Commit c2499d68 authored by Arnd Bergmann's avatar Arnd Bergmann

Merge tag 'renesas-rcar-sysc-for-v4.7' of...

Merge tag 'renesas-rcar-sysc-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Pull "Renesas ARM Based SoC R-Car SYSC Updates for v4.7" from Simon Horman:

* Add DT bindings for the R-Car System Controller.
  An implementation is intended to follow.

* tag 'renesas-rcar-sysc-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  soc: renesas: Add r8a7795 SYSC PM Domain Binding Definitions
  soc: renesas: Add r8a7794 SYSC PM Domain Binding Definitions
  soc: renesas: Add r8a7793 SYSC PM Domain Binding Definitions
  soc: renesas: Add r8a7791 SYSC PM Domain Binding Definitions
  soc: renesas: Add r8a7790 SYSC PM Domain Binding Definitions
  soc: renesas: Add r8a7779 SYSC PM Domain Binding Definitions
  PM / Domains: Add DT bindings for the R-Car System Controller
parents 62547ba3 839a04d8
DT bindings for the Renesas R-Car System Controller
== System Controller Node ==
The R-Car System Controller provides power management for the CPU cores and
various coprocessors.
Required properties:
- compatible: Must contain exactly one of the following:
- "renesas,r8a7779-sysc" (R-Car H1)
- "renesas,r8a7790-sysc" (R-Car H2)
- "renesas,r8a7791-sysc" (R-Car M2-W)
- "renesas,r8a7792-sysc" (R-Car V2H)
- "renesas,r8a7793-sysc" (R-Car M2-N)
- "renesas,r8a7794-sysc" (R-Car E2)
- "renesas,r8a7795-sysc" (R-Car H3)
- reg: Address start and address range for the device.
- #power-domain-cells: Must be 1.
Example:
sysc: system-controller@e6180000 {
compatible = "renesas,r8a7791-sysc";
reg = <0 0xe6180000 0 0x0200>;
#power-domain-cells = <1>;
};
== PM Domain Consumers ==
Devices residing in a power area must refer to that power area, as documented
by the generic PM domain bindings in
Documentation/devicetree/bindings/power/power_domain.txt.
Required properties:
- power-domains: A phandle and symbolic PM domain specifier, as defined in
<dt-bindings/power/r8a77*-sysc.h>.
Example:
L2_CA15: cache-controller@0 {
compatible = "cache";
power-domains = <&sysc R8A7791_PD_CA15_SCU>;
cache-unified;
cache-level = <2>;
};
/*
* Copyright (C) 2016 Glider bvba
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*/
#ifndef __DT_BINDINGS_POWER_R8A7779_SYSC_H__
#define __DT_BINDINGS_POWER_R8A7779_SYSC_H__
/*
* These power domain indices match the numbers of the interrupt bits
* representing the power areas in the various Interrupt Registers
* (e.g. SYSCISR, Interrupt Status Register)
*/
#define R8A7779_PD_ARM1 1
#define R8A7779_PD_ARM2 2
#define R8A7779_PD_ARM3 3
#define R8A7779_PD_SGX 20
#define R8A7779_PD_VDP 21
#define R8A7779_PD_IMP 24
/* Always-on power area */
#define R8A7779_PD_ALWAYS_ON 32
#endif /* __DT_BINDINGS_POWER_R8A7779_SYSC_H__ */
/*
* Copyright (C) 2016 Glider bvba
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*/
#ifndef __DT_BINDINGS_POWER_R8A7790_SYSC_H__
#define __DT_BINDINGS_POWER_R8A7790_SYSC_H__
/*
* These power domain indices match the numbers of the interrupt bits
* representing the power areas in the various Interrupt Registers
* (e.g. SYSCISR, Interrupt Status Register)
*/
#define R8A7790_PD_CA15_CPU0 0
#define R8A7790_PD_CA15_CPU1 1
#define R8A7790_PD_CA15_CPU2 2
#define R8A7790_PD_CA15_CPU3 3
#define R8A7790_PD_CA7_CPU0 5
#define R8A7790_PD_CA7_CPU1 6
#define R8A7790_PD_CA7_CPU2 7
#define R8A7790_PD_CA7_CPU3 8
#define R8A7790_PD_CA15_SCU 12
#define R8A7790_PD_SH_4A 16
#define R8A7790_PD_RGX 20
#define R8A7790_PD_CA7_SCU 21
#define R8A7790_PD_IMP 24
/* Always-on power area */
#define R8A7790_PD_ALWAYS_ON 32
#endif /* __DT_BINDINGS_POWER_R8A7790_SYSC_H__ */
/*
* Copyright (C) 2016 Glider bvba
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*/
#ifndef __DT_BINDINGS_POWER_R8A7791_SYSC_H__
#define __DT_BINDINGS_POWER_R8A7791_SYSC_H__
/*
* These power domain indices match the numbers of the interrupt bits
* representing the power areas in the various Interrupt Registers
* (e.g. SYSCISR, Interrupt Status Register)
*/
#define R8A7791_PD_CA15_CPU0 0
#define R8A7791_PD_CA15_CPU1 1
#define R8A7791_PD_CA15_SCU 12
#define R8A7791_PD_SH_4A 16
#define R8A7791_PD_SGX 20
/* Always-on power area */
#define R8A7791_PD_ALWAYS_ON 32
#endif /* __DT_BINDINGS_POWER_R8A7791_SYSC_H__ */
/*
* Copyright (C) 2016 Glider bvba
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*/
#ifndef __DT_BINDINGS_POWER_R8A7793_SYSC_H__
#define __DT_BINDINGS_POWER_R8A7793_SYSC_H__
/*
* These power domain indices match the numbers of the interrupt bits
* representing the power areas in the various Interrupt Registers
* (e.g. SYSCISR, Interrupt Status Register)
*
* Note that R-Car M2-N is identical to R-Car M2-W w.r.t. power domains.
*/
#define R8A7793_PD_CA15_CPU0 0
#define R8A7793_PD_CA15_CPU1 1
#define R8A7793_PD_CA15_SCU 12
#define R8A7793_PD_SH_4A 16
#define R8A7793_PD_SGX 20
/* Always-on power area */
#define R8A7793_PD_ALWAYS_ON 32
#endif /* __DT_BINDINGS_POWER_R8A7793_SYSC_H__ */
/*
* Copyright (C) 2016 Glider bvba
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*/
#ifndef __DT_BINDINGS_POWER_R8A7794_SYSC_H__
#define __DT_BINDINGS_POWER_R8A7794_SYSC_H__
/*
* These power domain indices match the numbers of the interrupt bits
* representing the power areas in the various Interrupt Registers
* (e.g. SYSCISR, Interrupt Status Register)
*/
#define R8A7794_PD_CA7_CPU0 5
#define R8A7794_PD_CA7_CPU1 6
#define R8A7794_PD_SH_4A 16
#define R8A7794_PD_SGX 20
#define R8A7794_PD_CA7_SCU 21
/* Always-on power area */
#define R8A7794_PD_ALWAYS_ON 32
#endif /* __DT_BINDINGS_POWER_R8A7794_SYSC_H__ */
/*
* Copyright (C) 2016 Glider bvba
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*/
#ifndef __DT_BINDINGS_POWER_R8A7795_SYSC_H__
#define __DT_BINDINGS_POWER_R8A7795_SYSC_H__
/*
* These power domain indices match the numbers of the interrupt bits
* representing the power areas in the various Interrupt Registers
* (e.g. SYSCISR, Interrupt Status Register)
*/
#define R8A7795_PD_CA57_CPU0 0
#define R8A7795_PD_CA57_CPU1 1
#define R8A7795_PD_CA57_CPU2 2
#define R8A7795_PD_CA57_CPU3 3
#define R8A7795_PD_CA53_CPU0 5
#define R8A7795_PD_CA53_CPU1 6
#define R8A7795_PD_CA53_CPU2 7
#define R8A7795_PD_CA53_CPU3 8
#define R8A7795_PD_A3VP 9
#define R8A7795_PD_CA57_SCU 12
#define R8A7795_PD_CR7 13
#define R8A7795_PD_A3VC 14
#define R8A7795_PD_3DG_A 17
#define R8A7795_PD_3DG_B 18
#define R8A7795_PD_3DG_C 19
#define R8A7795_PD_3DG_D 20
#define R8A7795_PD_CA53_SCU 21
#define R8A7795_PD_3DG_E 22
#define R8A7795_PD_A3IR 24
#define R8A7795_PD_A2VC0 25
#define R8A7795_PD_A2VC1 26
/* Always-on power area */
#define R8A7795_PD_ALWAYS_ON 32
#endif /* __DT_BINDINGS_POWER_R8A7795_SYSC_H__ */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment