Commit c1994084 authored by Andy Walls's avatar Andy Walls Committed by Mauro Carvalho Chehab

V4L/DVB (10441): cx18: Fix VBI ioctl() handling and Raw/Sliced VBI state management

More sliced VBI fixes to bring the cx18 driver closer to full V4L2 spec
compliance for VBI and to get sliced VBI working better.
Signed-off-by: default avatarAndy Walls <awalls@radix.net>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent 776fa869
......@@ -25,8 +25,8 @@
#include "cx18-driver.h"
/*
* For sliced VBI output, we set up to use VIP-1.1, 10-bit mode,
* NN counts 4 bytes Dwords, an IDID of 0x00 0x80 or one with the VBI line #.
* For sliced VBI output, we set up to use VIP-1.1, 8-bit mode,
* NN counts 1 byte Dwords, an IDID with the VBI line # in it.
* Thus, according to the VIP-2 Spec, our VBI ancillary data lines
* (should!) look like:
* 4 byte EAV code: 0xff 0x00 0x00 0xRP
......@@ -35,8 +35,8 @@
* 1 byte data identifier: ne010iii (parity bits, 010, DID bits)
* 1 byte secondary data id: nessssss (parity bits, SDID bits)
* 1 byte data word count: necccccc (parity bits, NN Dword count)
* 2 byte Internal DID: 0x00 0x80 (programmed value)
* 4*NN data bytes
* 2 byte Internal DID: VBI-line-# 0x80
* NN data bytes
* 1 byte checksum
* Fill bytes needed to fil out to 4*NN bytes of payload
*
......@@ -65,7 +65,7 @@ struct vbi_anc_data {
u8 sdid;
u8 data_count;
u8 idid[2];
u8 payload[1]; /* 4*data_count of payload */
u8 payload[1]; /* data_count of payload */
/* u8 checksum; */
/* u8 fill[]; Variable number of fill bytes */
};
......@@ -215,6 +215,7 @@ int cx18_av_vbi(struct cx18 *cx, unsigned int cmd, void *arg)
cx18_av_write(cx, 0x406, 0x13);
cx18_av_write(cx, 0x47f, vbi_offset);
/* Force impossible lines to 0 */
if (is_pal) {
for (i = 0; i <= 6; i++)
svbi->service_lines[0][i] =
......@@ -229,6 +230,7 @@ int cx18_av_vbi(struct cx18 *cx, unsigned int cmd, void *arg)
svbi->service_lines[1][i] = 0;
}
/* Build register values for requested service lines */
for (i = 7; i <= 23; i++) {
for (x = 0; x <= 1; x++) {
switch (svbi->service_lines[1-x][i]) {
......@@ -242,7 +244,7 @@ int cx18_av_vbi(struct cx18 *cx, unsigned int cmd, void *arg)
lcr[i] |= 6 << (4 * x);
break;
case V4L2_SLICED_VPS:
lcr[i] |= 9 << (4 * x);
lcr[i] |= 7 << (4 * x); /*'840 differs*/
break;
}
}
......
......@@ -42,6 +42,13 @@
#include <media/v4l2-chip-ident.h>
#include <linux/i2c-id.h>
static int cx18_vbi_streaming(struct cx18 *cx)
{
struct cx18_stream *s_vbi = &cx->streams[CX18_ENC_STREAM_TYPE_VBI];
return (s_vbi->handle != CX18_INVALID_TASK_HANDLE) &&
test_bit(CX18_F_S_STREAMING, &s_vbi->s_flags);
}
u16 cx18_service2vbi(int type)
{
switch (type) {
......@@ -58,12 +65,21 @@ u16 cx18_service2vbi(int type)
}
}
/* Check if VBI services are allowed on the (field, line) for the video std */
static int valid_service_line(int field, int line, int is_pal)
{
return (is_pal && line >= 6 && (line != 23 || field == 0)) ||
return (is_pal && line >= 6 &&
((field == 0 && line <= 23) || (field == 1 && line <= 22))) ||
(!is_pal && line >= 10 && line < 22);
}
/*
* For a (field, line, std) and inbound potential set of services for that line,
* return the first valid service of those passed in the incoming set for that
* line in priority order:
* CC, VPS, or WSS over TELETEXT for well known lines
* TELETEXT, before VPS, before CC, before WSS, for other lines
*/
static u16 select_service_from_set(int field, int line, u16 set, int is_pal)
{
u16 valid_set = (is_pal ? V4L2_SLICED_VBI_625 : V4L2_SLICED_VBI_525);
......@@ -90,6 +106,10 @@ static u16 select_service_from_set(int field, int line, u16 set, int is_pal)
return 0;
}
/*
* Expand the service_set of *fmt into valid service_lines for the std,
* and clear the passed in fmt->service_set
*/
void cx18_expand_service_set(struct v4l2_sliced_vbi_format *fmt, int is_pal)
{
u16 set = fmt->service_set;
......@@ -102,6 +122,10 @@ void cx18_expand_service_set(struct v4l2_sliced_vbi_format *fmt, int is_pal)
}
}
/*
* Sanitize the service_lines in *fmt per the video std, and return 1
* if any service_line is left as valid after santization
*/
static int check_service_set(struct v4l2_sliced_vbi_format *fmt, int is_pal)
{
int f, l;
......@@ -116,6 +140,7 @@ static int check_service_set(struct v4l2_sliced_vbi_format *fmt, int is_pal)
return set != 0;
}
/* Compute the service_set from the assumed valid service_lines of *fmt */
u16 cx18_get_service_set(struct v4l2_sliced_vbi_format *fmt)
{
int f, l;
......@@ -162,7 +187,7 @@ static int cx18_g_fmt_vbi_cap(struct file *file, void *fh,
struct v4l2_vbi_format *vbifmt = &fmt->fmt.vbi;
vbifmt->sampling_rate = 27000000;
vbifmt->offset = 248;
vbifmt->offset = 248; /* FIXME - slightly wrong for both 50 & 60 Hz */
vbifmt->samples_per_line = vbi_active_samples - 4;
vbifmt->sample_format = V4L2_PIX_FMT_GREY;
vbifmt->start[0] = cx->vbi.start[0];
......@@ -180,12 +205,25 @@ static int cx18_g_fmt_sliced_vbi_cap(struct file *file, void *fh,
struct cx18 *cx = ((struct cx18_open_id *)fh)->cx;
struct v4l2_sliced_vbi_format *vbifmt = &fmt->fmt.sliced;
/* sane, V4L2 spec compliant, defaults */
vbifmt->reserved[0] = 0;
vbifmt->reserved[1] = 0;
vbifmt->io_size = sizeof(struct v4l2_sliced_vbi_data) * 36;
memset(vbifmt->service_lines, 0, sizeof(vbifmt->service_lines));
vbifmt->service_set = 0;
cx18_av_cmd(cx, VIDIOC_G_FMT, fmt);
/*
* Fetch the configured service_lines and total service_set from the
* digitizer/slicer. Note, cx18_av_vbi() wipes the passed in
* fmt->fmt.sliced under valid calling conditions
*/
if (cx18_av_cmd(cx, VIDIOC_G_FMT, fmt))
return -EINVAL;
/* Ensure V4L2 spec compliant output */
vbifmt->reserved[0] = 0;
vbifmt->reserved[1] = 0;
vbifmt->io_size = sizeof(struct v4l2_sliced_vbi_data) * 36;
vbifmt->service_set = cx18_get_service_set(vbifmt);
return 0;
}
......@@ -224,9 +262,11 @@ static int cx18_try_fmt_sliced_vbi_cap(struct file *file, void *fh,
vbifmt->reserved[0] = 0;
vbifmt->reserved[1] = 0;
/* If given a service set, expand it validly & clear passed in set */
if (vbifmt->service_set)
cx18_expand_service_set(vbifmt, cx->is_50hz);
check_service_set(vbifmt, cx->is_50hz);
/* Sanitize the service_lines, and compute the new set if any valid */
if (check_service_set(vbifmt, cx->is_50hz))
vbifmt->service_set = cx18_get_service_set(vbifmt);
return 0;
}
......@@ -272,12 +312,22 @@ static int cx18_s_fmt_vbi_cap(struct file *file, void *fh,
if (ret)
return ret;
if (!cx18_raw_vbi(cx) && atomic_read(&cx->ana_capturing) > 0)
if (!cx18_raw_vbi(cx) && cx18_vbi_streaming(cx))
return -EBUSY;
/*
* Set the digitizer registers for raw active VBI.
* Note cx18_av_vbi_wipes out alot of the passed in fmt under valid
* calling conditions
*/
ret = cx18_av_cmd(cx, VIDIOC_S_FMT, fmt);
if (ret)
return ret;
/* Store our new v4l2 (non-)sliced VBI state */
cx->vbi.sliced_in->service_set = 0;
cx->vbi.in.type = V4L2_BUF_TYPE_VBI_CAPTURE;
cx18_av_cmd(cx, VIDIOC_S_FMT, fmt);
return cx18_g_fmt_vbi_cap(file, fh, fmt);
}
......@@ -293,17 +343,20 @@ static int cx18_s_fmt_sliced_vbi_cap(struct file *file, void *fh,
if (ret)
return ret;
ret = cx18_try_fmt_sliced_vbi_cap(file, fh, fmt);
if (ret)
return ret;
if (check_service_set(vbifmt, cx->is_50hz) == 0)
return -EINVAL;
cx18_try_fmt_sliced_vbi_cap(file, fh, fmt);
if (cx18_raw_vbi(cx) && atomic_read(&cx->ana_capturing) > 0)
if (cx18_raw_vbi(cx) && cx18_vbi_streaming(cx))
return -EBUSY;
/*
* Set the service_lines requested in the digitizer/slicer registers.
* Note, cx18_av_vbi() wipes some "impossible" service lines in the
* passed in fmt->fmt.sliced under valid calling conditions
*/
ret = cx18_av_cmd(cx, VIDIOC_S_FMT, fmt);
if (ret)
return ret;
/* Store our current v4l2 sliced VBI settings */
cx->vbi.in.type = V4L2_BUF_TYPE_SLICED_VBI_CAPTURE;
cx18_av_cmd(cx, VIDIOC_S_FMT, fmt);
memcpy(cx->vbi.sliced_in, vbifmt, sizeof(*cx->vbi.sliced_in));
return 0;
}
......@@ -657,16 +710,26 @@ static int cx18_g_sliced_vbi_cap(struct file *file, void *fh,
int set = cx->is_50hz ? V4L2_SLICED_VBI_625 : V4L2_SLICED_VBI_525;
int f, l;
if (cap->type == V4L2_BUF_TYPE_SLICED_VBI_CAPTURE) {
if (cap->type != V4L2_BUF_TYPE_SLICED_VBI_CAPTURE)
return -EINVAL;
cap->service_set = 0;
for (f = 0; f < 2; f++) {
for (l = 0; l < 24; l++) {
if (valid_service_line(f, l, cx->is_50hz))
if (valid_service_line(f, l, cx->is_50hz)) {
/*
* We can find all v4l2 supported vbi services
* for the standard, on a valid line for the std
*/
cap->service_lines[f][l] = set;
cap->service_set |= set;
} else
cap->service_lines[f][l] = 0;
}
}
for (f = 0; f < 3; f++)
cap->reserved[f] = 0;
return 0;
}
return -EINVAL;
}
static int cx18_g_enc_index(struct file *file, void *fh,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment