Commit c0fcc4d9 authored by Esben Haabendal's avatar Esben Haabendal Committed by Andi Shyti

i2c: imx: move to generic GPIO recovery

Starting with
commit 75820314 ("i2c: core: add generic I2C GPIO recovery")
GPIO bus recovery is supported by the I2C core, so we can remove the
driver implementation and use that one instead.

As a nice side-effect, pinctrl becomes optional, allowing bus recovery on
LS1021A, which does not have such luxury, but can be wired up to use extra
fixed GPIO pins.

Note: The previous error messages about bus recovery not being supported is
dropped with this change. Given that it is perfectly possible to have platforms
where bus recovery works without pinctrl support, I happen to work on one such,
both error messages does not really make sense in those cases. And I don't see
how to know if this is the case or not.
Signed-off-by: default avatarEsben Haabendal <esben@geanix.com>
Acked-by: default avatarOleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: default avatarAndi Shyti <andi.shyti@kernel.org>
parent 4810603c
...@@ -212,10 +212,6 @@ struct imx_i2c_struct { ...@@ -212,10 +212,6 @@ struct imx_i2c_struct {
const struct imx_i2c_hwdata *hwdata; const struct imx_i2c_hwdata *hwdata;
struct i2c_bus_recovery_info rinfo; struct i2c_bus_recovery_info rinfo;
struct pinctrl *pinctrl;
struct pinctrl_state *pinctrl_pins_default;
struct pinctrl_state *pinctrl_pins_gpio;
struct imx_i2c_dma *dma; struct imx_i2c_dma *dma;
struct i2c_client *slave; struct i2c_client *slave;
enum i2c_slave_event last_slave_event; enum i2c_slave_event last_slave_event;
...@@ -1357,24 +1353,6 @@ static int i2c_imx_xfer_atomic(struct i2c_adapter *adapter, ...@@ -1357,24 +1353,6 @@ static int i2c_imx_xfer_atomic(struct i2c_adapter *adapter,
return result; return result;
} }
static void i2c_imx_prepare_recovery(struct i2c_adapter *adap)
{
struct imx_i2c_struct *i2c_imx;
i2c_imx = container_of(adap, struct imx_i2c_struct, adapter);
pinctrl_select_state(i2c_imx->pinctrl, i2c_imx->pinctrl_pins_gpio);
}
static void i2c_imx_unprepare_recovery(struct i2c_adapter *adap)
{
struct imx_i2c_struct *i2c_imx;
i2c_imx = container_of(adap, struct imx_i2c_struct, adapter);
pinctrl_select_state(i2c_imx->pinctrl, i2c_imx->pinctrl_pins_default);
}
/* /*
* We switch SCL and SDA to their GPIO function and do some bitbanging * We switch SCL and SDA to their GPIO function and do some bitbanging
* for bus recovery. These alternative pinmux settings can be * for bus recovery. These alternative pinmux settings can be
...@@ -1385,43 +1363,13 @@ static void i2c_imx_unprepare_recovery(struct i2c_adapter *adap) ...@@ -1385,43 +1363,13 @@ static void i2c_imx_unprepare_recovery(struct i2c_adapter *adap)
static int i2c_imx_init_recovery_info(struct imx_i2c_struct *i2c_imx, static int i2c_imx_init_recovery_info(struct imx_i2c_struct *i2c_imx,
struct platform_device *pdev) struct platform_device *pdev)
{ {
struct i2c_bus_recovery_info *rinfo = &i2c_imx->rinfo; struct i2c_bus_recovery_info *bri = &i2c_imx->rinfo;
i2c_imx->pinctrl = devm_pinctrl_get(&pdev->dev);
if (!i2c_imx->pinctrl) {
dev_info(&pdev->dev, "pinctrl unavailable, bus recovery not supported\n");
return 0;
}
if (IS_ERR(i2c_imx->pinctrl)) {
dev_info(&pdev->dev, "can't get pinctrl, bus recovery not supported\n");
return PTR_ERR(i2c_imx->pinctrl);
}
i2c_imx->pinctrl_pins_default = pinctrl_lookup_state(i2c_imx->pinctrl,
PINCTRL_STATE_DEFAULT);
i2c_imx->pinctrl_pins_gpio = pinctrl_lookup_state(i2c_imx->pinctrl,
"gpio");
rinfo->sda_gpiod = devm_gpiod_get_optional(&pdev->dev, "sda", GPIOD_IN);
rinfo->scl_gpiod = devm_gpiod_get(&pdev->dev, "scl", GPIOD_OUT_HIGH_OPEN_DRAIN);
if (PTR_ERR(rinfo->sda_gpiod) == -EPROBE_DEFER ||
PTR_ERR(rinfo->scl_gpiod) == -EPROBE_DEFER) {
return -EPROBE_DEFER;
} else if (IS_ERR(rinfo->sda_gpiod) ||
IS_ERR(rinfo->scl_gpiod) ||
IS_ERR(i2c_imx->pinctrl_pins_default) ||
IS_ERR(i2c_imx->pinctrl_pins_gpio)) {
dev_dbg(&pdev->dev, "recovery information incomplete\n");
return 0;
}
dev_dbg(&pdev->dev, "using scl%s for recovery\n", bri->pinctrl = devm_pinctrl_get(&pdev->dev);
rinfo->sda_gpiod ? ",sda" : ""); if (IS_ERR(bri->pinctrl))
return PTR_ERR(bri->pinctrl);
rinfo->prepare_recovery = i2c_imx_prepare_recovery; i2c_imx->adapter.bus_recovery_info = bri;
rinfo->unprepare_recovery = i2c_imx_unprepare_recovery;
rinfo->recover_bus = i2c_generic_scl_recovery;
i2c_imx->adapter.bus_recovery_info = rinfo;
return 0; return 0;
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment