arm64: split thread_info from task stack

This patch moves arm64's struct thread_info from the task stack into
task_struct. This protects thread_info from corruption in the case of
stack overflows, and makes its address harder to determine if stack
addresses are leaked, making a number of attacks more difficult. Precise
detection and handling of overflow is left for subsequent patches.

Largely, this involves changing code to store the task_struct in sp_el0,
and acquire the thread_info from the task struct. Core code now
implements current_thread_info(), and as noted in <linux/sched.h> this
relies on offsetof(task_struct, thread_info) == 0, enforced by core
code.

This change means that the 'tsk' register used in entry.S now points to
a task_struct, rather than a thread_info as it used to. To make this
clear, the TI_* field offsets are renamed to TSK_TI_*, with asm-offsets
appropriately updated to account for the structural change.

Userspace clobbers sp_el0, and we can no longer restore this from the
stack. Instead, the current task is cached in a per-cpu variable that we
can safely access from early assembly as interrupts are disabled (and we
are thus not preemptible).

Both secondary entry and idle are updated to stash the sp and task
pointer separately.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: James Morse <james.morse@arm.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

arch/arm64/Kconfig

@@ -109,6 +109,7 @@ config ARM64
 	select POWER_SUPPLY
 	select SPARSE_IRQ
 	select SYSCTL_EXCEPTION_TRACE
+	select THREAD_INFO_IN_TASK
 	help
 	  ARM 64-bit (AArch64) Linux support.
 

arch/arm64/include/asm/Kbuild

 generic-y += bugs.h
 generic-y += clkdev.h
 generic-y += cputime.h
-generic-y += current.h
 generic-y += delay.h
 generic-y += div64.h
 generic-y += dma.h

arch/arm64/include/asm/current.h

+#ifndef __ASM_CURRENT_H
+#define __ASM_CURRENT_H
+
+#include <linux/compiler.h>
+
+#include <asm/sysreg.h>
+
+#ifndef __ASSEMBLY__
+
+struct task_struct;
+
+static __always_inline struct task_struct *get_current(void)
+{
+	return (struct task_struct *)read_sysreg(sp_el0);
+}
+
+#define current get_current()
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ASM_CURRENT_H */
+

arch/arm64/include/asm/smp.h

@@ -82,6 +82,7 @@ asmlinkage void secondary_start_kernel(void);
  */
 struct secondary_data {
 	void *stack;
+	struct task_struct *task;
 	long status;
 };
 

arch/arm64/include/asm/thread_info.h

@@ -47,41 +47,17 @@ typedef unsigned long mm_segment_t;
 struct thread_info {
 	unsigned long		flags;		/* low level flags */
 	mm_segment_t		addr_limit;	/* address limit */
-	struct task_struct	*task;		/* main task structure */
 	int			preempt_count;	/* 0 => preemptable, <0 => bug */
-	int			cpu;		/* cpu */
 };
 
 #define INIT_THREAD_INFO(tsk)						\
 {									\
-	.task		= &tsk,						\
-	.flags		= 0,						\
 	.preempt_count	= INIT_PREEMPT_COUNT,				\
 	.addr_limit	= KERNEL_DS,					\
 }
 
 #define init_stack		(init_thread_union.stack)
 
-/*
- * how to get the thread information struct from C
- */
-static inline struct thread_info *current_thread_info(void) __attribute_const__;
-
-/*
- * struct thread_info can be accessed directly via sp_el0.
- *
- * We don't use read_sysreg() as we want the compiler to cache the value where
- * possible.
- */
-static inline struct thread_info *current_thread_info(void)
-{
-	unsigned long sp_el0;
-
-	asm ("mrs %0, sp_el0" : "=r" (sp_el0));
-
-	return (struct thread_info *)sp_el0;
-}
-
 #define thread_saved_pc(tsk)	\
 	((unsigned long)(tsk->thread.cpu_context.pc))
 #define thread_saved_sp(tsk)	\

arch/arm64/kernel/asm-offsets.c

@@ -36,9 +36,10 @@ int main(void)
 {
   DEFINE(TSK_ACTIVE_MM,		offsetof(struct task_struct, active_mm));
   BLANK();
-  DEFINE(TI_FLAGS,		offsetof(struct thread_info, flags));
-  DEFINE(TI_PREEMPT,		offsetof(struct thread_info, preempt_count));
-  DEFINE(TI_ADDR_LIMIT,		offsetof(struct thread_info, addr_limit));
+  DEFINE(TSK_TI_FLAGS,		offsetof(struct task_struct, thread_info.flags));
+  DEFINE(TSK_TI_PREEMPT,	offsetof(struct task_struct, thread_info.preempt_count));
+  DEFINE(TSK_TI_ADDR_LIMIT,	offsetof(struct task_struct, thread_info.addr_limit));
+  DEFINE(TSK_STACK,		offsetof(struct task_struct, stack));
   BLANK();
   DEFINE(THREAD_CPU_CONTEXT,	offsetof(struct task_struct, thread.cpu_context));
   BLANK();
@@ -121,6 +122,7 @@ int main(void)
   DEFINE(TZ_DSTTIME,		offsetof(struct timezone, tz_dsttime));
   BLANK();
   DEFINE(CPU_BOOT_STACK,	offsetof(struct secondary_data, stack));
+  DEFINE(CPU_BOOT_TASK,		offsetof(struct secondary_data, task));
   BLANK();
 #ifdef CONFIG_KVM_ARM_HOST
   DEFINE(VCPU_CONTEXT,		offsetof(struct kvm_vcpu, arch.ctxt));

arch/arm64/kernel/entry.S

@@ -90,9 +90,8 @@
 
 	.if	\el == 0
 	mrs	x21, sp_el0
-	mov	tsk, sp
-	and	tsk, tsk, #~(THREAD_SIZE - 1)	// Ensure MDSCR_EL1.SS is clear,
-	ldr	x19, [tsk, #TI_FLAGS]		// since we can unmask debug
+	ldr_this_cpu	tsk, __entry_task, x20	// Ensure MDSCR_EL1.SS is clear,
+	ldr	x19, [tsk, #TSK_TI_FLAGS]	// since we can unmask debug
 	disable_step_tsk x19, x20		// exceptions when scheduling.
 
 	mov	x29, xzr			// fp pointed to user-space
@@ -100,10 +99,10 @@
 	add	x21, sp, #S_FRAME_SIZE
 	get_thread_info tsk
 	/* Save the task's original addr_limit and set USER_DS (TASK_SIZE_64) */
-	ldr	x20, [tsk, #TI_ADDR_LIMIT]
+	ldr	x20, [tsk, #TSK_TI_ADDR_LIMIT]
 	str	x20, [sp, #S_ORIG_ADDR_LIMIT]
 	mov	x20, #TASK_SIZE_64
-	str	x20, [tsk, #TI_ADDR_LIMIT]
+	str	x20, [tsk, #TSK_TI_ADDR_LIMIT]
 	/* No need to reset PSTATE.UAO, hardware's already set it to 0 for us */
 	.endif /* \el == 0 */
 	mrs	x22, elr_el1
@@ -139,7 +138,7 @@
 	.if	\el != 0
 	/* Restore the task's original addr_limit. */
 	ldr	x20, [sp, #S_ORIG_ADDR_LIMIT]
-	str	x20, [tsk, #TI_ADDR_LIMIT]
+	str	x20, [tsk, #TSK_TI_ADDR_LIMIT]
 
 	/* No need to restore UAO, it will be restored from SPSR_EL1 */
 	.endif
@@ -192,13 +191,14 @@ alternative_else_nop_endif
 	mov	x19, sp			// preserve the original sp
 
 	/*
-	 * Compare sp with the current thread_info, if the top
-	 * ~(THREAD_SIZE - 1) bits match, we are on a task stack, and
-	 * should switch to the irq stack.
+	 * Compare sp with the base of the task stack.
+	 * If the top ~(THREAD_SIZE - 1) bits match, we are on a task stack,
+	 * and should switch to the irq stack.
 	 */
-	and	x25, x19, #~(THREAD_SIZE - 1)
-	cmp	x25, tsk
-	b.ne	9998f
+	ldr	x25, [tsk, TSK_STACK]
+	eor	x25, x25, x19
+	and	x25, x25, #~(THREAD_SIZE - 1)
+	cbnz	x25, 9998f
 
 	adr_this_cpu x25, irq_stack, x26
 	mov	x26, #IRQ_STACK_START_SP
@@ -427,9 +427,9 @@ el1_irq:
 	irq_handler
 
 #ifdef CONFIG_PREEMPT
-	ldr	w24, [tsk, #TI_PREEMPT]		// get preempt count
+	ldr	w24, [tsk, #TSK_TI_PREEMPT]	// get preempt count
 	cbnz	w24, 1f				// preempt count != 0
-	ldr	x0, [tsk, #TI_FLAGS]		// get flags
+	ldr	x0, [tsk, #TSK_TI_FLAGS]	// get flags
 	tbz	x0, #TIF_NEED_RESCHED, 1f	// needs rescheduling?
 	bl	el1_preempt
 1:
@@ -444,7 +444,7 @@ ENDPROC(el1_irq)
 el1_preempt:
 	mov	x24, lr
 1:	bl	preempt_schedule_irq		// irq en/disable is done inside
-	ldr	x0, [tsk, #TI_FLAGS]		// get new tasks TI_FLAGS
+	ldr	x0, [tsk, #TSK_TI_FLAGS]	// get new tasks TI_FLAGS
 	tbnz	x0, #TIF_NEED_RESCHED, 1b	// needs rescheduling?
 	ret	x24
 #endif
@@ -674,8 +674,7 @@ ENTRY(cpu_switch_to)
 	ldp	x29, x9, [x8], #16
 	ldr	lr, [x8]
 	mov	sp, x9
-	and	x9, x9, #~(THREAD_SIZE - 1)
-	msr	sp_el0, x9
+	msr	sp_el0, x1
 	ret
 ENDPROC(cpu_switch_to)
 
@@ -686,7 +685,7 @@ ENDPROC(cpu_switch_to)
 ret_fast_syscall:
 	disable_irq				// disable interrupts
 	str	x0, [sp, #S_X0]			// returned x0
-	ldr	x1, [tsk, #TI_FLAGS]		// re-check for syscall tracing
+	ldr	x1, [tsk, #TSK_TI_FLAGS]	// re-check for syscall tracing
 	and	x2, x1, #_TIF_SYSCALL_WORK
 	cbnz	x2, ret_fast_syscall_trace
 	and	x2, x1, #_TIF_WORK_MASK
@@ -706,14 +705,14 @@ work_pending:
 #ifdef CONFIG_TRACE_IRQFLAGS
 	bl	trace_hardirqs_on		// enabled while in userspace
 #endif
-	ldr	x1, [tsk, #TI_FLAGS]		// re-check for single-step
+	ldr	x1, [tsk, #TSK_TI_FLAGS]	// re-check for single-step
 	b	finish_ret_to_user
 /*
  * "slow" syscall return path.
  */
 ret_to_user:
 	disable_irq				// disable interrupts
-	ldr	x1, [tsk, #TI_FLAGS]
+	ldr	x1, [tsk, #TSK_TI_FLAGS]
 	and	x2, x1, #_TIF_WORK_MASK
 	cbnz	x2, work_pending
 finish_ret_to_user:
@@ -746,7 +745,7 @@ el0_svc_naked:					// compat entry point
 	enable_dbg_and_irq
 	ct_user_exit 1
 
-	ldr	x16, [tsk, #TI_FLAGS]		// check for syscall hooks
+	ldr	x16, [tsk, #TSK_TI_FLAGS]	// check for syscall hooks
 	tst	x16, #_TIF_SYSCALL_WORK
 	b.ne	__sys_trace
 	cmp     scno, sc_nr                     // check upper syscall limit

arch/arm64/kernel/head.S

@@ -428,7 +428,8 @@ ENDPROC(__create_page_tables)
 __primary_switched:
 	adrp	x4, init_thread_union
 	add	sp, x4, #THREAD_SIZE
-	msr	sp_el0, x4			// Save thread_info
+	adr_l	x5, init_task
+	msr	sp_el0, x5			// Save thread_info
 
 	adr_l	x8, vectors			// load VBAR_EL1 with virtual
 	msr	vbar_el1, x8			// vector table address
@@ -699,10 +700,10 @@ __secondary_switched:
 	isb
 
 	adr_l	x0, secondary_data
-	ldr	x0, [x0, #CPU_BOOT_STACK]	// get secondary_data.stack
-	mov	sp, x0
-	and	x0, x0, #~(THREAD_SIZE - 1)
-	msr	sp_el0, x0			// save thread_info
+	ldr	x1, [x0, #CPU_BOOT_STACK]	// get secondary_data.stack
+	mov	sp, x1
+	ldr	x2, [x0, #CPU_BOOT_TASK]
+	msr	sp_el0, x2
 	mov	x29, #0
 	b	secondary_start_kernel
 ENDPROC(__secondary_switched)

arch/arm64/kernel/process.c

@@ -45,6 +45,7 @@
 #include <linux/personality.h>
 #include <linux/notifier.h>
 #include <trace/events/power.h>
+#include <linux/percpu.h>
 
 #include <asm/alternative.h>
 #include <asm/compat.h>
@@ -321,6 +322,20 @@ void uao_thread_switch(struct task_struct *next)
 	}
 }
 
+/*
+ * We store our current task in sp_el0, which is clobbered by userspace. Keep a
+ * shadow copy so that we can restore this upon entry from userspace.
+ *
+ * This is *only* for exception entry from EL0, and is not valid until we
+ * __switch_to() a user task.
+ */
+DEFINE_PER_CPU(struct task_struct *, __entry_task);
+
+static void entry_task_switch(struct task_struct *next)
+{
+	__this_cpu_write(__entry_task, next);
+}
+
 /*
  * Thread switching.
  */
@@ -333,6 +348,7 @@ struct task_struct *__switch_to(struct task_struct *prev,
 	tls_thread_switch(next);
 	hw_breakpoint_thread_switch(next);
 	contextidr_thread_switch(next);
+	entry_task_switch(next);
 	uao_thread_switch(next);
 
 	/*

arch/arm64/kernel/smp.c

@@ -149,6 +149,7 @@ int __cpu_up(unsigned int cpu, struct task_struct *idle)
 	 * We need to tell the secondary core where to find its stack and the
 	 * page tables.
 	 */
+	secondary_data.task = idle;
 	secondary_data.stack = task_stack_page(idle) + THREAD_START_SP;
 	update_cpu_boot_status(CPU_MMU_OFF);
 	__flush_dcache_area(&secondary_data, sizeof(secondary_data));
@@ -173,6 +174,7 @@ int __cpu_up(unsigned int cpu, struct task_struct *idle)
 		pr_err("CPU%u: failed to boot: %d\n", cpu, ret);
 	}
 
+	secondary_data.task = NULL;
 	secondary_data.stack = NULL;
 	status = READ_ONCE(secondary_data.status);
 	if (ret && status) {