V4L/DVB (5477): CodingStyle cleanups on for loops at bttv-cards.c

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

drivers/media/video/bt8xx/bttv-cards.c

@@ -3638,7 +3638,7 @@ static int __devinit pvr_altera_load(struct bttv *btv, u8 *micro, u32 microlen)
 
 	for (n = 0; n < microlen; n++) {
 		bits = micro[n];
-		for ( i = 0 ; i < 8 ; i++ ) {
+		for (i = 0 ; i < 8 ; i++) {
 			gpio_bits(BTTV_ALT_DCLK,0);
 			if (bits & 0x01)
 				gpio_bits(BTTV_ALT_DATA,BTTV_ALT_DATA);
@@ -3691,7 +3691,7 @@ static void __devinit osprey_eeprom(struct bttv *btv)
 	       /* this might be an antique... check for MMAC label in eeprom */
 	       if ((ee[0]=='M') && (ee[1]=='M') && (ee[2]=='A') && (ee[3]=='C')) {
 		       unsigned char checksum = 0;
-		       for (i =0; i<21; i++)
+		       for (i = 0; i < 21; i++)
 			       checksum += ee[i];
 		       if (checksum != ee[21])
 			       return;
@@ -3703,10 +3703,11 @@ static void __devinit osprey_eeprom(struct bttv *btv)
 	       unsigned short type;
 	       int offset = 4*16;
 
-	       for(; offset < 8*16; offset += 16) {
+	       for (; offset < 8*16; offset += 16) {
 		       unsigned short checksum = 0;
 		       /* verify the checksum */
-		       for(i = 0; i<14; i++) checksum += ee[i+offset];
+		       for (i = 0; i < 14; i++)
+				checksum += ee[i+offset];
 			checksum = ~checksum;  /* no idea why */
 			if ((((checksum>>8)&0x0FF) == ee[offset+14]) &&
 				   ((checksum & 0x0FF) == ee[offset+15])) {
@@ -3721,7 +3722,6 @@ static void __devinit osprey_eeprom(struct bttv *btv)
 	       type = (ee[offset+4]<<8) | (ee[offset+5]);
 
 	       switch(type) {
-
 	       /* 848 based */
 	       case 0x0004:
 		       btv->c.type = BTTV_BOARD_OSPREY1x0_848;
@@ -4149,8 +4149,7 @@ static int tea5757_read(struct bttv *btv)
 	}
 
 	dprintk("bttv%d: tea5757:",btv->c.nr);
-	for(i = 0; i < 24; i++)
-	{
+	for (i = 0; i < 24; i++) {
 		udelay(5);
 		bus_high(btv,btv->mbox_clk);
 		udelay(5);
@@ -4182,8 +4181,7 @@ static int tea5757_write(struct bttv *btv, int value)
 	dprintk("bttv%d: tea5757: write 0x%X\n", btv->c.nr, value);
 	bus_low(btv,btv->mbox_clk);
 	bus_high(btv,btv->mbox_we);
-	for(i = 0; i < 25; i++)
-	{
+	for (i = 0; i < 25; i++) {
 		if (reg & 0x1000000)
 			bus_high(btv,btv->mbox_data);
 		else
@@ -4755,7 +4753,7 @@ static void kodicom4400r_init(struct bttv *btv)
 	gpio_write(1 << 9);	/* reset MUX */
 	gpio_write(0);
 	/* Preset camera 0 to the 4 controllers */
-	for (ix=0; ix<4; ix++) {
+	for (ix = 0; ix < 4; ix++) {
 		sw_status[ix] = ix;
 		kodicom4400r_write(btv, ix, ix, 1);
 	}