extcon: rt8973a: Add Richtek RT8973A extcon driver

This patch add support for Richtek RT8973A which is Micro USB Switch OVP
and i2c interface. The RT8973A is a USB port accessory detector and switch
that is optimized to protect low voltage system from abnormal high input
voltage (up to 28V) and supports high speed USB operation. Also, RT8973A
support 'auto-configuration' mode. If auto-configuration mode is enabled,
RT8973A would control internal h/w patch for USB D-/D+ switching.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>

drivers/extcon/Kconfig

@@ -70,6 +70,18 @@ config EXTCON_PALMAS
 	  Say Y here to enable support for USB peripheral and USB host
 	  detection by palmas usb.
 
+config EXTCON_RT8973A
+	tristate "RT8973A EXTCON support"
+	depends on I2C
+	select IRQ_DOMAIN
+	select REGMAP_I2C
+	select REGMAP_IRQ
+	help
+	  If you say yes here you get support for the MUIC device of
+	  Richtek RT8973A. The RT8973A is a USB port accessory detector
+	  and switch that is optimized to protect low voltage system
+	  from abnormal high input voltage (up to 28V).
+
 config EXTCON_SM5502
 	tristate "SM5502 EXTCON support"
 	depends on I2C

drivers/extcon/Makefile

@@ -10,4 +10,5 @@ obj-$(CONFIG_EXTCON_MAX14577)	+= extcon-max14577.o
 obj-$(CONFIG_EXTCON_MAX77693)	+= extcon-max77693.o
 obj-$(CONFIG_EXTCON_MAX8997)	+= extcon-max8997.o
 obj-$(CONFIG_EXTCON_PALMAS)	+= extcon-palmas.o
+obj-$(CONFIG_EXTCON_RT8973A)	+= extcon-rt8973a.o
 obj-$(CONFIG_EXTCON_SM5502)	+= extcon-sm5502.o

drivers/extcon/extcon-rt8973a.h

+/*
+ * rt8973a.h
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __LINUX_EXTCON_RT8973A_H
+#define __LINUX_EXTCON_RT8973A_H
+
+enum rt8973a_types {
+	TYPE_RT8973A,
+};
+
+/* RT8973A registers */
+enum rt8973A_reg {
+	RT8973A_REG_DEVICE_ID = 0x1,
+	RT8973A_REG_CONTROL1,
+	RT8973A_REG_INT1,
+	RT8973A_REG_INT2,
+	RT8973A_REG_INTM1,
+	RT8973A_REG_INTM2,
+	RT8973A_REG_ADC,
+	RT8973A_REG_RSVD_1,
+	RT8973A_REG_RSVD_2,
+	RT8973A_REG_DEV1,
+	RT8973A_REG_DEV2,
+	RT8973A_REG_RSVD_3,
+	RT8973A_REG_RSVD_4,
+	RT8973A_REG_RSVD_5,
+	RT8973A_REG_RSVD_6,
+	RT8973A_REG_RSVD_7,
+	RT8973A_REG_RSVD_8,
+	RT8973A_REG_RSVD_9,
+	RT8973A_REG_MANUAL_SW1,
+	RT8973A_REG_MANUAL_SW2,
+	RT8973A_REG_RSVD_10,
+	RT8973A_REG_RSVD_11,
+	RT8973A_REG_RSVD_12,
+	RT8973A_REG_RSVD_13,
+	RT8973A_REG_RSVD_14,
+	RT8973A_REG_RSVD_15,
+	RT8973A_REG_RESET,
+
+	RT8973A_REG_END,
+};
+
+/* Define RT8973A MASK/SHIFT constant */
+#define RT8973A_REG_DEVICE_ID_VENDOR_SHIFT	0
+#define RT8973A_REG_DEVICE_ID_VERSION_SHIFT	3
+#define RT8973A_REG_DEVICE_ID_VENDOR_MASK	(0x7 << RT8973A_REG_DEVICE_ID_VENDOR_SHIFT)
+#define RT8973A_REG_DEVICE_ID_VERSION_MASK	(0x1f << RT8973A_REG_DEVICE_ID_VERSION_SHIFT)
+
+#define RT8973A_REG_CONTROL1_INTM_SHIFT	0
+#define RT8973A_REG_CONTROL1_AUTO_CONFIG_SHIFT	2
+#define RT8973A_REG_CONTROL1_I2C_RST_EN_SHIFT	3
+#define RT8973A_REG_CONTROL1_SWITCH_OPEN_SHIFT	4
+#define RT8973A_REG_CONTROL1_CHGTYP_SHIFT	5
+#define RT8973A_REG_CONTROL1_USB_CHD_EN_SHIFT	6
+#define RT8973A_REG_CONTROL1_ADC_EN_SHIFT	7
+#define RT8973A_REG_CONTROL1_INTM_MASK		(0x1 << RT8973A_REG_CONTROL1_INTM_SHIFT)
+#define RT8973A_REG_CONTROL1_AUTO_CONFIG_MASK	(0x1 << RT8973A_REG_CONTROL1_AUTO_CONFIG_SHIFT)
+#define RT8973A_REG_CONTROL1_I2C_RST_EN_MASK	(0x1 << RT8973A_REG_CONTROL1_I2C_RST_EN_SHIFT)
+#define RT8973A_REG_CONTROL1_SWITCH_OPEN_MASK	(0x1 << RT8973A_REG_CONTROL1_SWITCH_OPEN_SHIFT)
+#define RT8973A_REG_CONTROL1_CHGTYP_MASK	(0x1 << RT8973A_REG_CONTROL1_CHGTYP_SHIFT)
+#define RT8973A_REG_CONTROL1_USB_CHD_EN_MASK	(0x1 << RT8973A_REG_CONTROL1_USB_CHD_EN_SHIFT)
+#define RT8973A_REG_CONTROL1_ADC_EN_MASK	(0x1 << RT8973A_REG_CONTROL1_ADC_EN_SHIFT)
+
+#define RT9873A_REG_INTM1_ATTACH_SHIFT		0
+#define RT9873A_REG_INTM1_DETACH_SHIFT		1
+#define RT9873A_REG_INTM1_CHGDET_SHIFT		2
+#define RT9873A_REG_INTM1_DCD_T_SHIFT		3
+#define RT9873A_REG_INTM1_OVP_SHIFT		4
+#define RT9873A_REG_INTM1_CONNECT_SHIFT		5
+#define RT9873A_REG_INTM1_ADC_CHG_SHIFT		6
+#define RT9873A_REG_INTM1_OTP_SHIFT		7
+#define RT9873A_REG_INTM1_ATTACH_MASK		(0x1 << RT9873A_REG_INTM1_ATTACH_SHIFT)
+#define RT9873A_REG_INTM1_DETACH_MASK		(0x1 <<  RT9873A_REG_INTM1_DETACH_SHIFT)
+#define RT9873A_REG_INTM1_CHGDET_MASK		(0x1 <<  RT9873A_REG_INTM1_CHGDET_SHIFT)
+#define RT9873A_REG_INTM1_DCD_T_MASK		(0x1 <<  RT9873A_REG_INTM1_DCD_T_SHIFT)
+#define RT9873A_REG_INTM1_OVP_MASK		(0x1 <<  RT9873A_REG_INTM1_OVP_SHIFT)
+#define RT9873A_REG_INTM1_CONNECT_MASK		(0x1 <<  RT9873A_REG_INTM1_CONNECT_SHIFT)
+#define RT9873A_REG_INTM1_ADC_CHG_MASK		(0x1 <<  RT9873A_REG_INTM1_ADC_CHG_SHIFT)
+#define RT9873A_REG_INTM1_OTP_MASK		(0x1 <<  RT9873A_REG_INTM1_OTP_SHIFT)
+
+#define RT9873A_REG_INTM2_UVLO_SHIFT		1
+#define RT9873A_REG_INTM2_POR_SHIFT		2
+#define RT9873A_REG_INTM2_OTP_FET_SHIFT		3
+#define RT9873A_REG_INTM2_OVP_FET_SHIFT		4
+#define RT9873A_REG_INTM2_OCP_LATCH_SHIFT	5
+#define RT9873A_REG_INTM2_OCP_SHIFT		6
+#define RT9873A_REG_INTM2_OVP_OCP_SHIFT		7
+#define RT9873A_REG_INTM2_UVLO_MASK		(0x1 << RT9873A_REG_INTM2_UVLO_SHIFT)
+#define RT9873A_REG_INTM2_POR_MASK		(0x1 <<  RT9873A_REG_INTM2_POR_SHIFT)
+#define RT9873A_REG_INTM2_OTP_FET_MASK		(0x1 <<  RT9873A_REG_INTM2_OTP_FET_SHIFT)
+#define RT9873A_REG_INTM2_OVP_FET_MASK		(0x1 <<  RT9873A_REG_INTM2_OVP_FET_SHIFT)
+#define RT9873A_REG_INTM2_OCP_LATCH_MASK	(0x1 <<  RT9873A_REG_INTM2_OCP_LATCH_SHIFT)
+#define RT9873A_REG_INTM2_OCP_MASK		(0x1 <<  RT9873A_REG_INTM2_OCP_SHIFT)
+#define RT9873A_REG_INTM2_OVP_OCP_MASK		(0x1 <<  RT9873A_REG_INTM2_OVP_OCP_SHIFT)
+
+#define RT8973A_REG_ADC_SHIFT			0
+#define RT8973A_REG_ADC_MASK			(0x1f << RT8973A_REG_ADC_SHIFT)
+
+#define RT8973A_REG_DEV1_OTG_SHIFT		0
+#define RT8973A_REG_DEV1_SDP_SHIFT		2
+#define RT8973A_REG_DEV1_UART_SHIFT		3
+#define RT8973A_REG_DEV1_CAR_KIT_TYPE1_SHIFT	4
+#define RT8973A_REG_DEV1_CDPORT_SHIFT		5
+#define RT8973A_REG_DEV1_DCPORT_SHIFT		6
+#define RT8973A_REG_DEV1_OTG_MASK		(0x1 << RT8973A_REG_DEV1_OTG_SHIFT)
+#define RT8973A_REG_DEV1_SDP_MASK		(0x1 << RT8973A_REG_DEV1_SDP_SHIFT)
+#define RT8973A_REG_DEV1_UART_MASK		(0x1 << RT8973A_REG_DEV1_UART_SHIFT)
+#define RT8973A_REG_DEV1_CAR_KIT_TYPE1_MASK	(0x1 << RT8973A_REG_DEV1_CAR_KIT_TYPE1_SHIFT)
+#define RT8973A_REG_DEV1_CDPORT_MASK		(0x1 << RT8973A_REG_DEV1_CDPORT_SHIFT)
+#define RT8973A_REG_DEV1_DCPORT_MASK		(0x1 << RT8973A_REG_DEV1_DCPORT_SHIFT)
+#define RT8973A_REG_DEV1_USB_MASK		(RT8973A_REG_DEV1_SDP_MASK \
+						| RT8973A_REG_DEV1_CDPORT_MASK)
+
+#define RT8973A_REG_DEV2_JIG_USB_ON_SHIFT	0
+#define RT8973A_REG_DEV2_JIG_USB_OFF_SHIFT	1
+#define RT8973A_REG_DEV2_JIG_UART_ON_SHIFT	2
+#define RT8973A_REG_DEV2_JIG_UART_OFF_SHIFT	3
+#define RT8973A_REG_DEV2_JIG_USB_ON_MASK	(0x1 << RT8973A_REG_DEV2_JIG_USB_ON_SHIFT)
+#define RT8973A_REG_DEV2_JIG_USB_OFF_MASK	(0x1 << RT8973A_REG_DEV2_JIG_USB_OFF_SHIFT)
+#define RT8973A_REG_DEV2_JIG_UART_ON_MASK	(0x1 << RT8973A_REG_DEV2_JIG_UART_ON_SHIFT)
+#define RT8973A_REG_DEV2_JIG_UART_OFF_MASK	(0x1 << RT8973A_REG_DEV2_JIG_UART_OFF_SHIFT)
+
+#define RT8973A_REG_MANUAL_SW1_DP_SHIFT		2
+#define RT8973A_REG_MANUAL_SW1_DM_SHIFT		5
+#define RT8973A_REG_MANUAL_SW1_DP_MASK		(0x7 << RT8973A_REG_MANUAL_SW1_DP_SHIFT)
+#define RT8973A_REG_MANUAL_SW1_DM_MASK		(0x7 << RT8973A_REG_MANUAL_SW1_DM_SHIFT)
+#define DM_DP_CON_SWITCH_OPEN			0x0
+#define DM_DP_CON_SWITCH_USB			0x1
+#define DM_DP_CON_SWITCH_UART			0x3
+#define DM_DP_SWITCH_OPEN			((DM_DP_CON_SWITCH_OPEN << RT8973A_REG_MANUAL_SW1_DP_SHIFT) \
+						| (DM_DP_CON_SWITCH_OPEN << RT8973A_REG_MANUAL_SW1_DM_SHIFT))
+#define DM_DP_SWITCH_USB			((DM_DP_CON_SWITCH_USB << RT8973A_REG_MANUAL_SW1_DP_SHIFT) \
+						| (DM_DP_CON_SWITCH_USB << RT8973A_REG_MANUAL_SW1_DM_SHIFT))
+#define DM_DP_SWITCH_UART			((DM_DP_CON_SWITCH_UART << RT8973A_REG_MANUAL_SW1_DP_SHIFT) \
+						| (DM_DP_CON_SWITCH_UART << RT8973A_REG_MANUAL_SW1_DM_SHIFT))
+
+#define RT8973A_REG_MANUAL_SW2_FET_ON_SHIFT	0
+#define RT8973A_REG_MANUAL_SW2_JIG_ON_SHIFT	2
+#define RT8973A_REG_MANUAL_SW2_BOOT_SW_SHIFT	3
+#define RT8973A_REG_MANUAL_SW2_FET_ON_MASK	(0x1 << RT8973A_REG_MANUAL_SW2_FET_ON_SHIFT)
+#define RT8973A_REG_MANUAL_SW2_JIG_ON_MASK	(0x1 << RT8973A_REG_MANUAL_SW2_JIG_ON_SHIFT)
+#define RT8973A_REG_MANUAL_SW2_BOOT_SW_MASK	(0x1 << RT8973A_REG_MANUAL_SW2_BOOT_SW_SHIFT)
+#define RT8973A_REG_MANUAL_SW2_FET_ON		0
+#define RT8973A_REG_MANUAL_SW2_FET_OFF		0x1
+#define RT8973A_REG_MANUAL_SW2_JIG_OFF		0
+#define RT8973A_REG_MANUAL_SW2_JIG_ON		0x1
+#define RT8973A_REG_MANUAL_SW2_BOOT_SW_ON	0
+#define RT8973A_REG_MANUAL_SW2_BOOT_SW_OFF	0x1
+
+#define RT8973A_REG_RESET_SHIFT			0
+#define RT8973A_REG_RESET_MASK			(0x1 << RT8973A_REG_RESET_SHIFT)
+#define RT8973A_REG_RESET			0x1
+
+/* RT8973A Interrupts */
+enum rt8973a_irq {
+	/* Interrupt1*/
+	RT8973A_INT1_ATTACH,
+	RT8973A_INT1_DETACH,
+	RT8973A_INT1_CHGDET,
+	RT8973A_INT1_DCD_T,
+	RT8973A_INT1_OVP,
+	RT8973A_INT1_CONNECT,
+	RT8973A_INT1_ADC_CHG,
+	RT8973A_INT1_OTP,
+
+	/* Interrupt2*/
+	RT8973A_INT2_UVLO,
+	RT8973A_INT2_POR,
+	RT8973A_INT2_OTP_FET,
+	RT8973A_INT2_OVP_FET,
+	RT8973A_INT2_OCP_LATCH,
+	RT8973A_INT2_OCP,
+	RT8973A_INT2_OVP_OCP,
+
+	RT8973A_NUM,
+};
+
+#define RT8973A_INT1_ATTACH_MASK		BIT(0)
+#define RT8973A_INT1_DETACH_MASK		BIT(1)
+#define RT8973A_INT1_CHGDET_MASK		BIT(2)
+#define RT8973A_INT1_DCD_T_MASK			BIT(3)
+#define RT8973A_INT1_OVP_MASK			BIT(4)
+#define RT8973A_INT1_CONNECT_MASK		BIT(5)
+#define RT8973A_INT1_ADC_CHG_MASK		BIT(6)
+#define RT8973A_INT1_OTP_MASK			BIT(7)
+#define RT8973A_INT2_UVLOT_MASK			BIT(0)
+#define RT8973A_INT2_POR_MASK			BIT(1)
+#define RT8973A_INT2_OTP_FET_MASK		BIT(2)
+#define RT8973A_INT2_OVP_FET_MASK		BIT(3)
+#define RT8973A_INT2_OCP_LATCH_MASK		BIT(4)
+#define RT8973A_INT2_OCP_MASK			BIT(5)
+#define RT8973A_INT2_OVP_OCP_MASK		BIT(6)
+
+#endif /*  __LINUX_EXTCON_RT8973A_H */