Skip to content

L
linux
Commit c01a3595 authored by Antti Palosaari's avatar Antti Palosaari Committed by Mauro Carvalho Chehab
Browse files
Options

[media] rtl28xxu: convert to new DVB USB 

Tested-by: default avatarHin-Tak Leung <htl10@users.sourceforge.net>
Signed-off-by: default avatarAntti Palosaari <crope@iki.fi>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent d584b838
Show whitespace changes
Inline Side-by-side
Showing with 260 additions and 405 deletions
drivers/media/dvb/dvb-usb-v2/Kconfig
View file @ c01a3595
......@@ -124,3 +124,16 @@ config DVB_USB_MXL111SF
help
Say Y here to support the MxL111SF USB2.0 DTV receiver.
config DVB_USB_RTL28XXU
tristate "Realtek RTL28xxU DVB USB support"
depends on DVB_USB_V2 && EXPERIMENTAL
select DVB_RTL2830
select DVB_RTL2832
select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMISE
select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE
select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE
select MEDIA_TUNER_FC0012 if !MEDIA_TUNER_CUSTOMISE
select MEDIA_TUNER_FC0013 if !MEDIA_TUNER_CUSTOMISE
help
Say Y here to support the Realtek RTL28xxU DVB USB receiver.
drivers/media/dvb/dvb-usb-v2/Makefile
View file @ c01a3595
......@@ -36,6 +36,9 @@ obj-$(CONFIG_DVB_USB_MXL111SF) += dvb-usb-mxl111sf.o
obj-$(CONFIG_DVB_USB_MXL111SF) += mxl111sf-demod.o
obj-$(CONFIG_DVB_USB_MXL111SF) += mxl111sf-tuner.o
dvb-usb-rtl28xxu-objs = rtl28xxu.o
obj-$(CONFIG_DVB_USB_RTL28XXU) += dvb-usb-rtl28xxu.o
ccflags-y += -I$(srctree)/drivers/media/dvb/dvb-core
ccflags-y += -I$(srctree)/drivers/media/dvb/frontends/
ccflags-y += -I$(srctree)/drivers/media/common/tuners
......
drivers/media/dvb/dvb-usb/rtl28xxu.c → drivers/media/dvb/dvb-usb-v2/rtl28xxu.c
View file @ c01a3595
......@@ -31,10 +31,6 @@
#include "fc0012.h"
#include "fc0013.h"
/* debug */
static int dvb_usb_rtl28xxu_debug;
module_param_named(debug, dvb_usb_rtl28xxu_debug, int, 0644);
MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS);
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
static int rtl28xxu_ctrl_msg(struct dvb_usb_device *d, struct rtl28xxu_req *req)
......@@ -66,8 +62,7 @@ static int rtl28xxu_ctrl_msg(struct dvb_usb_device *d, struct rtl28xxu_req *req)
if (ret > 0)
ret = 0;
deb_dump(0, requesttype, req->value, req->index, buf, req->size,
deb_xfer);
deb_dump(0, requesttype, req->value, req->index, buf, req->size);
/* read request, copy returned data to return buf */
if (!ret && requesttype == (USB_TYPE_VENDOR | USB_DIR_IN))
......@@ -80,7 +75,7 @@ static int rtl28xxu_ctrl_msg(struct dvb_usb_device *d, struct rtl28xxu_req *req)
return ret;
err:
deb_info("%s: failed=%d\n", __func__, ret);
dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
......@@ -291,7 +286,8 @@ static struct rtl2830_config rtl28xxu_rtl2830_mxl5005s_config = {
static int rtl2831u_frontend_attach(struct dvb_usb_adapter *adap)
{
int ret;
struct rtl28xxu_priv *priv = adap->dev->priv;
struct dvb_usb_device *d = adap_to_d(adap);
struct rtl28xxu_priv *priv = d_to_priv(d);
u8 buf[1];
struct rtl2830_config *rtl2830_config;
/* open RTL2831U/RTL2830 I2C gate */
......@@ -301,7 +297,7 @@ static int rtl2831u_frontend_attach(struct dvb_usb_adapter *adap)
/* for QT1010 tuner probe */
struct rtl28xxu_req req_qt1010 = { 0x0fc4, CMD_I2C_RD, 1, buf };
deb_info("%s:\n", __func__);
dev_dbg(&d->udev->dev, "%s:\n", __func__);
/*
* RTL2831U GPIOs
......@@ -312,12 +308,12 @@ static int rtl2831u_frontend_attach(struct dvb_usb_adapter *adap)
*/
/* GPIO direction */
ret = rtl28xx_wr_reg(adap->dev, SYS_GPIO_DIR, 0x0a);
ret = rtl28xx_wr_reg(d, SYS_GPIO_DIR, 0x0a);
if (ret)
goto err;
/* enable as output GPIO0, GPIO2, GPIO4 */
ret = rtl28xx_wr_reg(adap->dev, SYS_GPIO_OUT_EN, 0x15);
ret = rtl28xx_wr_reg(d, SYS_GPIO_OUT_EN, 0x15);
if (ret)
goto err;
......@@ -330,36 +326,36 @@ static int rtl2831u_frontend_attach(struct dvb_usb_adapter *adap)
msleep(20);
/* open demod I2C gate */
ret = rtl28xxu_ctrl_msg(adap->dev, &req_gate);
ret = rtl28xxu_ctrl_msg(d, &req_gate);
if (ret)
goto err;
/* check QT1010 ID(?) register; reg=0f val=2c */
ret = rtl28xxu_ctrl_msg(adap->dev, &req_qt1010);
ret = rtl28xxu_ctrl_msg(d, &req_qt1010);
if (ret == 0 && buf[0] == 0x2c) {
priv->tuner = TUNER_RTL2830_QT1010;
rtl2830_config = &rtl28xxu_rtl2830_qt1010_config;
deb_info("%s: QT1010\n", __func__);
dev_dbg(&d->udev->dev, "%s: QT1010\n", __func__);
goto found;
} else {
deb_info("%s: QT1010 probe failed=%d - %02x\n",
dev_dbg(&d->udev->dev, "%s: QT1010 probe failed=%d - %02x\n",
__func__, ret, buf[0]);
}
/* open demod I2C gate */
ret = rtl28xxu_ctrl_msg(adap->dev, &req_gate);
ret = rtl28xxu_ctrl_msg(d, &req_gate);
if (ret)
goto err;
/* check MT2060 ID register; reg=00 val=63 */
ret = rtl28xxu_ctrl_msg(adap->dev, &req_mt2060);
ret = rtl28xxu_ctrl_msg(d, &req_mt2060);
if (ret == 0 && buf[0] == 0x63) {
priv->tuner = TUNER_RTL2830_MT2060;
rtl2830_config = &rtl28xxu_rtl2830_mt2060_config;
deb_info("%s: MT2060\n", __func__);
dev_dbg(&d->udev->dev, "%s: MT2060\n", __func__);
goto found;
} else {
deb_info("%s: MT2060 probe failed=%d - %02x\n",
dev_dbg(&d->udev->dev, "%s: MT2060 probe failed=%d - %02x\n",
__func__, ret, buf[0]);
}
......@@ -367,21 +363,21 @@ static int rtl2831u_frontend_attach(struct dvb_usb_adapter *adap)
ret = 0;
priv->tuner = TUNER_RTL2830_MXL5005S;
rtl2830_config = &rtl28xxu_rtl2830_mxl5005s_config;
deb_info("%s: MXL5005S\n", __func__);
dev_dbg(&d->udev->dev, "%s: MXL5005S\n", __func__);
goto found;
found:
/* attach demodulator */
adap->fe_adap[0].fe = dvb_attach(rtl2830_attach, rtl2830_config,
&adap->dev->i2c_adap);
if (adap->fe_adap[0].fe == NULL) {
adap->fe[0] = dvb_attach(rtl2830_attach, rtl2830_config,
&d->i2c_adap);
if (adap->fe[0] == NULL) {
ret = -ENODEV;
goto err;
}
return ret;
err:
deb_info("%s: failed=%d\n", __func__, ret);
dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
......@@ -405,7 +401,8 @@ static int rtl2832u_fc0012_tuner_callback(struct dvb_usb_device *d,
int ret;
u8 val;
deb_info("%s cmd=%d arg=%d\n", __func__, cmd, arg);
dev_dbg(&d->udev->dev, "%s: cmd=%d arg=%d\n", __func__, cmd, arg);
switch (cmd) {
case FC_FE_CALLBACK_VHF_ENABLE:
/* set output values */
......@@ -430,8 +427,7 @@ static int rtl2832u_fc0012_tuner_callback(struct dvb_usb_device *d,
return 0;
err:
err("%s: failed=%d\n", __func__, ret);
dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
......@@ -476,15 +472,12 @@ static int rtl2832u_frontend_callback(void *adapter_priv, int component,
return -EINVAL;
}
static int rtl2832u_frontend_attach(struct dvb_usb_adapter *adap)
{
int ret;
struct rtl28xxu_priv *priv = adap->dev->priv;
struct dvb_usb_device *d = adap_to_d(adap);
struct rtl28xxu_priv *priv = d_to_priv(d);
struct rtl2832_config *rtl2832_config;
u8 buf[2], val;
/* open RTL2832U/RTL2832 I2C gate */
struct rtl28xxu_req req_gate_open = {0x0120, 0x0011, 0x0001, "\x18"};
......@@ -511,167 +504,173 @@ static int rtl2832u_frontend_attach(struct dvb_usb_adapter *adap)
/* for TDA18272 tuner probe */
struct rtl28xxu_req req_tda18272 = {0x00c0, CMD_I2C_RD, 2, buf};
deb_info("%s:\n", __func__);
dev_dbg(&d->udev->dev, "%s:\n", __func__);
ret = rtl28xx_rd_reg(adap->dev, SYS_GPIO_DIR, &val);
ret = rtl28xx_rd_reg(d, SYS_GPIO_DIR, &val);
if (ret)
goto err;
val &= 0xbf;
ret = rtl28xx_wr_reg(adap->dev, SYS_GPIO_DIR, val);
ret = rtl28xx_wr_reg(d, SYS_GPIO_DIR, val);
if (ret)
goto err;
/* enable as output GPIO3 and GPIO6*/
ret = rtl28xx_rd_reg(adap->dev, SYS_GPIO_OUT_EN, &val);
ret = rtl28xx_rd_reg(d, SYS_GPIO_OUT_EN, &val);
if (ret)
goto err;
val |= 0x48;
ret = rtl28xx_wr_reg(adap->dev, SYS_GPIO_OUT_EN, val);
ret = rtl28xx_wr_reg(d, SYS_GPIO_OUT_EN, val);
if (ret)
goto err;
/*
* Probe used tuner. We need to know used tuner before demod attach
* since there is some demod params needed to set according to tuner.
*/
/* open demod I2C gate */
ret = rtl28xxu_ctrl_msg(adap->dev, &req_gate_open);
ret = rtl28xxu_ctrl_msg(d, &req_gate_open);
if (ret)
goto err;
priv->tuner = TUNER_NONE;
/* check FC0012 ID register; reg=00 val=a1 */
ret = rtl28xxu_ctrl_msg(adap->dev, &req_fc0012);
ret = rtl28xxu_ctrl_msg(d, &req_fc0012);
if (ret == 0 && buf[0] == 0xa1) {
priv->tuner = TUNER_RTL2832_FC0012;
rtl2832_config = &rtl28xxu_rtl2832_fc0012_config;
info("%s: FC0012 tuner found", __func__);
dev_info(&d->udev->dev, "%s: FC0012 tuner found",
KBUILD_MODNAME);
goto found;
}
/* check FC0013 ID register; reg=00 val=a3 */
ret = rtl28xxu_ctrl_msg(adap->dev, &req_fc0013);
ret = rtl28xxu_ctrl_msg(d, &req_fc0013);
if (ret == 0 && buf[0] == 0xa3) {
priv->tuner = TUNER_RTL2832_FC0013;
rtl2832_config = &rtl28xxu_rtl2832_fc0013_config;
info("%s: FC0013 tuner found", __func__);
dev_info(&d->udev->dev, "%s: FC0013 tuner found",
KBUILD_MODNAME);
goto found;
}
/* check MT2266 ID register; reg=00 val=85 */
ret = rtl28xxu_ctrl_msg(adap->dev, &req_mt2266);
ret = rtl28xxu_ctrl_msg(d, &req_mt2266);
if (ret == 0 && buf[0] == 0x85) {
priv->tuner = TUNER_RTL2832_MT2266;
/* TODO implement tuner */
info("%s: MT2266 tuner found", __func__);
dev_info(&d->udev->dev, "%s: MT2266 tuner found",
KBUILD_MODNAME);
goto unsupported;
}
/* check FC2580 ID register; reg=01 val=56 */
ret = rtl28xxu_ctrl_msg(adap->dev, &req_fc2580);
ret = rtl28xxu_ctrl_msg(d, &req_fc2580);
if (ret == 0 && buf[0] == 0x56) {
priv->tuner = TUNER_RTL2832_FC2580;
/* TODO implement tuner */
info("%s: FC2580 tuner found", __func__);
dev_info(&d->udev->dev, "%s: FC2580 tuner found",
KBUILD_MODNAME);
goto unsupported;
}
/* check MT2063 ID register; reg=00 val=9e || 9c */
ret = rtl28xxu_ctrl_msg(adap->dev, &req_mt2063);
ret = rtl28xxu_ctrl_msg(d, &req_mt2063);
if (ret == 0 && (buf[0] == 0x9e || buf[0] == 0x9c)) {
priv->tuner = TUNER_RTL2832_MT2063;
/* TODO implement tuner */
info("%s: MT2063 tuner found", __func__);
dev_info(&d->udev->dev, "%s: MT2063 tuner found",
KBUILD_MODNAME);
goto unsupported;
}
/* check MAX3543 ID register; reg=00 val=38 */
ret = rtl28xxu_ctrl_msg(adap->dev, &req_max3543);
ret = rtl28xxu_ctrl_msg(d, &req_max3543);
if (ret == 0 && buf[0] == 0x38) {
priv->tuner = TUNER_RTL2832_MAX3543;
/* TODO implement tuner */
info("%s: MAX3534 tuner found", __func__);
dev_info(&d->udev->dev, "%s: MAX3534 tuner found",
KBUILD_MODNAME);
goto unsupported;
}
/* check TUA9001 ID register; reg=7e val=2328 */
ret = rtl28xxu_ctrl_msg(adap->dev, &req_tua9001);
ret = rtl28xxu_ctrl_msg(d, &req_tua9001);
if (ret == 0 && buf[0] == 0x23 && buf[1] == 0x28) {
priv->tuner = TUNER_RTL2832_TUA9001;
/* TODO implement tuner */
info("%s: TUA9001 tuner found", __func__);
dev_info(&d->udev->dev, "%s: TUA9001 tuner found",
KBUILD_MODNAME);
goto unsupported;
}
/* check MXL5007R ID register; reg=d9 val=14 */
ret = rtl28xxu_ctrl_msg(adap->dev, &req_mxl5007t);
ret = rtl28xxu_ctrl_msg(d, &req_mxl5007t);
if (ret == 0 && buf[0] == 0x14) {
priv->tuner = TUNER_RTL2832_MXL5007T;
/* TODO implement tuner */
info("%s: MXL5007T tuner found", __func__);
dev_info(&d->udev->dev, "%s: MXL5007T tuner found",
KBUILD_MODNAME);
goto unsupported;
}
/* check E4000 ID register; reg=02 val=40 */
ret = rtl28xxu_ctrl_msg(adap->dev, &req_e4000);
ret = rtl28xxu_ctrl_msg(d, &req_e4000);
if (ret == 0 && buf[0] == 0x40) {
priv->tuner = TUNER_RTL2832_E4000;
/* TODO implement tuner */
info("%s: E4000 tuner found", __func__);
dev_info(&d->udev->dev, "%s: E4000 tuner found",
KBUILD_MODNAME);
goto unsupported;
}
/* check TDA18272 ID register; reg=00 val=c760 */
ret = rtl28xxu_ctrl_msg(adap->dev, &req_tda18272);
ret = rtl28xxu_ctrl_msg(d, &req_tda18272);
if (ret == 0 && (buf[0] == 0xc7 || buf[1] == 0x60)) {
priv->tuner = TUNER_RTL2832_TDA18272;
/* TODO implement tuner */
info("%s: TDA18272 tuner found", __func__);
dev_info(&d->udev->dev, "%s: TDA18272 tuner found",
KBUILD_MODNAME);
goto unsupported;
}
unsupported:
/* close demod I2C gate */
ret = rtl28xxu_ctrl_msg(adap->dev, &req_gate_close);
ret = rtl28xxu_ctrl_msg(d, &req_gate_close);
if (ret)
goto err;
/* tuner not found */
deb_info("No compatible tuner found");
dev_dbg(&d->udev->dev, "%s: No compatible tuner found\n", __func__);
ret = -ENODEV;
return ret;
found:
/* close demod I2C gate */
ret = rtl28xxu_ctrl_msg(adap->dev, &req_gate_close);
ret = rtl28xxu_ctrl_msg(d, &req_gate_close);
if (ret)
goto err;
/* attach demodulator */
adap->fe_adap[0].fe = dvb_attach(rtl2832_attach, rtl2832_config,
&adap->dev->i2c_adap);
if (adap->fe_adap[0].fe == NULL) {
adap->fe[0] = dvb_attach(rtl2832_attach, rtl2832_config,
&d->i2c_adap);
if (adap->fe[0] == NULL) {
ret = -ENODEV;
goto err;
}
/* set fe callbacks */
adap->fe_adap[0].fe->callback = rtl2832u_frontend_callback;
adap->fe[0]->callback = rtl2832u_frontend_callback;
return ret;
err:
deb_info("%s: failed=%d\n", __func__, ret);
dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
......@@ -704,32 +703,34 @@ static struct mxl5005s_config rtl28xxu_mxl5005s_config = {
static int rtl2831u_tuner_attach(struct dvb_usb_adapter *adap)
{
int ret;
struct rtl28xxu_priv *priv = adap->dev->priv;
struct dvb_usb_device *d = adap_to_d(adap);
struct rtl28xxu_priv *priv = d_to_priv(d);
struct i2c_adapter *rtl2830_tuner_i2c;
struct dvb_frontend *fe;
deb_info("%s:\n", __func__);
dev_dbg(&d->udev->dev, "%s:\n", __func__);
/* use rtl2830 driver I2C adapter, for more info see rtl2830 driver */
rtl2830_tuner_i2c = rtl2830_get_tuner_i2c_adapter(adap->fe_adap[0].fe);
rtl2830_tuner_i2c = rtl2830_get_tuner_i2c_adapter(adap->fe[0]);
switch (priv->tuner) {
case TUNER_RTL2830_QT1010:
fe = dvb_attach(qt1010_attach, adap->fe_adap[0].fe,
fe = dvb_attach(qt1010_attach, adap->fe[0],
rtl2830_tuner_i2c, &rtl28xxu_qt1010_config);
break;
case TUNER_RTL2830_MT2060:
fe = dvb_attach(mt2060_attach, adap->fe_adap[0].fe,
fe = dvb_attach(mt2060_attach, adap->fe[0],
rtl2830_tuner_i2c, &rtl28xxu_mt2060_config,
1220);
break;
case TUNER_RTL2830_MXL5005S:
fe = dvb_attach(mxl5005s_attach, adap->fe_adap[0].fe,
fe = dvb_attach(mxl5005s_attach, adap->fe[0],
rtl2830_tuner_i2c, &rtl28xxu_mxl5005s_config);
break;
default:
fe = NULL;
err("unknown tuner=%d", priv->tuner);
dev_err(&d->udev->dev, "%s: unknown tuner=%d\n", KBUILD_MODNAME,
priv->tuner);
}
if (fe == NULL) {
......@@ -739,40 +740,42 @@ static int rtl2831u_tuner_attach(struct dvb_usb_adapter *adap)
return 0;
err:
deb_info("%s: failed=%d\n", __func__, ret);
dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
static int rtl2832u_tuner_attach(struct dvb_usb_adapter *adap)
{
int ret;
struct rtl28xxu_priv *priv = adap->dev->priv;
struct dvb_usb_device *d = adap_to_d(adap);
struct rtl28xxu_priv *priv = d_to_priv(d);
struct dvb_frontend *fe;
deb_info("%s:\n", __func__);
dev_dbg(&d->udev->dev, "%s:\n", __func__);
switch (priv->tuner) {
case TUNER_RTL2832_FC0012:
fe = dvb_attach(fc0012_attach, adap->fe_adap[0].fe,
&adap->dev->i2c_adap, 0xc6>>1, 0, FC_XTAL_28_8_MHZ);
fe = dvb_attach(fc0012_attach, adap->fe[0],
&d->i2c_adap, 0xc6>>1, 0, FC_XTAL_28_8_MHZ);
/* since fc0012 includs reading the signal strength delegate
* that to the tuner driver */
adap->fe_adap[0].fe->ops.read_signal_strength = adap->fe_adap[0].
fe->ops.tuner_ops.get_rf_strength;
adap->fe[0]->ops.read_signal_strength =
adap->fe[0]->ops.tuner_ops.get_rf_strength;
return 0;
break;
case TUNER_RTL2832_FC0013:
fe = dvb_attach(fc0013_attach, adap->fe_adap[0].fe,
&adap->dev->i2c_adap, 0xc6>>1, 0, FC_XTAL_28_8_MHZ);
fe = dvb_attach(fc0013_attach, adap->fe[0],
&d->i2c_adap, 0xc6>>1, 0, FC_XTAL_28_8_MHZ);
/* fc0013 also supports signal strength reading */
adap->fe_adap[0].fe->ops.read_signal_strength = adap->fe_adap[0]
.fe->ops.tuner_ops.get_rf_strength;
adap->fe[0]->ops.read_signal_strength =
adap->fe[0]->ops.tuner_ops.get_rf_strength;
return 0;
default:
fe = NULL;
err("unknown tuner=%d", priv->tuner);
dev_err(&d->udev->dev, "%s: unknown tuner=%d\n", KBUILD_MODNAME,
priv->tuner);
}
if (fe == NULL) {
......@@ -782,18 +785,53 @@ static int rtl2832u_tuner_attach(struct dvb_usb_adapter *adap)
return 0;
err:
deb_info("%s: failed=%d\n", __func__, ret);
dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
static int rtl2831u_streaming_ctrl(struct dvb_usb_adapter *adap , int onoff)
static int rtl28xxu_init(struct dvb_usb_device *d)
{
int ret;
u8 val;
dev_dbg(&d->udev->dev, "%s:\n", __func__);
/* init USB endpoints */
ret = rtl28xx_rd_reg(d, USB_SYSCTL_0, &val);
if (ret)
goto err;
/* enable DMA and Full Packet Mode*/
val |= 0x09;
ret = rtl28xx_wr_reg(d, USB_SYSCTL_0, val);
if (ret)
goto err;
/* set EPA maximum packet size to 0x0200 */
ret = rtl28xx_wr_regs(d, USB_EPA_MAXPKT, "\x00\x02\x00\x00", 4);
if (ret)
goto err;
/* change EPA FIFO length */
ret = rtl28xx_wr_regs(d, USB_EPA_FIFO_CFG, "\x14\x00\x00\x00", 4);
if (ret)
goto err;
return ret;
err:
dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
static int rtl2831u_streaming_ctrl(struct dvb_frontend *fe , int onoff)
{
int ret;
u8 buf[2], gpio;
struct dvb_usb_device *d = fe_to_d(fe);
deb_info("%s: onoff=%d\n", __func__, onoff);
dev_dbg(&d->udev->dev, "%s: onoff=%d\n", __func__, onoff);
ret = rtl28xx_rd_reg(adap->dev, SYS_GPIO_OUT_VAL, &gpio);
ret = rtl28xx_rd_reg(d, SYS_GPIO_OUT_VAL, &gpio);
if (ret)
goto err;
......@@ -807,27 +845,27 @@ static int rtl2831u_streaming_ctrl(struct dvb_usb_adapter *adap , int onoff)
gpio &= (~0x04); /* LED off */
}
ret = rtl28xx_wr_reg(adap->dev, SYS_GPIO_OUT_VAL, gpio);
ret = rtl28xx_wr_reg(d, SYS_GPIO_OUT_VAL, gpio);
if (ret)
goto err;
ret = rtl28xx_wr_regs(adap->dev, USB_EPA_CTL, buf, 2);
ret = rtl28xx_wr_regs(d, USB_EPA_CTL, buf, 2);
if (ret)
goto err;
return ret;
err:
deb_info("%s: failed=%d\n", __func__, ret);
dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
static int rtl2832u_streaming_ctrl(struct dvb_usb_adapter *adap , int onoff)
static int rtl2832u_streaming_ctrl(struct dvb_frontend *fe , int onoff)
{
int ret;
u8 buf[2];
struct dvb_usb_device *d = fe_to_d(fe);
deb_info("%s: onoff=%d\n", __func__, onoff);
dev_dbg(&d->udev->dev, "%s: onoff=%d\n", __func__, onoff);
if (onoff) {
buf[0] = 0x00;
......@@ -837,13 +875,13 @@ static int rtl2832u_streaming_ctrl(struct dvb_usb_adapter *adap , int onoff)
buf[1] = 0x02; /* reset EPA */
}
ret = rtl28xx_wr_regs(adap->dev, USB_EPA_CTL, buf, 2);
ret = rtl28xx_wr_regs(d, USB_EPA_CTL, buf, 2);
if (ret)
goto err;
return ret;
err:
deb_info("%s: failed=%d\n", __func__, ret);
dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
......@@ -852,7 +890,7 @@ static int rtl2831u_power_ctrl(struct dvb_usb_device *d, int onoff)
int ret;
u8 gpio, sys0;
deb_info("%s: onoff=%d\n", __func__, onoff);
dev_dbg(&d->udev->dev, "%s: onoff=%d\n", __func__, onoff);
/* demod adc */
ret = rtl28xx_rd_reg(d, SYS_SYS0, &sys0);
......@@ -864,7 +902,8 @@ static int rtl2831u_power_ctrl(struct dvb_usb_device *d, int onoff)
if (ret)
goto err;
deb_info("%s: RD SYS0=%02x GPIO_OUT_VAL=%02x\n", __func__, sys0, gpio);
dev_dbg(&d->udev->dev, "%s: RD SYS0=%02x GPIO_OUT_VAL=%02x\n", __func__,
sys0, gpio);
if (onoff) {
gpio |= 0x01; /* GPIO0 = 1 */
......@@ -877,7 +916,8 @@ static int rtl2831u_power_ctrl(struct dvb_usb_device *d, int onoff)
sys0 = sys0 & (~0xc0);
}
deb_info("%s: WR SYS0=%02x GPIO_OUT_VAL=%02x\n", __func__, sys0, gpio);
dev_dbg(&d->udev->dev, "%s: WR SYS0=%02x GPIO_OUT_VAL=%02x\n", __func__,
sys0, gpio);
/* demod adc */
ret = rtl28xx_wr_reg(d, SYS_SYS0, sys0);
......@@ -891,7 +931,7 @@ static int rtl2831u_power_ctrl(struct dvb_usb_device *d, int onoff)
return ret;
err:
deb_info("%s: failed=%d\n", __func__, ret);
dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
......@@ -900,7 +940,7 @@ static int rtl2832u_power_ctrl(struct dvb_usb_device *d, int onoff)
int ret;
u8 val;
deb_info("%s: onoff=%d\n", __func__, onoff);
dev_dbg(&d->udev->dev, "%s: onoff=%d\n", __func__, onoff);
if (onoff) {
/* set output values */
......@@ -1012,7 +1052,7 @@ static int rtl2832u_power_ctrl(struct dvb_usb_device *d, int onoff)
return ret;
err:
deb_info("%s: failed=%d\n", __func__, ret);
dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
......@@ -1085,10 +1125,21 @@ static int rtl2831u_rc_query(struct dvb_usb_device *d)
return ret;
err:
deb_info("%s: failed=%d\n", __func__, ret);
dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
static int rtl2831u_get_rc_config(struct dvb_usb_device *d,
struct dvb_usb_rc *rc)
{
rc->map_name = RC_MAP_EMPTY;
rc->allowed_protos = RC_TYPE_NEC;
rc->query = rtl2831u_rc_query;
rc->interval = 400;
return 0;
}
static int rtl2832u_rc_query(struct dvb_usb_device *d)
{
int ret, i;
......@@ -1146,281 +1197,95 @@ static int rtl2832u_rc_query(struct dvb_usb_device *d)
exit:
return ret;
err:
deb_info("%s: failed=%d\n", __func__, ret);
dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
enum rtl28xxu_usb_table_entry {
RTL2831U_0BDA_2831,
RTL2831U_14AA_0160,
RTL2831U_14AA_0161,
RTL2832U_0CCD_00A9,
RTL2832U_1F4D_B803,
RTL2832U_0CCD_00B3,
};
static struct usb_device_id rtl28xxu_table[] = {
/* RTL2831U */
[RTL2831U_0BDA_2831] = {
USB_DEVICE(USB_VID_REALTEK, USB_PID_REALTEK_RTL2831U)},
[RTL2831U_14AA_0160] = {
USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_FREECOM_DVBT)},
[RTL2831U_14AA_0161] = {
USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_FREECOM_DVBT_2)},
/* RTL2832U */
[RTL2832U_0CCD_00A9] = {
USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_STICK_BLACK_REV1)},
[RTL2832U_1F4D_B803] = {
USB_DEVICE(USB_VID_GTEK, USB_PID_DELOCK_USB2_DVBT)},
[RTL2832U_0CCD_00B3] = {
USB_DEVICE(USB_VID_TERRATEC, USB_PID_NOXON_DAB_STICK)},
{} /* terminating entry */
};
MODULE_DEVICE_TABLE(usb, rtl28xxu_table);
static struct dvb_usb_device_properties rtl28xxu_properties[] = {
{
.caps = DVB_USB_IS_AN_I2C_ADAPTER,
static int rtl2832u_get_rc_config(struct dvb_usb_device *d,
struct dvb_usb_rc *rc)
{
rc->map_name = RC_MAP_EMPTY;
rc->allowed_protos = RC_TYPE_NEC;
rc->query = rtl2832u_rc_query;
rc->interval = 400;
.usb_ctrl = DEVICE_SPECIFIC,
.no_reconnect = 1,
return 0;
}
static const struct dvb_usb_device_properties rtl2831u_props = {
.driver_name = KBUILD_MODNAME,
.owner = THIS_MODULE,
.adapter_nr = adapter_nr,
.size_of_priv = sizeof(struct rtl28xxu_priv),
.num_adapters = 1,
.adapter = {
{
.num_frontends = 1,
.fe = {
{
.power_ctrl = rtl2831u_power_ctrl,
.i2c_algo = &rtl28xxu_i2c_algo,
.frontend_attach = rtl2831u_frontend_attach,
.tuner_attach = rtl2831u_tuner_attach,
.init = rtl28xxu_init,
.get_rc_config = rtl2831u_get_rc_config,
.streaming_ctrl = rtl2831u_streaming_ctrl,
.stream = {
.type = USB_BULK,
.count = 6,
.endpoint = 0x81,
.u = {
.bulk = {
.buffersize = 8*512,
}
}
}
}
}
}
},
.power_ctrl = rtl2831u_power_ctrl,
.rc.core = {
.protocol = RC_TYPE_NEC,
.module_name = "rtl28xxu",
.rc_query = rtl2831u_rc_query,
.rc_interval = 400,
.allowed_protos = RC_TYPE_NEC,
.rc_codes = RC_MAP_EMPTY,
},
.i2c_algo = &rtl28xxu_i2c_algo,
.num_device_descs = 2,
.devices = {
{
.name = "Realtek RTL2831U reference design",
.warm_ids = {
&rtl28xxu_table[RTL2831U_0BDA_2831],
},
},
.num_adapters = 1,
.adapter = {
{
.name = "Freecom USB2.0 DVB-T",
.warm_ids = {
&rtl28xxu_table[RTL2831U_14AA_0160],
&rtl28xxu_table[RTL2831U_14AA_0161],
},
.stream = DVB_USB_STREAM_BULK(0x81, 6, 8 * 512),
},
}
},
{
.caps = DVB_USB_IS_AN_I2C_ADAPTER,
.usb_ctrl = DEVICE_SPECIFIC,
.no_reconnect = 1,
};
static const struct dvb_usb_device_properties rtl2832u_props = {
.driver_name = KBUILD_MODNAME,
.owner = THIS_MODULE,
.adapter_nr = adapter_nr,
.size_of_priv = sizeof(struct rtl28xxu_priv),
.num_adapters = 1,
.adapter = {
{
.num_frontends = 1,
.fe = {
{
.power_ctrl = rtl2832u_power_ctrl,
.i2c_algo = &rtl28xxu_i2c_algo,
.frontend_attach = rtl2832u_frontend_attach,
.tuner_attach = rtl2832u_tuner_attach,
.init = rtl28xxu_init,
.get_rc_config = rtl2832u_get_rc_config,
.streaming_ctrl = rtl2832u_streaming_ctrl,
.stream = {
.type = USB_BULK,
.count = 6,
.endpoint = 0x81,
.u = {
.bulk = {
.buffersize = 8*512,
}
}
}
}
}
}
},
.power_ctrl = rtl2832u_power_ctrl,
.rc.core = {
.protocol = RC_TYPE_NEC,
.module_name = "rtl28xxu",
.rc_query = rtl2832u_rc_query,
.rc_interval = 400,
.allowed_protos = RC_TYPE_NEC,
.rc_codes = RC_MAP_EMPTY,
},
.i2c_algo = &rtl28xxu_i2c_algo,
.num_device_descs = 3,
.devices = {
{
.name = "Terratec Cinergy T Stick Black",
.warm_ids = {
&rtl28xxu_table[RTL2832U_0CCD_00A9],
},
},
{
.name = "G-Tek Electronics Group Lifeview LV5TDLX DVB-T",
.warm_ids = {
&rtl28xxu_table[RTL2832U_1F4D_B803],
},
},
.num_adapters = 1,
.adapter = {
{
.name = "NOXON DAB/DAB+ USB dongle",
.warm_ids = {
&rtl28xxu_table[RTL2832U_0CCD_00B3],
},
.stream = DVB_USB_STREAM_BULK(0x81, 6, 8 * 512),
},
}
},
};
static int rtl28xxu_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
int ret, i;
u8 val;
int properties_count = ARRAY_SIZE(rtl28xxu_properties);
struct dvb_usb_device *d;
struct usb_device *udev;
bool found;
deb_info("%s: interface=%d\n", __func__,
intf->cur_altsetting->desc.bInterfaceNumber);
if (intf->cur_altsetting->desc.bInterfaceNumber != 0)
return 0;
/* Dynamic USB ID support. Replaces first device ID with current one .*/
udev = interface_to_usbdev(intf);
for (i = 0, found = false; i < ARRAY_SIZE(rtl28xxu_table) - 1; i++) {
if (rtl28xxu_table[i].idVendor ==
le16_to_cpu(udev->descriptor.idVendor) &&
rtl28xxu_table[i].idProduct ==
le16_to_cpu(udev->descriptor.idProduct)) {
found = true;
break;
}
}
if (!found) {
deb_info("%s: using dynamic ID %04x:%04x\n", __func__,
le16_to_cpu(udev->descriptor.idVendor),
le16_to_cpu(udev->descriptor.idProduct));
rtl28xxu_properties[0].devices[0].warm_ids[0]->idVendor =
le16_to_cpu(udev->descriptor.idVendor);
rtl28xxu_properties[0].devices[0].warm_ids[0]->idProduct =
le16_to_cpu(udev->descriptor.idProduct);
}
for (i = 0; i < properties_count; i++) {
ret = dvb_usb_device_init(intf, &rtl28xxu_properties[i],
THIS_MODULE, &d, adapter_nr);
if (ret == 0 || ret != -ENODEV)
break;
}
if (ret)
goto err;
/* init USB endpoints */
ret = rtl28xx_rd_reg(d, USB_SYSCTL_0, &val);
if (ret)
goto err;
/* enable DMA and Full Packet Mode*/
val |= 0x09;
ret = rtl28xx_wr_reg(d, USB_SYSCTL_0, val);
if (ret)
goto err;
/* set EPA maximum packet size to 0x0200 */
ret = rtl28xx_wr_regs(d, USB_EPA_MAXPKT, "\x00\x02\x00\x00", 4);
if (ret)
goto err;
/* change EPA FIFO length */
ret = rtl28xx_wr_regs(d, USB_EPA_FIFO_CFG, "\x14\x00\x00\x00", 4);
if (ret)
goto err;
return ret;
err:
deb_info("%s: failed=%d\n", __func__, ret);
return ret;
}
static struct usb_driver rtl28xxu_driver = {
.name = "dvb_usb_rtl28xxu",
.probe = rtl28xxu_probe,
.disconnect = dvb_usb_device_exit,
.id_table = rtl28xxu_table,
static const struct usb_device_id rtl28xxu_id_table[] = {
{ DVB_USB_DEVICE(USB_VID_REALTEK, USB_PID_REALTEK_RTL2831U,
&rtl2831u_props, "Realtek RTL2831U reference design", NULL) },
{ DVB_USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_FREECOM_DVBT,
&rtl2831u_props, "Freecom USB2.0 DVB-T", NULL) },
{ DVB_USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_FREECOM_DVBT_2,
&rtl2831u_props, "Freecom USB2.0 DVB-T", NULL) },
{ DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_STICK_BLACK_REV1,
&rtl2832u_props, "Terratec Cinergy T Stick Black", NULL) },
{ DVB_USB_DEVICE(USB_VID_GTEK, USB_PID_DELOCK_USB2_DVBT,
&rtl2832u_props, "G-Tek Electronics Group Lifeview LV5TDLX DVB-T", NULL) },
{ DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_NOXON_DAB_STICK,
&rtl2832u_props, "NOXON DAB/DAB+ USB dongle", NULL) },
{ }
};
MODULE_DEVICE_TABLE(usb, rtl28xxu_id_table);
static struct usb_driver rtl28xxu_usb_driver = {
.name = KBUILD_MODNAME,
.id_table = rtl28xxu_id_table,
.probe = dvb_usbv2_probe,
.disconnect = dvb_usbv2_disconnect,
.suspend = dvb_usbv2_suspend,
.resume = dvb_usbv2_resume,
.no_dynamic_id = 1,
.soft_unbind = 1,
};
/* module stuff */
static int __init rtl28xxu_module_init(void)
{
int ret;
deb_info("%s:\n", __func__);
ret = usb_register(&rtl28xxu_driver);
if (ret)
err("usb_register failed=%d", ret);
return ret;
}
static void __exit rtl28xxu_module_exit(void)
{
deb_info("%s:\n", __func__);
/* deregister this driver from the USB subsystem */
usb_deregister(&rtl28xxu_driver);
}
module_init(rtl28xxu_module_init);
module_exit(rtl28xxu_module_exit);
module_usb_driver(rtl28xxu_usb_driver);
MODULE_DESCRIPTION("Realtek RTL28xxU DVB USB driver");
MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
......
drivers/media/dvb/dvb-usb/rtl28xxu.h → drivers/media/dvb/dvb-usb-v2/rtl28xxu.h
View file @ c01a3595
......@@ -22,27 +22,17 @@
#ifndef RTL28XXU_H
#define RTL28XXU_H
#define DVB_USB_LOG_PREFIX "rtl28xxu"
#include "dvb-usb.h"
#include "dvb_usb.h"
#define deb_info(args...) dprintk(dvb_usb_rtl28xxu_debug, 0x01, args)
#define deb_rc(args...) dprintk(dvb_usb_rtl28xxu_debug, 0x02, args)
#define deb_xfer(args...) dprintk(dvb_usb_rtl28xxu_debug, 0x04, args)
#define deb_reg(args...) dprintk(dvb_usb_rtl28xxu_debug, 0x08, args)
#define deb_i2c(args...) dprintk(dvb_usb_rtl28xxu_debug, 0x10, args)
#define deb_fw(args...) dprintk(dvb_usb_rtl28xxu_debug, 0x20, args)
#define deb_dump(r, t, v, i, b, l, func) { \
int loop_; \
func("%02x %02x %02x %02x %02x %02x %02x %02x", \
t, r, v & 0xff, v >> 8, i & 0xff, i >> 8, l & 0xff, l >> 8); \
#define deb_dump(r, t, v, i, b, l) { \
char *direction; \
if (t == (USB_TYPE_VENDOR | USB_DIR_OUT)) \
func(" >>> "); \
direction = ">>>"; \
else \
func(" <<< "); \
for (loop_ = 0; loop_ < l; loop_++) \
func("%02x ", b[loop_]); \
func("\n");\
direction = "<<<"; \
dev_dbg(&d->udev->dev, "%s: %02x %02x %02x %02x %02x %02x %02x %02x " \
"%s [%d bytes]\n", __func__, t, r, v & 0xff, v >> 8, \
i & 0xff, i >> 8, l & 0xff, l >> 8, direction, l); \
}
/*
......
drivers/media/dvb/dvb-usb/Kconfig
View file @ c01a3595
......@@ -319,16 +319,3 @@ config DVB_USB_IT913X
help
Say Y here to support the it913x device
config DVB_USB_RTL28XXU
tristate "Realtek RTL28xxU DVB USB support"
depends on DVB_USB && EXPERIMENTAL
select DVB_RTL2830
select DVB_RTL2832
select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMISE
select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE
select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE
select MEDIA_TUNER_FC0012 if !MEDIA_TUNER_CUSTOMISE
select MEDIA_TUNER_FC0013 if !MEDIA_TUNER_CUSTOMISE
help
Say Y here to support the Realtek RTL28xxU DVB USB receiver.
drivers/media/dvb/dvb-usb/Makefile
View file @ c01a3595
......@@ -78,9 +78,6 @@ obj-$(CONFIG_DVB_USB_TECHNISAT_USB2) += dvb-usb-technisat-usb2.o
dvb-usb-it913x-objs := it913x.o
obj-$(CONFIG_DVB_USB_IT913X) += dvb-usb-it913x.o
dvb-usb-rtl28xxu-objs = rtl28xxu.o
obj-$(CONFIG_DVB_USB_RTL28XXU) += dvb-usb-rtl28xxu.o
ccflags-y += -I$(srctree)/drivers/media/dvb/dvb-core
ccflags-y += -I$(srctree)/drivers/media/dvb/frontends/
# due to tuner-xc3028
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7