ASoC: dt-bindings: cirrus,cs35l41: cleanup $ref and example

Non-functional cleanup:
1. Drop unneeded quotes form $ref,
2. Example: Use generic node name, use define for GPIO flag, adjust
   indentation to consistent 4-space style.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221224154210.43356-2-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Documentation/devicetree/bindings/sound/cirrus,cs35l41.yaml

@@ -45,7 +45,7 @@ properties:
       Configures the peak current by monitoring the current through the boost FET.
       Range starts at 1600 mA and goes to a maximum of 4500 mA with increments
       of 50 mA. See section 4.3.6 of the datasheet for details.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 1600
     maximum: 4500
     default: 4500
@@ -54,7 +54,7 @@ properties:
     description:
       Boost inductor value, expressed in nH. Valid
       values include 1000, 1200, 1500 and 2200.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 1000
     maximum: 2200
 
@@ -63,7 +63,7 @@ properties:
       Total equivalent boost capacitance on the VBST
       and VAMP pins, derated at 11 volts DC. The value must be rounded to the
       nearest integer and expressed in uF.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
 
   cirrus,asp-sdout-hiz:
     description:
@@ -73,7 +73,7 @@ properties:
       1 = Hi-Z during unused slots but logic 0 while all transmit channels disabled
       2 = (Default) Logic 0 during unused slots, but Hi-Z while all transmit channels disabled
       3 = Hi-Z during unused slots and while all transmit channels disabled
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 3
     default: 2
@@ -87,7 +87,7 @@ properties:
       enable boost voltage.
       0 = Internal Boost
       1 = External Boost
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 1
 
@@ -112,7 +112,7 @@ properties:
       1 = GPIO
       2 = Sync
       3 = MCLK input
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 3
 
@@ -139,7 +139,7 @@ properties:
       3 = MCLK input
       4 = Push-pull INTB (active low)
       5 = Push-pull INT (active high)
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 5
 
@@ -179,17 +179,19 @@ unevaluatedProperties: false
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
+
     spi {
         #address-cells = <1>;
         #size-cells = <0>;
 
-        cs35l41: cs35l41@2 {
+        cs35l41: speaker-amp@2 {
             #sound-dai-cells = <1>;
             compatible = "cirrus,cs35l41";
             reg = <2>;
             VA-supply = <&dummy_vreg>;
             VP-supply = <&dummy_vreg>;
-          reset-gpios = <&gpio 110 0>;
+            reset-gpios = <&gpio 110 GPIO_ACTIVE_HIGH>;
 
             cirrus,boost-type = <0>;
             cirrus,boost-peak-milliamp = <4500>;