[media] rc-core: add separate defines for protocol bitmaps and numbers

The RC_TYPE_* defines are currently used both where a single protocol is
expected and where a bitmap of protocols is expected.

Functions like rc_keydown() and functions which add/remove entries to the
keytable want a single protocol. Future userspace APIs would also
benefit from numeric protocols (rather than bitmap ones). Keytables are
smaller if they can use a small(ish) integer rather than a bitmap.

Other functions or struct members (e.g. allowed_protos,
enabled_protocols, etc) accept multiple protocols and need a bitmap.

Using different types reduces the risk of programmer error. Using a
protocol enum whereever possible also makes for a more future-proof
user-space API as we don't need to worry about a sufficient number of
bits being available (e.g. in structs used for ioctl() calls).

The use of both a number and a corresponding bit is dalso one in e.g.
the input subsystem as well (see all the references to set/clear bit when
changing keytables for example).

This patch separate the different usages in preparation for
upcoming patches.

Where a single protocol is expected, enum rc_type is used; where one or more
protocol(s) are expected, something like u64 is used.

The patch has been rewritten so that the format of the sysfs "protocols"
file is no longer altered (at the loss of some detail). The file itself
should probably be deprecated in the future though.
Signed-off-by: David Härdeman <david@hardeman.nu>
Cc: Andy Walls <awalls@md.metrocast.net>
Cc: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Antti Palosaari <crope@iki.fi>
Cc: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/common/siano/smsir.c

@@ -88,7 +88,7 @@ int sms_ir_init(struct smscore_device_t *coredev)
 
 	dev->priv = coredev;
 	dev->driver_type = RC_DRIVER_IR_RAW;
-	dev->allowed_protos = RC_TYPE_ALL;
+	dev->allowed_protos = RC_BIT_ALL;
 	dev->map_name = sms_get_board(board_id)->rc_codes;
 	dev->driver_name = MODULE_NAME;
 

drivers/media/i2c/ir-kbd-i2c.c

@@ -284,7 +284,7 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
 {
 	char *ir_codes = NULL;
 	const char *name = NULL;
-	u64 rc_type = RC_TYPE_UNKNOWN;
+	u64 rc_type = RC_BIT_UNKNOWN;
 	struct IR_i2c *ir;
 	struct rc_dev *rc = NULL;
 	struct i2c_adapter *adap = client->adapter;
@@ -303,7 +303,7 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	case 0x64:
 		name        = "Pixelview";
 		ir->get_key = get_key_pixelview;
-		rc_type     = RC_TYPE_OTHER;
+		rc_type     = RC_BIT_OTHER;
 		ir_codes    = RC_MAP_EMPTY;
 		break;
 	case 0x18:
@@ -311,31 +311,31 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	case 0x1a:
 		name        = "Hauppauge";
 		ir->get_key = get_key_haup;
-		rc_type     = RC_TYPE_RC5;
+		rc_type     = RC_BIT_RC5;
 		ir_codes    = RC_MAP_HAUPPAUGE;
 		break;
 	case 0x30:
 		name        = "KNC One";
 		ir->get_key = get_key_knc1;
-		rc_type     = RC_TYPE_OTHER;
+		rc_type     = RC_BIT_OTHER;
 		ir_codes    = RC_MAP_EMPTY;
 		break;
 	case 0x6b:
 		name        = "FusionHDTV";
 		ir->get_key = get_key_fusionhdtv;
-		rc_type     = RC_TYPE_RC5;
+		rc_type     = RC_BIT_RC5;
 		ir_codes    = RC_MAP_FUSIONHDTV_MCE;
 		break;
 	case 0x40:
 		name        = "AVerMedia Cardbus remote";
 		ir->get_key = get_key_avermedia_cardbus;
-		rc_type     = RC_TYPE_OTHER;
+		rc_type     = RC_BIT_OTHER;
 		ir_codes    = RC_MAP_AVERMEDIA_CARDBUS;
 		break;
 	case 0x71:
 		name        = "Hauppauge/Zilog Z8";
 		ir->get_key = get_key_haup_xvr;
-		rc_type     = RC_TYPE_RC5;
+		rc_type     = RC_BIT_RC5;
 		ir_codes    = RC_MAP_HAUPPAUGE;
 		break;
 	}

drivers/media/pci/cx18/cx18-i2c.c

@@ -98,7 +98,7 @@ static int cx18_i2c_new_ir(struct cx18 *cx, struct i2c_adapter *adap, u32 hw,
 	case CX18_HW_Z8F0811_IR_RX_HAUP:
 		init_data->ir_codes = RC_MAP_HAUPPAUGE;
 		init_data->internal_get_key_func = IR_KBD_GET_KEY_HAUP_XVR;
-		init_data->type = RC_TYPE_RC5;
+		init_data->type = RC_BIT_RC5;
 		init_data->name = cx->card_name;
 		info.platform_data = init_data;
 		break;

drivers/media/pci/cx23885/cx23885-input.c

@@ -270,21 +270,21 @@ int cx23885_input_init(struct cx23885_dev *dev)
 	case CX23885_BOARD_HAUPPAUGE_HVR1250:
 		/* Integrated CX2388[58] IR controller */
 		driver_type = RC_DRIVER_IR_RAW;
-		allowed_protos = RC_TYPE_ALL;
+		allowed_protos = RC_BIT_ALL;
 		/* The grey Hauppauge RC-5 remote */
 		rc_map = RC_MAP_HAUPPAUGE;
 		break;
 	case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL:
 		/* Integrated CX23885 IR controller */
 		driver_type = RC_DRIVER_IR_RAW;
-		allowed_protos = RC_TYPE_NEC;
+		allowed_protos = RC_BIT_NEC;
 		/* The grey Terratec remote with orange buttons */
 		rc_map = RC_MAP_NEC_TERRATEC_CINERGY_XS;
 		break;
 	case CX23885_BOARD_TEVII_S470:
 		/* Integrated CX23885 IR controller */
 		driver_type = RC_DRIVER_IR_RAW;
-		allowed_protos = RC_TYPE_ALL;
+		allowed_protos = RC_BIT_ALL;
 		/* A guess at the remote */
 		rc_map = RC_MAP_TEVII_NEC;
 		break;

drivers/media/pci/cx88/cx88-input.c

@@ -248,7 +248,7 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
 	struct cx88_IR *ir;
 	struct rc_dev *dev;
 	char *ir_codes = NULL;
-	u64 rc_type = RC_TYPE_OTHER;
+	u64 rc_type = RC_BIT_OTHER;
 	int err = -ENOMEM;
 	u32 hardware_mask = 0;	/* For devices with a hardware mask, when
 				 * used with a full-code IR table
@@ -416,7 +416,7 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
 		break;
 	case CX88_BOARD_TWINHAN_VP1027_DVBS:
 		ir_codes         = RC_MAP_TWINHAN_VP1027_DVBS;
-		rc_type          = RC_TYPE_NEC;
+		rc_type          = RC_BIT_NEC;
 		ir->sampling     = 0xff00; /* address */
 		break;
 	}
@@ -592,7 +592,7 @@ void cx88_i2c_init_ir(struct cx88_core *core)
 	case CX88_BOARD_LEADTEK_PVR2000:
 		addr_list = pvr2000_addr_list;
 		core->init_data.name = "cx88 Leadtek PVR 2000 remote";
-		core->init_data.type = RC_TYPE_UNKNOWN;
+		core->init_data.type = RC_BIT_UNKNOWN;
 		core->init_data.get_key = get_key_pvr2000;
 		core->init_data.ir_codes = RC_MAP_EMPTY;
 		break;
@@ -613,7 +613,7 @@ void cx88_i2c_init_ir(struct cx88_core *core)
 			/* Hauppauge XVR */
 			core->init_data.name = "cx88 Hauppauge XVR remote";
 			core->init_data.ir_codes = RC_MAP_HAUPPAUGE;
-			core->init_data.type = RC_TYPE_RC5;
+			core->init_data.type = RC_BIT_RC5;
 			core->init_data.internal_get_key_func = IR_KBD_GET_KEY_HAUP_XVR;
 
 			info.platform_data = &core->init_data;

drivers/media/pci/ivtv/ivtv-i2c.c

@@ -200,21 +200,21 @@ static int ivtv_i2c_new_ir(struct ivtv *itv, u32 hw, const char *type, u8 addr)
 		init_data->ir_codes = RC_MAP_AVERMEDIA_CARDBUS;
 		init_data->internal_get_key_func =
 					IR_KBD_GET_KEY_AVERMEDIA_CARDBUS;
-		init_data->type = RC_TYPE_OTHER;
+		init_data->type = RC_BIT_OTHER;
 		init_data->name = "AVerMedia AVerTV card";
 		break;
 	case IVTV_HW_I2C_IR_RX_HAUP_EXT:
 	case IVTV_HW_I2C_IR_RX_HAUP_INT:
 		init_data->ir_codes = RC_MAP_HAUPPAUGE;
 		init_data->internal_get_key_func = IR_KBD_GET_KEY_HAUP;
-		init_data->type = RC_TYPE_RC5;
+		init_data->type = RC_BIT_RC5;
 		init_data->name = itv->card_name;
 		break;
 	case IVTV_HW_Z8F0811_IR_RX_HAUP:
 		/* Default to grey remote */
 		init_data->ir_codes = RC_MAP_HAUPPAUGE;
 		init_data->internal_get_key_func = IR_KBD_GET_KEY_HAUP_XVR;
-		init_data->type = RC_TYPE_RC5;
+		init_data->type = RC_BIT_RC5;
 		init_data->name = itv->card_name;
 		break;
 	case IVTV_HW_I2C_IR_RX_ADAPTEC:
@@ -222,7 +222,7 @@ static int ivtv_i2c_new_ir(struct ivtv *itv, u32 hw, const char *type, u8 addr)
 		init_data->name = itv->card_name;
 		/* FIXME: The protocol and RC_MAP needs to be corrected */
 		init_data->ir_codes = RC_MAP_EMPTY;
-		init_data->type = RC_TYPE_UNKNOWN;
+		init_data->type = RC_BIT_UNKNOWN;
 		break;
 	}
 

drivers/media/pci/saa7134/saa7134-input.c

@@ -990,7 +990,7 @@ void saa7134_probe_i2c_ir(struct saa7134_dev *dev)
 		dev->init_data.name = "BeholdTV";
 		dev->init_data.get_key = get_key_beholdm6xx;
 		dev->init_data.ir_codes = RC_MAP_BEHOLD;
-		dev->init_data.type = RC_TYPE_NEC;
+		dev->init_data.type = RC_BIT_NEC;
 		info.addr = 0x2d;
 		break;
 	case SAA7134_BOARD_AVERMEDIA_CARDBUS_501:

drivers/media/rc/ati_remote.c

@@ -784,7 +784,7 @@ static void ati_remote_rc_init(struct ati_remote *ati_remote)
 
 	rdev->priv = ati_remote;
 	rdev->driver_type = RC_DRIVER_SCANCODE;
-	rdev->allowed_protos = RC_TYPE_OTHER;
+	rdev->allowed_protos = RC_BIT_OTHER;
 	rdev->driver_name = "ati_remote";
 
 	rdev->open = ati_remote_rc_open;

drivers/media/rc/ene_ir.c

@@ -1046,7 +1046,7 @@ static int ene_probe(struct pnp_dev *pnp_dev, const struct pnp_device_id *id)
 		learning_mode_force = false;
 
 	rdev->driver_type = RC_DRIVER_IR_RAW;
-	rdev->allowed_protos = RC_TYPE_ALL;
+	rdev->allowed_protos = RC_BIT_ALL;
 	rdev->priv = dev;
 	rdev->open = ene_open;
 	rdev->close = ene_close;

drivers/media/rc/fintek-cir.c

@@ -541,7 +541,7 @@ static int fintek_probe(struct pnp_dev *pdev, const struct pnp_device_id *dev_id
 	/* Set up the rc device */
 	rdev->priv = fintek;
 	rdev->driver_type = RC_DRIVER_IR_RAW;
-	rdev->allowed_protos = RC_TYPE_ALL;
+	rdev->allowed_protos = RC_BIT_ALL;
 	rdev->open = fintek_open;
 	rdev->close = fintek_close;
 	rdev->input_name = FINTEK_DESCRIPTION;

drivers/media/rc/gpio-ir-recv.c

@@ -95,7 +95,7 @@ static int __devinit gpio_ir_recv_probe(struct platform_device *pdev)
 	if (pdata->allowed_protos)
 		rcdev->allowed_protos = pdata->allowed_protos;
 	else
-		rcdev->allowed_protos = RC_TYPE_ALL;
+		rcdev->allowed_protos = RC_BIT_ALL;
 	rcdev->map_name = pdata->map_name ?: RC_MAP_EMPTY;
 
 	gpio_dev->rcdev = rcdev;

drivers/media/rc/iguanair.c

@@ -499,7 +499,7 @@ static int __devinit iguanair_probe(struct usb_interface *intf,
 	usb_to_input_id(ir->udev, &rc->input_id);
 	rc->dev.parent = &intf->dev;
 	rc->driver_type = RC_DRIVER_IR_RAW;
-	rc->allowed_protos = RC_TYPE_ALL;
+	rc->allowed_protos = RC_BIT_ALL;
 	rc->priv = ir;
 	rc->open = iguanair_open;
 	rc->close = iguanair_close;

drivers/media/rc/imon.c

@@ -1001,7 +1001,7 @@ static void imon_touch_display_timeout(unsigned long data)
  * it is not, so we must acquire it prior to calling send_packet, which
  * requires that the lock is held.
  */
-static int imon_ir_change_protocol(struct rc_dev *rc, u64 rc_type)
+static int imon_ir_change_protocol(struct rc_dev *rc, u64 *rc_type)
 {
 	int retval;
 	struct imon_context *ictx = rc->priv;
@@ -1010,31 +1010,27 @@ static int imon_ir_change_protocol(struct rc_dev *rc, u64 rc_type)
 	unsigned char ir_proto_packet[] = {
 		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x86 };
 
-	if (rc_type && !(rc_type & rc->allowed_protos))
+	if (*rc_type && !(*rc_type & rc->allowed_protos))
 		dev_warn(dev, "Looks like you're trying to use an IR protocol "
 			 "this device does not support\n");
 
-	switch (rc_type) {
-	case RC_TYPE_RC6:
+	if (*rc_type & RC_BIT_RC6_MCE) {
 		dev_dbg(dev, "Configuring IR receiver for MCE protocol\n");
 		ir_proto_packet[0] = 0x01;
-		break;
-	case RC_TYPE_UNKNOWN:
-	case RC_TYPE_OTHER:
+		*rc_type = RC_BIT_RC6_MCE;
+	} else if (*rc_type & RC_BIT_OTHER) {
 		dev_dbg(dev, "Configuring IR receiver for iMON protocol\n");
 		if (!pad_stabilize)
 			dev_dbg(dev, "PAD stabilize functionality disabled\n");
 		/* ir_proto_packet[0] = 0x00; // already the default */
-		rc_type = RC_TYPE_OTHER;
-		break;
-	default:
+		*rc_type = RC_BIT_OTHER;
+	} else {
 		dev_warn(dev, "Unsupported IR protocol specified, overriding "
 			 "to iMON IR protocol\n");
 		if (!pad_stabilize)
 			dev_dbg(dev, "PAD stabilize functionality disabled\n");
 		/* ir_proto_packet[0] = 0x00; // already the default */
-		rc_type = RC_TYPE_OTHER;
-		break;
+		*rc_type = RC_BIT_OTHER;
 	}
 
 	memcpy(ictx->usb_tx_buf, &ir_proto_packet, sizeof(ir_proto_packet));
@@ -1048,7 +1044,7 @@ static int imon_ir_change_protocol(struct rc_dev *rc, u64 rc_type)
 	if (retval)
 		goto out;
 
-	ictx->rc_type = rc_type;
+	ictx->rc_type = *rc_type;
 	ictx->pad_mouse = false;
 
 out:
@@ -1323,7 +1319,7 @@ static void imon_pad_to_keys(struct imon_context *ictx, unsigned char *buf)
 		rel_x = buf[2];
 		rel_y = buf[3];
 
-		if (ictx->rc_type == RC_TYPE_OTHER && pad_stabilize) {
+		if (ictx->rc_type == RC_BIT_OTHER && pad_stabilize) {
 			if ((buf[1] == 0) && ((rel_x != 0) || (rel_y != 0))) {
 				dir = stabilize((int)rel_x, (int)rel_y,
 						timeout, threshold);
@@ -1390,7 +1386,7 @@ static void imon_pad_to_keys(struct imon_context *ictx, unsigned char *buf)
 		buf[0] = 0x01;
 		buf[1] = buf[4] = buf[5] = buf[6] = buf[7] = 0;
 
-		if (ictx->rc_type == RC_TYPE_OTHER && pad_stabilize) {
+		if (ictx->rc_type == RC_BIT_OTHER && pad_stabilize) {
 			dir = stabilize((int)rel_x, (int)rel_y,
 					timeout, threshold);
 			if (!dir) {
@@ -1511,7 +1507,7 @@ static void imon_incoming_packet(struct imon_context *ictx,
 		kc = imon_panel_key_lookup(scancode);
 	} else {
 		scancode = be32_to_cpu(*((u32 *)buf));
-		if (ictx->rc_type == RC_TYPE_RC6) {
+		if (ictx->rc_type == RC_BIT_RC6_MCE) {
 			ktype = IMON_KEY_IMON;
 			if (buf[0] == 0x80)
 				ktype = IMON_KEY_MCE;
@@ -1744,7 +1740,7 @@ static void imon_get_ffdc_type(struct imon_context *ictx)
 {
 	u8 ffdc_cfg_byte = ictx->usb_rx_buf[6];
 	u8 detected_display_type = IMON_DISPLAY_TYPE_NONE;
-	u64 allowed_protos = RC_TYPE_OTHER;
+	u64 allowed_protos = RC_BIT_OTHER;
 
 	switch (ffdc_cfg_byte) {
 	/* iMON Knob, no display, iMON IR + vol knob */
@@ -1775,13 +1771,13 @@ static void imon_get_ffdc_type(struct imon_context *ictx)
 	case 0x9e:
 		dev_info(ictx->dev, "0xffdc iMON VFD, MCE IR");
 		detected_display_type = IMON_DISPLAY_TYPE_VFD;
-		allowed_protos = RC_TYPE_RC6;
+		allowed_protos = RC_BIT_RC6_MCE;
 		break;
 	/* iMON LCD, MCE IR */
 	case 0x9f:
 		dev_info(ictx->dev, "0xffdc iMON LCD, MCE IR");
 		detected_display_type = IMON_DISPLAY_TYPE_LCD;
-		allowed_protos = RC_TYPE_RC6;
+		allowed_protos = RC_BIT_RC6_MCE;
 		break;
 	default:
 		dev_info(ictx->dev, "Unknown 0xffdc device, "
@@ -1789,7 +1785,7 @@ static void imon_get_ffdc_type(struct imon_context *ictx)
 		detected_display_type = IMON_DISPLAY_TYPE_VFD;
 		/* We don't know which one it is, allow user to set the
 		 * RC6 one from userspace if OTHER wasn't correct. */
-		allowed_protos |= RC_TYPE_RC6;
+		allowed_protos |= RC_BIT_RC6_MCE;
 		break;
 	}
 
@@ -1875,7 +1871,7 @@ static struct rc_dev *imon_init_rdev(struct imon_context *ictx)
 
 	rdev->priv = ictx;
 	rdev->driver_type = RC_DRIVER_SCANCODE;
-	rdev->allowed_protos = RC_TYPE_OTHER | RC_TYPE_RC6; /* iMON PAD or MCE */
+	rdev->allowed_protos = RC_BIT_OTHER | RC_BIT_RC6_MCE; /* iMON PAD or MCE */
 	rdev->change_protocol = imon_ir_change_protocol;
 	rdev->driver_name = MOD_NAME;
 
@@ -1893,7 +1889,7 @@ static struct rc_dev *imon_init_rdev(struct imon_context *ictx)
 
 	imon_set_display_type(ictx);
 
-	if (ictx->rc_type == RC_TYPE_RC6)
+	if (ictx->rc_type == RC_BIT_RC6_MCE)
 		rdev->map_name = RC_MAP_IMON_MCE;
 	else
 		rdev->map_name = RC_MAP_IMON_PAD;

drivers/media/rc/ir-jvc-decoder.c

@@ -47,7 +47,7 @@ static int ir_jvc_decode(struct rc_dev *dev, struct ir_raw_event ev)
 {
 	struct jvc_dec *data = &dev->raw->jvc;
 
-	if (!(dev->raw->enabled_protocols & RC_TYPE_JVC))
+	if (!(dev->raw->enabled_protocols & RC_BIT_JVC))
 		return 0;
 
 	if (!is_timing_event(ev)) {
@@ -174,7 +174,7 @@ static int ir_jvc_decode(struct rc_dev *dev, struct ir_raw_event ev)
 }
 
 static struct ir_raw_handler jvc_handler = {
-	.protocols	= RC_TYPE_JVC,
+	.protocols	= RC_BIT_JVC,
 	.decode		= ir_jvc_decode,
 };
 

drivers/media/rc/ir-lirc-codec.c

@@ -35,7 +35,7 @@ static int ir_lirc_decode(struct rc_dev *dev, struct ir_raw_event ev)
 	struct lirc_codec *lirc = &dev->raw->lirc;
 	int sample;
 
-	if (!(dev->raw->enabled_protocols & RC_TYPE_LIRC))
+	if (!(dev->raw->enabled_protocols & RC_BIT_LIRC))
 		return 0;
 
 	if (!dev->raw->lirc.drv || !dev->raw->lirc.drv->rbuf)
@@ -408,7 +408,7 @@ static int ir_lirc_unregister(struct rc_dev *dev)
 }
 
 static struct ir_raw_handler lirc_handler = {
-	.protocols	= RC_TYPE_LIRC,
+	.protocols	= RC_BIT_LIRC,
 	.decode		= ir_lirc_decode,
 	.raw_register	= ir_lirc_register,
 	.raw_unregister	= ir_lirc_unregister,

drivers/media/rc/ir-mce_kbd-decoder.c

@@ -216,7 +216,7 @@ static int ir_mce_kbd_decode(struct rc_dev *dev, struct ir_raw_event ev)
 	u32 scancode;
 	unsigned long delay;
 
-	if (!(dev->raw->enabled_protocols & RC_TYPE_MCE_KBD))
+	if (!(dev->raw->enabled_protocols & RC_BIT_MCE_KBD))
 		return 0;
 
 	if (!is_timing_event(ev)) {
@@ -422,7 +422,7 @@ static int ir_mce_kbd_unregister(struct rc_dev *dev)
 }
 
 static struct ir_raw_handler mce_kbd_handler = {
-	.protocols	= RC_TYPE_MCE_KBD,
+	.protocols	= RC_BIT_MCE_KBD,
 	.decode		= ir_mce_kbd_decode,
 	.raw_register	= ir_mce_kbd_register,
 	.raw_unregister	= ir_mce_kbd_unregister,

drivers/media/rc/ir-nec-decoder.c

@@ -52,7 +52,7 @@ static int ir_nec_decode(struct rc_dev *dev, struct ir_raw_event ev)
 	u8 address, not_address, command, not_command;
 	bool send_32bits = false;
 
-	if (!(dev->raw->enabled_protocols & RC_TYPE_NEC))
+	if (!(dev->raw->enabled_protocols & RC_BIT_NEC))
 		return 0;
 
 	if (!is_timing_event(ev)) {
@@ -201,7 +201,7 @@ static int ir_nec_decode(struct rc_dev *dev, struct ir_raw_event ev)
 }
 
 static struct ir_raw_handler nec_handler = {
-	.protocols	= RC_TYPE_NEC,
+	.protocols	= RC_BIT_NEC,
 	.decode		= ir_nec_decode,
 };
 

drivers/media/rc/ir-rc5-decoder.c

@@ -52,7 +52,7 @@ static int ir_rc5_decode(struct rc_dev *dev, struct ir_raw_event ev)
 	u8 toggle;
 	u32 scancode;
 
-        if (!(dev->raw->enabled_protocols & RC_TYPE_RC5))
+	if (!(dev->raw->enabled_protocols & (RC_BIT_RC5 | RC_BIT_RC5X)))
 		return 0;
 
 	if (!is_timing_event(ev)) {
@@ -128,6 +128,10 @@ static int ir_rc5_decode(struct rc_dev *dev, struct ir_raw_event ev)
 		if (data->wanted_bits == RC5X_NBITS) {
 			/* RC5X */
 			u8 xdata, command, system;
+			if (!(dev->raw->enabled_protocols & RC_BIT_RC5X)) {
+				data->state = STATE_INACTIVE;
+				return 0;
+			}
 			xdata    = (data->bits & 0x0003F) >> 0;
 			command  = (data->bits & 0x00FC0) >> 6;
 			system   = (data->bits & 0x1F000) >> 12;
@@ -141,6 +145,10 @@ static int ir_rc5_decode(struct rc_dev *dev, struct ir_raw_event ev)
 		} else {
 			/* RC5 */
 			u8 command, system;
+			if (!(dev->raw->enabled_protocols & RC_BIT_RC5)) {
+				data->state = STATE_INACTIVE;
+				return 0;
+			}
 			command  = (data->bits & 0x0003F) >> 0;
 			system   = (data->bits & 0x007C0) >> 6;
 			toggle   = (data->bits & 0x00800) ? 1 : 0;
@@ -164,7 +172,7 @@ static int ir_rc5_decode(struct rc_dev *dev, struct ir_raw_event ev)
 }
 
 static struct ir_raw_handler rc5_handler = {
-	.protocols	= RC_TYPE_RC5,
+	.protocols	= RC_BIT_RC5 | RC_BIT_RC5X,
 	.decode		= ir_rc5_decode,
 };
 

drivers/media/rc/ir-rc5-sz-decoder.c

@@ -48,7 +48,7 @@ static int ir_rc5_sz_decode(struct rc_dev *dev, struct ir_raw_event ev)
 	u8 toggle, command, system;
 	u32 scancode;
 
-        if (!(dev->raw->enabled_protocols & RC_TYPE_RC5_SZ))
+	if (!(dev->raw->enabled_protocols & RC_BIT_RC5_SZ))
 		return 0;
 
 	if (!is_timing_event(ev)) {
@@ -128,7 +128,7 @@ static int ir_rc5_sz_decode(struct rc_dev *dev, struct ir_raw_event ev)
 }
 
 static struct ir_raw_handler rc5_sz_handler = {
-	.protocols	= RC_TYPE_RC5_SZ,
+	.protocols	= RC_BIT_RC5_SZ,
 	.decode		= ir_rc5_sz_decode,
 };
 

drivers/media/rc/ir-rc6-decoder.c

@@ -89,7 +89,9 @@ static int ir_rc6_decode(struct rc_dev *dev, struct ir_raw_event ev)
 	u32 scancode;
 	u8 toggle;
 
-	if (!(dev->raw->enabled_protocols & RC_TYPE_RC6))
+	if (!(dev->raw->enabled_protocols &
+	      (RC_BIT_RC6_0 | RC_BIT_RC6_6A_20 | RC_BIT_RC6_6A_24 |
+	       RC_BIT_RC6_6A_32 | RC_BIT_RC6_MCE)))
 		return 0;
 
 	if (!is_timing_event(ev)) {
@@ -271,7 +273,9 @@ static int ir_rc6_decode(struct rc_dev *dev, struct ir_raw_event ev)
 }
 
 static struct ir_raw_handler rc6_handler = {
-	.protocols	= RC_TYPE_RC6,
+	.protocols	= RC_BIT_RC6_0 | RC_BIT_RC6_6A_20 |
+			  RC_BIT_RC6_6A_24 | RC_BIT_RC6_6A_32 |
+			  RC_BIT_RC6_MCE,
 	.decode		= ir_rc6_decode,
 };
 

drivers/media/rc/ir-sanyo-decoder.c

@@ -58,7 +58,7 @@ static int ir_sanyo_decode(struct rc_dev *dev, struct ir_raw_event ev)
 	u32 scancode;
 	u8 address, command, not_command;
 
-	if (!(dev->raw->enabled_protocols & RC_TYPE_SANYO))
+	if (!(dev->raw->enabled_protocols & RC_BIT_SANYO))
 		return 0;
 
 	if (!is_timing_event(ev)) {
@@ -179,7 +179,7 @@ static int ir_sanyo_decode(struct rc_dev *dev, struct ir_raw_event ev)
 }
 
 static struct ir_raw_handler sanyo_handler = {
-	.protocols	= RC_TYPE_SANYO,
+	.protocols	= RC_BIT_SANYO,
 	.decode		= ir_sanyo_decode,
 };
 

drivers/media/rc/ir-sony-decoder.c

@@ -45,7 +45,8 @@ static int ir_sony_decode(struct rc_dev *dev, struct ir_raw_event ev)
 	u32 scancode;
 	u8 device, subdevice, function;
 
-	if (!(dev->raw->enabled_protocols & RC_TYPE_SONY))
+	if (!(dev->raw->enabled_protocols &
+	      (RC_BIT_SONY12 | RC_BIT_SONY15 | RC_BIT_SONY20)))
 		return 0;
 
 	if (!is_timing_event(ev)) {
@@ -123,16 +124,28 @@ static int ir_sony_decode(struct rc_dev *dev, struct ir_raw_event ev)
 
 		switch (data->count) {
 		case 12:
+			if (!(dev->raw->enabled_protocols & RC_BIT_SONY12)) {
+				data->state = STATE_INACTIVE;
+				return 0;
+			}
 			device    = bitrev8((data->bits <<  3) & 0xF8);
 			subdevice = 0;
 			function  = bitrev8((data->bits >>  4) & 0xFE);
 			break;
 		case 15:
+			if (!(dev->raw->enabled_protocols & RC_BIT_SONY15)) {
+				data->state = STATE_INACTIVE;
+				return 0;
+			}
 			device    = bitrev8((data->bits >>  0) & 0xFF);
 			subdevice = 0;
 			function  = bitrev8((data->bits >>  7) & 0xFE);
 			break;
 		case 20:
+			if (!(dev->raw->enabled_protocols & RC_BIT_SONY20)) {
+				data->state = STATE_INACTIVE;
+				return 0;
+			}
 			device    = bitrev8((data->bits >>  5) & 0xF8);
 			subdevice = bitrev8((data->bits >>  0) & 0xFF);
 			function  = bitrev8((data->bits >> 12) & 0xFE);
@@ -157,7 +170,7 @@ static int ir_sony_decode(struct rc_dev *dev, struct ir_raw_event ev)
 }
 
 static struct ir_raw_handler sony_handler = {
-	.protocols	= RC_TYPE_SONY,
+	.protocols	= RC_BIT_SONY12 | RC_BIT_SONY15 | RC_BIT_SONY20,
 	.decode		= ir_sony_decode,
 };
 

drivers/media/rc/ite-cir.c

@@ -1563,7 +1563,7 @@ static int ite_probe(struct pnp_dev *pdev, const struct pnp_device_id
 	/* set up ir-core props */
 	rdev->priv = itdev;
 	rdev->driver_type = RC_DRIVER_IR_RAW;
-	rdev->allowed_protos = RC_TYPE_ALL;
+	rdev->allowed_protos = RC_BIT_ALL;
 	rdev->open = ite_open;
 	rdev->close = ite_close;
 	rdev->s_idle = ite_s_idle;

drivers/media/rc/keymaps/rc-imon-mce.c

@@ -121,7 +121,7 @@ static struct rc_map_list imon_mce_map = {
 		.scan    = imon_mce,
 		.size    = ARRAY_SIZE(imon_mce),
 		/* its RC6, but w/a hardware decoder */
-		.rc_type = RC_TYPE_RC6,
+		.rc_type = RC_TYPE_RC6_MCE,
 		.name    = RC_MAP_IMON_MCE,
 	}
 };

drivers/media/rc/keymaps/rc-rc6-mce.c

@@ -97,7 +97,7 @@ static struct rc_map_list rc6_mce_map = {
 	.map = {
 		.scan    = rc6_mce,
 		.size    = ARRAY_SIZE(rc6_mce),
-		.rc_type = RC_TYPE_RC6,
+		.rc_type = RC_TYPE_RC6_MCE,
 		.name    = RC_MAP_RC6_MCE,
 	}
 };

drivers/media/rc/mceusb.c

@@ -1205,7 +1205,7 @@ static struct rc_dev *mceusb_init_rc_dev(struct mceusb_dev *ir)
 	rc->dev.parent = dev;
 	rc->priv = ir;
 	rc->driver_type = RC_DRIVER_IR_RAW;
-	rc->allowed_protos = RC_TYPE_ALL;
+	rc->allowed_protos = RC_BIT_ALL;
 	rc->timeout = MS_TO_NS(100);
 	if (!ir->flags.no_tx) {
 		rc->s_tx_mask = mceusb_set_tx_mask;

drivers/media/rc/nuvoton-cir.c

@@ -1045,7 +1045,7 @@ static int nvt_probe(struct pnp_dev *pdev, const struct pnp_device_id *dev_id)
 	/* Set up the rc device */
 	rdev->priv = nvt;
 	rdev->driver_type = RC_DRIVER_IR_RAW;
-	rdev->allowed_protos = RC_TYPE_ALL;
+	rdev->allowed_protos = RC_BIT_ALL;
 	rdev->open = nvt_open;
 	rdev->close = nvt_close;
 	rdev->tx_ir = nvt_tx_ir;

drivers/media/rc/rc-loopback.c

@@ -195,7 +195,7 @@ static int __init loop_init(void)
 	rc->map_name		= RC_MAP_EMPTY;
 	rc->priv		= &loopdev;
 	rc->driver_type		= RC_DRIVER_IR_RAW;
-	rc->allowed_protos	= RC_TYPE_ALL;
+	rc->allowed_protos	= RC_BIT_ALL;
 	rc->timeout		= 100 * 1000 * 1000; /* 100 ms */
 	rc->min_timeout		= 1;
 	rc->max_timeout		= UINT_MAX;

drivers/media/rc/rc-main.c

@@ -725,25 +725,36 @@ static struct class ir_input_class = {
 	.devnode	= ir_devnode,
 };
 
+/*
+ * These are the protocol textual descriptions that are
+ * used by the sysfs protocols file. Note that the order
+ * of the entries is relevant.
+ */
 static struct {
 	u64	type;
 	char	*name;
 } proto_names[] = {
-	{ RC_TYPE_UNKNOWN,	"unknown"	},
-	{ RC_TYPE_RC5,		"rc-5"		},
-	{ RC_TYPE_NEC,		"nec"		},
-	{ RC_TYPE_RC6,		"rc-6"		},
-	{ RC_TYPE_JVC,		"jvc"		},
-	{ RC_TYPE_SONY,		"sony"		},
-	{ RC_TYPE_RC5_SZ,	"rc-5-sz"	},
-	{ RC_TYPE_SANYO,	"sanyo"		},
-	{ RC_TYPE_MCE_KBD,	"mce_kbd"	},
-	{ RC_TYPE_LIRC,		"lirc"		},
-	{ RC_TYPE_OTHER,	"other"		},
+	{ RC_BIT_NONE,		"none"		},
+	{ RC_BIT_OTHER,		"other"		},
+	{ RC_BIT_UNKNOWN,	"unknown"	},
+	{ RC_BIT_RC5 |
+	  RC_BIT_RC5X,		"rc-5"		},
+	{ RC_BIT_NEC,		"nec"		},
+	{ RC_BIT_RC6_0 |
+	  RC_BIT_RC6_6A_20 |
+	  RC_BIT_RC6_6A_24 |
+	  RC_BIT_RC6_6A_32 |
+	  RC_BIT_RC6_MCE,	"rc-6"		},
+	{ RC_BIT_JVC,		"jvc"		},
+	{ RC_BIT_SONY12 |
+	  RC_BIT_SONY15 |
+	  RC_BIT_SONY20,	"sony"		},
+	{ RC_BIT_RC5_SZ,	"rc-5-sz"	},
+	{ RC_BIT_SANYO,		"sanyo"		},
+	{ RC_BIT_MCE_KBD,	"mce_kbd"	},
+	{ RC_BIT_LIRC,		"lirc"		},
 };
 
-#define PROTO_NONE	"none"
-
 /**
  * show_protocols() - shows the current IR protocol(s)
  * @device:	the device descriptor
@@ -790,6 +801,9 @@ static ssize_t show_protocols(struct device *device,
 			tmp += sprintf(tmp, "[%s] ", proto_names[i].name);
 		else if (allowed & proto_names[i].type)
 			tmp += sprintf(tmp, "%s ", proto_names[i].name);
+
+		if (allowed & proto_names[i].type)
+			allowed &= ~proto_names[i].type;
 	}
 
 	if (tmp != buf)
@@ -867,25 +881,19 @@ static ssize_t store_protocols(struct device *device,
 			disable = false;
 		}
 
-		if (!enable && !disable && !strncasecmp(tmp, PROTO_NONE, sizeof(PROTO_NONE))) {
-			tmp += sizeof(PROTO_NONE);
-			mask = 0;
-			count++;
-		} else {
 		for (i = 0; i < ARRAY_SIZE(proto_names); i++) {
 			if (!strcasecmp(tmp, proto_names[i].name)) {
-					tmp += strlen(proto_names[i].name);
 				mask = proto_names[i].type;
 				break;
 			}
 		}
+
 		if (i == ARRAY_SIZE(proto_names)) {
 			IR_dprintk(1, "Unknown protocol: '%s'\n", tmp);
-				ret = -EINVAL;
-				goto out;
+			return -EINVAL;
 		}
+
 		count++;
-		}
 
 		if (enable)
 			type |= mask;
@@ -902,7 +910,7 @@ static ssize_t store_protocols(struct device *device,
 	}
 
 	if (dev->change_protocol) {
-		rc = dev->change_protocol(dev, type);
+		rc = dev->change_protocol(dev, &type);
 		if (rc < 0) {
 			IR_dprintk(1, "Error setting protocols to 0x%llx\n",
 				   (long long)type);
@@ -1117,7 +1125,8 @@ int rc_register_device(struct rc_dev *dev)
 	}
 
 	if (dev->change_protocol) {
-		rc = dev->change_protocol(dev, rc_map->rc_type);
+		u64 rc_type = (1 << rc_map->rc_type);
+		rc = dev->change_protocol(dev, &rc_type);
 		if (rc < 0)
 			goto out_raw;
 	}

drivers/media/rc/redrat3.c

@@ -1082,7 +1082,7 @@ static struct rc_dev *redrat3_init_rc_dev(struct redrat3_dev *rr3)
 	rc->dev.parent = dev;
 	rc->priv = rr3;
 	rc->driver_type = RC_DRIVER_IR_RAW;
-	rc->allowed_protos = RC_TYPE_ALL;
+	rc->allowed_protos = RC_BIT_ALL;
 	rc->timeout = US_TO_NS(2750);
 	rc->tx_ir = redrat3_transmit_ir;
 	rc->s_tx_carrier = redrat3_set_tx_carrier;

drivers/media/rc/streamzap.c

@@ -322,7 +322,7 @@ static struct rc_dev *streamzap_init_rc_dev(struct streamzap_ir *sz)
 	rdev->dev.parent = dev;
 	rdev->priv = sz;
 	rdev->driver_type = RC_DRIVER_IR_RAW;
-	rdev->allowed_protos = RC_TYPE_ALL;
+	rdev->allowed_protos = RC_BIT_ALL;
 	rdev->driver_name = DRIVER_NAME;
 	rdev->map_name = RC_MAP_STREAMZAP;
 

drivers/media/rc/ttusbir.c

@@ -316,7 +316,7 @@ static int __devinit ttusbir_probe(struct usb_interface *intf,
 	usb_to_input_id(tt->udev, &rc->input_id);
 	rc->dev.parent = &intf->dev;
 	rc->driver_type = RC_DRIVER_IR_RAW;
-	rc->allowed_protos = RC_TYPE_ALL;
+	rc->allowed_protos = RC_BIT_ALL;
 	rc->priv = tt;
 	rc->driver_name = DRIVER_NAME;
 	rc->map_name = RC_MAP_TT_1500;

drivers/media/rc/winbond-cir.c

@@ -1022,7 +1022,7 @@ wbcir_probe(struct pnp_dev *device, const struct pnp_device_id *dev_id)
 	data->dev->priv = data;
 	data->dev->dev.parent = &device->dev;
 	data->dev->timeout = MS_TO_NS(100);
-	data->dev->allowed_protos = RC_TYPE_ALL;
+	data->dev->allowed_protos = RC_BIT_ALL;
 
 	if (!request_region(data->wbase, WAKEUP_IOMEM_LEN, DRVNAME)) {
 		dev_err(dev, "Region 0x%lx-0x%lx already in use!\n",

drivers/media/usb/cx231xx/cx231xx-input.c

@@ -99,7 +99,7 @@ int cx231xx_ir_init(struct cx231xx *dev)
 	/* The i2c micro-controller only outputs the cmd part of NEC protocol */
 	dev->init_data.rc_dev->scanmask = 0xff;
 	dev->init_data.rc_dev->driver_name = "cx231xx";
-	dev->init_data.type = RC_TYPE_NEC;
+	dev->init_data.type = RC_BIT_NEC;
 	info.addr = 0x30;
 
 	/* Load and bind ir-kbd-i2c */

drivers/media/usb/dvb-usb-v2/af9015.c

@@ -1306,7 +1306,7 @@ static int af9015_get_rc_config(struct dvb_usb_device *d, struct dvb_usb_rc *rc)
 	if (!rc->map_name)
 		rc->map_name = RC_MAP_EMPTY;
 
-	rc->allowed_protos = RC_TYPE_NEC;
+	rc->allowed_protos = RC_BIT_NEC;
 	rc->query = af9015_rc_query;
 	rc->interval = 500;
 

drivers/media/usb/dvb-usb-v2/af9035.c

@@ -1023,10 +1023,10 @@ static int af9035_get_rc_config(struct dvb_usb_device *d, struct dvb_usb_rc *rc)
 		switch (tmp) {
 		case 0: /* NEC */
 		default:
-			rc->allowed_protos = RC_TYPE_NEC;
+			rc->allowed_protos = RC_BIT_NEC;
 			break;
 		case 1: /* RC6 */
-			rc->allowed_protos = RC_TYPE_RC6;
+			rc->allowed_protos = RC_BIT_RC6_MCE;
 			break;
 		}
 

drivers/media/usb/dvb-usb-v2/anysee.c

@@ -1048,7 +1048,7 @@ static int anysee_rc_query(struct dvb_usb_device *d)
 
 static int anysee_get_rc_config(struct dvb_usb_device *d, struct dvb_usb_rc *rc)
 {
-	rc->allowed_protos = RC_TYPE_NEC;
+	rc->allowed_protos = RC_BIT_NEC;
 	rc->query          = anysee_rc_query;
 	rc->interval       = 250;  /* windows driver uses 500ms */
 

drivers/media/usb/dvb-usb-v2/az6007.c

@@ -826,7 +826,7 @@ static int az6007_get_rc_config(struct dvb_usb_device *d, struct dvb_usb_rc *rc)
 {
 	pr_debug("Getting az6007 Remote Control properties\n");
 
-	rc->allowed_protos = RC_TYPE_NEC;
+	rc->allowed_protos = RC_BIT_NEC;
 	rc->query          = az6007_rc_query;
 	rc->interval       = 400;
 

drivers/media/usb/dvb-usb-v2/dvb_usb.h

@@ -137,7 +137,7 @@ struct dvb_usb_driver_info {
 struct dvb_usb_rc {
 	const char *map_name;
 	u64 allowed_protos;
-	int (*change_protocol)(struct rc_dev *dev, u64 rc_type);
+	int (*change_protocol)(struct rc_dev *dev, u64 *rc_type);
 	int (*query) (struct dvb_usb_device *d);
 	unsigned int interval;
 	const enum rc_driver_type driver_type;

drivers/media/usb/dvb-usb-v2/it913x.c

@@ -698,7 +698,7 @@ static int it913x_get_rc_config(struct dvb_usb_device *d, struct dvb_usb_rc *rc)
 		return 0;
 	}
 
-	rc->allowed_protos = RC_TYPE_NEC;
+	rc->allowed_protos = RC_BIT_NEC;
 	rc->query = it913x_rc_query;
 	rc->interval = 250;
 

drivers/media/usb/dvb-usb-v2/lmedm04.c

@@ -1253,7 +1253,7 @@ static int lme2510_get_stream_config(struct dvb_frontend *fe, u8 *ts_type,
 static int lme2510_get_rc_config(struct dvb_usb_device *d,
 	struct dvb_usb_rc *rc)
 {
-	rc->allowed_protos = RC_TYPE_NEC;
+	rc->allowed_protos = RC_BIT_NEC;
 	return 0;
 }
 

drivers/media/usb/dvb-usb-v2/rtl28xxu.c

@@ -1197,7 +1197,7 @@ static int rtl2831u_get_rc_config(struct dvb_usb_device *d,
 		struct dvb_usb_rc *rc)
 {
 	rc->map_name = RC_MAP_EMPTY;
-	rc->allowed_protos = RC_TYPE_NEC;
+	rc->allowed_protos = RC_BIT_NEC;
 	rc->query = rtl2831u_rc_query;
 	rc->interval = 400;
 
@@ -1269,7 +1269,7 @@ static int rtl2832u_get_rc_config(struct dvb_usb_device *d,
 		struct dvb_usb_rc *rc)
 {
 	rc->map_name = RC_MAP_EMPTY;
-	rc->allowed_protos = RC_TYPE_NEC;
+	rc->allowed_protos = RC_BIT_NEC;
 	rc->query = rtl2832u_rc_query;
 	rc->interval = 400;
 

drivers/media/usb/dvb-usb/dib0700.h

@@ -64,7 +64,7 @@ extern int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff);
 extern struct i2c_algorithm dib0700_i2c_algo;
 extern int dib0700_identify_state(struct usb_device *udev, struct dvb_usb_device_properties *props,
 			struct dvb_usb_device_description **desc, int *cold);
-extern int dib0700_change_protocol(struct rc_dev *dev, u64 rc_type);
+extern int dib0700_change_protocol(struct rc_dev *dev, u64 *rc_type);
 extern int dib0700_set_i2c_speed(struct dvb_usb_device *d, u16 scl_kHz);
 
 extern int dib0700_device_count;

drivers/media/usb/dvb-usb/dib0700_core.c

@@ -605,7 +605,7 @@ int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
 	return ret;
 }
 
-int dib0700_change_protocol(struct rc_dev *rc, u64 rc_type)
+int dib0700_change_protocol(struct rc_dev *rc, u64 *rc_type)
 {
 	struct dvb_usb_device *d = rc->priv;
 	struct dib0700_state *st = d->priv;
@@ -621,17 +621,19 @@ int dib0700_change_protocol(struct rc_dev *rc, u64 rc_type)
 	st->buf[2] = 0;
 
 	/* Set the IR mode */
-	if (rc_type == RC_TYPE_RC5)
+	if (*rc_type & RC_BIT_RC5) {
 		new_proto = 1;
-	else if (rc_type == RC_TYPE_NEC)
+		*rc_type = RC_BIT_RC5;
+	} else if (*rc_type & RC_BIT_NEC) {
 		new_proto = 0;
-	else if (rc_type == RC_TYPE_RC6) {
+		*rc_type = RC_BIT_NEC;
+	} else if (*rc_type & RC_BIT_RC6_MCE) {
 		if (st->fw_version < 0x10200) {
 			ret = -EINVAL;
 			goto out;
 		}
-
 		new_proto = 2;
+		*rc_type = RC_BIT_RC6_MCE;
 	} else {
 		ret = -EINVAL;
 		goto out;
@@ -645,7 +647,7 @@ int dib0700_change_protocol(struct rc_dev *rc, u64 rc_type)
 		goto out;
 	}
 
-	d->props.rc.core.protocol = rc_type;
+	d->props.rc.core.protocol = *rc_type;
 
 out:
 	mutex_unlock(&d->usb_mutex);
@@ -707,7 +709,7 @@ static void dib0700_rc_urb_completion(struct urb *purb)
 		 purb->actual_length);
 
 	switch (d->props.rc.core.protocol) {
-	case RC_TYPE_NEC:
+	case RC_BIT_NEC:
 		toggle = 0;
 
 		/* NEC protocol sends repeat code as 0 0 0 FF */

drivers/media/usb/dvb-usb/dib0700_devices.c

@@ -518,7 +518,7 @@ static int dib0700_rc_query_old_firmware(struct dvb_usb_device *d)
 
 	d->last_event = 0;
 	switch (d->props.rc.core.protocol) {
-	case RC_TYPE_NEC:
+	case RC_BIT_NEC:
 		/* NEC protocol sends repeat code as 0 0 0 FF */
 		if ((key[3-2] == 0x00) && (key[3-3] == 0x00) &&
 		    (key[3] == 0xff))
@@ -3658,9 +3658,9 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_interval      = DEFAULT_RC_INTERVAL,
 			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = RC_TYPE_RC5 |
-					    RC_TYPE_RC6 |
-					    RC_TYPE_NEC,
+			.allowed_protos   = RC_BIT_RC5 |
+					    RC_BIT_RC6_MCE |
+					    RC_BIT_NEC,
 			.change_protocol  = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
@@ -3698,9 +3698,9 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_interval      = DEFAULT_RC_INTERVAL,
 			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = RC_TYPE_RC5 |
-					    RC_TYPE_RC6 |
-					    RC_TYPE_NEC,
+			.allowed_protos   = RC_BIT_RC5 |
+					    RC_BIT_RC6_MCE |
+					    RC_BIT_NEC,
 			.change_protocol = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
@@ -3763,9 +3763,9 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_interval      = DEFAULT_RC_INTERVAL,
 			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = RC_TYPE_RC5 |
-					    RC_TYPE_RC6 |
-					    RC_TYPE_NEC,
+			.allowed_protos   = RC_BIT_RC5 |
+					    RC_BIT_RC6_MCE |
+					    RC_BIT_NEC,
 			.change_protocol = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
@@ -3808,9 +3808,9 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
 			.module_name	  = "dib0700",
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = RC_TYPE_RC5 |
-					    RC_TYPE_RC6 |
-					    RC_TYPE_NEC,
+			.allowed_protos   = RC_BIT_RC5 |
+					    RC_BIT_RC6_MCE |
+					    RC_BIT_NEC,
 			.change_protocol = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
@@ -3890,9 +3890,9 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
 			.module_name	  = "dib0700",
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = RC_TYPE_RC5 |
-					    RC_TYPE_RC6 |
-					    RC_TYPE_NEC,
+			.allowed_protos   = RC_BIT_RC5 |
+					    RC_BIT_RC6_MCE |
+					    RC_BIT_NEC,
 			.change_protocol  = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
@@ -3936,9 +3936,9 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
 			.module_name	  = "dib0700",
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = RC_TYPE_RC5 |
-					    RC_TYPE_RC6 |
-					    RC_TYPE_NEC,
+			.allowed_protos   = RC_BIT_RC5 |
+					    RC_BIT_RC6_MCE |
+					    RC_BIT_NEC,
 			.change_protocol  = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
@@ -3987,9 +3987,9 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
 			.module_name	  = "dib0700",
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = RC_TYPE_RC5 |
-					    RC_TYPE_RC6 |
-					    RC_TYPE_NEC,
+			.allowed_protos   = RC_BIT_RC5 |
+					    RC_BIT_RC6_MCE |
+					    RC_BIT_NEC,
 			.change_protocol = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
@@ -4055,9 +4055,9 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
 			.module_name	  = "dib0700",
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = RC_TYPE_RC5 |
-					    RC_TYPE_RC6 |
-					    RC_TYPE_NEC,
+			.allowed_protos   = RC_BIT_RC5 |
+					    RC_BIT_RC6_MCE |
+					    RC_BIT_NEC,
 			.change_protocol = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
@@ -4106,9 +4106,9 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_codes         = RC_MAP_DIB0700_NEC_TABLE,
 			.module_name	  = "dib0700",
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = RC_TYPE_RC5 |
-					    RC_TYPE_RC6 |
-					    RC_TYPE_NEC,
+			.allowed_protos   = RC_BIT_RC5 |
+					    RC_BIT_RC6_MCE |
+					    RC_BIT_NEC,
 			.change_protocol  = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
@@ -4177,9 +4177,9 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
 			.module_name	  = "dib0700",
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = RC_TYPE_RC5 |
-					    RC_TYPE_RC6 |
-					    RC_TYPE_NEC,
+			.allowed_protos   = RC_BIT_RC5 |
+					    RC_BIT_RC6_MCE |
+					    RC_BIT_NEC,
 			.change_protocol  = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
@@ -4215,9 +4215,9 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
 			.module_name	  = "dib0700",
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = RC_TYPE_RC5 |
-					    RC_TYPE_RC6 |
-					    RC_TYPE_NEC,
+			.allowed_protos   = RC_BIT_RC5 |
+					    RC_BIT_RC6_MCE |
+					    RC_BIT_NEC,
 			.change_protocol  = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
@@ -4295,9 +4295,9 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
 			.module_name	  = "dib0700",
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = RC_TYPE_RC5 |
-					    RC_TYPE_RC6 |
-					    RC_TYPE_NEC,
+			.allowed_protos   = RC_BIT_RC5 |
+					    RC_BIT_RC6_MCE |
+					    RC_BIT_NEC,
 			.change_protocol  = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
@@ -4341,9 +4341,9 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_codes         = RC_MAP_DIB0700_NEC_TABLE,
 			.module_name	  = "dib0700",
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = RC_TYPE_RC5 |
-					    RC_TYPE_RC6 |
-					    RC_TYPE_NEC,
+			.allowed_protos   = RC_BIT_RC5 |
+					    RC_BIT_RC6_MCE |
+					    RC_BIT_NEC,
 			.change_protocol  = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
@@ -4394,9 +4394,9 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
 			.module_name	  = "dib0700",
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = RC_TYPE_RC5 |
-					    RC_TYPE_RC6 |
-					    RC_TYPE_NEC,
+			.allowed_protos   = RC_BIT_RC5 |
+					    RC_BIT_RC6_MCE |
+					    RC_BIT_NEC,
 			.change_protocol  = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
@@ -4433,9 +4433,9 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
 			.module_name	  = "dib0700",
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = RC_TYPE_RC5 |
-					    RC_TYPE_RC6 |
-					    RC_TYPE_NEC,
+			.allowed_protos   = RC_BIT_RC5 |
+					    RC_BIT_RC6_MCE |
+					    RC_BIT_NEC,
 			.change_protocol  = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
@@ -4472,9 +4472,9 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
 			.module_name	  = "dib0700",
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = RC_TYPE_RC5 |
-					    RC_TYPE_RC6 |
-					    RC_TYPE_NEC,
+			.allowed_protos   = RC_BIT_RC5 |
+					    RC_BIT_RC6_MCE |
+					    RC_BIT_NEC,
 			.change_protocol  = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
@@ -4511,9 +4511,9 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
 			.module_name	  = "dib0700",
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = RC_TYPE_RC5 |
-					    RC_TYPE_RC6 |
-					    RC_TYPE_NEC,
+			.allowed_protos   = RC_BIT_RC5 |
+					    RC_BIT_RC6_MCE |
+					    RC_BIT_NEC,
 			.change_protocol  = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
@@ -4550,9 +4550,9 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
 			.module_name	  = "dib0700",
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = RC_TYPE_RC5 |
-					    RC_TYPE_RC6 |
-					    RC_TYPE_NEC,
+			.allowed_protos   = RC_BIT_RC5 |
+					    RC_BIT_RC6_MCE |
+					    RC_BIT_NEC,
 			.change_protocol  = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
@@ -4589,9 +4589,9 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
 			.module_name	  = "dib0700",
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = RC_TYPE_RC5 |
-					    RC_TYPE_RC6 |
-					    RC_TYPE_NEC,
+			.allowed_protos   = RC_BIT_RC5 |
+					    RC_BIT_RC6_MCE |
+					    RC_BIT_NEC,
 			.change_protocol  = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
@@ -4644,9 +4644,9 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
 			.module_name	  = "dib0700",
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = RC_TYPE_RC5 |
-					    RC_TYPE_RC6 |
-					    RC_TYPE_NEC,
+			.allowed_protos   = RC_BIT_RC5 |
+					    RC_BIT_RC6_MCE |
+					    RC_BIT_NEC,
 			.change_protocol  = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
@@ -4681,9 +4681,9 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
 			.module_name	  = "dib0700",
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = RC_TYPE_RC5 |
-					    RC_TYPE_RC6 |
-					    RC_TYPE_NEC,
+			.allowed_protos   = RC_BIT_RC5 |
+					    RC_BIT_RC6_MCE |
+					    RC_BIT_NEC,
 			.change_protocol  = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
@@ -4721,9 +4721,9 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
 			.module_name	  = "dib0700",
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = RC_TYPE_RC5 |
-					    RC_TYPE_RC6 |
-					    RC_TYPE_NEC,
+			.allowed_protos   = RC_BIT_RC5 |
+					    RC_BIT_RC6_MCE |
+					    RC_BIT_NEC,
 			.change_protocol  = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
@@ -4761,9 +4761,9 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
 			.module_name	  = "dib0700",
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = RC_TYPE_RC5 |
-					    RC_TYPE_RC6 |
-					    RC_TYPE_NEC,
+			.allowed_protos   = RC_BIT_RC5 |
+					    RC_BIT_RC6_MCE |
+					    RC_BIT_NEC,
 			.change_protocol  = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
@@ -4802,9 +4802,9 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
 			.module_name	  = "dib0700",
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.allowed_protos   = RC_TYPE_RC5 |
-					    RC_TYPE_RC6 |
-					    RC_TYPE_NEC,
+			.allowed_protos   = RC_BIT_RC5 |
+					    RC_BIT_RC6_MCE |
+					    RC_BIT_NEC,
 			.change_protocol  = dib0700_change_protocol,
 		},
 	},

drivers/media/usb/dvb-usb/dvb-usb.h

@@ -202,7 +202,7 @@ struct dvb_rc {
 	u64 protocol;
 	u64 allowed_protos;
 	enum rc_driver_type driver_type;
-	int (*change_protocol)(struct rc_dev *dev, u64 rc_type);
+	int (*change_protocol)(struct rc_dev *dev, u64 *rc_type);
 	char *module_name;
 	int (*rc_query) (struct dvb_usb_device *d);
 	int rc_interval;

drivers/media/usb/dvb-usb/pctv452e.c

@@ -927,7 +927,7 @@ static struct dvb_usb_device_properties pctv452e_properties = {
 
 	.rc.core = {
 		.rc_codes	= RC_MAP_DIB0700_RC5_TABLE,
-		.allowed_protos	= RC_TYPE_UNKNOWN,
+		.allowed_protos	= RC_BIT_UNKNOWN,
 		.rc_query	= pctv452e_rc_query,
 		.rc_interval	= 100,
 	},
@@ -980,7 +980,7 @@ static struct dvb_usb_device_properties tt_connect_s2_3600_properties = {
 
 	.rc.core = {
 		.rc_codes	= RC_MAP_TT_1500,
-		.allowed_protos	= RC_TYPE_UNKNOWN,
+		.allowed_protos	= RC_BIT_UNKNOWN,
 		.rc_query	= pctv452e_rc_query,
 		.rc_interval	= 100,
 	},

drivers/media/usb/dvb-usb/technisat-usb2.c

@@ -732,7 +732,7 @@ static struct dvb_usb_device_properties technisat_usb2_devices = {
 		.rc_codes    = RC_MAP_TECHNISAT_USB2,
 		.module_name = "technisat-usb2",
 		.rc_query    = technisat_usb2_rc_query,
-		.allowed_protos = RC_TYPE_ALL,
+		.allowed_protos = RC_BIT_ALL,
 		.driver_type    = RC_DRIVER_IR_RAW,
 	}
 };

drivers/media/usb/dvb-usb/ttusb2.c

@@ -741,7 +741,7 @@ static struct dvb_usb_device_properties ttusb2_properties_ct3650 = {
 		.rc_interval      = 150, /* Less than IR_KEYPRESS_TIMEOUT */
 		.rc_codes         = RC_MAP_TT_1500,
 		.rc_query         = tt3650_rc_query,
-		.allowed_protos   = RC_TYPE_UNKNOWN,
+		.allowed_protos   = RC_BIT_UNKNOWN,
 	},
 
 	.num_adapters = 1,

drivers/media/usb/em28xx/em28xx-input.c

@@ -345,7 +345,7 @@ static void em28xx_ir_stop(struct rc_dev *rc)
 	cancel_delayed_work_sync(&ir->work);
 }
 
-static int em28xx_ir_change_protocol(struct rc_dev *rc_dev, u64 rc_type)
+static int em28xx_ir_change_protocol(struct rc_dev *rc_dev, u64 *rc_type)
 {
 	int rc = 0;
 	struct em28xx_IR *ir = rc_dev->priv;
@@ -354,14 +354,16 @@ static int em28xx_ir_change_protocol(struct rc_dev *rc_dev, u64 rc_type)
 
 	/* Adjust xclk based o IR table for RC5/NEC tables */
 
-	if (rc_type == RC_TYPE_RC5) {
+	if (*rc_type & RC_BIT_RC5) {
 		dev->board.xclk |= EM28XX_XCLK_IR_RC5_MODE;
 		ir->full_code = 1;
-	} else if (rc_type == RC_TYPE_NEC) {
+		*rc_type = RC_BIT_RC5;
+	} else if (*rc_type & RC_BIT_NEC) {
 		dev->board.xclk &= ~EM28XX_XCLK_IR_RC5_MODE;
 		ir_config = EM2874_IR_NEC;
 		ir->full_code = 1;
-	} else if (rc_type != RC_TYPE_UNKNOWN)
+		*rc_type = RC_BIT_NEC;
+	} else if (*rc_type != RC_BIT_UNKNOWN)
 		rc = -EINVAL;
 
 	em28xx_write_reg_bits(dev, EM28XX_R0F_XCLK, dev->board.xclk,
@@ -524,6 +526,7 @@ static int em28xx_ir_init(struct em28xx *dev)
 	struct em28xx_IR *ir;
 	struct rc_dev *rc;
 	int err = -ENOMEM;
+	u64 rc_type;
 
 	if (dev->board.ir_codes == NULL) {
 		/* No remote control support */
@@ -546,14 +549,15 @@ static int em28xx_ir_init(struct em28xx *dev)
 	 * em2874 supports more protocols. For now, let's just announce
 	 * the two protocols that were already tested
 	 */
-	rc->allowed_protos = RC_TYPE_RC5 | RC_TYPE_NEC;
+	rc->allowed_protos = RC_BIT_RC5 | RC_BIT_NEC;
 	rc->priv = ir;
 	rc->change_protocol = em28xx_ir_change_protocol;
 	rc->open = em28xx_ir_start;
 	rc->close = em28xx_ir_stop;
 
 	/* By default, keep protocol field untouched */
-	err = em28xx_ir_change_protocol(rc, RC_TYPE_UNKNOWN);
+	rc_type = RC_BIT_UNKNOWN;
+	err = em28xx_ir_change_protocol(rc, &rc_type);
 	if (err)
 		goto err_out_free;
 

drivers/media/usb/hdpvr/hdpvr-i2c.c

@@ -55,7 +55,7 @@ struct i2c_client *hdpvr_register_ir_rx_i2c(struct hdpvr_device *dev)
 	/* Our default information for ir-kbd-i2c.c to use */
 	init_data->ir_codes = RC_MAP_HAUPPAUGE;
 	init_data->internal_get_key_func = IR_KBD_GET_KEY_HAUP_XVR;
-	init_data->type = RC_TYPE_RC5;
+	init_data->type = RC_BIT_RC5;
 	init_data->name = "HD-PVR";
 	init_data->polling_interval = 405; /* ms, duplicated from Windows */
 	hdpvr_ir_rx_i2c_board_info.platform_data = init_data;

drivers/media/usb/pvrusb2/pvrusb2-i2c-core.c

@@ -581,7 +581,7 @@ static void pvr2_i2c_register_ir(struct pvr2_hdw *hdw)
 	case PVR2_IR_SCHEME_29XXX: /* Original 29xxx device */
 		init_data->ir_codes              = RC_MAP_HAUPPAUGE;
 		init_data->internal_get_key_func = IR_KBD_GET_KEY_HAUP;
-		init_data->type                  = RC_TYPE_RC5;
+		init_data->type                  = RC_BIT_RC5;
 		init_data->name                  = hdw->hdw_desc->description;
 		init_data->polling_interval      = 100; /* ms From ir-kbd-i2c */
 		/* IR Receiver */
@@ -596,7 +596,7 @@ static void pvr2_i2c_register_ir(struct pvr2_hdw *hdw)
 	case PVR2_IR_SCHEME_24XXX_MCE: /* 24xxx MCE device */
 		init_data->ir_codes              = RC_MAP_HAUPPAUGE;
 		init_data->internal_get_key_func = IR_KBD_GET_KEY_HAUP_XVR;
-		init_data->type                  = RC_TYPE_RC5;
+		init_data->type                  = RC_BIT_RC5;
 		init_data->name                  = hdw->hdw_desc->description;
 		/* IR Receiver */
 		info.addr          = 0x71;

drivers/media/usb/tm6000/tm6000-input.c

@@ -109,12 +109,12 @@ static int tm6000_ir_config(struct tm6000_IR *ir)
 	 */
 
 	switch (ir->rc_type) {
-	case RC_TYPE_NEC:
+	case RC_BIT_NEC:
 		leader = 900;	/* ms */
 		pulse  = 700;	/* ms - the actual value would be 562 */
 		break;
 	default:
-	case RC_TYPE_RC5:
+	case RC_BIT_RC5:
 		leader = 900;	/* ms - from the NEC decoding */
 		pulse  = 1780;	/* ms - The actual value would be 1776 */
 		break;
@@ -122,12 +122,12 @@ static int tm6000_ir_config(struct tm6000_IR *ir)
 
 	pulse = ir_clock_mhz * pulse;
 	leader = ir_clock_mhz * leader;
-	if (ir->rc_type == RC_TYPE_NEC)
+	if (ir->rc_type == RC_BIT_NEC)
 		leader = leader | 0x8000;
 
 	dprintk(2, "%s: %s, %d MHz, leader = 0x%04x, pulse = 0x%06x \n",
 		__func__,
-		(ir->rc_type == RC_TYPE_NEC) ? "NEC" : "RC-5",
+		(ir->rc_type == RC_BIT_NEC) ? "NEC" : "RC-5",
 		ir_clock_mhz, leader, pulse);
 
 	/* Remote WAKEUP = enable, normal mode, from IR decoder output */
@@ -297,7 +297,7 @@ static void tm6000_ir_stop(struct rc_dev *rc)
 	cancel_delayed_work_sync(&ir->work);
 }
 
-static int tm6000_ir_change_protocol(struct rc_dev *rc, u64 rc_type)
+static int tm6000_ir_change_protocol(struct rc_dev *rc, u64 *rc_type)
 {
 	struct tm6000_IR *ir = rc->priv;
 
@@ -306,10 +306,10 @@ static int tm6000_ir_change_protocol(struct rc_dev *rc, u64 rc_type)
 
 	dprintk(2, "%s\n",__func__);
 
-	if ((rc->rc_map.scan) && (rc_type == RC_TYPE_NEC))
+	if ((rc->rc_map.scan) && (*rc_type == RC_BIT_NEC))
 		ir->key_addr = ((rc->rc_map.scan[0].scancode >> 8) & 0xffff);
 
-	ir->rc_type = rc_type;
+	ir->rc_type = *rc_type;
 
 	tm6000_ir_config(ir);
 	/* TODO */
@@ -398,6 +398,7 @@ int tm6000_ir_init(struct tm6000_core *dev)
 	struct tm6000_IR *ir;
 	struct rc_dev *rc;
 	int err = -ENOMEM;
+	u64 rc_type;
 
 	if (!enable_ir)
 		return -ENODEV;
@@ -421,7 +422,7 @@ int tm6000_ir_init(struct tm6000_core *dev)
 	ir->rc = rc;
 
 	/* input setup */
-	rc->allowed_protos = RC_TYPE_RC5 | RC_TYPE_NEC;
+	rc->allowed_protos = RC_BIT_RC5 | RC_BIT_NEC;
 	/* Neded, in order to support NEC remotes with 24 or 32 bits */
 	rc->scanmask = 0xffff;
 	rc->priv = ir;
@@ -444,7 +445,8 @@ int tm6000_ir_init(struct tm6000_core *dev)
 	usb_make_path(dev->udev, ir->phys, sizeof(ir->phys));
 	strlcat(ir->phys, "/input0", sizeof(ir->phys));
 
-	tm6000_ir_change_protocol(rc, RC_TYPE_UNKNOWN);
+	rc_type = RC_BIT_UNKNOWN;
+	tm6000_ir_change_protocol(rc, &rc_type);
 
 	rc->input_name = ir->name;
 	rc->input_phys = ir->phys;

include/media/ir-kbd-i2c.h

@@ -37,7 +37,7 @@ enum ir_kbd_get_key_fn {
 struct IR_i2c_init_data {
 	char			*ir_codes;
 	const char		*name;
-	u64			type; /* RC_TYPE_RC5, etc */
+	u64			type; /* RC_BIT_RC5, etc */
 	u32			polling_interval; /* 0 means DEFAULT_POLLING_INTERVAL */
 
 	/*

include/media/rc-core.h

@@ -50,7 +50,7 @@ enum rc_driver_type {
  * @input_dev: the input child device used to communicate events to userspace
  * @driver_type: specifies if protocol decoding is done in hardware or software
  * @idle: used to keep track of RX state
- * @allowed_protos: bitmask with the supported RC_TYPE_* protocols
+ * @allowed_protos: bitmask with the supported RC_BIT_* protocols
  * @scanmask: some hardware decoders are not capable of providing the full
  *	scancode to the application. As this is a hardware limit, we can't do
  *	anything with it. Yet, as the same keycode table can be used with other
@@ -113,7 +113,7 @@ struct rc_dev {
 	u32				max_timeout;
 	u32				rx_resolution;
 	u32				tx_resolution;
-	int				(*change_protocol)(struct rc_dev *dev, u64 rc_type);
+	int				(*change_protocol)(struct rc_dev *dev, u64 *rc_type);
 	int				(*open)(struct rc_dev *dev);
 	void				(*close)(struct rc_dev *dev);
 	int				(*s_tx_mask)(struct rc_dev *dev, u32 mask);

include/media/rc-map.h

@@ -11,22 +11,54 @@
 
 #include <linux/input.h>
 
-#define RC_TYPE_UNKNOWN	0
-#define RC_TYPE_RC5	(1  << 0)	/* Philips RC5 protocol */
-#define RC_TYPE_NEC	(1  << 1)
-#define RC_TYPE_RC6	(1  << 2)	/* Philips RC6 protocol */
-#define RC_TYPE_JVC	(1  << 3)	/* JVC protocol */
-#define RC_TYPE_SONY	(1  << 4)	/* Sony12/15/20 protocol */
-#define RC_TYPE_RC5_SZ	(1  << 5)	/* RC5 variant used by Streamzap */
-#define RC_TYPE_SANYO   (1  << 6)	/* Sanyo protocol */
-#define RC_TYPE_MCE_KBD	(1  << 29)	/* RC6-ish MCE keyboard/mouse */
-#define RC_TYPE_LIRC	(1  << 30)	/* Pass raw IR to lirc userspace */
-#define RC_TYPE_OTHER	(1u << 31)
+enum rc_type {
+	RC_TYPE_UNKNOWN		= 0,	/* Protocol not known */
+	RC_TYPE_OTHER		= 1,	/* Protocol known but proprietary */
+	RC_TYPE_LIRC		= 2,	/* Pass raw IR to lirc userspace */
+	RC_TYPE_RC5		= 3,	/* Philips RC5 protocol */
+	RC_TYPE_RC5X		= 4,	/* Philips RC5x protocol */
+	RC_TYPE_RC5_SZ		= 5,	/* StreamZap variant of RC5 */
+	RC_TYPE_JVC		= 6,	/* JVC protocol */
+	RC_TYPE_SONY12		= 7,	/* Sony 12 bit protocol */
+	RC_TYPE_SONY15		= 8,	/* Sony 15 bit protocol */
+	RC_TYPE_SONY20		= 9,	/* Sony 20 bit protocol */
+	RC_TYPE_NEC		= 10,	/* NEC protocol */
+	RC_TYPE_SANYO		= 11,	/* Sanyo protocol */
+	RC_TYPE_MCE_KBD		= 12,	/* RC6-ish MCE keyboard/mouse */
+	RC_TYPE_RC6_0		= 13,	/* Philips RC6-0-16 protocol */
+	RC_TYPE_RC6_6A_20	= 14,	/* Philips RC6-6A-20 protocol */
+	RC_TYPE_RC6_6A_24	= 15,	/* Philips RC6-6A-24 protocol */
+	RC_TYPE_RC6_6A_32	= 16,	/* Philips RC6-6A-32 protocol */
+	RC_TYPE_RC6_MCE		= 17,	/* MCE (Philips RC6-6A-32 subtype) protocol */
+};
+
+#define RC_BIT_NONE		0
+#define RC_BIT_UNKNOWN		(1 << RC_TYPE_UNKNOWN)
+#define RC_BIT_OTHER		(1 << RC_TYPE_OTHER)
+#define RC_BIT_LIRC		(1 << RC_TYPE_LIRC)
+#define RC_BIT_RC5		(1 << RC_TYPE_RC5)
+#define RC_BIT_RC5X		(1 << RC_TYPE_RC5X)
+#define RC_BIT_RC5_SZ		(1 << RC_TYPE_RC5_SZ)
+#define RC_BIT_JVC		(1 << RC_TYPE_JVC)
+#define RC_BIT_SONY12		(1 << RC_TYPE_SONY12)
+#define RC_BIT_SONY15		(1 << RC_TYPE_SONY15)
+#define RC_BIT_SONY20		(1 << RC_TYPE_SONY20)
+#define RC_BIT_NEC		(1 << RC_TYPE_NEC)
+#define RC_BIT_SANYO		(1 << RC_TYPE_SANYO)
+#define RC_BIT_MCE_KBD		(1 << RC_TYPE_MCE_KBD)
+#define RC_BIT_RC6_0		(1 << RC_TYPE_RC6_0)
+#define RC_BIT_RC6_6A_20	(1 << RC_TYPE_RC6_6A_20)
+#define RC_BIT_RC6_6A_24	(1 << RC_TYPE_RC6_6A_24)
+#define RC_BIT_RC6_6A_32	(1 << RC_TYPE_RC6_6A_32)
+#define RC_BIT_RC6_MCE		(1 << RC_TYPE_RC6_MCE)
 
-#define RC_TYPE_ALL (RC_TYPE_RC5    | RC_TYPE_NEC   | RC_TYPE_RC6     | \
-		     RC_TYPE_JVC    | RC_TYPE_SONY  | RC_TYPE_LIRC    | \
-		     RC_TYPE_RC5_SZ | RC_TYPE_SANYO | RC_TYPE_MCE_KBD | \
-		     RC_TYPE_OTHER)
+#define RC_BIT_ALL	(RC_BIT_UNKNOWN | RC_BIT_OTHER | RC_BIT_LIRC | \
+			 RC_BIT_RC5 | RC_BIT_RC5X | RC_BIT_RC5_SZ | \
+			 RC_BIT_JVC | \
+			 RC_BIT_SONY12 | RC_BIT_SONY15 | RC_BIT_SONY20 | \
+			 RC_BIT_NEC | RC_BIT_SANYO | RC_BIT_MCE_KBD | \
+			 RC_BIT_RC6_0 | RC_BIT_RC6_6A_20 | RC_BIT_RC6_6A_24 | \
+			 RC_BIT_RC6_6A_32 | RC_BIT_RC6_MCE)
 
 struct rc_map_table {
 	u32	scancode;
@@ -38,7 +70,7 @@ struct rc_map {
 	unsigned int		size;	/* Max number of entries */
 	unsigned int		len;	/* Used number of entries */
 	unsigned int		alloc;	/* Size of *scan in bytes */
-	u64			rc_type;
+	enum rc_type		rc_type;
 	const char		*name;
 	spinlock_t		lock;
 };