wifi: rtw89: 8922a: add 8922A basic chip info

8922A is a 802.11be chip that can support 2/5/6 GHz bands 160MHz bandwidth.
Introduce the basic info such as firmware file name, some hardware address
and size, supported spatial stream, TX descriptor and so on, and then
we can add more attributes by later patches.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231117024029.113845-2-pkshih@realtek.com

drivers/net/wireless/realtek/rtw89/reg.h

@@ -4045,6 +4045,12 @@
 #define R_BE_LTR_LATENCY_IDX2_V1 0x361C
 #define R_BE_LTR_LATENCY_IDX3_V1 0x3620
 
+#define R_BE_HCI_FUNC_EN 0x7880
+#define B_BE_HCI_CR_PROTECT BIT(31)
+#define B_BE_HCI_TRXBUF_EN BIT(2)
+#define B_BE_HCI_RXDMA_EN BIT(1)
+#define B_BE_HCI_TXDMA_EN BIT(0)
+
 #define R_BE_LTR_CTRL_0 0x8410
 #define B_BE_LTR_REQ_FW BIT(18)
 #define B_BE_LTR_IDX_FW_MASK GENMASK(17, 16)
@@ -4975,6 +4981,7 @@
 #define B_SEG0CSI_EN BIT(23)
 #define R_BSS_CLR_MAP 0x43ac
 #define R_BSS_CLR_MAP_V1 0x43B0
+#define R_BSS_CLR_MAP_V2 0x4EB0
 #define B_BSS_CLR_MAP_VLD0 BIT(28)
 #define B_BSS_CLR_MAP_TGT GENMASK(27, 22)
 #define B_BSS_CLR_MAP_STAID GENMASK(21, 11)
@@ -5268,6 +5275,8 @@
 #define R_BMODE_PDTH_EN_V1 0x4B74
 #define R_BMODE_PDTH_EN_V2 0x6718
 #define B_BMODE_PDTH_LIMIT_EN_MSK_V1 BIT(30)
+#define R_BSS_CLR_VLD_V2 0x4EBC
+#define B_BSS_CLR_VLD0_V2 BIT(2)
 #define R_CFO_COMP_SEG1_L 0x5384
 #define R_CFO_COMP_SEG1_H 0x5388
 #define R_CFO_COMP_SEG1_CTRL 0x538C

drivers/net/wireless/realtek/rtw89/rtw8922a.c

+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/* Copyright(c) 2023  Realtek Corporation
+ */
+
+#include "debug.h"
+#include "fw.h"
+#include "mac.h"
+#include "phy.h"
+#include "reg.h"
+#include "rtw8922a.h"
+
+#define RTW8922A_FW_FORMAT_MAX 0
+#define RTW8922A_FW_BASENAME "rtw89/rtw8922a_fw"
+#define RTW8922A_MODULE_FIRMWARE \
+	RTW8922A_FW_BASENAME ".bin"
+
+#ifdef CONFIG_PM
+static const struct wiphy_wowlan_support rtw_wowlan_stub_8922a = {
+	.flags = WIPHY_WOWLAN_MAGIC_PKT | WIPHY_WOWLAN_DISCONNECT,
+	.n_patterns = RTW89_MAX_PATTERN_NUM,
+	.pattern_max_len = RTW89_MAX_PATTERN_SIZE,
+	.pattern_min_len = 1,
+};
+#endif
+
+static const struct rtw89_chip_ops rtw8922a_chip_ops = {
+};
+
+const struct rtw89_chip_info rtw8922a_chip_info = {
+	.chip_id		= RTL8922A,
+	.chip_gen		= RTW89_CHIP_BE,
+	.ops			= &rtw8922a_chip_ops,
+	.mac_def		= &rtw89_mac_gen_be,
+	.phy_def		= &rtw89_phy_gen_be,
+	.fw_basename		= RTW8922A_FW_BASENAME,
+	.fw_format_max		= RTW8922A_FW_FORMAT_MAX,
+	.try_ce_fw		= false,
+	.bbmcu_nr		= 1,
+	.needed_fw_elms		= RTW89_BE_GEN_DEF_NEEDED_FW_ELEMENTS,
+	.fifo_size		= 589824,
+	.small_fifo_size	= false,
+	.dle_scc_rsvd_size	= 0,
+	.max_amsdu_limit	= 8000,
+	.dis_2g_40m_ul_ofdma	= false,
+	.rsvd_ple_ofst		= 0x8f800,
+	.rf_base_addr		= {0xe000, 0xf000},
+	.pwr_on_seq		= NULL,
+	.pwr_off_seq		= NULL,
+	.bb_table		= NULL,
+	.bb_gain_table		= NULL,
+	.rf_table		= {},
+	.nctl_table		= NULL,
+	.nctl_post_table	= NULL,
+	.dflt_parms		= NULL, /* load parm from fw */
+	.rfe_parms_conf		= NULL, /* load parm from fw */
+	.txpwr_factor_rf	= 2,
+	.txpwr_factor_mac	= 1,
+	.dig_table		= NULL,
+	.tssi_dbw_table		= NULL,
+	.support_chanctx_num	= 1,
+	.support_bands		= BIT(NL80211_BAND_2GHZ) |
+				  BIT(NL80211_BAND_5GHZ) |
+				  BIT(NL80211_BAND_6GHZ),
+	.support_unii4		= true,
+	.ul_tb_waveform_ctrl	= false,
+	.ul_tb_pwr_diff		= false,
+	.hw_sec_hdr		= true,
+	.rf_path_num		= 2,
+	.tx_nss			= 2,
+	.rx_nss			= 2,
+	.acam_num		= 128,
+	.bcam_num		= 20,
+	.scam_num		= 32,
+	.bacam_num		= 8,
+	.bacam_dynamic_num	= 8,
+	.bacam_ver		= RTW89_BACAM_V1,
+	.ppdu_max_usr		= 16,
+	.sec_ctrl_efuse_size	= 4,
+	.physical_efuse_size	= 0x1300,
+	.logical_efuse_size	= 0x70000,
+	.limit_efuse_size	= 0x40000,
+	.dav_phy_efuse_size	= 0,
+	.dav_log_efuse_size	= 0,
+	.phycap_addr		= 0x1700,
+	.phycap_size		= 0x38,
+
+	.ps_mode_supported	= BIT(RTW89_PS_MODE_RFOFF) |
+				  BIT(RTW89_PS_MODE_CLK_GATED) |
+				  BIT(RTW89_PS_MODE_PWR_GATED),
+	.low_power_hci_modes	= 0,
+	.hci_func_en_addr	= R_BE_HCI_FUNC_EN,
+	.h2c_desc_size		= sizeof(struct rtw89_rxdesc_short_v2),
+	.txwd_body_size		= sizeof(struct rtw89_txwd_body_v2),
+	.txwd_info_size		= sizeof(struct rtw89_txwd_info_v2),
+	.cfo_src_fd		= true,
+	.cfo_hw_comp            = true,
+	.dcfo_comp		= NULL,
+	.dcfo_comp_sft		= 0,
+	.imr_info		= NULL,
+	.bss_clr_vld		= {R_BSS_CLR_VLD_V2, B_BSS_CLR_VLD0_V2},
+	.bss_clr_map_reg	= R_BSS_CLR_MAP_V2,
+	.dma_ch_mask		= 0,
+#ifdef CONFIG_PM
+	.wowlan_stub		= &rtw_wowlan_stub_8922a,
+#endif
+	.xtal_info		= NULL,
+};
+EXPORT_SYMBOL(rtw8922a_chip_info);
+
+MODULE_FIRMWARE(RTW8922A_MODULE_FIRMWARE);
+MODULE_AUTHOR("Realtek Corporation");
+MODULE_DESCRIPTION("Realtek 802.11be wireless 8922A driver");
+MODULE_LICENSE("Dual BSD/GPL");

drivers/net/wireless/realtek/rtw89/rtw8922a.h

+/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
+/* Copyright(c) 2023  Realtek Corporation
+ */
+
+#ifndef __RTW89_8922A_H__
+#define __RTW89_8922A_H__
+
+#include "core.h"
+
+#define RF_PATH_NUM_8922A 2
+#define BB_PATH_NUM_8922A 2
+
+extern const struct rtw89_chip_info rtw8922a_chip_info;
+
+#endif

drivers/net/wireless/realtek/rtw89/rtw8922ae.c

@@ -7,6 +7,7 @@
 
 #include "pci.h"
 #include "reg.h"
+#include "rtw8922a.h"
 
 static const struct rtw89_pci_info rtw8922a_pci_info = {
 	.gen_def		= &rtw89_pci_gen_be,
@@ -58,6 +59,7 @@ static const struct rtw89_pci_info rtw8922a_pci_info = {
 };
 
 static const struct rtw89_driver_info rtw89_8922ae_info = {
+	.chip = &rtw8922a_chip_info,
 	.bus = {
 		.pci = &rtw8922a_pci_info,
 	},