Revert "staging: brcm80211: separate hndpmu functionality for brcmsmac driver"

This reverts commit 29811f9d as it depends on
another patch that was not yet applied.

Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/brcm80211/brcmsmac/Makefile

@@ -38,7 +38,6 @@ BRCMSMAC_OFILES := \
 	wlc_channel.o \
 	wlc_main.o \
 	wlc_phy_shim.o \
-	wlc_pmu.o \
 	wlc_rate.o \
 	wlc_stf.o \
 	phy/wlc_phy_cmn.o \
@@ -53,6 +52,7 @@ BRCMSMAC_OFILES := \
 	../util/bcmotp.o \
 	../util/bcmsrom.o \
 	../util/hnddma.o \
+	../util/hndpmu.o \
 	../util/nicpci.o \
 	../util/qmath.o \
 	../util/nvram/nvram_ro.o

drivers/staging/brcm80211/brcmsmac/wlc_pmu.h

-/*
- * Copyright (c) 2011 Broadcom Corporation
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
- * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
- * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
- * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-
-#ifndef WLC_PMU_H_
-#define WLC_PMU_H_
-
-#include <linux/types.h>
-
-#include <siutils.h>
-
-/*
- * LDO selections used in si_pmu_set_ldo_voltage
- */
-#define SET_LDO_VOLTAGE_LDO1	1
-#define SET_LDO_VOLTAGE_LDO2	2
-#define SET_LDO_VOLTAGE_LDO3	3
-#define SET_LDO_VOLTAGE_PAREF	4
-#define SET_LDO_VOLTAGE_CLDO_PWM	5
-#define SET_LDO_VOLTAGE_CLDO_BURST	6
-#define SET_LDO_VOLTAGE_CBUCK_PWM	7
-#define SET_LDO_VOLTAGE_CBUCK_BURST	8
-#define SET_LDO_VOLTAGE_LNLDO1	9
-#define SET_LDO_VOLTAGE_LNLDO2_SEL	10
-
-extern void si_pmu_set_ldo_voltage(si_t *sih, u8 ldo, u8 voltage);
-extern u16 si_pmu_fast_pwrup_delay(si_t *sih);
-extern void si_pmu_sprom_enable(si_t *sih, bool enable);
-extern u32 si_pmu_chipcontrol(si_t *sih, uint reg, u32 mask, u32 val);
-extern u32 si_pmu_regcontrol(si_t *sih, uint reg, u32 mask, u32 val);
-extern u32 si_pmu_ilp_clock(si_t *sih);
-extern u32 si_pmu_alp_clock(si_t *sih);
-extern void si_pmu_pllupd(si_t *sih);
-extern void si_pmu_spuravoid(si_t *sih, u8 spuravoid);
-extern u32 si_pmu_pllcontrol(si_t *sih, uint reg, u32 mask, u32 val);
-extern void si_pmu_init(si_t *sih);
-extern void si_pmu_chip_init(si_t *sih);
-extern void si_pmu_pll_init(si_t *sih, u32 xtalfreq);
-extern void si_pmu_res_init(si_t *sih);
-extern void si_pmu_swreg_init(si_t *sih);
-extern u32 si_pmu_measure_alpclk(si_t *sih);
-extern bool si_pmu_is_otp_powered(si_t *sih);
-extern void si_pmu_otp_power(si_t *sih, bool on);
-
-#endif /* WLC_PMU_H_ */