Commit bfa55bd4 authored by Dave Airlie's avatar Dave Airlie

Merge branch 'drm-sti-next-add-dvo' of...

Merge branch 'drm-sti-next-add-dvo' of git://git.linaro.org/people/benjamin.gaignard/kernel into drm-next

This patch enable the last big hardware feature of my driver: the
connector for panel.
Like for HMDI and HDA, Digital Video Out (DVO) create brige, encoder
and connector
drm objects.

* 'drm-sti-next-add-dvo' of git://git.linaro.org/people/benjamin.gaignard/kernel:
  drm: sti: add DVO output connector
parents c0d2792b f32c4c50
...@@ -83,6 +83,22 @@ sti-hda: ...@@ -83,6 +83,22 @@ sti-hda:
- clock-names: names of the clocks listed in clocks property in the same - clock-names: names of the clocks listed in clocks property in the same
order. order.
sti-dvo:
Required properties:
must be a child of sti-tvout
- compatible: "st,stih<chip>-dvo"
- reg: Physical base address of the IP registers and length of memory mapped region.
- reg-names: names of the mapped memory regions listed in regs property in
the same order.
- clocks: from common clock binding: handle hardware IP needed clocks, the
number of clocks may depend of the SoC type.
See ../clocks/clock-bindings.txt for details.
- clock-names: names of the clocks listed in clocks property in the same
order.
- pinctrl-0: pin control handle
- pinctrl-name: names of the pin control to use
- sti,panel: phandle of the panel connected to the DVO output
sti-hqvdp: sti-hqvdp:
must be a child of sti-display-subsystem must be a child of sti-display-subsystem
Required properties: Required properties:
...@@ -198,6 +214,19 @@ Example: ...@@ -198,6 +214,19 @@ Example:
clock-names = "pix", "hddac"; clock-names = "pix", "hddac";
clocks = <&clockgen_c_vcc CLK_S_PIX_HD>, <&clockgen_c_vcc CLK_S_HDDAC>; clocks = <&clockgen_c_vcc CLK_S_PIX_HD>, <&clockgen_c_vcc CLK_S_HDDAC>;
}; };
sti-dvo@8d00400 {
compatible = "st,stih407-dvo";
reg = <0x8d00400 0x200>;
reg-names = "dvo-reg";
clock-names = "dvo_pix", "dvo",
"main_parent", "aux_parent";
clocks = <&clk_s_d2_flexgen CLK_PIX_DVO>, <&clk_s_d2_flexgen CLK_DVO>,
<&clk_s_d2_quadfs 0>, <&clk_s_d2_quadfs 1>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dvo>;
sti,panel = <&panel_dvo>;
};
}; };
sti-hqvdp@9c000000 { sti-hqvdp@9c000000 {
......
...@@ -12,6 +12,9 @@ stihdmi-y := sti_hdmi.o \ ...@@ -12,6 +12,9 @@ stihdmi-y := sti_hdmi.o \
sti_hdmi_tx3g0c55phy.o \ sti_hdmi_tx3g0c55phy.o \
sti_hdmi_tx3g4c28phy.o \ sti_hdmi_tx3g4c28phy.o \
stidvo-y := sti_dvo.o \
sti_awg_utils.o
obj-$(CONFIG_DRM_STI) = \ obj-$(CONFIG_DRM_STI) = \
sti_vtg.o \ sti_vtg.o \
sti_vtac.o \ sti_vtac.o \
...@@ -20,4 +23,5 @@ obj-$(CONFIG_DRM_STI) = \ ...@@ -20,4 +23,5 @@ obj-$(CONFIG_DRM_STI) = \
sti_tvout.o \ sti_tvout.o \
sticompositor.o \ sticompositor.o \
sti_hqvdp.o \ sti_hqvdp.o \
stidvo.o \
sti_drm_drv.o sti_drm_drv.o
/*
* Copyright (C) STMicroelectronics SA 2014
* Author: Vincent Abriou <vincent.abriou@st.com> for STMicroelectronics.
* License terms: GNU General Public License (GPL), version 2
*/
#include "sti_awg_utils.h"
#define AWG_OPCODE_OFFSET 10
enum opcode {
SET,
RPTSET,
RPLSET,
SKIP,
STOP,
REPEAT,
REPLAY,
JUMP,
HOLD,
};
static int awg_generate_instr(enum opcode opcode,
long int arg,
long int mux_sel,
long int data_en,
struct awg_code_generation_params *fwparams)
{
u32 instruction = 0;
u32 mux = (mux_sel << 8) & 0x1ff;
u32 data_enable = (data_en << 9) & 0x2ff;
long int arg_tmp = arg;
/* skip, repeat and replay arg should not exceed 1023.
* If user wants to exceed this value, the instruction should be
* duplicate and arg should be adjust for each duplicated instruction.
*/
while (arg_tmp > 0) {
arg = arg_tmp;
if (fwparams->instruction_offset >= AWG_MAX_INST) {
DRM_ERROR("too many number of instructions\n");
return -EINVAL;
}
switch (opcode) {
case SKIP:
/* leave 'arg' + 1 pixel elapsing without changing
* output bus */
arg--; /* pixel adjustment */
arg_tmp--;
if (arg < 0) {
/* SKIP instruction not needed */
return 0;
}
if (arg == 0) {
/* SKIP 0 not permitted but we want to skip 1
* pixel. So we transform SKIP into SET
* instruction */
opcode = SET;
arg = (arg << 24) >> 24;
arg &= (0x0ff);
break;
}
mux = 0;
data_enable = 0;
arg = (arg << 22) >> 22;
arg &= (0x3ff);
break;
case REPEAT:
case REPLAY:
if (arg == 0) {
/* REPEAT or REPLAY instruction not needed */
return 0;
}
mux = 0;
data_enable = 0;
arg = (arg << 22) >> 22;
arg &= (0x3ff);
break;
case JUMP:
mux = 0;
data_enable = 0;
arg |= 0x40; /* for jump instruction 7th bit is 1 */
arg = (arg << 22) >> 22;
arg &= 0x3ff;
break;
case STOP:
arg = 0;
break;
case SET:
case RPTSET:
case RPLSET:
case HOLD:
arg = (arg << 24) >> 24;
arg &= (0x0ff);
break;
default:
DRM_ERROR("instruction %d does not exist\n", opcode);
return -EINVAL;
}
arg_tmp = arg_tmp - arg;
arg = ((arg + mux) + data_enable);
instruction = ((opcode) << AWG_OPCODE_OFFSET) | arg;
fwparams->ram_code[fwparams->instruction_offset] =
instruction & (0x3fff);
fwparams->instruction_offset++;
}
return 0;
}
int sti_awg_generate_code_data_enable_mode(
struct awg_code_generation_params *fwparams,
struct awg_timing *timing)
{
long int val;
long int data_en;
int ret = 0;
if (timing->trailing_lines > 0) {
/* skip trailing lines */
val = timing->blanking_level;
data_en = 0;
ret |= awg_generate_instr(RPLSET, val, 0, data_en, fwparams);
val = timing->trailing_lines - 1;
data_en = 0;
ret |= awg_generate_instr(REPLAY, val, 0, data_en, fwparams);
}
if (timing->trailing_pixels > 0) {
/* skip trailing pixel */
val = timing->blanking_level;
data_en = 0;
ret |= awg_generate_instr(RPLSET, val, 0, data_en, fwparams);
val = timing->trailing_pixels - 1;
data_en = 0;
ret |= awg_generate_instr(SKIP, val, 0, data_en, fwparams);
}
/* set DE signal high */
val = timing->blanking_level;
data_en = 1;
ret |= awg_generate_instr((timing->trailing_pixels > 0) ? SET : RPLSET,
val, 0, data_en, fwparams);
if (timing->blanking_pixels > 0) {
/* skip the number of active pixel */
val = timing->active_pixels - 1;
data_en = 1;
ret |= awg_generate_instr(SKIP, val, 0, data_en, fwparams);
/* set DE signal low */
val = timing->blanking_level;
data_en = 0;
ret |= awg_generate_instr(SET, val, 0, data_en, fwparams);
}
/* replay the sequence as many active lines defined */
val = timing->active_lines - 1;
data_en = 0;
ret |= awg_generate_instr(REPLAY, val, 0, data_en, fwparams);
if (timing->blanking_lines > 0) {
/* skip blanking lines */
val = timing->blanking_level;
data_en = 0;
ret |= awg_generate_instr(RPLSET, val, 0, data_en, fwparams);
val = timing->blanking_lines - 1;
data_en = 0;
ret |= awg_generate_instr(REPLAY, val, 0, data_en, fwparams);
}
return ret;
}
/*
* Copyright (C) STMicroelectronics SA 2014
* Author: Vincent Abriou <vincent.abriou@st.com> for STMicroelectronics.
* License terms: GNU General Public License (GPL), version 2
*/
#ifndef _STI_AWG_UTILS_H_
#define _STI_AWG_UTILS_H_
#include <drm/drmP.h>
#define AWG_MAX_INST 64
struct awg_code_generation_params {
u32 *ram_code;
u8 instruction_offset;
};
struct awg_timing {
u32 total_lines;
u32 active_lines;
u32 blanking_lines;
u32 trailing_lines;
u32 total_pixels;
u32 active_pixels;
u32 blanking_pixels;
u32 trailing_pixels;
u32 blanking_level;
};
int sti_awg_generate_code_data_enable_mode(
struct awg_code_generation_params *fw_gen_params,
struct awg_timing *timing);
#endif
This diff is collapsed.
...@@ -48,6 +48,9 @@ ...@@ -48,6 +48,9 @@
#define TVO_HDMI_CLIP_VALUE_R_CR 0x514 #define TVO_HDMI_CLIP_VALUE_R_CR 0x514
#define TVO_HDMI_SYNC_SEL 0x518 #define TVO_HDMI_SYNC_SEL 0x518
#define TVO_HDMI_DFV_OBS 0x540 #define TVO_HDMI_DFV_OBS 0x540
#define TVO_VIP_DVO 0x600
#define TVO_DVO_SYNC_SEL 0x618
#define TVO_DVO_CONFIG 0x620
#define TVO_IN_FMT_SIGNED BIT(0) #define TVO_IN_FMT_SIGNED BIT(0)
#define TVO_SYNC_EXT BIT(4) #define TVO_SYNC_EXT BIT(4)
...@@ -98,6 +101,9 @@ ...@@ -98,6 +101,9 @@
#define TVO_SYNC_HD_DCS_SHIFT 8 #define TVO_SYNC_HD_DCS_SHIFT 8
#define TVO_SYNC_DVO_PAD_HSYNC_SHIFT 8
#define TVO_SYNC_DVO_PAD_VSYNC_SHIFT 16
#define ENCODER_CRTC_MASK (BIT(0) | BIT(1)) #define ENCODER_CRTC_MASK (BIT(0) | BIT(1))
/* enum listing the supported output data format */ /* enum listing the supported output data format */
...@@ -113,6 +119,7 @@ struct sti_tvout { ...@@ -113,6 +119,7 @@ struct sti_tvout {
struct reset_control *reset; struct reset_control *reset;
struct drm_encoder *hdmi; struct drm_encoder *hdmi;
struct drm_encoder *hda; struct drm_encoder *hda;
struct drm_encoder *dvo;
}; };
struct sti_tvout_encoder { struct sti_tvout_encoder {
...@@ -261,6 +268,66 @@ static void tvout_vip_set_in_vid_fmt(struct sti_tvout *tvout, ...@@ -261,6 +268,66 @@ static void tvout_vip_set_in_vid_fmt(struct sti_tvout *tvout,
tvout_write(tvout, val, reg); tvout_write(tvout, val, reg);
} }
/**
* Start VIP block for DVO output
*
* @tvout: pointer on tvout structure
* @main_path: true if main path has to be used in the vip configuration
* else aux path is used.
*/
static void tvout_dvo_start(struct sti_tvout *tvout, bool main_path)
{
struct device_node *node = tvout->dev->of_node;
bool sel_input_logic_inverted = false;
u32 tvo_in_vid_format;
int val;
dev_dbg(tvout->dev, "%s\n", __func__);
if (main_path) {
DRM_DEBUG_DRIVER("main vip for DVO\n");
/* Select the input sync for dvo = VTG set 4 */
val = TVO_SYNC_MAIN_VTG_SET_4 << TVO_SYNC_DVO_PAD_VSYNC_SHIFT;
val |= TVO_SYNC_MAIN_VTG_SET_4 << TVO_SYNC_DVO_PAD_HSYNC_SHIFT;
val |= TVO_SYNC_MAIN_VTG_SET_4;
tvout_write(tvout, val, TVO_DVO_SYNC_SEL);
tvo_in_vid_format = TVO_MAIN_IN_VID_FORMAT;
} else {
DRM_DEBUG_DRIVER("aux vip for DVO\n");
/* Select the input sync for dvo = VTG set 4 */
val = TVO_SYNC_AUX_VTG_SET_4 << TVO_SYNC_DVO_PAD_VSYNC_SHIFT;
val |= TVO_SYNC_AUX_VTG_SET_4 << TVO_SYNC_DVO_PAD_HSYNC_SHIFT;
val |= TVO_SYNC_AUX_VTG_SET_4;
tvout_write(tvout, val, TVO_DVO_SYNC_SEL);
tvo_in_vid_format = TVO_AUX_IN_VID_FORMAT;
}
/* Set color channel order */
tvout_vip_set_color_order(tvout, TVO_VIP_DVO,
TVO_VIP_REORDER_CR_R_SEL,
TVO_VIP_REORDER_Y_G_SEL,
TVO_VIP_REORDER_CB_B_SEL);
/* Set clipping mode (Limited range RGB/Y) */
tvout_vip_set_clip_mode(tvout, TVO_VIP_DVO,
TVO_VIP_CLIP_LIMITED_RANGE_RGB_Y);
/* Set round mode (rounded to 8-bit per component) */
tvout_vip_set_rnd(tvout, TVO_VIP_DVO, TVO_VIP_RND_8BIT_ROUNDED);
if (of_device_is_compatible(node, "st,stih407-tvout")) {
/* Set input video format */
tvout_vip_set_in_vid_fmt(tvout, tvo_in_vid_format,
TVO_IN_FMT_SIGNED);
sel_input_logic_inverted = true;
}
/* Input selection */
tvout_vip_set_sel_input(tvout, TVO_VIP_DVO, main_path,
sel_input_logic_inverted,
STI_TVOUT_VIDEO_OUT_RGB);
}
/** /**
* Start VIP block for HDMI output * Start VIP block for HDMI output
* *
...@@ -402,6 +469,56 @@ static const struct drm_encoder_funcs sti_tvout_encoder_funcs = { ...@@ -402,6 +469,56 @@ static const struct drm_encoder_funcs sti_tvout_encoder_funcs = {
.destroy = sti_tvout_encoder_destroy, .destroy = sti_tvout_encoder_destroy,
}; };
static void sti_dvo_encoder_commit(struct drm_encoder *encoder)
{
struct sti_tvout *tvout = to_sti_tvout(encoder);
tvout_dvo_start(tvout, sti_drm_crtc_is_main(encoder->crtc));
}
static void sti_dvo_encoder_disable(struct drm_encoder *encoder)
{
struct sti_tvout *tvout = to_sti_tvout(encoder);
/* Reset VIP register */
tvout_write(tvout, 0x0, TVO_VIP_DVO);
}
static const struct drm_encoder_helper_funcs sti_dvo_encoder_helper_funcs = {
.dpms = sti_tvout_encoder_dpms,
.mode_fixup = sti_tvout_encoder_mode_fixup,
.mode_set = sti_tvout_encoder_mode_set,
.prepare = sti_tvout_encoder_prepare,
.commit = sti_dvo_encoder_commit,
.disable = sti_dvo_encoder_disable,
};
static struct drm_encoder *
sti_tvout_create_dvo_encoder(struct drm_device *dev,
struct sti_tvout *tvout)
{
struct sti_tvout_encoder *encoder;
struct drm_encoder *drm_encoder;
encoder = devm_kzalloc(tvout->dev, sizeof(*encoder), GFP_KERNEL);
if (!encoder)
return NULL;
encoder->tvout = tvout;
drm_encoder = (struct drm_encoder *)encoder;
drm_encoder->possible_crtcs = ENCODER_CRTC_MASK;
drm_encoder->possible_clones = 1 << 0;
drm_encoder_init(dev, drm_encoder,
&sti_tvout_encoder_funcs, DRM_MODE_ENCODER_LVDS);
drm_encoder_helper_add(drm_encoder, &sti_dvo_encoder_helper_funcs);
return drm_encoder;
}
static void sti_hda_encoder_commit(struct drm_encoder *encoder) static void sti_hda_encoder_commit(struct drm_encoder *encoder)
{ {
struct sti_tvout *tvout = to_sti_tvout(encoder); struct sti_tvout *tvout = to_sti_tvout(encoder);
...@@ -508,6 +625,7 @@ static void sti_tvout_create_encoders(struct drm_device *dev, ...@@ -508,6 +625,7 @@ static void sti_tvout_create_encoders(struct drm_device *dev,
{ {
tvout->hdmi = sti_tvout_create_hdmi_encoder(dev, tvout); tvout->hdmi = sti_tvout_create_hdmi_encoder(dev, tvout);
tvout->hda = sti_tvout_create_hda_encoder(dev, tvout); tvout->hda = sti_tvout_create_hda_encoder(dev, tvout);
tvout->dvo = sti_tvout_create_dvo_encoder(dev, tvout);
} }
static void sti_tvout_destroy_encoders(struct sti_tvout *tvout) static void sti_tvout_destroy_encoders(struct sti_tvout *tvout)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment