Commit c1fecabe authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'for-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

Pull power supply and reset updates from Sebastian Reichel:

 - Improve support for TI bq20z75 in sbs-battery

 - Add Qualcomm PM8xxx reboot driver

 - Add cros-ec USBPD charger driver

 - Move ds2760 battery driver from w1 to power-supply and add DT support

 - Misc fixes

* tag 'for-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (28 commits)
  power: supply: bq27xxx: Update comments
  power: supply: max77693_charger: fix unintentional fall-through
  power: supply: mark expected switch fall-throughs
  power: supply: lego_ev3_battery: fix Vce offset
  power: supply: lego_ev3_battery: Don't ignore iio_read_channel_processed() return value
  power: supply: ds2760_battery: add devicetree probing
  power: supply: ds2760_battery: merge ds2760 supply driver with its w1 slave companion
  w1: core: match sub-nodes of bus masters in devicetree
  dt-bindings: w1: document bindings for ds2760 battery monitor
  dt-bindings: w1: document generic onewire bindings
  power: supply: adp5061: Fix a couple off by ones
  dt-bindings: power: reset: qcom: Add resin binding
  adp5061: New driver for ADP5061 I2C battery charger
  power: generic-adc-battery: check for duplicate properties copied from iio channels
  power: generic-adc-battery: fix out-of-bounds write when copying channel properties
  power: supply: axp288_charger: Fix initial constant_charge_current value
  power: supply: ab8500: stop using getnstimeofday64()
  power: gemini-poweroff: Avoid more spurious poweroffs
  power: vexpress: fix corruption in notifier registration
  power: remove possible deadlock when unregistering power_supply
  ...
parents 99cc7ad4 5198a483
Qualcomm PON Device
The Power On device for Qualcomm PM8xxx is MFD supporting pwrkey
and resin along with the Android reboot-mode.
This DT node has pwrkey and resin as sub nodes.
Required Properties:
-compatible: "qcom,pm8916-pon"
-reg: Specifies the physical address of the pon register
Optional subnode:
-pwrkey: Specifies the subnode pwrkey and should follow the
qcom,pm8941-pwrkey.txt description.
-resin: Specifies the subnode resin and should follow the
qcom,pm8xxx-pwrkey.txt description.
The rest of the properties should follow the generic reboot-mode description
found in reboot-mode.txt
Example:
pon@800 {
compatible = "qcom,pm8916-pon";
reg = <0x800>;
mode-bootloader = <0x2>;
mode-recovery = <0x1>;
pwrkey {
compatible = "qcom,pm8941-pwrkey";
interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
debounce = <15625>;
bias-pull-up;
linux,code = <KEY_POWER>;
};
resin {
compatible = "qcom,pm8941-resin";
interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
debounce = <15625>;
bias-pull-up;
linux,code = <KEY_VOLUMEDOWN>;
};
};
Devicetree bindings for Maxim DS2760
====================================
The ds2760 is a w1 slave device and must hence have its sub-node in DT
under a w1 bus master node.
The device exposes a power supply, so the details described in
Documentation/devicetree/bindings/power/supply/power_supply.txt apply.
Required properties:
- compatible: must be "maxim,ds2760"
Optional properties:
- power-supplies: Refers to one or more power supplies connected to
this battery.
- maxim,pmod-enabled: This boolean property enables the DS2760 to enter
sleep mode when the DQ line goes low for greater
than 2 seconds and leave sleep Mode when the DQ
line goes high.
- maxim,cache-time-ms: Time im milliseconds to cache the data for. When
this time expires, the values are read again from
the hardware. Defaults to 1000.
- rated-capacity-microamp-hours:
The rated capacity of the battery, in mAh.
If not specified, the value stored in the
non-volatile chip memory is used.
...@@ -2,7 +2,11 @@ SBS sbs-battery ...@@ -2,7 +2,11 @@ SBS sbs-battery
~~~~~~~~~~ ~~~~~~~~~~
Required properties : Required properties :
- compatible : "sbs,sbs-battery" - compatible: "<vendor>,<part-number>", "sbs,sbs-battery" as fallback. The
part number compatible string might be used in order to take care of
vendor specific registers.
Known <vendor>,<part-number>:
ti,bq20z75
Optional properties : Optional properties :
- sbs,i2c-retry-count : The number of times to retry i2c transactions on i2c - sbs,i2c-retry-count : The number of times to retry i2c transactions on i2c
...@@ -14,9 +18,9 @@ Optional properties : ...@@ -14,9 +18,9 @@ Optional properties :
Example: Example:
bq20z75@b { battery@b {
compatible = "sbs,sbs-battery"; compatible = "ti,bq20z75", "sbs,sbs-battery";
reg = < 0xb >; reg = <0xb>;
sbs,i2c-retry-count = <2>; sbs,i2c-retry-count = <2>;
sbs,poll-retry-count = <10>; sbs,poll-retry-count = <10>;
sbs,battery-detect-gpios = <&gpio-controller 122 1>; sbs,battery-detect-gpios = <&gpio-controller 122 1>;
......
...@@ -13,10 +13,15 @@ Optional properties: ...@@ -13,10 +13,15 @@ Optional properties:
- linux,open-drain: if specified, the data pin is considered in - linux,open-drain: if specified, the data pin is considered in
open-drain mode. open-drain mode.
Also refer to the generic w1.txt document.
Examples: Examples:
onewire { onewire {
compatible = "w1-gpio"; compatible = "w1-gpio";
gpios = <&gpio 126 0>, <&gpio 105 0>; gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
};
battery {
// ...
};
};
Generic devicetree bindings for onewire (w1) busses
===================================================
Onewire busses are described through nodes of their master bus controller.
Slave devices are listed as sub-nodes of such master devices. For now, only
one slave is allowed per bus master.
Example:
charger: charger {
compatible = "gpio-charger";
charger-type = "mains";
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
onewire {
compatible = "w1-gpio";
gpios = <&gpio 100 0>, <&gpio 101 0>;
battery {
compatible = "maxim,ds2760";
power-supplies = <&charger>;
};
};
...@@ -842,6 +842,13 @@ S: Supported ...@@ -842,6 +842,13 @@ S: Supported
F: drivers/mux/adgs1408.c F: drivers/mux/adgs1408.c
F: Documentation/devicetree/bindings/mux/adgs1408.txt F: Documentation/devicetree/bindings/mux/adgs1408.txt
ANALOG DEVICES INC ADP5061 DRIVER
M: Stefan Popa <stefan.popa@analog.com>
L: linux-pm@vger.kernel.org
W: http://ez.analog.com/community/linux-device-drivers
S: Supported
F: drivers/power/supply/adp5061.c
ANALOG DEVICES INC ADV7180 DRIVER ANALOG DEVICES INC ADV7180 DRIVER
M: Lars-Peter Clausen <lars@metafoo.de> M: Lars-Peter Clausen <lars@metafoo.de>
L: linux-media@vger.kernel.org L: linux-media@vger.kernel.org
......
...@@ -104,6 +104,17 @@ config POWER_RESET_MSM ...@@ -104,6 +104,17 @@ config POWER_RESET_MSM
help help
Power off and restart support for Qualcomm boards. Power off and restart support for Qualcomm boards.
config POWER_RESET_QCOM_PON
tristate "Qualcomm power-on driver"
depends on ARCH_QCOM
depends on MFD_SPMI_PMIC
select REBOOT_MODE
help
Power On support for Qualcomm boards.
If you have a Qualcomm platform and need support for
power-on and reboot reason, Say Y.
If unsure, Say N.
config POWER_RESET_OCELOT_RESET config POWER_RESET_OCELOT_RESET
bool "Microsemi Ocelot reset driver" bool "Microsemi Ocelot reset driver"
depends on MSCC_OCELOT || COMPILE_TEST depends on MSCC_OCELOT || COMPILE_TEST
......
...@@ -11,6 +11,7 @@ obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o ...@@ -11,6 +11,7 @@ obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
obj-$(CONFIG_POWER_RESET_GPIO_RESTART) += gpio-restart.o obj-$(CONFIG_POWER_RESET_GPIO_RESTART) += gpio-restart.o
obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o
obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o
obj-$(CONFIG_POWER_RESET_QCOM_PON) += qcom-pon.o
obj-$(CONFIG_POWER_RESET_OCELOT_RESET) += ocelot-reset.o obj-$(CONFIG_POWER_RESET_OCELOT_RESET) += ocelot-reset.o
obj-$(CONFIG_POWER_RESET_PIIX4_POWEROFF) += piix4-poweroff.o obj-$(CONFIG_POWER_RESET_PIIX4_POWEROFF) += piix4-poweroff.o
obj-$(CONFIG_POWER_RESET_LTC2952) += ltc2952-poweroff.o obj-$(CONFIG_POWER_RESET_LTC2952) += ltc2952-poweroff.o
......
...@@ -130,7 +130,17 @@ static int gemini_poweroff_probe(struct platform_device *pdev) ...@@ -130,7 +130,17 @@ static int gemini_poweroff_probe(struct platform_device *pdev)
val |= GEMINI_CTRL_ENABLE; val |= GEMINI_CTRL_ENABLE;
writel(val, gpw->base + GEMINI_PWC_CTRLREG); writel(val, gpw->base + GEMINI_PWC_CTRLREG);
/* Now that the state machine is active, clear the IRQ */ /* Clear the IRQ */
val = readl(gpw->base + GEMINI_PWC_CTRLREG);
val |= GEMINI_CTRL_IRQ_CLR;
writel(val, gpw->base + GEMINI_PWC_CTRLREG);
/* Wait for this to clear */
val = readl(gpw->base + GEMINI_PWC_STATREG);
while (val & 0x70U)
val = readl(gpw->base + GEMINI_PWC_STATREG);
/* Clear the IRQ again */
val = readl(gpw->base + GEMINI_PWC_CTRLREG); val = readl(gpw->base + GEMINI_PWC_CTRLREG);
val |= GEMINI_CTRL_IRQ_CLR; val |= GEMINI_CTRL_IRQ_CLR;
writel(val, gpw->base + GEMINI_PWC_CTRLREG); writel(val, gpw->base + GEMINI_PWC_CTRLREG);
......
// SPDX-License-Identifier: GPL-2.0
// Copyright (c) 2017-18 Linaro Limited
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/reboot.h>
#include <linux/reboot-mode.h>
#include <linux/regmap.h>
#define PON_SOFT_RB_SPARE 0x8f
struct pm8916_pon {
struct device *dev;
struct regmap *regmap;
u32 baseaddr;
struct reboot_mode_driver reboot_mode;
};
static int pm8916_reboot_mode_write(struct reboot_mode_driver *reboot,
unsigned int magic)
{
struct pm8916_pon *pon = container_of
(reboot, struct pm8916_pon, reboot_mode);
int ret;
ret = regmap_update_bits(pon->regmap,
pon->baseaddr + PON_SOFT_RB_SPARE,
0xfc, magic << 2);
if (ret < 0)
dev_err(pon->dev, "update reboot mode bits failed\n");
return ret;
}
static int pm8916_pon_probe(struct platform_device *pdev)
{
struct pm8916_pon *pon;
int error;
pon = devm_kzalloc(&pdev->dev, sizeof(*pon), GFP_KERNEL);
if (!pon)
return -ENOMEM;
pon->dev = &pdev->dev;
pon->regmap = dev_get_regmap(pdev->dev.parent, NULL);
if (!pon->regmap) {
dev_err(&pdev->dev, "failed to locate regmap\n");
return -ENODEV;
}
error = of_property_read_u32(pdev->dev.of_node, "reg",
&pon->baseaddr);
if (error)
return error;
pon->reboot_mode.dev = &pdev->dev;
pon->reboot_mode.write = pm8916_reboot_mode_write;
error = devm_reboot_mode_register(&pdev->dev, &pon->reboot_mode);
if (error) {
dev_err(&pdev->dev, "can't register reboot mode\n");
return error;
}
platform_set_drvdata(pdev, pon);
return devm_of_platform_populate(&pdev->dev);
}
static const struct of_device_id pm8916_pon_id_table[] = {
{ .compatible = "qcom,pm8916-pon" },
{ }
};
MODULE_DEVICE_TABLE(of, pm8916_pon_id_table);
static struct platform_driver pm8916_pon_driver = {
.probe = pm8916_pon_probe,
.driver = {
.name = "pm8916-pon",
.of_match_table = of_match_ptr(pm8916_pon_id_table),
},
};
module_platform_driver(pm8916_pon_driver);
MODULE_DESCRIPTION("pm8916 Power On driver");
MODULE_LICENSE("GPL v2");
...@@ -35,6 +35,7 @@ static void vexpress_reset_do(struct device *dev, const char *what) ...@@ -35,6 +35,7 @@ static void vexpress_reset_do(struct device *dev, const char *what)
} }
static struct device *vexpress_power_off_device; static struct device *vexpress_power_off_device;
static atomic_t vexpress_restart_nb_refcnt = ATOMIC_INIT(0);
static void vexpress_power_off(void) static void vexpress_power_off(void)
{ {
...@@ -99,11 +100,14 @@ static int _vexpress_register_restart_handler(struct device *dev) ...@@ -99,11 +100,14 @@ static int _vexpress_register_restart_handler(struct device *dev)
int err; int err;
vexpress_restart_device = dev; vexpress_restart_device = dev;
if (atomic_inc_return(&vexpress_restart_nb_refcnt) == 1) {
err = register_restart_handler(&vexpress_restart_nb); err = register_restart_handler(&vexpress_restart_nb);
if (err) { if (err) {
dev_err(dev, "cannot register restart handler (err=%d)\n", err); dev_err(dev, "cannot register restart handler (err=%d)\n", err);
atomic_dec(&vexpress_restart_nb_refcnt);
return err; return err;
} }
}
device_create_file(dev, &dev_attr_active); device_create_file(dev, &dev_attr_active);
return 0; return 0;
......
...@@ -51,6 +51,7 @@ static int zx_reboot_probe(struct platform_device *pdev) ...@@ -51,6 +51,7 @@ static int zx_reboot_probe(struct platform_device *pdev)
np = of_find_compatible_node(NULL, NULL, "zte,zx296702-pcu"); np = of_find_compatible_node(NULL, NULL, "zte,zx296702-pcu");
pcu_base = of_iomap(np, 0); pcu_base = of_iomap(np, 0);
of_node_put(np);
if (!pcu_base) { if (!pcu_base) {
iounmap(base); iounmap(base);
WARN(1, "failed to map pcu_base address"); WARN(1, "failed to map pcu_base address");
......
...@@ -75,6 +75,17 @@ config BATTERY_88PM860X ...@@ -75,6 +75,17 @@ config BATTERY_88PM860X
help help
Say Y here to enable battery monitor for Marvell 88PM860x chip. Say Y here to enable battery monitor for Marvell 88PM860x chip.
config CHARGER_ADP5061
tristate "ADP5061 battery charger driver"
depends on I2C
select REGMAP_I2C
help
Say Y here to enable support for the ADP5061 standalone battery
charger.
This driver can be built as a module. If so, the module will be
called adp5061.
config BATTERY_ACT8945A config BATTERY_ACT8945A
tristate "Active-semi ACT8945A charger driver" tristate "Active-semi ACT8945A charger driver"
depends on MFD_ACT8945A || COMPILE_TEST depends on MFD_ACT8945A || COMPILE_TEST
...@@ -92,7 +103,7 @@ config BATTERY_CPCAP ...@@ -92,7 +103,7 @@ config BATTERY_CPCAP
config BATTERY_DS2760 config BATTERY_DS2760
tristate "DS2760 battery driver (HP iPAQ & others)" tristate "DS2760 battery driver (HP iPAQ & others)"
depends on W1 && W1_SLAVE_DS2760 depends on W1
help help
Say Y here to enable support for batteries with ds2760 chip. Say Y here to enable support for batteries with ds2760 chip.
...@@ -624,4 +635,14 @@ config CHARGER_RT9455 ...@@ -624,4 +635,14 @@ config CHARGER_RT9455
help help
Say Y to enable support for Richtek RT9455 battery charger. Say Y to enable support for Richtek RT9455 battery charger.
config CHARGER_CROS_USBPD
tristate "ChromeOS EC based USBPD charger"
depends on MFD_CROS_EC
default n
help
Say Y here to enable ChromeOS EC based USBPD charger
driver. This driver gets various bits of information about
what is connected to USB PD ports from the EC and converts
that into power_supply properties.
endif # POWER_SUPPLY endif # POWER_SUPPLY
...@@ -18,6 +18,7 @@ obj-$(CONFIG_WM8350_POWER) += wm8350_power.o ...@@ -18,6 +18,7 @@ obj-$(CONFIG_WM8350_POWER) += wm8350_power.o
obj-$(CONFIG_TEST_POWER) += test_power.o obj-$(CONFIG_TEST_POWER) += test_power.o
obj-$(CONFIG_BATTERY_88PM860X) += 88pm860x_battery.o obj-$(CONFIG_BATTERY_88PM860X) += 88pm860x_battery.o
obj-$(CONFIG_CHARGER_ADP5061) += adp5061.o
obj-$(CONFIG_BATTERY_ACT8945A) += act8945a_charger.o obj-$(CONFIG_BATTERY_ACT8945A) += act8945a_charger.o
obj-$(CONFIG_BATTERY_AXP20X) += axp20x_battery.o obj-$(CONFIG_BATTERY_AXP20X) += axp20x_battery.o
obj-$(CONFIG_CHARGER_AXP20X) += axp20x_ac_power.o obj-$(CONFIG_CHARGER_AXP20X) += axp20x_ac_power.o
...@@ -83,3 +84,4 @@ obj-$(CONFIG_CHARGER_TPS65090) += tps65090-charger.o ...@@ -83,3 +84,4 @@ obj-$(CONFIG_CHARGER_TPS65090) += tps65090-charger.o
obj-$(CONFIG_CHARGER_TPS65217) += tps65217_charger.o obj-$(CONFIG_CHARGER_TPS65217) += tps65217_charger.o
obj-$(CONFIG_AXP288_FUEL_GAUGE) += axp288_fuel_gauge.o obj-$(CONFIG_AXP288_FUEL_GAUGE) += axp288_fuel_gauge.o
obj-$(CONFIG_AXP288_CHARGER) += axp288_charger.o obj-$(CONFIG_AXP288_CHARGER) += axp288_charger.o
obj-$(CONFIG_CHARGER_CROS_USBPD) += cros_usbpd-charger.o
...@@ -379,15 +379,13 @@ static int ab8500_fg_is_low_curr(struct ab8500_fg *di, int curr) ...@@ -379,15 +379,13 @@ static int ab8500_fg_is_low_curr(struct ab8500_fg *di, int curr)
*/ */
static int ab8500_fg_add_cap_sample(struct ab8500_fg *di, int sample) static int ab8500_fg_add_cap_sample(struct ab8500_fg *di, int sample)
{ {
struct timespec64 ts64; time64_t now = ktime_get_boottime_seconds();
struct ab8500_fg_avg_cap *avg = &di->avg_cap; struct ab8500_fg_avg_cap *avg = &di->avg_cap;
getnstimeofday64(&ts64);
do { do {
avg->sum += sample - avg->samples[avg->pos]; avg->sum += sample - avg->samples[avg->pos];
avg->samples[avg->pos] = sample; avg->samples[avg->pos] = sample;
avg->time_stamps[avg->pos] = ts64.tv_sec; avg->time_stamps[avg->pos] = now;
avg->pos++; avg->pos++;
if (avg->pos == NBR_AVG_SAMPLES) if (avg->pos == NBR_AVG_SAMPLES)
...@@ -400,7 +398,7 @@ static int ab8500_fg_add_cap_sample(struct ab8500_fg *di, int sample) ...@@ -400,7 +398,7 @@ static int ab8500_fg_add_cap_sample(struct ab8500_fg *di, int sample)
* Check the time stamp for each sample. If too old, * Check the time stamp for each sample. If too old,
* replace with latest sample * replace with latest sample
*/ */
} while (ts64.tv_sec - VALID_CAPACITY_SEC > avg->time_stamps[avg->pos]); } while (now - VALID_CAPACITY_SEC > avg->time_stamps[avg->pos]);
avg->avg = avg->sum / avg->nbr_samples; avg->avg = avg->sum / avg->nbr_samples;
...@@ -439,14 +437,14 @@ static void ab8500_fg_clear_cap_samples(struct ab8500_fg *di) ...@@ -439,14 +437,14 @@ static void ab8500_fg_clear_cap_samples(struct ab8500_fg *di)
static void ab8500_fg_fill_cap_sample(struct ab8500_fg *di, int sample) static void ab8500_fg_fill_cap_sample(struct ab8500_fg *di, int sample)
{ {
int i; int i;
struct timespec64 ts64; time64_t now;
struct ab8500_fg_avg_cap *avg = &di->avg_cap; struct ab8500_fg_avg_cap *avg = &di->avg_cap;
getnstimeofday64(&ts64); now = ktime_get_boottime_seconds();
for (i = 0; i < NBR_AVG_SAMPLES; i++) { for (i = 0; i < NBR_AVG_SAMPLES; i++) {
avg->samples[i] = sample; avg->samples[i] = sample;
avg->time_stamps[i] = ts64.tv_sec; avg->time_stamps[i] = now;
} }
avg->pos = 0; avg->pos = 0;
......
This diff is collapsed.
...@@ -222,6 +222,7 @@ static int axp20x_usb_power_set_current_max(struct axp20x_usb_power *power, ...@@ -222,6 +222,7 @@ static int axp20x_usb_power_set_current_max(struct axp20x_usb_power *power,
case 100000: case 100000:
if (power->axp20x_id == AXP221_ID) if (power->axp20x_id == AXP221_ID)
return -EINVAL; return -EINVAL;
/* fall through */
case 500000: case 500000:
case 900000: case 900000:
val = (900000 - intval) / 400000; val = (900000 - intval) / 400000;
......
...@@ -718,7 +718,7 @@ static int charger_init_hw_regs(struct axp288_chrg_info *info) ...@@ -718,7 +718,7 @@ static int charger_init_hw_regs(struct axp288_chrg_info *info)
} }
/* Determine charge current limit */ /* Determine charge current limit */
cc = (ret & CHRG_CCCV_CC_MASK) >> CHRG_CCCV_CC_BIT_POS; cc = (val & CHRG_CCCV_CC_MASK) >> CHRG_CCCV_CC_BIT_POS;
cc = (cc * CHRG_CCCV_CC_LSB_RES) + CHRG_CCCV_CC_OFFSET; cc = (cc * CHRG_CCCV_CC_LSB_RES) + CHRG_CCCV_CC_OFFSET;
info->cc = cc; info->cc = cc;
......
...@@ -26,7 +26,6 @@ ...@@ -26,7 +26,6 @@
* http://www.ti.com/product/bq27510-g1 * http://www.ti.com/product/bq27510-g1
* http://www.ti.com/product/bq27510-g2 * http://www.ti.com/product/bq27510-g2
* http://www.ti.com/product/bq27510-g3 * http://www.ti.com/product/bq27510-g3
* http://www.ti.com/product/bq27520-g4
* http://www.ti.com/product/bq27520-g1 * http://www.ti.com/product/bq27520-g1
* http://www.ti.com/product/bq27520-g2 * http://www.ti.com/product/bq27520-g2
* http://www.ti.com/product/bq27520-g3 * http://www.ti.com/product/bq27520-g3
...@@ -40,7 +39,9 @@ ...@@ -40,7 +39,9 @@
* http://www.ti.com/product/bq27545-g1 * http://www.ti.com/product/bq27545-g1
* http://www.ti.com/product/bq27421-g1 * http://www.ti.com/product/bq27421-g1
* http://www.ti.com/product/bq27425-g1 * http://www.ti.com/product/bq27425-g1
* http://www.ti.com/product/bq27426
* http://www.ti.com/product/bq27411-g1 * http://www.ti.com/product/bq27411-g1
* http://www.ti.com/product/bq27441-g1
* http://www.ti.com/product/bq27621-g1 * http://www.ti.com/product/bq27621-g1
*/ */
......
This diff is collapsed.
This diff is collapsed.
...@@ -241,10 +241,10 @@ static int gab_probe(struct platform_device *pdev) ...@@ -241,10 +241,10 @@ static int gab_probe(struct platform_device *pdev)
struct power_supply_desc *psy_desc; struct power_supply_desc *psy_desc;
struct power_supply_config psy_cfg = {}; struct power_supply_config psy_cfg = {};
struct gab_platform_data *pdata = pdev->dev.platform_data; struct gab_platform_data *pdata = pdev->dev.platform_data;
enum power_supply_property *properties;
int ret = 0; int ret = 0;
int chan; int chan;
int index = 0; int index = ARRAY_SIZE(gab_props);
bool any = false;
adc_bat = devm_kzalloc(&pdev->dev, sizeof(*adc_bat), GFP_KERNEL); adc_bat = devm_kzalloc(&pdev->dev, sizeof(*adc_bat), GFP_KERNEL);
if (!adc_bat) { if (!adc_bat) {
...@@ -278,8 +278,6 @@ static int gab_probe(struct platform_device *pdev) ...@@ -278,8 +278,6 @@ static int gab_probe(struct platform_device *pdev)
} }
memcpy(psy_desc->properties, gab_props, sizeof(gab_props)); memcpy(psy_desc->properties, gab_props, sizeof(gab_props));
properties = (enum power_supply_property *)
((char *)psy_desc->properties + sizeof(gab_props));
/* /*
* getting channel from iio and copying the battery properties * getting channel from iio and copying the battery properties
...@@ -293,15 +291,22 @@ static int gab_probe(struct platform_device *pdev) ...@@ -293,15 +291,22 @@ static int gab_probe(struct platform_device *pdev)
adc_bat->channel[chan] = NULL; adc_bat->channel[chan] = NULL;
} else { } else {
/* copying properties for supported channels only */ /* copying properties for supported channels only */
memcpy(properties + sizeof(*(psy_desc->properties)) * index, int index2;
&gab_dyn_props[chan],
sizeof(gab_dyn_props[chan])); for (index2 = 0; index2 < index; index2++) {
index++; if (psy_desc->properties[index2] ==
gab_dyn_props[chan])
break; /* already known */
}
if (index2 == index) /* really new */
psy_desc->properties[index++] =
gab_dyn_props[chan];
any = true;
} }
} }
/* none of the channels are supported so let's bail out */ /* none of the channels are supported so let's bail out */
if (index == 0) { if (!any) {
ret = -ENODEV; ret = -ENODEV;
goto second_mem_fail; goto second_mem_fail;
} }
...@@ -312,7 +317,7 @@ static int gab_probe(struct platform_device *pdev) ...@@ -312,7 +317,7 @@ static int gab_probe(struct platform_device *pdev)
* as come channels may be not be supported by the device.So * as come channels may be not be supported by the device.So
* we need to take care of that. * we need to take care of that.
*/ */
psy_desc->num_properties = ARRAY_SIZE(gab_props) + index; psy_desc->num_properties = index;
adc_bat->psy = power_supply_register(&pdev->dev, psy_desc, &psy_cfg); adc_bat->psy = power_supply_register(&pdev->dev, psy_desc, &psy_cfg);
if (IS_ERR(adc_bat->psy)) { if (IS_ERR(adc_bat->psy)) {
......
...@@ -39,7 +39,7 @@ static int lego_ev3_battery_get_property(struct power_supply *psy, ...@@ -39,7 +39,7 @@ static int lego_ev3_battery_get_property(struct power_supply *psy,
union power_supply_propval *val) union power_supply_propval *val)
{ {
struct lego_ev3_battery *batt = power_supply_get_drvdata(psy); struct lego_ev3_battery *batt = power_supply_get_drvdata(psy);
int val2; int ret, val2;
switch (psp) { switch (psp) {
case POWER_SUPPLY_PROP_TECHNOLOGY: case POWER_SUPPLY_PROP_TECHNOLOGY:
...@@ -47,11 +47,18 @@ static int lego_ev3_battery_get_property(struct power_supply *psy, ...@@ -47,11 +47,18 @@ static int lego_ev3_battery_get_property(struct power_supply *psy,
break; break;
case POWER_SUPPLY_PROP_VOLTAGE_NOW: case POWER_SUPPLY_PROP_VOLTAGE_NOW:
/* battery voltage is iio channel * 2 + Vce of transistor */ /* battery voltage is iio channel * 2 + Vce of transistor */
iio_read_channel_processed(batt->iio_v, &val->intval); ret = iio_read_channel_processed(batt->iio_v, &val->intval);
if (ret)
return ret;
val->intval *= 2000; val->intval *= 2000;
val->intval += 200000; val->intval += 50000;
/* plus adjust for shunt resistor drop */ /* plus adjust for shunt resistor drop */
iio_read_channel_processed(batt->iio_i, &val2); ret = iio_read_channel_processed(batt->iio_i, &val2);
if (ret)
return ret;
val2 *= 1000; val2 *= 1000;
val2 /= 15; val2 /= 15;
val->intval += val2; val->intval += val2;
...@@ -64,7 +71,10 @@ static int lego_ev3_battery_get_property(struct power_supply *psy, ...@@ -64,7 +71,10 @@ static int lego_ev3_battery_get_property(struct power_supply *psy,
break; break;
case POWER_SUPPLY_PROP_CURRENT_NOW: case POWER_SUPPLY_PROP_CURRENT_NOW:
/* battery current is iio channel / 15 / 0.05 ohms */ /* battery current is iio channel / 15 / 0.05 ohms */
iio_read_channel_processed(batt->iio_i, &val->intval); ret = iio_read_channel_processed(batt->iio_i, &val->intval);
if (ret)
return ret;
val->intval *= 20000; val->intval *= 20000;
val->intval /= 15; val->intval /= 15;
break; break;
......
...@@ -372,7 +372,7 @@ static int devm_w1_max1721x_add_device(struct w1_slave *sl) ...@@ -372,7 +372,7 @@ static int devm_w1_max1721x_add_device(struct w1_slave *sl)
} }
if (!info->rsense) { if (!info->rsense) {
dev_warn(info->w1_dev, "RSenese not calibrated, set 10 mOhms!\n"); dev_warn(info->w1_dev, "RSense not calibrated, set 10 mOhms!\n");
info->rsense = 1000; /* in regs in 10^-5 */ info->rsense = 1000; /* in regs in 10^-5 */
} }
dev_info(info->w1_dev, "RSense: %d mOhms.\n", info->rsense / 100); dev_info(info->w1_dev, "RSense: %d mOhms.\n", info->rsense / 100);
......
...@@ -567,6 +567,7 @@ static int max77693_set_charge_input_threshold_volt(struct max77693_charger *chg ...@@ -567,6 +567,7 @@ static int max77693_set_charge_input_threshold_volt(struct max77693_charger *chg
case 4800000: case 4800000:
case 4900000: case 4900000:
data = (uvolt - 4700000) / 100000; data = (uvolt - 4700000) / 100000;
break;
default: default:
dev_err(chg->dev, "Wrong value for charge input voltage regulation threshold\n"); dev_err(chg->dev, "Wrong value for charge input voltage regulation threshold\n");
return -EINVAL; return -EINVAL;
......
...@@ -14,6 +14,7 @@ ...@@ -14,6 +14,7 @@
#include <linux/types.h> #include <linux/types.h>
#include <linux/init.h> #include <linux/init.h>
#include <linux/slab.h> #include <linux/slab.h>
#include <linux/delay.h>
#include <linux/device.h> #include <linux/device.h>
#include <linux/notifier.h> #include <linux/notifier.h>
#include <linux/err.h> #include <linux/err.h>
...@@ -140,8 +141,13 @@ static void power_supply_deferred_register_work(struct work_struct *work) ...@@ -140,8 +141,13 @@ static void power_supply_deferred_register_work(struct work_struct *work)
struct power_supply *psy = container_of(work, struct power_supply, struct power_supply *psy = container_of(work, struct power_supply,
deferred_register_work.work); deferred_register_work.work);
if (psy->dev.parent) if (psy->dev.parent) {
mutex_lock(&psy->dev.parent->mutex); while (!mutex_trylock(&psy->dev.parent->mutex)) {
if (psy->removing)
return;
msleep(10);
}
}
power_supply_changed(psy); power_supply_changed(psy);
...@@ -1082,6 +1088,7 @@ EXPORT_SYMBOL_GPL(devm_power_supply_register_no_ws); ...@@ -1082,6 +1088,7 @@ EXPORT_SYMBOL_GPL(devm_power_supply_register_no_ws);
void power_supply_unregister(struct power_supply *psy) void power_supply_unregister(struct power_supply *psy)
{ {
WARN_ON(atomic_dec_return(&psy->use_cnt)); WARN_ON(atomic_dec_return(&psy->use_cnt));
psy->removing = true;
cancel_work_sync(&psy->changed_work); cancel_work_sync(&psy->changed_work);
cancel_delayed_work_sync(&psy->deferred_register_work); cancel_delayed_work_sync(&psy->deferred_register_work);
sysfs_remove_link(&psy->dev.kobj, "powers"); sysfs_remove_link(&psy->dev.kobj, "powers");
......
...@@ -23,6 +23,7 @@ ...@@ -23,6 +23,7 @@
#include <linux/kernel.h> #include <linux/kernel.h>
#include <linux/module.h> #include <linux/module.h>
#include <linux/of.h> #include <linux/of.h>
#include <linux/of_device.h>
#include <linux/power/sbs-battery.h> #include <linux/power/sbs-battery.h>
#include <linux/power_supply.h> #include <linux/power_supply.h>
#include <linux/slab.h> #include <linux/slab.h>
...@@ -156,6 +157,9 @@ static enum power_supply_property sbs_properties[] = { ...@@ -156,6 +157,9 @@ static enum power_supply_property sbs_properties[] = {
POWER_SUPPLY_PROP_MODEL_NAME POWER_SUPPLY_PROP_MODEL_NAME
}; };
/* Supports special manufacturer commands from TI BQ20Z75 IC. */
#define SBS_FLAGS_TI_BQ20Z75 BIT(0)
struct sbs_info { struct sbs_info {
struct i2c_client *client; struct i2c_client *client;
struct power_supply *power_supply; struct power_supply *power_supply;
...@@ -168,6 +172,7 @@ struct sbs_info { ...@@ -168,6 +172,7 @@ struct sbs_info {
u32 poll_retry_count; u32 poll_retry_count;
struct delayed_work work; struct delayed_work work;
struct mutex mode_lock; struct mutex mode_lock;
u32 flags;
}; };
static char model_name[I2C_SMBUS_BLOCK_MAX + 1]; static char model_name[I2C_SMBUS_BLOCK_MAX + 1];
...@@ -315,17 +320,41 @@ static int sbs_status_correct(struct i2c_client *client, int *intval) ...@@ -315,17 +320,41 @@ static int sbs_status_correct(struct i2c_client *client, int *intval)
static int sbs_get_battery_presence_and_health( static int sbs_get_battery_presence_and_health(
struct i2c_client *client, enum power_supply_property psp, struct i2c_client *client, enum power_supply_property psp,
union power_supply_propval *val) union power_supply_propval *val)
{
int ret;
if (psp == POWER_SUPPLY_PROP_PRESENT) {
/* Dummy command; if it succeeds, battery is present. */
ret = sbs_read_word_data(client, sbs_data[REG_STATUS].addr);
if (ret < 0)
val->intval = 0; /* battery disconnected */
else
val->intval = 1; /* battery present */
} else { /* POWER_SUPPLY_PROP_HEALTH */
/* SBS spec doesn't have a general health command. */
val->intval = POWER_SUPPLY_HEALTH_UNKNOWN;
}
return 0;
}
static int sbs_get_ti_battery_presence_and_health(
struct i2c_client *client, enum power_supply_property psp,
union power_supply_propval *val)
{ {
s32 ret; s32 ret;
/* /*
* Write to ManufacturerAccess with ManufacturerAccess command * Write to ManufacturerAccess with ManufacturerAccess command
* and then read the status. Do not check for error on the write * and then read the status.
* since not all batteries implement write access to this command,
* while others mandate it.
*/ */
sbs_write_word_data(client, sbs_data[REG_MANUFACTURER_DATA].addr, ret = sbs_write_word_data(client, sbs_data[REG_MANUFACTURER_DATA].addr,
MANUFACTURER_ACCESS_STATUS); MANUFACTURER_ACCESS_STATUS);
if (ret < 0) {
if (psp == POWER_SUPPLY_PROP_PRESENT)
val->intval = 0; /* battery removed */
return ret;
}
ret = sbs_read_word_data(client, sbs_data[REG_MANUFACTURER_DATA].addr); ret = sbs_read_word_data(client, sbs_data[REG_MANUFACTURER_DATA].addr);
if (ret < 0) { if (ret < 0) {
...@@ -600,7 +629,12 @@ static int sbs_get_property(struct power_supply *psy, ...@@ -600,7 +629,12 @@ static int sbs_get_property(struct power_supply *psy,
switch (psp) { switch (psp) {
case POWER_SUPPLY_PROP_PRESENT: case POWER_SUPPLY_PROP_PRESENT:
case POWER_SUPPLY_PROP_HEALTH: case POWER_SUPPLY_PROP_HEALTH:
ret = sbs_get_battery_presence_and_health(client, psp, val); if (client->flags & SBS_FLAGS_TI_BQ20Z75)
ret = sbs_get_ti_battery_presence_and_health(client,
psp, val);
else
ret = sbs_get_battery_presence_and_health(client, psp,
val);
if (psp == POWER_SUPPLY_PROP_PRESENT) if (psp == POWER_SUPPLY_PROP_PRESENT)
return 0; return 0;
break; break;
...@@ -806,6 +840,7 @@ static int sbs_probe(struct i2c_client *client, ...@@ -806,6 +840,7 @@ static int sbs_probe(struct i2c_client *client,
if (!chip) if (!chip)
return -ENOMEM; return -ENOMEM;
chip->flags = (u32)(uintptr_t)of_device_get_match_data(&client->dev);
chip->client = client; chip->client = client;
chip->enable_detection = false; chip->enable_detection = false;
psy_cfg.of_node = client->dev.of_node; psy_cfg.of_node = client->dev.of_node;
...@@ -911,16 +946,19 @@ static int sbs_suspend(struct device *dev) ...@@ -911,16 +946,19 @@ static int sbs_suspend(struct device *dev)
{ {
struct i2c_client *client = to_i2c_client(dev); struct i2c_client *client = to_i2c_client(dev);
struct sbs_info *chip = i2c_get_clientdata(client); struct sbs_info *chip = i2c_get_clientdata(client);
int ret;
if (chip->poll_time > 0) if (chip->poll_time > 0)
cancel_delayed_work_sync(&chip->work); cancel_delayed_work_sync(&chip->work);
/* if (chip->flags & SBS_FLAGS_TI_BQ20Z75) {
* Write to manufacturer access with sleep command. /* Write to manufacturer access with sleep command. */
* Support is manufacturer dependend, so ignore errors. ret = sbs_write_word_data(client,
*/ sbs_data[REG_MANUFACTURER_DATA].addr,
sbs_write_word_data(client, sbs_data[REG_MANUFACTURER_DATA].addr,
MANUFACTURER_ACCESS_SLEEP); MANUFACTURER_ACCESS_SLEEP);
if (chip->is_present && ret < 0)
return ret;
}
return 0; return 0;
} }
...@@ -941,7 +979,10 @@ MODULE_DEVICE_TABLE(i2c, sbs_id); ...@@ -941,7 +979,10 @@ MODULE_DEVICE_TABLE(i2c, sbs_id);
static const struct of_device_id sbs_dt_ids[] = { static const struct of_device_id sbs_dt_ids[] = {
{ .compatible = "sbs,sbs-battery" }, { .compatible = "sbs,sbs-battery" },
{ .compatible = "ti,bq20z75" }, {
.compatible = "ti,bq20z75",
.data = (void *)SBS_FLAGS_TI_BQ20Z75,
},
{ } { }
}; };
MODULE_DEVICE_TABLE(of, sbs_dt_ids); MODULE_DEVICE_TABLE(of, sbs_dt_ids);
......
/* // SPDX-License-Identifier: GPL-2.0
* Battery charger driver for TI's tps65217 // Battery charger driver for TI's tps65217
* //
* Copyright (c) 2015, Collabora Ltd. // Copyright (C) 2015 Collabora Ltd.
// Author: Enric Balletbo i Serra <enric.balletbo@collabora.com>
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/* /*
* Battery charger driver for TI's tps65217 * Battery charger driver for TI's tps65217
......
...@@ -230,7 +230,8 @@ static irqreturn_t wm8350_charger_handler(int irq, void *data) ...@@ -230,7 +230,8 @@ static irqreturn_t wm8350_charger_handler(int irq, void *data)
case WM8350_IRQ_EXT_USB_FB: case WM8350_IRQ_EXT_USB_FB:
case WM8350_IRQ_EXT_WALL_FB: case WM8350_IRQ_EXT_WALL_FB:
wm8350_charger_config(wm8350, policy); wm8350_charger_config(wm8350, policy);
case WM8350_IRQ_EXT_BAT_FB: /* Fall through */ /* Fall through */
case WM8350_IRQ_EXT_BAT_FB:
power_supply_changed(power->battery); power_supply_changed(power->battery);
power_supply_changed(power->usb); power_supply_changed(power->usb);
power_supply_changed(power->ac); power_supply_changed(power->ac);
......
...@@ -100,18 +100,6 @@ config W1_SLAVE_DS2438 ...@@ -100,18 +100,6 @@ config W1_SLAVE_DS2438
Say Y here if you want to use a 1-wire Say Y here if you want to use a 1-wire
DS2438 Smart Battery Monitor device support DS2438 Smart Battery Monitor device support
config W1_SLAVE_DS2760
tristate "Dallas 2760 battery monitor chip (HP iPAQ & others)"
help
If you enable this you will have the DS2760 battery monitor
chip support.
The battery monitor chip is used in many batteries/devices
as the one who is responsible for charging/discharging/monitoring
Li+ batteries.
If you are unsure, say N.
config W1_SLAVE_DS2780 config W1_SLAVE_DS2780
tristate "Dallas 2780 battery monitor chip" tristate "Dallas 2780 battery monitor chip"
help help
......
...@@ -14,7 +14,6 @@ obj-$(CONFIG_W1_SLAVE_DS2431) += w1_ds2431.o ...@@ -14,7 +14,6 @@ obj-$(CONFIG_W1_SLAVE_DS2431) += w1_ds2431.o
obj-$(CONFIG_W1_SLAVE_DS2805) += w1_ds2805.o obj-$(CONFIG_W1_SLAVE_DS2805) += w1_ds2805.o
obj-$(CONFIG_W1_SLAVE_DS2433) += w1_ds2433.o obj-$(CONFIG_W1_SLAVE_DS2433) += w1_ds2433.o
obj-$(CONFIG_W1_SLAVE_DS2438) += w1_ds2438.o obj-$(CONFIG_W1_SLAVE_DS2438) += w1_ds2438.o
obj-$(CONFIG_W1_SLAVE_DS2760) += w1_ds2760.o
obj-$(CONFIG_W1_SLAVE_DS2780) += w1_ds2780.o obj-$(CONFIG_W1_SLAVE_DS2780) += w1_ds2780.o
obj-$(CONFIG_W1_SLAVE_DS2781) += w1_ds2781.o obj-$(CONFIG_W1_SLAVE_DS2781) += w1_ds2781.o
obj-$(CONFIG_W1_SLAVE_DS28E04) += w1_ds28e04.o obj-$(CONFIG_W1_SLAVE_DS28E04) += w1_ds28e04.o
......
/*
* 1-Wire implementation for the ds2760 chip
*
* Copyright © 2004-2005, Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>
*
* Use consistent with the GNU GPL is permitted,
* provided that this copyright notice is
* preserved in its entirety in all copies and derived works.
*
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/device.h>
#include <linux/types.h>
#include <linux/platform_device.h>
#include <linux/mutex.h>
#include <linux/idr.h>
#include <linux/gfp.h>
#include <linux/w1.h>
#include "w1_ds2760.h"
#define W1_FAMILY_DS2760 0x30
static int w1_ds2760_io(struct device *dev, char *buf, int addr, size_t count,
int io)
{
struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
if (!dev)
return 0;
mutex_lock(&sl->master->bus_mutex);
if (addr > DS2760_DATA_SIZE || addr < 0) {
count = 0;
goto out;
}
if (addr + count > DS2760_DATA_SIZE)
count = DS2760_DATA_SIZE - addr;
if (!w1_reset_select_slave(sl)) {
if (!io) {
w1_write_8(sl->master, W1_DS2760_READ_DATA);
w1_write_8(sl->master, addr);
count = w1_read_block(sl->master, buf, count);
} else {
w1_write_8(sl->master, W1_DS2760_WRITE_DATA);
w1_write_8(sl->master, addr);
w1_write_block(sl->master, buf, count);
/* XXX w1_write_block returns void, not n_written */
}
}
out:
mutex_unlock(&sl->master->bus_mutex);
return count;
}
int w1_ds2760_read(struct device *dev, char *buf, int addr, size_t count)
{
return w1_ds2760_io(dev, buf, addr, count, 0);
}
EXPORT_SYMBOL(w1_ds2760_read);
int w1_ds2760_write(struct device *dev, char *buf, int addr, size_t count)
{
return w1_ds2760_io(dev, buf, addr, count, 1);
}
EXPORT_SYMBOL(w1_ds2760_write);
static int w1_ds2760_eeprom_cmd(struct device *dev, int addr, int cmd)
{
struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
if (!dev)
return -EINVAL;
mutex_lock(&sl->master->bus_mutex);
if (w1_reset_select_slave(sl) == 0) {
w1_write_8(sl->master, cmd);
w1_write_8(sl->master, addr);
}
mutex_unlock(&sl->master->bus_mutex);
return 0;
}
int w1_ds2760_store_eeprom(struct device *dev, int addr)
{
return w1_ds2760_eeprom_cmd(dev, addr, W1_DS2760_COPY_DATA);
}
EXPORT_SYMBOL(w1_ds2760_store_eeprom);
int w1_ds2760_recall_eeprom(struct device *dev, int addr)
{
return w1_ds2760_eeprom_cmd(dev, addr, W1_DS2760_RECALL_DATA);
}
EXPORT_SYMBOL(w1_ds2760_recall_eeprom);
static ssize_t w1_slave_read(struct file *filp, struct kobject *kobj,
struct bin_attribute *bin_attr, char *buf,
loff_t off, size_t count)
{
struct device *dev = container_of(kobj, struct device, kobj);
return w1_ds2760_read(dev, buf, off, count);
}
static BIN_ATTR_RO(w1_slave, DS2760_DATA_SIZE);
static struct bin_attribute *w1_ds2760_bin_attrs[] = {
&bin_attr_w1_slave,
NULL,
};
static const struct attribute_group w1_ds2760_group = {
.bin_attrs = w1_ds2760_bin_attrs,
};
static const struct attribute_group *w1_ds2760_groups[] = {
&w1_ds2760_group,
NULL,
};
static int w1_ds2760_add_slave(struct w1_slave *sl)
{
int ret;
struct platform_device *pdev;
pdev = platform_device_alloc("ds2760-battery", PLATFORM_DEVID_AUTO);
if (!pdev)
return -ENOMEM;
pdev->dev.parent = &sl->dev;
ret = platform_device_add(pdev);
if (ret)
goto pdev_add_failed;
dev_set_drvdata(&sl->dev, pdev);
return 0;
pdev_add_failed:
platform_device_put(pdev);
return ret;
}
static void w1_ds2760_remove_slave(struct w1_slave *sl)
{
struct platform_device *pdev = dev_get_drvdata(&sl->dev);
platform_device_unregister(pdev);
}
static struct w1_family_ops w1_ds2760_fops = {
.add_slave = w1_ds2760_add_slave,
.remove_slave = w1_ds2760_remove_slave,
.groups = w1_ds2760_groups,
};
static struct w1_family w1_ds2760_family = {
.fid = W1_FAMILY_DS2760,
.fops = &w1_ds2760_fops,
};
module_w1_family(w1_ds2760_family);
MODULE_AUTHOR("Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>");
MODULE_DESCRIPTION("1-wire Driver Dallas 2760 battery monitor chip");
MODULE_LICENSE("GPL");
MODULE_ALIAS("w1-family-" __stringify(W1_FAMILY_DS2760));
/*
* 1-Wire implementation for the ds2760 chip
*
* Copyright © 2004-2005, Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>
*
* Use consistent with the GNU GPL is permitted,
* provided that this copyright notice is
* preserved in its entirety in all copies and derived works.
*
*/
#ifndef __w1_ds2760_h__
#define __w1_ds2760_h__
/* Known commands to the DS2760 chip */
#define W1_DS2760_SWAP 0xAA
#define W1_DS2760_READ_DATA 0x69
#define W1_DS2760_WRITE_DATA 0x6C
#define W1_DS2760_COPY_DATA 0x48
#define W1_DS2760_RECALL_DATA 0xB8
#define W1_DS2760_LOCK 0x6A
/* Number of valid register addresses */
#define DS2760_DATA_SIZE 0x40
#define DS2760_PROTECTION_REG 0x00
#define DS2760_STATUS_REG 0x01
#define DS2760_STATUS_IE (1 << 2)
#define DS2760_STATUS_SWEN (1 << 3)
#define DS2760_STATUS_RNAOP (1 << 4)
#define DS2760_STATUS_PMOD (1 << 5)
#define DS2760_EEPROM_REG 0x07
#define DS2760_SPECIAL_FEATURE_REG 0x08
#define DS2760_VOLTAGE_MSB 0x0c
#define DS2760_VOLTAGE_LSB 0x0d
#define DS2760_CURRENT_MSB 0x0e
#define DS2760_CURRENT_LSB 0x0f
#define DS2760_CURRENT_ACCUM_MSB 0x10
#define DS2760_CURRENT_ACCUM_LSB 0x11
#define DS2760_TEMP_MSB 0x18
#define DS2760_TEMP_LSB 0x19
#define DS2760_EEPROM_BLOCK0 0x20
#define DS2760_ACTIVE_FULL 0x20
#define DS2760_EEPROM_BLOCK1 0x30
#define DS2760_STATUS_WRITE_REG 0x31
#define DS2760_RATED_CAPACITY 0x32
#define DS2760_CURRENT_OFFSET_BIAS 0x33
#define DS2760_ACTIVE_EMPTY 0x3b
extern int w1_ds2760_read(struct device *dev, char *buf, int addr,
size_t count);
extern int w1_ds2760_write(struct device *dev, char *buf, int addr,
size_t count);
extern int w1_ds2760_store_eeprom(struct device *dev, int addr);
extern int w1_ds2760_recall_eeprom(struct device *dev, int addr);
#endif /* !__w1_ds2760_h__ */
...@@ -26,6 +26,7 @@ ...@@ -26,6 +26,7 @@
#include <linux/kthread.h> #include <linux/kthread.h>
#include <linux/freezer.h> #include <linux/freezer.h>
#include <linux/hwmon.h> #include <linux/hwmon.h>
#include <linux/of.h>
#include <linux/atomic.h> #include <linux/atomic.h>
...@@ -686,6 +687,8 @@ static int __w1_attach_slave_device(struct w1_slave *sl) ...@@ -686,6 +687,8 @@ static int __w1_attach_slave_device(struct w1_slave *sl)
sl->dev.bus = &w1_bus_type; sl->dev.bus = &w1_bus_type;
sl->dev.release = &w1_slave_release; sl->dev.release = &w1_slave_release;
sl->dev.groups = w1_slave_groups; sl->dev.groups = w1_slave_groups;
sl->dev.of_node = of_find_matching_node(sl->master->dev.of_node,
sl->family->of_match_table);
dev_set_name(&sl->dev, "%02x-%012llx", dev_set_name(&sl->dev, "%02x-%012llx",
(unsigned int) sl->reg_num.family, (unsigned int) sl->reg_num.family,
......
...@@ -269,6 +269,7 @@ struct power_supply { ...@@ -269,6 +269,7 @@ struct power_supply {
spinlock_t changed_lock; spinlock_t changed_lock;
bool changed; bool changed;
bool initialized; bool initialized;
bool removing;
atomic_t use_cnt; atomic_t use_cnt;
#ifdef CONFIG_THERMAL #ifdef CONFIG_THERMAL
struct thermal_zone_device *tzd; struct thermal_zone_device *tzd;
......
...@@ -274,6 +274,8 @@ struct w1_family { ...@@ -274,6 +274,8 @@ struct w1_family {
struct w1_family_ops *fops; struct w1_family_ops *fops;
const struct of_device_id *of_match_table;
atomic_t refcnt; atomic_t refcnt;
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment