Commit c217cf81 authored by Anson Huang's avatar Anson Huang Committed by Rob Herring

dt-bindings: i2c: Convert imx lpi2c to json-schema

Convert the i.MX LPI2C binding to DT schema format using json-schema
Signed-off-by: default avatarAnson Huang <Anson.Huang@nxp.com>
Link: https://lore.kernel.org/r/1591235358-15516-2-git-send-email-Anson.Huang@nxp.comSigned-off-by: default avatarRob Herring <robh@kernel.org>
parent 67a69dab
* Freescale Low Power Inter IC (LPI2C) for i.MX
Required properties:
- compatible :
- "fsl,imx7ulp-lpi2c" for LPI2C compatible with the one integrated on i.MX7ULP soc
- "fsl,imx8qxp-lpi2c" for LPI2C compatible with the one integrated on i.MX8QXP soc
- "fsl,imx8qm-lpi2c" for LPI2C compatible with the one integrated on i.MX8QM soc
- reg : address and length of the lpi2c master registers
- interrupts : lpi2c interrupt
- clocks : lpi2c clock specifier
Examples:
lpi2c7: lpi2c7@40a50000 {
compatible = "fsl,imx7ulp-lpi2c";
reg = <0x40A50000 0x10000>;
interrupt-parent = <&intc>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7ULP_CLK_LPI2C7>;
};
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/i2c/i2c-imx-lpi2c.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Freescale Low Power Inter IC (LPI2C) for i.MX
maintainers:
- Anson Huang <Anson.Huang@nxp.com>
properties:
compatible:
enum:
- fsl,imx7ulp-lpi2c
- fsl,imx8qxp-lpi2c
- fsl,imx8qm-lpi2c
reg:
maxItems: 1
interrupts:
maxItems: 1
clocks:
maxItems: 1
required:
- compatible
- reg
- interrupts
- clocks
additionalProperties: false
examples:
- |
#include <dt-bindings/clock/imx7ulp-clock.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
lpi2c7@40a50000 {
compatible = "fsl,imx7ulp-lpi2c";
reg = <0x40A50000 0x10000>;
interrupt-parent = <&intc>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7ULP_CLK_LPI2C7>;
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment