
Kernel patches and supporting utilities to do that are in the pcsp
package, available at <ftp://ftp.infradead.org/pub/pcsp/>.
CONFIG_MAGIC_SYSRQ CONFIG_MAGIC_SYSRQ
If you say Y here, you will have some control over the system even If you say Y here, you will have some control over the system even
if the system crashes for example during kernel debugging (e.g., you if the system crashes for example during kernel debugging (e.g., you
......
...@@ -1143,34 +1143,6 @@ CONFIG_RTC ...@@ -1143,34 +1143,6 @@ CONFIG_RTC
The module is called rtc.o. If you want to compile it as a module, The module is called rtc.o. If you want to compile it as a module,
say M here and read <file:Documentation/modules.txt>. say M here and read <file:Documentation/modules.txt>.
CONFIG_SOUND
If you have a sound card in your computer, i.e. if it can say more
than an occasional beep, say Y. Be sure to have all the information
about your sound card and its configuration down (I/O port,
interrupt and DMA channel), because you will be asked for it.
You want to read the Sound-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>. General information about
the modular sound system is contained in the files
<file:Documentation/sound/Introduction>. The file
<file:Documentation/sound/README.OSS> contains some slightly
outdated but still useful information as well.
If you have a PnP sound card and you want to configure it at boot
time using the ISA PnP tools (read
<http://www.roestock.demon.co.uk/isapnptools/>), then you need to
compile the sound card support as a module ( = code which can be
inserted in and removed from the running kernel whenever you want)
and load that module after the PnP configuration is finished. To do
this, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/sound/README.modules>; the module will be
called soundcore.o.
I'm told that even without a sound card, you can make your computer
say more than an occasional beep, by programming the PC speaker.
Kernel patches and supporting utilities to do that are in the pcsp
package, available at <ftp://ftp.infradead.org/pub/pcsp/>.
CONFIG_MAGIC_SYSRQ CONFIG_MAGIC_SYSRQ
If you say Y here, you will have some control over the system even If you say Y here, you will have some control over the system even
if the system crashes for example during kernel debugging (e.g., you if the system crashes for example during kernel debugging (e.g., you
......
CONFIG_SOUND
If you have a sound card in your computer, i.e. if it can say more
than an occasional beep, say Y. Be sure to have all the information
about your sound card and its configuration down (I/O port,
interrupt and DMA channel), because you will be asked for it.
You want to read the Sound-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>. General information about
the modular sound system is contained in the files
<file:Documentation/sound/Introduction>. The file
<file:Documentation/sound/README.OSS> contains some slightly
outdated but still useful information as well.
If you have a PnP sound card and you want to configure it at boot
time using the ISA PnP tools (read
<http://www.roestock.demon.co.uk/isapnptools/>), then you need to
compile the sound card support as a module ( = code which can be
inserted in and removed from the running kernel whenever you want)
and load that module after the PnP configuration is finished. To do
this, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/sound/README.modules>; the module will be
called soundcore.o.
I'm told that even without a sound card, you can make your computer
say more than an occasional beep, by programming the PC speaker.
Kernel patches and supporting utilities to do that are in the pcsp
package, available at <ftp://ftp.infradead.org/pub/pcsp/>.
CONFIG_INPUT_GAMEPORT CONFIG_INPUT_GAMEPORT
Gameport support is for the standard 15-pin PC gameport. If you Gameport support is for the standard 15-pin PC gameport. If you
have a joystick, gamepad, gameport card, a soundcard with a gameport have a joystick, gamepad, gameport card, a soundcard with a gameport
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment