clk: imx: Use div64_ul instead of do_div

do_div() does a 64-by-32 division. Here the divisor is an unsigned long
which on some platforms is 64 bit wide. So use div64_ul instead of do_div
to avoid a possible truncation.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Link: https://lore.kernel.org/r/20211118080634.165275-1-deng.changcheng@zte.com.cnSigned-off-by: Abel Vesa <abel.vesa@nxp.com>

drivers/clk/imx/clk-pllv3.c

@@ -247,7 +247,7 @@ static long clk_pllv3_av_round_rate(struct clk_hw *hw, unsigned long rate,
 	div = rate / parent_rate;
 	temp64 = (u64) (rate - div * parent_rate);
 	temp64 *= mfd;
-	do_div(temp64, parent_rate);
+	temp64 = div64_ul(temp64, parent_rate);
 	mfn = temp64;
 
 	temp64 = (u64)parent_rate;
@@ -277,7 +277,7 @@ static int clk_pllv3_av_set_rate(struct clk_hw *hw, unsigned long rate,
 	div = rate / parent_rate;
 	temp64 = (u64) (rate - div * parent_rate);
 	temp64 *= mfd;
-	do_div(temp64, parent_rate);
+	temp64 = div64_ul(temp64, parent_rate);
 	mfn = temp64;
 
 	val = readl_relaxed(pll->base);
@@ -334,7 +334,7 @@ static struct clk_pllv3_vf610_mf clk_pllv3_vf610_rate_to_mf(
 		/* rate = parent_rate * (mfi + mfn/mfd) */
 		temp64 = rate - parent_rate * mf.mfi;
 		temp64 *= mf.mfd;
-		do_div(temp64, parent_rate);
+		temp64 = div64_ul(temp64, parent_rate);
 		mf.mfn = temp64;
 	}