Merge tag 'mvebu' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC updates for Marvell mvebu/kirkwood from Olof Johansson:
 "This is a branch with updates for Marvell's mvebu/kirkwood platforms.
  They came in late-ish, and were heavily interdependent such that it
  didn't make sense to split them up across the cross-platform topic
  branches.  So here they are (for the second release in a row) in a
  branch on their own."

* tag 'mvebu' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (88 commits)
  arm: l2x0: add aurora related properties to OF binding
  arm: mvebu: add Aurora L2 Cache Controller to the DT
  arm: mvebu: add L2 cache support
  dma: mv_xor: fix error handling path
  dma: mv_xor: fix error checking of irq_of_parse_and_map()
  dma: mv_xor: use request_irq() instead of devm_request_irq()
  dma: mv_xor: clear the window override control registers
  arm: mvebu: fix address decoding armada_cfg_base() function
  ARM: mvebu: update defconfig with I2C and RTC support
  ARM: mvebu: Add SATA support for OpenBlocks AX3-4
  ARM: mvebu: Add support for the RTC in OpenBlocks AX3-4
  ARM: mvebu: Add support for I2C on OpenBlocks AX3-4
  ARM: mvebu: Add support for I2C controllers in Armada 370/XP
  arm: mvebu: Add hardware I/O Coherency support
  arm: plat-orion: Add coherency attribute when setup mbus target
  arm: dma mapping: Export a dma ops function arm_dma_set_mask
  arm: mvebu: Add SMP support for Armada XP
  arm: mm: Add support for PJ4B cpu and init routines
  arm: mvebu: Add IPI support via doorbells
  arm: mvebu: Add initial support for power managmement service unit
  ...

Documentation/devicetree/bindings/arm/armada-370-xp-mpic.txt

@@ -6,9 +6,15 @@ Required properties:
 - interrupt-controller: Identifies the node as an interrupt controller.
 - #interrupt-cells: The number of cells to define the interrupts. Should be 1.
   The cell is the IRQ number
+
 - reg: Should contain PMIC registers location and length. First pair
   for the main interrupt registers, second pair for the per-CPU
-  interrupt registers
+  interrupt registers. For this last pair, to be compliant with SMP
+  support, the "virtual" must be use (For the record, these registers
+  automatically map to the interrupt controller registers of the
+  current CPU)
+
+
 
 Example:
 
@@ -18,6 +24,6 @@ Example:
               #address-cells = <1>;
               #size-cells = <1>;
               interrupt-controller;
-              reg = <0xd0020000 0x1000>,
-                    <0xd0021000 0x1000>;
+              reg = <0xd0020a00 0x1d0>,
+                    <0xd0021070 0x58>;
         };

Documentation/devicetree/bindings/arm/armada-370-xp-pmsu.txt

+Power Management Service Unit(PMSU)
+-----------------------------------
+Available on Marvell SOCs: Armada 370 and Armada XP
+
+Required properties:
+
+- compatible: "marvell,armada-370-xp-pmsu"
+
+- reg: Should contain PMSU registers location and length. First pair
+  for the per-CPU SW Reset Control registers, second pair for the
+  Power Management Service Unit.
+
+Example:
+
+armada-370-xp-pmsu@d0022000 {
+	compatible = "marvell,armada-370-xp-pmsu";
+	reg = <0xd0022100 0x430>,
+	      <0xd0020800 0x20>;
+};
+

Documentation/devicetree/bindings/arm/armada-370-xp-timer.txt

@@ -5,6 +5,7 @@ Required properties:
 - compatible: Should be "marvell,armada-370-xp-timer"
 - interrupts: Should contain the list of Global Timer interrupts
 - reg: Should contain the base address of the Global Timer registers
+- clocks: clock driving the timer hardware
 
 Optional properties:
 - marvell,timer-25Mhz: Tells whether the Global timer supports the 25

Documentation/devicetree/bindings/arm/coherency-fabric.txt

+Coherency fabric
+----------------
+Available on Marvell SOCs: Armada 370 and Armada XP
+
+Required properties:
+
+- compatible: "marvell,coherency-fabric"
+
+- reg: Should contain coherency fabric registers location and
+  length. First pair for the coherency fabric registers, second pair
+  for the per-CPU fabric registers registers.
+
+Example:
+
+coherency-fabric@d0020200 {
+	compatible = "marvell,coherency-fabric";
+	reg = <0xd0020200 0xb0>,
+		<0xd0021810 0x1c>;
+
+};
+

Documentation/devicetree/bindings/arm/l2cc.txt

@@ -10,6 +10,12 @@ Required properties:
 	"arm,pl310-cache"
 	"arm,l220-cache"
 	"arm,l210-cache"
+	"marvell,aurora-system-cache": Marvell Controller designed to be
+     compatible with the ARM one, with system cache mode (meaning
+     maintenance operations on L1 are broadcasted to the L2 and L2
+     performs the same operation).
+	"marvell,"aurora-outer-cache: Marvell Controller designed to be
+	 compatible with the ARM one with outer cache mode.
 - cache-unified : Specifies the cache is a unified cache.
 - cache-level : Should be set to 2 for a level 2 cache.
 - reg : Physical base address and size of cache controller's memory mapped
@@ -29,6 +35,9 @@ Optional properties:
   filter. Addresses in the filter window are directed to the M1 port. Other
   addresses will go to the M0 port.
 - interrupts : 1 combined interrupt.
+- cache-id-part: cache id part number to be used if it is not present
+  on hardware
+- wt-override: If present then L2 is forced to Write through mode
 
 Example:
 

Documentation/devicetree/bindings/clock/mvebu-core-clock.txt

+* Core Clock bindings for Marvell MVEBU SoCs
+
+Marvell MVEBU SoCs usually allow to determine core clock frequencies by
+reading the Sample-At-Reset (SAR) register. The core clock consumer should
+specify the desired clock by having the clock ID in its "clocks" phandle cell.
+
+The following is a list of provided IDs and clock names on Armada 370/XP:
+ 0 = tclk    (Internal Bus clock)
+ 1 = cpuclk  (CPU clock)
+ 2 = nbclk   (L2 Cache clock)
+ 3 = hclk    (DRAM control clock)
+ 4 = dramclk (DDR clock)
+
+The following is a list of provided IDs and clock names on Kirkwood and Dove:
+ 0 = tclk   (Internal Bus clock)
+ 1 = cpuclk (CPU0 clock)
+ 2 = l2clk  (L2 Cache clock derived from CPU0 clock)
+ 3 = ddrclk (DDR controller clock derived from CPU0 clock)
+
+Required properties:
+- compatible : shall be one of the following:
+	"marvell,armada-370-core-clock" - For Armada 370 SoC core clocks
+	"marvell,armada-xp-core-clock" - For Armada XP SoC core clocks
+	"marvell,dove-core-clock" - for Dove SoC core clocks
+	"marvell,kirkwood-core-clock" - for Kirkwood SoC (except mv88f6180)
+	"marvell,mv88f6180-core-clock" - for Kirkwood MV88f6180 SoC
+- reg : shall be the register address of the Sample-At-Reset (SAR) register
+- #clock-cells : from common clock binding; shall be set to 1
+
+Optional properties:
+- clock-output-names : from common clock binding; allows overwrite default clock
+	output names ("tclk", "cpuclk", "l2clk", "ddrclk")
+
+Example:
+
+core_clk: core-clocks@d0214 {
+	compatible = "marvell,dove-core-clock";
+	reg = <0xd0214 0x4>;
+	#clock-cells = <1>;
+};
+
+spi0: spi@10600 {
+	compatible = "marvell,orion-spi";
+	/* ... */
+	/* get tclk from core clock provider */
+	clocks = <&core_clk 0>;
+};

Documentation/devicetree/bindings/clock/mvebu-cpu-clock.txt

+Device Tree Clock bindings for cpu clock of Marvell EBU platforms
+
+Required properties:
+- compatible : shall be one of the following:
+	"marvell,armada-xp-cpu-clock" - cpu clocks for Armada XP
+- reg : Address and length of the clock complex register set
+- #clock-cells : should be set to 1.
+- clocks : shall be the input parent clock phandle for the clock.
+
+cpuclk: clock-complex@d0018700 {
+	#clock-cells = <1>;
+	compatible = "marvell,armada-xp-cpu-clock";
+	reg = <0xd0018700 0xA0>;
+	clocks = <&coreclk 1>;
+}
+
+cpu@0 {
+	compatible = "marvell,sheeva-v7";
+	reg = <0>;
+	clocks = <&cpuclk 0>;
+};

Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt

+* Gated Clock bindings for Marvell Orion SoCs
+
+Marvell Dove and Kirkwood allow some peripheral clocks to be gated to save
+some power. The clock consumer should specify the desired clock by having
+the clock ID in its "clocks" phandle cell. The clock ID is directly mapped to
+the corresponding clock gating control bit in HW to ease manual clock lookup
+in datasheet.
+
+The following is a list of provided IDs for Armada 370:
+ID	Clock	Peripheral
+-----------------------------------
+0	Audio	AC97 Cntrl
+1	pex0_en	PCIe 0 Clock out
+2	pex1_en	PCIe 1 Clock out
+3	ge1	Gigabit Ethernet 1
+4	ge0	Gigabit Ethernet 0
+5	pex0	PCIe Cntrl 0
+9	pex1	PCIe Cntrl 1
+15	sata0	SATA Host 0
+17	sdio	SDHCI Host
+25	tdm	Time Division Mplx
+28	ddr	DDR Cntrl
+30	sata1	SATA Host 0
+
+The following is a list of provided IDs for Armada XP:
+ID	Clock	Peripheral
+-----------------------------------
+0	audio	Audio Cntrl
+1	ge3	Gigabit Ethernet 3
+2	ge2	Gigabit Ethernet 2
+3	ge1	Gigabit Ethernet 1
+4	ge0	Gigabit Ethernet 0
+5	pex0	PCIe Cntrl 0
+6	pex1	PCIe Cntrl 1
+7	pex2	PCIe Cntrl 2
+8	pex3	PCIe Cntrl 3
+13	bp
+14	sata0lnk
+15	sata0	SATA Host 0
+16	lcd	LCD Cntrl
+17	sdio	SDHCI Host
+18	usb0	USB Host 0
+19	usb1	USB Host 1
+20	usb2	USB Host 2
+22	xor0	XOR DMA 0
+23	crypto	CESA engine
+25	tdm	Time Division Mplx
+28	xor1	XOR DMA 1
+29	sata1lnk
+30	sata1	SATA Host 0
+
+The following is a list of provided IDs for Dove:
+ID	Clock	Peripheral
+-----------------------------------
+0	usb0	USB Host 0
+1	usb1	USB Host 1
+2	ge	Gigabit Ethernet
+3	sata	SATA Host
+4	pex0	PCIe Cntrl 0
+5	pex1	PCIe Cntrl 1
+8	sdio0	SDHCI Host 0
+9	sdio1	SDHCI Host 1
+10	nand	NAND Cntrl
+11	camera	Camera Cntrl
+12	i2s0	I2S Cntrl 0
+13	i2s1	I2S Cntrl 1
+15	crypto	CESA engine
+21	ac97	AC97 Cntrl
+22	pdma	Peripheral DMA
+23	xor0	XOR DMA 0
+24	xor1	XOR DMA 1
+30	gephy	Gigabit Ethernel PHY
+Note: gephy(30) is implemented as a parent clock of ge(2)
+
+The following is a list of provided IDs for Kirkwood:
+ID	Clock	Peripheral
+-----------------------------------
+0	ge0	Gigabit Ethernet 0
+2	pex0	PCIe Cntrl 0
+3	usb0	USB Host 0
+4	sdio	SDIO Cntrl
+5	tsu	Transp. Stream Unit
+6	dunit	SDRAM Cntrl
+7	runit	Runit
+8	xor0	XOR DMA 0
+9	audio	I2S Cntrl 0
+14	sata0	SATA Host 0
+15	sata1	SATA Host 1
+16	xor1	XOR DMA 1
+17	crypto	CESA engine
+18	pex1	PCIe Cntrl 1
+19	ge1	Gigabit Ethernet 0
+20	tdm	Time Division Mplx
+
+Required properties:
+- compatible : shall be one of the following:
+	"marvell,dove-gating-clock" - for Dove SoC clock gating
+	"marvell,kirkwood-gating-clock" - for Kirkwood SoC clock gating
+- reg : shall be the register address of the Clock Gating Control register
+- #clock-cells : from common clock binding; shall be set to 1
+
+Optional properties:
+- clocks : default parent clock phandle (e.g. tclk)
+
+Example:
+
+gate_clk: clock-gating-control@d0038 {
+	compatible = "marvell,dove-gating-clock";
+	reg = <0xd0038 0x4>;
+	/* default parent clock is tclk */
+	clocks = <&core_clk 0>;
+	#clock-cells = <1>;
+};
+
+sdio0: sdio@92000 {
+	compatible = "marvell,dove-sdhci";
+	/* get clk gate bit 8 (sdio0) */
+	clocks = <&gate_clk 8>;
+};

Documentation/devicetree/bindings/dma/mv-xor.txt

+* Marvell XOR engines
+
+Required properties:
+- compatible: Should be "marvell,orion-xor"
+- reg: Should contain registers location and length (two sets)
+    the first set is the low registers, the second set the high
+    registers for the XOR engine.
+- clocks: pointer to the reference clock
+
+The DT node must also contains sub-nodes for each XOR channel that the
+XOR engine has. Those sub-nodes have the following required
+properties:
+- interrupts: interrupt of the XOR channel
+
+And the following optional properties:
+- dmacap,memcpy to indicate that the XOR channel is capable of memcpy operations
+- dmacap,memset to indicate that the XOR channel is capable of memset operations
+- dmacap,xor to indicate that the XOR channel is capable of xor operations
+
+Example:
+
+xor@d0060900 {
+	compatible = "marvell,orion-xor";
+	reg = <0xd0060900 0x100
+	       0xd0060b00 0x100>;
+	clocks = <&coreclk 0>;
+	status = "okay";
+
+	xor00 {
+	      interrupts = <51>;
+	      dmacap,memcpy;
+	      dmacap,xor;
+	};
+	xor01 {
+	      interrupts = <52>;
+	      dmacap,memcpy;
+	      dmacap,xor;
+	      dmacap,memset;
+	};
+};

Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt

+* Marvell Armada 370 / Armada XP Ethernet Controller (NETA)
+
+Required properties:
+- compatible: should be "marvell,armada-370-neta".
+- reg: address and length of the register set for the device.
+- interrupts: interrupt for the device
+- phy: A phandle to a phy node defining the PHY address (as the reg
+  property, a single integer).
+- phy-mode: The interface between the SoC and the PHY (a string that
+  of_get_phy_mode() can understand)
+- clocks: a pointer to the reference clock for this device.
+
+Example:
+
+ethernet@d0070000 {
+	compatible = "marvell,armada-370-neta";
+	reg = <0xd0070000 0x2500>;
+	interrupts = <8>;
+	clocks = <&gate_clk 4>;
+	status = "okay";
+	phy = <&phy0>;
+	phy-mode = "rgmii-id";
+};

Documentation/devicetree/bindings/net/marvell-orion-mdio.txt

+* Marvell MDIO Ethernet Controller interface
+
+The Ethernet controllers of the Marvel Kirkwood, Dove, Orion5x,
+MV78xx0, Armada 370 and Armada XP have an identical unit that provides
+an interface with the MDIO bus. This driver handles this MDIO
+interface.
+
+Required properties:
+- compatible: "marvell,orion-mdio"
+- reg: address and length of the SMI register
+
+The child nodes of the MDIO driver are the individual PHY devices
+connected to this MDIO bus. They must have a "reg" property given the
+PHY address on the MDIO bus.
+
+Example at the SoC level:
+
+mdio {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "marvell,orion-mdio";
+	reg = <0xd0072004 0x4>;
+};
+
+And at the board level:
+
+mdio {
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+}

MAINTAINERS

@@ -4871,6 +4871,12 @@ S:	Maintained
 F:	drivers/net/ethernet/marvell/mv643xx_eth.*
 F:	include/linux/mv643xx.h
 
+MARVELL MVNETA ETHERNET DRIVER
+M:	Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	drivers/net/ethernet/marvell/mvneta.*
+
 MARVELL MWIFIEX WIRELESS DRIVER
 M:	Bing Zhao <bzhao@marvell.com>
 L:	linux-wireless@vger.kernel.org

arch/arm/Kconfig

@@ -533,6 +533,7 @@ config ARCH_IXP4XX
 config ARCH_DOVE
 	bool "Marvell Dove"
 	select ARCH_REQUIRE_GPIOLIB
+	select COMMON_CLK_DOVE
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select MIGHT_HAVE_PCI

arch/arm/boot/dts/Makefile

@@ -77,7 +77,9 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \
 dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \
 	msm8960-cdp.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
-	armada-xp-db.dtb
+	armada-370-mirabox.dtb \
+	armada-xp-db.dtb \
+	armada-xp-openblocks-ax3-4.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx51-babbage.dtb \
 	imx53-ard.dtb \
 	imx53-evk.dtb \

arch/arm/boot/dts/armada-370-db.dts

@@ -34,9 +34,30 @@ serial@d0012000 {
 			clock-frequency = <200000000>;
 			status = "okay";
 		};
-		timer@d0020300 {
-			clock-frequency = <600000000>;
+		sata@d00a0000 {
+			nr-ports = <2>;
 			status = "okay";
 		};
+
+		mdio {
+			phy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
+
+		ethernet@d0070000 {
+			status = "okay";
+			phy = <&phy0>;
+			phy-mode = "rgmii-id";
+		};
+		ethernet@d0074000 {
+			status = "okay";
+			phy = <&phy1>;
+			phy-mode = "rgmii-id";
+		};
 	};
 };

arch/arm/boot/dts/armada-370-mirabox.dts

+/*
+ * Device Tree file for Globalscale Mirabox
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+/include/ "armada-370.dtsi"
+
+/ {
+	model = "Globalscale Mirabox";
+	compatible = "globalscale,mirabox", "marvell,armada370", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	soc {
+		serial@d0012000 {
+			clock-frequency = <200000000>;
+			status = "okay";
+		};
+		timer@d0020300 {
+			clock-frequency = <600000000>;
+			status = "okay";
+		};
+		mdio {
+			phy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
+		ethernet@d0070000 {
+			status = "okay";
+			phy = <&phy0>;
+			phy-mode = "rgmii-id";
+		};
+		ethernet@d0074000 {
+			status = "okay";
+			phy = <&phy1>;
+			phy-mode = "rgmii-id";
+		};
+	};
+};

arch/arm/boot/dts/armada-370-xp.dtsi

@@ -20,7 +20,7 @@
 
 / {
 	model = "Marvell Armada 370 and XP SoC";
-	compatible = "marvell,armada_370_xp";
+	compatible = "marvell,armada-370-xp";
 
 	cpus {
 		cpu@0 {
@@ -36,6 +36,12 @@ mpic: interrupt-controller@d0020000 {
 	      interrupt-controller;
 	};
 
+	coherency-fabric@d0020200 {
+		compatible = "marvell,coherency-fabric";
+		reg = <0xd0020200 0xb0>,
+		      <0xd0021810 0x1c>;
+	};
+
 	soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -62,12 +68,67 @@ timer@d0020300 {
 			       compatible = "marvell,armada-370-xp-timer";
 			       reg = <0xd0020300 0x30>;
 			       interrupts = <37>, <38>, <39>, <40>;
+			       clocks = <&coreclk 2>;
 		};
 
 		addr-decoding@d0020000 {
 			compatible = "marvell,armada-addr-decoding-controller";
 			reg = <0xd0020000 0x258>;
 		};
+
+		sata@d00a0000 {
+			compatible = "marvell,orion-sata";
+			reg = <0xd00a0000 0x2400>;
+			interrupts = <55>;
+			clocks = <&gateclk 15>, <&gateclk 30>;
+			clock-names = "0", "1";
+			status = "disabled";
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "marvell,orion-mdio";
+			reg = <0xd0072004 0x4>;
+		};
+
+		ethernet@d0070000 {
+				compatible = "marvell,armada-370-neta";
+				reg = <0xd0070000 0x2500>;
+				interrupts = <8>;
+				clocks = <&gateclk 4>;
+				status = "disabled";
+		};
+
+		ethernet@d0074000 {
+				compatible = "marvell,armada-370-neta";
+				reg = <0xd0074000 0x2500>;
+				interrupts = <10>;
+				clocks = <&gateclk 3>;
+				status = "disabled";
+		};
+
+		i2c0: i2c@d0011000 {
+			compatible = "marvell,mv64xxx-i2c";
+			reg = <0xd0011000 0x20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <31>;
+			timeout-ms = <1000>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@d0011100 {
+			compatible = "marvell,mv64xxx-i2c";
+			reg = <0xd0011100 0x20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <32>;
+			timeout-ms = <1000>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
 	};
 };
 

arch/arm/boot/dts/armada-370.dtsi

@@ -20,6 +20,12 @@
 / {
 	model = "Marvell Armada 370 family SoC";
 	compatible = "marvell,armada370", "marvell,armada-370-xp";
+	L2: l2-cache {
+		compatible = "marvell,aurora-outer-cache";
+		reg = <0xd0008000 0x1000>;
+		cache-id-part = <0x100>;
+		wt-override;
+	};
 
 	aliases {
 		gpio0 = &gpio0;
@@ -75,5 +81,56 @@ gpio2: gpio@d0018180 {
 			#interrupts-cells = <2>;
 			interrupts = <91>;
 		};
+
+		coreclk: mvebu-sar@d0018230 {
+			compatible = "marvell,armada-370-core-clock";
+			reg = <0xd0018230 0x08>;
+			#clock-cells = <1>;
+		};
+
+		gateclk: clock-gating-control@d0018220 {
+			compatible = "marvell,armada-370-gating-clock";
+			reg = <0xd0018220 0x4>;
+			clocks = <&coreclk 0>;
+			#clock-cells = <1>;
+		};
+
+		xor@d0060800 {
+			compatible = "marvell,orion-xor";
+			reg = <0xd0060800 0x100
+			       0xd0060A00 0x100>;
+			status = "okay";
+
+			xor00 {
+				interrupts = <51>;
+				dmacap,memcpy;
+				dmacap,xor;
+			};
+			xor01 {
+				interrupts = <52>;
+				dmacap,memcpy;
+				dmacap,xor;
+				dmacap,memset;
+			};
+		};
+
+		xor@d0060900 {
+			compatible = "marvell,orion-xor";
+			reg = <0xd0060900 0x100
+			       0xd0060b00 0x100>;
+			status = "okay";
+
+			xor10 {
+				interrupts = <94>;
+				dmacap,memcpy;
+				dmacap,xor;
+			};
+			xor11 {
+				interrupts = <95>;
+				dmacap,memcpy;
+				dmacap,xor;
+				dmacap,memset;
+			};
+		};
 	};
 };

arch/arm/boot/dts/armada-xp-db.dts

@@ -46,5 +46,49 @@ serial@d0012300 {
 			clock-frequency = <250000000>;
 			status = "okay";
 		};
+
+		sata@d00a0000 {
+			nr-ports = <2>;
+			status = "okay";
+		};
+
+		mdio {
+			phy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+
+			phy2: ethernet-phy@2 {
+				reg = <25>;
+			};
+
+			phy3: ethernet-phy@3 {
+				reg = <27>;
+			};
+		};
+
+		ethernet@d0070000 {
+			status = "okay";
+			phy = <&phy0>;
+			phy-mode = "rgmii-id";
+		};
+		ethernet@d0074000 {
+			status = "okay";
+			phy = <&phy1>;
+			phy-mode = "rgmii-id";
+		};
+		ethernet@d0030000 {
+			status = "okay";
+			phy = <&phy2>;
+			phy-mode = "sgmii";
+		};
+		ethernet@d0034000 {
+			status = "okay";
+			phy = <&phy3>;
+			phy-mode = "sgmii";
+		};
 	};
 };

arch/arm/boot/dts/armada-xp-mv78230.dtsi

@@ -24,6 +24,18 @@ aliases {
 		gpio1 = &gpio1;
 	};
 
+	cpus {
+	    #address-cells = <1>;
+	    #size-cells = <0>;
+
+	    cpu@0 {
+		device_type = "cpu";
+		compatible = "marvell,sheeva-v7";
+		reg = <0>;
+		clocks = <&cpuclk 0>;
+	    };
+	}
+
 	soc {
 		pinctrl {
 			compatible = "marvell,mv78230-pinctrl";

arch/arm/boot/dts/armada-xp-mv78260.dtsi

@@ -25,6 +25,25 @@ aliases {
 		gpio2 = &gpio2;
 	};
 
+	cpus {
+	    #address-cells = <1>;
+	    #size-cells = <0>;
+
+	    cpu@0 {
+		device_type = "cpu";
+		compatible = "marvell,sheeva-v7";
+		reg = <0>;
+		clocks = <&cpuclk 0>;
+	    };
+
+	    cpu@1 {
+		device_type = "cpu";
+		compatible = "marvell,sheeva-v7";
+		reg = <1>;
+		clocks = <&cpuclk 1>;
+	    };
+	};
+
 	soc {
 		pinctrl {
 			compatible = "marvell,mv78260-pinctrl";

arch/arm/boot/dts/armada-xp-mv78460.dtsi

@@ -25,6 +25,40 @@ aliases {
 		gpio2 = &gpio2;
 	};
 
+
+	cpus {
+	    #address-cells = <1>;
+	    #size-cells = <0>;
+
+	    cpu@0 {
+		device_type = "cpu";
+		compatible = "marvell,sheeva-v7";
+		reg = <0>;
+		clocks = <&cpuclk 0>;
+	    };
+
+	    cpu@1 {
+		device_type = "cpu";
+		compatible = "marvell,sheeva-v7";
+		reg = <1>;
+		clocks = <&cpuclk 1>;
+	    };
+
+	    cpu@2 {
+		device_type = "cpu";
+		compatible = "marvell,sheeva-v7";
+		reg = <2>;
+		clocks = <&cpuclk 2>;
+	    };
+
+	    cpu@3 {
+		device_type = "cpu";
+		compatible = "marvell,sheeva-v7";
+		reg = <3>;
+		clocks = <&cpuclk 3>;
+	    };
+	};
+
 	soc {
 		pinctrl {
 			compatible = "marvell,mv78460-pinctrl";

arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts

+/*
+ * Device Tree file for OpenBlocks AX3-4 board
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+/include/ "armada-xp-mv78260.dtsi"
+
+/ {
+	model = "PlatHome OpenBlocks AX3-4 board";
+	compatible = "plathome,openblocks-ax3-4", "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0xC0000000>; /* 3 GB */
+	};
+
+	soc {
+		serial@d0012000 {
+			clock-frequency = <250000000>;
+			status = "okay";
+		};
+		serial@d0012100 {
+			clock-frequency = <250000000>;
+			status = "okay";
+		};
+		pinctrl {
+			led_pins: led-pins-0 {
+				marvell,pins = "mpp49", "mpp51", "mpp53";
+				marvell,function = "gpio";
+			};
+		};
+		leds {
+			compatible = "gpio-leds";
+			pinctrl-names = "default";
+			pinctrl-0 = <&led_pins>;
+
+			red_led {
+				label = "red_led";
+				gpios = <&gpio1 17 1>;
+				default-state = "off";
+			};
+
+			yellow_led {
+				label = "yellow_led";
+				gpios = <&gpio1 19 1>;
+				default-state = "off";
+			};
+
+			green_led {
+				label = "green_led";
+				gpios = <&gpio1 21 1>;
+				default-state = "off";
+				linux,default-trigger = "heartbeat";
+			};
+		};
+
+		mdio {
+			phy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+
+			phy2: ethernet-phy@2 {
+				reg = <2>;
+			};
+
+			phy3: ethernet-phy@3 {
+				reg = <3>;
+			};
+		};
+
+		ethernet@d0070000 {
+			status = "okay";
+			phy = <&phy0>;
+			phy-mode = "sgmii";
+		};
+		ethernet@d0074000 {
+			status = "okay";
+			phy = <&phy1>;
+			phy-mode = "sgmii";
+		};
+		ethernet@d0030000 {
+			status = "okay";
+			phy = <&phy2>;
+			phy-mode = "sgmii";
+		};
+		ethernet@d0034000 {
+			status = "okay";
+			phy = <&phy3>;
+			phy-mode = "sgmii";
+		};
+		i2c@d0011000 {
+			status = "okay";
+			clock-frequency = <400000>;
+		};
+		i2c@d0011100 {
+			status = "okay";
+			clock-frequency = <400000>;
+
+			s35390a: s35390a@30 {
+				compatible = "s35390a";
+				reg = <0x30>;
+			};
+		};
+		sata@d00a0000 {
+			nr-ports = <2>;
+			status = "okay";
+		};
+	};
+};

arch/arm/boot/dts/armada-xp.dtsi

@@ -22,9 +22,22 @@ / {
 	model = "Marvell Armada XP family SoC";
 	compatible = "marvell,armadaxp", "marvell,armada-370-xp";
 
+	L2: l2-cache {
+		compatible = "marvell,aurora-system-cache";
+		reg = <0xd0008000 0x1000>;
+		cache-id-part = <0x100>;
+		wt-override;
+	};
+
 	mpic: interrupt-controller@d0020000 {
 	      reg = <0xd0020a00 0x1d0>,
-		    <0xd0021870 0x58>;
+		    <0xd0021070 0x58>;
+	};
+
+	armada-370-xp-pmsu@d0022000 {
+		compatible = "marvell,armada-370-xp-pmsu";
+		reg = <0xd0022100 0x430>,
+		      <0xd0020800 0x20>;
 	};
 
 	soc {
@@ -47,9 +60,85 @@ timer@d0020300 {
 				marvell,timer-25Mhz;
 		};
 
+		coreclk: mvebu-sar@d0018230 {
+			compatible = "marvell,armada-xp-core-clock";
+			reg = <0xd0018230 0x08>;
+			#clock-cells = <1>;
+		};
+
+		cpuclk: clock-complex@d0018700 {
+			#clock-cells = <1>;
+			compatible = "marvell,armada-xp-cpu-clock";
+			reg = <0xd0018700 0xA0>;
+			clocks = <&coreclk 1>;
+		};
+
+		gateclk: clock-gating-control@d0018220 {
+			compatible = "marvell,armada-xp-gating-clock";
+			reg = <0xd0018220 0x4>;
+			clocks = <&coreclk 0>;
+			#clock-cells = <1>;
+		};
+
 		system-controller@d0018200 {
 				compatible = "marvell,armada-370-xp-system-controller";
 				reg = <0xd0018200 0x500>;
 		};
+
+		ethernet@d0030000 {
+				compatible = "marvell,armada-370-neta";
+				reg = <0xd0030000 0x2500>;
+				interrupts = <12>;
+				clocks = <&gateclk 2>;
+				status = "disabled";
+		};
+
+		ethernet@d0034000 {
+				compatible = "marvell,armada-370-neta";
+				reg = <0xd0034000 0x2500>;
+				interrupts = <14>;
+				clocks = <&gateclk 1>;
+				status = "disabled";
+		};
+
+		xor@d0060900 {
+			compatible = "marvell,orion-xor";
+			reg = <0xd0060900 0x100
+			       0xd0060b00 0x100>;
+			clocks = <&gateclk 22>;
+			status = "okay";
+
+			xor10 {
+				interrupts = <51>;
+				dmacap,memcpy;
+				dmacap,xor;
+			};
+			xor11 {
+				interrupts = <52>;
+				dmacap,memcpy;
+				dmacap,xor;
+				dmacap,memset;
+			};
+		};
+
+		xor@d00f0900 {
+			compatible = "marvell,orion-xor";
+			reg = <0xd00F0900 0x100
+			       0xd00F0B00 0x100>;
+			clocks = <&gateclk 28>;
+			status = "okay";
+
+			xor00 {
+				interrupts = <94>;
+				dmacap,memcpy;
+				dmacap,xor;
+			};
+			xor01 {
+				interrupts = <95>;
+				dmacap,memcpy;
+				dmacap,xor;
+				dmacap,memset;
+			};
+		};
 	};
 };

arch/arm/boot/dts/dove.dtsi

@@ -37,6 +37,19 @@ intc: interrupt-controller {
 			reg = <0x20204 0x04>, <0x20214 0x04>;
 		};
 
+		core_clk: core-clocks@d0214 {
+			compatible = "marvell,dove-core-clock";
+			reg = <0xd0214 0x4>;
+			#clock-cells = <1>;
+		};
+
+		gate_clk: clock-gating-control@d0038 {
+			compatible = "marvell,dove-gating-clock";
+			reg = <0xd0038 0x4>;
+			clocks = <&core_clk 0>;
+			#clock-cells = <1>;
+		};
+
 		uart0: serial@12000 {
 			compatible = "ns16550a";
 			reg = <0x12000 0x100>;
@@ -113,6 +126,7 @@ spi0: spi@10600 {
 			cell-index = <0>;
 			interrupts = <6>;
 			reg = <0x10600 0x28>;
+			clocks = <&core_clk 0>;
 			status = "disabled";
 		};
 
@@ -123,6 +137,7 @@ spi1: spi@14600 {
 			cell-index = <1>;
 			interrupts = <5>;
 			reg = <0x14600 0x28>;
+			clocks = <&core_clk 0>;
 			status = "disabled";
 		};
 
@@ -134,6 +149,7 @@ i2c0: i2c@11000 {
 			interrupts = <11>;
 			clock-frequency = <400000>;
 			timeout-ms = <1000>;
+			clocks = <&core_clk 0>;
 			status = "disabled";
 		};
 
@@ -141,6 +157,7 @@ sdio0: sdio@92000 {
 			compatible = "marvell,dove-sdhci";
 			reg = <0x92000 0x100>;
 			interrupts = <35>, <37>;
+			clocks = <&gate_clk 8>;
 			status = "disabled";
 		};
 
@@ -148,6 +165,7 @@ sdio1: sdio@90000 {
 			compatible = "marvell,dove-sdhci";
 			reg = <0x90000 0x100>;
 			interrupts = <36>, <38>;
+			clocks = <&gate_clk 9>;
 			status = "disabled";
 		};
 
@@ -155,6 +173,7 @@ sata0: sata@a0000 {
 			compatible = "marvell,orion-sata";
 			reg = <0xa0000 0x2400>;
 			interrupts = <62>;
+			clocks = <&gate_clk 3>;
 			nr-ports = <1>;
 			status = "disabled";
 		};
@@ -165,7 +184,50 @@ crypto: crypto@30000 {
 			      <0xc8000000 0x800>;
 			reg-names = "regs", "sram";
 			interrupts = <31>;
+			clocks = <&gate_clk 15>;
+			status = "okay";
+		};
+
+		xor0: dma-engine@60800 {
+			compatible = "marvell,orion-xor";
+			reg = <0x60800 0x100
+			       0x60a00 0x100>;
+			clocks = <&gate_clk 23>;
 			status = "okay";
+
+			channel0 {
+				interrupts = <39>;
+				dmacap,memcpy;
+				dmacap,xor;
+			};
+
+			channel1 {
+				interrupts = <40>;
+				dmacap,memset;
+				dmacap,memcpy;
+				dmacap,xor;
+			};
+		};
+
+		xor1: dma-engine@60900 {
+			compatible = "marvell,orion-xor";
+			reg = <0x60900 0x100
+			       0x60b00 0x100>;
+			clocks = <&gate_clk 24>;
+			status = "okay";
+
+			channel0 {
+				interrupts = <42>;
+				dmacap,memcpy;
+				dmacap,xor;
+			};
+
+			channel1 {
+				interrupts = <43>;
+				dmacap,memset;
+				dmacap,memcpy;
+				dmacap,xor;
+			};
 		};
 	};
 };

arch/arm/boot/dts/kirkwood.dtsi

@@ -23,6 +23,12 @@ ocp@f1000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 
+		core_clk: core-clocks@10030 {
+			compatible = "marvell,kirkwood-core-clock";
+			reg = <0x10030 0x4>;
+	        	#clock-cells = <1>;
+		};
+
 		gpio0: gpio@10100 {
 			compatible = "marvell,orion-gpio";
 			#gpio-cells = <2>;
@@ -48,6 +54,7 @@ serial@12000 {
 			reg = <0x12000 0x100>;
 			reg-shift = <2>;
 			interrupts = <33>;
+			clocks = <&gate_clk 7>;
 			/* set clock-frequency in board dts */
 			status = "disabled";
 		};
@@ -57,6 +64,7 @@ serial@12100 {
 			reg = <0x12100 0x100>;
 			reg-shift = <2>;
 			interrupts = <34>;
+			clocks = <&gate_clk 7>;
 			/* set clock-frequency in board dts */
 			status = "disabled";
 		};
@@ -74,13 +82,62 @@ spi@10600 {
 			cell-index = <0>;
 			interrupts = <23>;
 			reg = <0x10600 0x28>;
+			clocks = <&gate_clk 7>;
 			status = "disabled";
 		};
 
+		gate_clk: clock-gating-control@2011c {
+			compatible = "marvell,kirkwood-gating-clock";
+			reg = <0x2011c 0x4>;
+			clocks = <&core_clk 0>;
+			#clock-cells = <1>;
+		};
+
 		wdt@20300 {
 			compatible = "marvell,orion-wdt";
 			reg = <0x20300 0x28>;
+			clocks = <&gate_clk 7>;
+			status = "okay";
+		};
+
+		xor@60800 {
+			compatible = "marvell,orion-xor";
+			reg = <0x60800 0x100
+			       0x60A00 0x100>;
+			status = "okay";
+			clocks = <&gate_clk 8>;
+
+			xor00 {
+			      interrupts = <5>;
+			      dmacap,memcpy;
+			      dmacap,xor;
+			};
+			xor01 {
+			      interrupts = <6>;
+			      dmacap,memcpy;
+			      dmacap,xor;
+			      dmacap,memset;
+			};
+		};
+
+		xor@60900 {
+			compatible = "marvell,orion-xor";
+			reg = <0x60900 0x100
+			       0xd0B00 0x100>;
 			status = "okay";
+			clocks = <&gate_clk 16>;
+
+			xor00 {
+			      interrupts = <7>;
+			      dmacap,memcpy;
+			      dmacap,xor;
+			};
+			xor01 {
+			      interrupts = <8>;
+			      dmacap,memcpy;
+			      dmacap,xor;
+			      dmacap,memset;
+			};
 		};
 
 		ehci@50000 {
@@ -94,6 +151,8 @@ sata@80000 {
 			compatible = "marvell,orion-sata";
 			reg = <0x80000 0x5000>;
 			interrupts = <21>;
+			clocks = <&gate_clk 14>, <&gate_clk 15>;
+			clock-names = "0", "1";
 			status = "disabled";
 		};
 
@@ -107,6 +166,7 @@ nand@3000000 {
 			reg = <0x3000000 0x400>;
 			chip-delay = <25>;
 			/* set partition map and/or chip-delay in board dts */
+			clocks = <&gate_clk 7>;
 			status = "disabled";
 		};
 
@@ -117,6 +177,7 @@ i2c@11000 {
 			#size-cells = <0>;
 			interrupts = <29>;
 			clock-frequency = <100000>;
+			clocks = <&gate_clk 7>;
 			status = "disabled";
 		};
 
@@ -126,6 +187,7 @@ crypto@30000 {
 			      <0xf5000000 0x800>;
 			reg-names = "regs", "sram";
 			interrupts = <22>;
+			clocks = <&gate_clk 17>;
 			status = "okay";
 		};
 	};

arch/arm/configs/multi_v7_defconfig

@@ -17,8 +17,10 @@ CONFIG_ARM_APPENDED_DTB=y
 CONFIG_VFP=y
 CONFIG_NEON=y
 CONFIG_NET=y
+CONFIG_BLK_DEV_SD=y
 CONFIG_ATA=y
 CONFIG_SATA_HIGHBANK=y
+CONFIG_SATA_MV=y
 CONFIG_NETDEVICES=y
 CONFIG_NET_CALXEDA_XGMAC=y
 CONFIG_SMSC911X=y

arch/arm/configs/mvebu_defconfig

@@ -12,6 +12,9 @@ CONFIG_ARCH_MVEBU=y
 CONFIG_MACH_ARMADA_370=y
 CONFIG_MACH_ARMADA_XP=y
 # CONFIG_CACHE_L2X0 is not set
+# CONFIG_SWP_EMULATE is not set
+CONFIG_SMP=y
+# CONFIG_LOCAL_TIMERS is not set
 CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
 # CONFIG_COMPACTION is not set
@@ -19,13 +22,27 @@ CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_VFP=y
+CONFIG_NET=y
+CONFIG_INET=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_SATA_MV=y
+CONFIG_NETDEVICES=y
+CONFIG_MVNETA=y
+CONFIG_MARVELL_PHY=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_I2C=y
+CONFIG_I2C_MV64XXX=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_USB_SUPPORT is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_S35390A=y
+CONFIG_DMADEVICES=y
+CONFIG_MV_XOR=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y

arch/arm/include/asm/dma-mapping.h

@@ -111,6 +111,8 @@ static inline void dma_free_noncoherent(struct device *dev, size_t size,
 
 extern int dma_supported(struct device *dev, u64 mask);
 
+extern int arm_dma_set_mask(struct device *dev, u64 dma_mask);
+
 /**
  * arm_dma_alloc - allocate consistent memory for DMA
  * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices

arch/arm/mach-dove/Kconfig

@@ -17,6 +17,8 @@ config MACH_CM_A510
 
 config MACH_DOVE_DT
 	bool "Marvell Dove Flattened Device Tree"
+	select MVEBU_CLK_CORE
+	select MVEBU_CLK_GATING
 	select USE_OF
 	help
 	  Say 'Y' here if you want your kernel to support the

arch/arm/mach-dove/common.c

@@ -14,6 +14,7 @@
 #include <linux/platform_device.h>
 #include <linux/pci.h>
 #include <linux/clk-provider.h>
+#include <linux/clk/mvebu.h>
 #include <linux/ata_platform.h>
 #include <linux/gpio.h>
 #include <linux/of.h>
@@ -32,6 +33,7 @@
 #include <linux/irq.h>
 #include <plat/time.h>
 #include <linux/platform_data/usb-ehci-orion.h>
+#include <linux/platform_data/dma-mv_xor.h>
 #include <plat/irq.h>
 #include <plat/common.h>
 #include <plat/addr-map.h>
@@ -123,8 +125,8 @@ static void __init dove_clk_init(void)
 	orion_clkdev_add(NULL, "mv_crypto", crypto);
 	orion_clkdev_add(NULL, "dove-ac97", ac97);
 	orion_clkdev_add(NULL, "dove-pdma", pdma);
-	orion_clkdev_add(NULL, "mv_xor_shared.0", xor0);
-	orion_clkdev_add(NULL, "mv_xor_shared.1", xor1);
+	orion_clkdev_add(NULL, MV_XOR_NAME ".0", xor0);
+	orion_clkdev_add(NULL, MV_XOR_NAME ".1", xor1);
 }
 
 /*****************************************************************************
@@ -376,19 +378,44 @@ void dove_restart(char mode, const char *cmd)
 
 #if defined(CONFIG_MACH_DOVE_DT)
 /*
- * Auxdata required until real OF clock provider
+ * There are still devices that doesn't even know about DT,
+ * get clock gates here and add a clock lookup.
  */
-struct of_dev_auxdata dove_auxdata_lookup[] __initdata = {
-	OF_DEV_AUXDATA("marvell,orion-spi", 0xf1010600, "orion_spi.0", NULL),
-	OF_DEV_AUXDATA("marvell,orion-spi", 0xf1014600, "orion_spi.1", NULL),
-	OF_DEV_AUXDATA("marvell,orion-wdt", 0xf1020300, "orion_wdt", NULL),
-	OF_DEV_AUXDATA("marvell,mv64xxx-i2c", 0xf1011000, "mv64xxx_i2c.0",
-		       NULL),
-	OF_DEV_AUXDATA("marvell,orion-sata", 0xf10a0000, "sata_mv.0", NULL),
-	OF_DEV_AUXDATA("marvell,dove-sdhci", 0xf1092000, "sdhci-dove.0", NULL),
-	OF_DEV_AUXDATA("marvell,dove-sdhci", 0xf1090000, "sdhci-dove.1", NULL),
-	{},
-};
+static void __init dove_legacy_clk_init(void)
+{
+	struct device_node *np = of_find_compatible_node(NULL, NULL,
+					 "marvell,dove-gating-clock");
+	struct of_phandle_args clkspec;
+
+	clkspec.np = np;
+	clkspec.args_count = 1;
+
+	clkspec.args[0] = CLOCK_GATING_BIT_USB0;
+	orion_clkdev_add(NULL, "orion-ehci.0",
+			 of_clk_get_from_provider(&clkspec));
+
+	clkspec.args[0] = CLOCK_GATING_BIT_USB1;
+	orion_clkdev_add(NULL, "orion-ehci.1",
+			 of_clk_get_from_provider(&clkspec));
+
+	clkspec.args[0] = CLOCK_GATING_BIT_GBE;
+	orion_clkdev_add(NULL, "mv643xx_eth_port.0",
+			 of_clk_get_from_provider(&clkspec));
+
+	clkspec.args[0] = CLOCK_GATING_BIT_PCIE0;
+	orion_clkdev_add("0", "pcie",
+			 of_clk_get_from_provider(&clkspec));
+
+	clkspec.args[0] = CLOCK_GATING_BIT_PCIE1;
+	orion_clkdev_add("1", "pcie",
+			 of_clk_get_from_provider(&clkspec));
+}
+
+static void __init dove_of_clk_init(void)
+{
+	mvebu_clocks_init();
+	dove_legacy_clk_init();
+}
 
 static struct mv643xx_eth_platform_data dove_dt_ge00_data = {
 	.phy_addr = MV643XX_ETH_PHY_ADDR_DEFAULT,
@@ -405,20 +432,17 @@ static void __init dove_dt_init(void)
 	dove_setup_cpu_mbus();
 
 	/* Setup root of clk tree */
-	dove_clk_init();
+	dove_of_clk_init();
 
 	/* Internal devices not ported to DT yet */
 	dove_rtc_init();
-	dove_xor0_init();
-	dove_xor1_init();
 
 	dove_ge00_init(&dove_dt_ge00_data);
 	dove_ehci0_init();
 	dove_ehci1_init();
 	dove_pcie_init(1, 1);
 
-	of_platform_populate(NULL, of_default_bus_match_table,
-			     dove_auxdata_lookup, NULL);
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
 static const char * const dove_dt_board_compat[] = {

arch/arm/mach-kirkwood/Kconfig

@@ -51,6 +51,8 @@ config ARCH_KIRKWOOD_DT
 	select POWER_RESET_GPIO
 	select REGULATOR
 	select REGULATOR_FIXED_VOLTAGE
+	select MVEBU_CLK_CORE
+	select MVEBU_CLK_GATING
 	select USE_OF
 	help
 	  Say 'Y' here if you want your kernel to support the

arch/arm/mach-kirkwood/board-dt.c

@@ -14,11 +14,15 @@
 #include <linux/init.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
+#include <linux/clk-provider.h>
+#include <linux/clk/mvebu.h>
 #include <linux/kexec.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <mach/bridge-regs.h>
+#include <linux/platform_data/usb-ehci-orion.h>
 #include <plat/irq.h>
+#include <plat/common.h>
 #include "common.h"
 
 static struct of_device_id kirkwood_dt_match_table[] __initdata = {
@@ -26,18 +30,50 @@ static struct of_device_id kirkwood_dt_match_table[] __initdata = {
 	{ }
 };
 
-static struct of_dev_auxdata kirkwood_auxdata_lookup[] __initdata = {
-	OF_DEV_AUXDATA("marvell,orion-spi", 0xf1010600, "orion_spi.0", NULL),
-	OF_DEV_AUXDATA("marvell,mv64xxx-i2c", 0xf1011000, "mv64xxx_i2c.0",
-		       NULL),
-	OF_DEV_AUXDATA("marvell,mv64xxx-i2c", 0xf1011100, "mv64xxx_i2c.1",
-		       NULL),
-	OF_DEV_AUXDATA("marvell,orion-wdt", 0xf1020300, "orion_wdt", NULL),
-	OF_DEV_AUXDATA("marvell,orion-sata", 0xf1080000, "sata_mv.0", NULL),
-	OF_DEV_AUXDATA("marvell,orion-nand", 0xf4000000, "orion_nand", NULL),
-	OF_DEV_AUXDATA("marvell,orion-crypto", 0xf1030000, "mv_crypto", NULL),
-	{},
-};
+/*
+ * There are still devices that doesn't know about DT yet.  Get clock
+ * gates here and add a clock lookup alias, so that old platform
+ * devices still work.
+*/
+
+static void __init kirkwood_legacy_clk_init(void)
+{
+
+	struct device_node *np = of_find_compatible_node(
+		NULL, NULL, "marvell,kirkwood-gating-clock");
+
+	struct of_phandle_args clkspec;
+
+	clkspec.np = np;
+	clkspec.args_count = 1;
+
+	clkspec.args[0] = CGC_BIT_GE0;
+	orion_clkdev_add(NULL, "mv643xx_eth_port.0",
+			 of_clk_get_from_provider(&clkspec));
+
+	clkspec.args[0] = CGC_BIT_PEX0;
+	orion_clkdev_add("0", "pcie",
+			 of_clk_get_from_provider(&clkspec));
+
+	clkspec.args[0] = CGC_BIT_USB0;
+	orion_clkdev_add(NULL, "orion-ehci.0",
+			 of_clk_get_from_provider(&clkspec));
+
+	clkspec.args[0] = CGC_BIT_PEX1;
+	orion_clkdev_add("1", "pcie",
+			 of_clk_get_from_provider(&clkspec));
+
+	clkspec.args[0] = CGC_BIT_GE1;
+	orion_clkdev_add(NULL, "mv643xx_eth_port.1",
+			 of_clk_get_from_provider(&clkspec));
+
+}
+
+static void __init kirkwood_of_clk_init(void)
+{
+	mvebu_clocks_init();
+	kirkwood_legacy_clk_init();
+}
 
 static void __init kirkwood_dt_init(void)
 {
@@ -56,11 +92,7 @@ static void __init kirkwood_dt_init(void)
 	kirkwood_l2_init();
 
 	/* Setup root of clk tree */
-	kirkwood_clk_init();
-
-	/* internal devices that every board has */
-	kirkwood_xor0_init();
-	kirkwood_xor1_init();
+	kirkwood_of_clk_init();
 
 #ifdef CONFIG_KEXEC
 	kexec_reinit = kirkwood_enable_pcie;
@@ -115,8 +147,7 @@ static void __init kirkwood_dt_init(void)
 	if (of_machine_is_compatible("zyxel,nsa310"))
 		nsa310_init();
 
-	of_platform_populate(NULL, kirkwood_dt_match_table,
-			     kirkwood_auxdata_lookup, NULL);
+	of_platform_populate(NULL, kirkwood_dt_match_table, NULL, NULL);
 }
 
 static const char * const kirkwood_dt_board_compat[] = {

arch/arm/mach-kirkwood/common.c

@@ -260,8 +260,8 @@ void __init kirkwood_clk_init(void)
 	orion_clkdev_add(NULL, "orion_nand", runit);
 	orion_clkdev_add(NULL, "mvsdio", sdio);
 	orion_clkdev_add(NULL, "mv_crypto", crypto);
-	orion_clkdev_add(NULL, MV_XOR_SHARED_NAME ".0", xor0);
-	orion_clkdev_add(NULL, MV_XOR_SHARED_NAME ".1", xor1);
+	orion_clkdev_add(NULL, MV_XOR_NAME ".0", xor0);
+	orion_clkdev_add(NULL, MV_XOR_NAME ".1", xor1);
 	orion_clkdev_add("0", "pcie", pex0);
 	orion_clkdev_add("1", "pcie", pex1);
 	orion_clkdev_add(NULL, "kirkwood-i2s", audio);

arch/arm/mach-mvebu/Kconfig

@@ -9,6 +9,10 @@ config ARCH_MVEBU
 	select PINCTRL
 	select PLAT_ORION
 	select SPARSE_IRQ
+	select CLKDEV_LOOKUP
+	select MVEBU_CLK_CORE
+	select MVEBU_CLK_CPU
+	select MVEBU_CLK_GATING
 
 if ARCH_MVEBU
 
@@ -17,7 +21,9 @@ menu "Marvell SOC with device tree"
 config MACH_ARMADA_370_XP
 	bool
 	select ARMADA_370_XP_TIMER
-	select CPU_V7
+	select HAVE_SMP
+	select CACHE_L2X0
+	select CPU_PJ4B
 
 config MACH_ARMADA_370
 	bool "Marvell Armada 370 boards"

arch/arm/mach-mvebu/Makefile

@@ -2,4 +2,6 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
 	-I$(srctree)/arch/arm/plat-orion/include
 
 obj-y += system-controller.o
-obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o irq-armada-370-xp.o addr-map.o
+obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o irq-armada-370-xp.o addr-map.o coherency.o coherency_ll.o pmsu.o
+obj-$(CONFIG_SMP)                += platsmp.o headsmp.o
+obj-$(CONFIG_HOTPLUG_CPU)        += hotplug.o

arch/arm/mach-mvebu/addr-map.c

@@ -78,7 +78,7 @@ armada_cfg_base(const struct orion_addr_map_cfg *cfg, int win)
 	if (win < 8)
 		offset = (win << 4);
 	else
-		offset = ARMADA_WINDOW_8_PLUS_OFFSET + (win << 3);
+		offset = ARMADA_WINDOW_8_PLUS_OFFSET + ((win - 8) << 3);
 
 	return cfg->bridge_virt_base + offset;
 }
@@ -108,6 +108,9 @@ static int __init armada_setup_cpu_mbus(void)
 
 	addr_map_cfg.bridge_virt_base = mbus_unit_addr_decoding_base;
 
+	if (of_find_compatible_node(NULL, NULL, "marvell,coherency-fabric"))
+		addr_map_cfg.hw_io_coherency = 1;
+
 	/*
 	 * Disable, clear and configure windows.
 	 */

arch/arm/mach-mvebu/armada-370-xp.c

@@ -17,11 +17,14 @@
 #include <linux/of_platform.h>
 #include <linux/io.h>
 #include <linux/time-armada-370-xp.h>
+#include <linux/clk/mvebu.h>
+#include <linux/dma-mapping.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 #include "armada-370-xp.h"
 #include "common.h"
+#include "coherency.h"
 
 static struct map_desc armada_370_xp_io_desc[] __initdata = {
 	{
@@ -37,27 +40,45 @@ void __init armada_370_xp_map_io(void)
 	iotable_init(armada_370_xp_io_desc, ARRAY_SIZE(armada_370_xp_io_desc));
 }
 
+void __init armada_370_xp_timer_and_clk_init(void)
+{
+	mvebu_clocks_init();
+	armada_370_xp_timer_init();
+}
+
+void __init armada_370_xp_init_early(void)
+{
+	/*
+	 * Some Armada 370/XP devices allocate their coherent buffers
+	 * from atomic context. Increase size of atomic coherent pool
+	 * to make sure such the allocations won't fail.
+	 */
+	init_dma_coherent_pool_size(SZ_1M);
+}
+
 struct sys_timer armada_370_xp_timer = {
-	.init		= armada_370_xp_timer_init,
+	.init		= armada_370_xp_timer_and_clk_init,
 };
 
 static void __init armada_370_xp_dt_init(void)
 {
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+	coherency_init();
 }
 
-static const char * const armada_370_xp_dt_board_dt_compat[] = {
-	"marvell,a370-db",
-	"marvell,axp-db",
+static const char * const armada_370_xp_dt_compat[] = {
+	"marvell,armada-370-xp",
 	NULL,
 };
 
-DT_MACHINE_START(ARMADA_XP_DT, "Marvell Aramada 370/XP (Device Tree)")
+DT_MACHINE_START(ARMADA_XP_DT, "Marvell Armada 370/XP (Device Tree)")
+	.smp		= smp_ops(armada_xp_smp_ops),
 	.init_machine	= armada_370_xp_dt_init,
 	.map_io		= armada_370_xp_map_io,
+	.init_early	= armada_370_xp_init_early,
 	.init_irq	= armada_370_xp_init_irq,
 	.handle_irq     = armada_370_xp_handle_irq,
 	.timer		= &armada_370_xp_timer,
 	.restart	= mvebu_restart,
-	.dt_compat	= armada_370_xp_dt_board_dt_compat,
+	.dt_compat	= armada_370_xp_dt_compat,
 MACHINE_END

arch/arm/mach-mvebu/armada-370-xp.h

@@ -19,4 +19,11 @@
 #define ARMADA_370_XP_REGS_VIRT_BASE	IOMEM(0xfeb00000)
 #define ARMADA_370_XP_REGS_SIZE		SZ_1M
 
+#ifdef CONFIG_SMP
+#include <linux/cpumask.h>
+
+void armada_mpic_send_doorbell(const struct cpumask *mask, unsigned int irq);
+void armada_xp_mpic_smp_cpu_init(void);
+#endif
+
 #endif /* __MACH_ARMADA_370_XP_H */

arch/arm/mach-mvebu/coherency.c

+/*
+ * Coherency fabric (Aurora) support for Armada 370 and XP platforms.
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Yehuda Yitschak <yehuday@marvell.com>
+ * Gregory Clement <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * The Armada 370 and Armada XP SOCs have a coherency fabric which is
+ * responsible for ensuring hardware coherency between all CPUs and between
+ * CPUs and I/O masters. This file initializes the coherency fabric and
+ * supplies basic routines for configuring and controlling hardware coherency
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/of_address.h>
+#include <linux/io.h>
+#include <linux/smp.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <asm/smp_plat.h>
+#include "armada-370-xp.h"
+
+/*
+ * Some functions in this file are called very early during SMP
+ * initialization. At that time the device tree framework is not yet
+ * ready, and it is not possible to get the register address to
+ * ioremap it. That's why the pointer below is given with an initial
+ * value matching its virtual mapping
+ */
+static void __iomem *coherency_base = ARMADA_370_XP_REGS_VIRT_BASE + 0x20200;
+static void __iomem *coherency_cpu_base;
+
+/* Coherency fabric registers */
+#define COHERENCY_FABRIC_CFG_OFFSET		   0x4
+
+#define IO_SYNC_BARRIER_CTL_OFFSET		   0x0
+
+static struct of_device_id of_coherency_table[] = {
+	{.compatible = "marvell,coherency-fabric"},
+	{ /* end of list */ },
+};
+
+#ifdef CONFIG_SMP
+int coherency_get_cpu_count(void)
+{
+	int reg, cnt;
+
+	reg = readl(coherency_base + COHERENCY_FABRIC_CFG_OFFSET);
+	cnt = (reg & 0xF) + 1;
+
+	return cnt;
+}
+#endif
+
+/* Function defined in coherency_ll.S */
+int ll_set_cpu_coherent(void __iomem *base_addr, unsigned int hw_cpu_id);
+
+int set_cpu_coherent(unsigned int hw_cpu_id, int smp_group_id)
+{
+	if (!coherency_base) {
+		pr_warn("Can't make CPU %d cache coherent.\n", hw_cpu_id);
+		pr_warn("Coherency fabric is not initialized\n");
+		return 1;
+	}
+
+	return ll_set_cpu_coherent(coherency_base, hw_cpu_id);
+}
+
+static inline void mvebu_hwcc_sync_io_barrier(void)
+{
+	writel(0x1, coherency_cpu_base + IO_SYNC_BARRIER_CTL_OFFSET);
+	while (readl(coherency_cpu_base + IO_SYNC_BARRIER_CTL_OFFSET) & 0x1);
+}
+
+static dma_addr_t mvebu_hwcc_dma_map_page(struct device *dev, struct page *page,
+				  unsigned long offset, size_t size,
+				  enum dma_data_direction dir,
+				  struct dma_attrs *attrs)
+{
+	if (dir != DMA_TO_DEVICE)
+		mvebu_hwcc_sync_io_barrier();
+	return pfn_to_dma(dev, page_to_pfn(page)) + offset;
+}
+
+
+static void mvebu_hwcc_dma_unmap_page(struct device *dev, dma_addr_t dma_handle,
+			      size_t size, enum dma_data_direction dir,
+			      struct dma_attrs *attrs)
+{
+	if (dir != DMA_TO_DEVICE)
+		mvebu_hwcc_sync_io_barrier();
+}
+
+static void mvebu_hwcc_dma_sync(struct device *dev, dma_addr_t dma_handle,
+			size_t size, enum dma_data_direction dir)
+{
+	if (dir != DMA_TO_DEVICE)
+		mvebu_hwcc_sync_io_barrier();
+}
+
+static struct dma_map_ops mvebu_hwcc_dma_ops = {
+	.alloc			= arm_dma_alloc,
+	.free			= arm_dma_free,
+	.mmap			= arm_dma_mmap,
+	.map_page		= mvebu_hwcc_dma_map_page,
+	.unmap_page		= mvebu_hwcc_dma_unmap_page,
+	.get_sgtable		= arm_dma_get_sgtable,
+	.map_sg			= arm_dma_map_sg,
+	.unmap_sg		= arm_dma_unmap_sg,
+	.sync_single_for_cpu	= mvebu_hwcc_dma_sync,
+	.sync_single_for_device	= mvebu_hwcc_dma_sync,
+	.sync_sg_for_cpu	= arm_dma_sync_sg_for_cpu,
+	.sync_sg_for_device	= arm_dma_sync_sg_for_device,
+	.set_dma_mask		= arm_dma_set_mask,
+};
+
+static int mvebu_hwcc_platform_notifier(struct notifier_block *nb,
+				       unsigned long event, void *__dev)
+{
+	struct device *dev = __dev;
+
+	if (event != BUS_NOTIFY_ADD_DEVICE)
+		return NOTIFY_DONE;
+	set_dma_ops(dev, &mvebu_hwcc_dma_ops);
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block mvebu_hwcc_platform_nb = {
+	.notifier_call = mvebu_hwcc_platform_notifier,
+};
+
+int __init coherency_init(void)
+{
+	struct device_node *np;
+
+	np = of_find_matching_node(NULL, of_coherency_table);
+	if (np) {
+		pr_info("Initializing Coherency fabric\n");
+		coherency_base = of_iomap(np, 0);
+		coherency_cpu_base = of_iomap(np, 1);
+		set_cpu_coherent(cpu_logical_map(smp_processor_id()), 0);
+		bus_register_notifier(&platform_bus_type,
+					&mvebu_hwcc_platform_nb);
+	}
+
+	return 0;
+}

arch/arm/mach-mvebu/coherency.h

+/*
+ * arch/arm/mach-mvebu/include/mach/coherency.h
+ *
+ *
+ * Coherency fabric (Aurora) support for Armada 370 and XP platforms.
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_370_XP_COHERENCY_H
+#define __MACH_370_XP_COHERENCY_H
+
+#ifdef CONFIG_SMP
+int coherency_get_cpu_count(void);
+#endif
+
+int set_cpu_coherent(int cpu_id, int smp_group_id);
+int coherency_init(void);
+
+#endif	/* __MACH_370_XP_COHERENCY_H */

arch/arm/mach-mvebu/coherency_ll.S

+/*
+ * Coherency fabric: low level functions
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * This file implements the assembly function to add a CPU to the
+ * coherency fabric. This function is called by each of the secondary
+ * CPUs during their early boot in an SMP kernel, this why this
+ * function have to callable from assembly. It can also be called by a
+ * primary CPU from C code during its boot.
+ */
+
+#include <linux/linkage.h>
+#define ARMADA_XP_CFB_CTL_REG_OFFSET 0x0
+#define ARMADA_XP_CFB_CFG_REG_OFFSET 0x4
+
+	.text
+/*
+ * r0: Coherency fabric base register address
+ * r1: HW CPU id
+ */
+ENTRY(ll_set_cpu_coherent)
+	/* Create bit by cpu index */
+	mov	r3, #(1 << 24)
+	lsl	r1, r3, r1
+
+	/* Add CPU to SMP group - Atomic */
+	add	r3, r0, #ARMADA_XP_CFB_CTL_REG_OFFSET
+	ldr	r2, [r3]
+	orr	r2, r2, r1
+	str	r2, [r3]
+
+	/* Enable coherency on CPU - Atomic */
+	add	r3, r0, #ARMADA_XP_CFB_CFG_REG_OFFSET
+	ldr	r2, [r3]
+	orr	r2, r2, r1
+	str	r2, [r3]
+
+	dsb
+
+	mov	r0, #0
+	mov	pc, lr
+ENDPROC(ll_set_cpu_coherent)

arch/arm/mach-mvebu/common.h

@@ -20,4 +20,9 @@ void mvebu_restart(char mode, const char *cmd);
 void armada_370_xp_init_irq(void);
 void armada_370_xp_handle_irq(struct pt_regs *regs);
 
+void armada_xp_cpu_die(unsigned int cpu);
+int armada_370_xp_coherency_init(void);
+int armada_370_xp_pmsu_init(void);
+void armada_xp_secondary_startup(void);
+extern struct smp_operations armada_xp_smp_ops;
 #endif

arch/arm/mach-mvebu/headsmp.S

+/*
+ * SMP support: Entry point for secondary CPUs
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Yehuda Yitschak <yehuday@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * This file implements the assembly entry point for secondary CPUs in
+ * an SMP kernel. The only thing we need to do is to add the CPU to
+ * the coherency fabric by writing to 2 registers. Currently the base
+ * register addresses are hard coded due to the early initialisation
+ * problems.
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+/*
+ * At this stage the secondary CPUs don't have acces yet to the MMU, so
+ * we have to provide physical addresses
+ */
+#define ARMADA_XP_CFB_BASE	     0xD0020200
+
+	__CPUINIT
+
+/*
+ * Armada XP specific entry point for secondary CPUs.
+ * We add the CPU to the coherency fabric and then jump to secondary
+ * startup
+ */
+ENTRY(armada_xp_secondary_startup)
+
+	/* Read CPU id */
+	mrc     p15, 0, r1, c0, c0, 5
+	and     r1, r1, #0xF
+
+	/* Add CPU to coherency fabric */
+	ldr     r0, =ARMADA_XP_CFB_BASE
+
+	bl	ll_set_cpu_coherent
+	b	secondary_startup
+
+ENDPROC(armada_xp_secondary_startup)

arch/arm/mach-mvebu/hotplug.c

+/*
+ * Symmetric Multi Processing (SMP) support for Armada XP
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/smp.h>
+#include <asm/proc-fns.h>
+
+/*
+ * platform-specific code to shutdown a CPU
+ *
+ * Called with IRQs disabled
+ */
+void __ref armada_xp_cpu_die(unsigned int cpu)
+{
+	cpu_do_idle();
+
+	/* We should never return from idle */
+	panic("mvebu: cpu %d unexpectedly exit from shutdown\n", cpu);
+}

arch/arm/mach-mvebu/irq-armada-370-xp.c

@@ -24,6 +24,8 @@
 #include <linux/irqdomain.h>
 #include <asm/mach/arch.h>
 #include <asm/exception.h>
+#include <asm/smp_plat.h>
+#include <asm/hardware/cache-l2x0.h>
 
 /* Interrupt Controller Registers Map */
 #define ARMADA_370_XP_INT_SET_MASK_OFFS		(0x48)
@@ -35,6 +37,12 @@
 
 #define ARMADA_370_XP_CPU_INTACK_OFFS		(0x44)
 
+#define ARMADA_370_XP_SW_TRIG_INT_OFFS           (0x4)
+#define ARMADA_370_XP_IN_DRBEL_MSK_OFFS          (0xc)
+#define ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS        (0x8)
+
+#define ACTIVE_DOORBELLS			(8)
+
 static void __iomem *per_cpu_int_base;
 static void __iomem *main_int_base;
 static struct irq_domain *armada_370_xp_mpic_domain;
@@ -51,11 +59,22 @@ static void armada_370_xp_irq_unmask(struct irq_data *d)
 	       per_cpu_int_base + ARMADA_370_XP_INT_CLEAR_MASK_OFFS);
 }
 
+#ifdef CONFIG_SMP
+static int armada_xp_set_affinity(struct irq_data *d,
+				  const struct cpumask *mask_val, bool force)
+{
+	return 0;
+}
+#endif
+
 static struct irq_chip armada_370_xp_irq_chip = {
 	.name		= "armada_370_xp_irq",
 	.irq_mask       = armada_370_xp_irq_mask,
 	.irq_mask_ack   = armada_370_xp_irq_mask,
 	.irq_unmask     = armada_370_xp_irq_unmask,
+#ifdef CONFIG_SMP
+	.irq_set_affinity = armada_xp_set_affinity,
+#endif
 };
 
 static int armada_370_xp_mpic_irq_map(struct irq_domain *h,
@@ -72,6 +91,41 @@ static int armada_370_xp_mpic_irq_map(struct irq_domain *h,
 	return 0;
 }
 
+#ifdef CONFIG_SMP
+void armada_mpic_send_doorbell(const struct cpumask *mask, unsigned int irq)
+{
+	int cpu;
+	unsigned long map = 0;
+
+	/* Convert our logical CPU mask into a physical one. */
+	for_each_cpu(cpu, mask)
+		map |= 1 << cpu_logical_map(cpu);
+
+	/*
+	 * Ensure that stores to Normal memory are visible to the
+	 * other CPUs before issuing the IPI.
+	 */
+	dsb();
+
+	/* submit softirq */
+	writel((map << 8) | irq, main_int_base +
+		ARMADA_370_XP_SW_TRIG_INT_OFFS);
+}
+
+void armada_xp_mpic_smp_cpu_init(void)
+{
+	/* Clear pending IPIs */
+	writel(0, per_cpu_int_base + ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS);
+
+	/* Enable first 8 IPIs */
+	writel((1 << ACTIVE_DOORBELLS) - 1, per_cpu_int_base +
+		ARMADA_370_XP_IN_DRBEL_MSK_OFFS);
+
+	/* Unmask IPI interrupt */
+	writel(0, per_cpu_int_base + ARMADA_370_XP_INT_CLEAR_MASK_OFFS);
+}
+#endif /* CONFIG_SMP */
+
 static struct irq_domain_ops armada_370_xp_mpic_irq_ops = {
 	.map = armada_370_xp_mpic_irq_map,
 	.xlate = irq_domain_xlate_onecell,
@@ -91,13 +145,18 @@ static int __init armada_370_xp_mpic_of_init(struct device_node *node,
 	control = readl(main_int_base + ARMADA_370_XP_INT_CONTROL);
 
 	armada_370_xp_mpic_domain =
-	    irq_domain_add_linear(node, (control >> 2) & 0x3ff,
-				  &armada_370_xp_mpic_irq_ops, NULL);
+		irq_domain_add_linear(node, (control >> 2) & 0x3ff,
+				&armada_370_xp_mpic_irq_ops, NULL);
 
 	if (!armada_370_xp_mpic_domain)
 		panic("Unable to add Armada_370_Xp MPIC irq domain (DT)\n");
 
 	irq_set_default_host(armada_370_xp_mpic_domain);
+
+#ifdef CONFIG_SMP
+	armada_xp_mpic_smp_cpu_init();
+#endif
+
 	return 0;
 }
 
@@ -111,14 +170,36 @@ asmlinkage void __exception_irq_entry armada_370_xp_handle_irq(struct pt_regs
 					ARMADA_370_XP_CPU_INTACK_OFFS);
 		irqnr = irqstat & 0x3FF;
 
-		if (irqnr < 1023) {
-			irqnr =
-			    irq_find_mapping(armada_370_xp_mpic_domain, irqnr);
+		if (irqnr > 1022)
+			break;
+
+		if (irqnr >= 8) {
+			irqnr =	irq_find_mapping(armada_370_xp_mpic_domain,
+					irqnr);
 			handle_IRQ(irqnr, regs);
 			continue;
 		}
+#ifdef CONFIG_SMP
+		/* IPI Handling */
+		if (irqnr == 0) {
+			u32 ipimask, ipinr;
+
+			ipimask = readl_relaxed(per_cpu_int_base +
+						ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS)
+				& 0xFF;
+
+			writel(0x0, per_cpu_int_base +
+				ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS);
+
+			/* Handle all pending doorbells */
+			for (ipinr = 0; ipinr < ACTIVE_DOORBELLS; ipinr++) {
+				if (ipimask & (0x1 << ipinr))
+					handle_IPI(ipinr, regs);
+			}
+			continue;
+		}
+#endif
 
-		break;
 	} while (1);
 }
 
@@ -130,4 +211,7 @@ static const struct of_device_id mpic_of_match[] __initconst = {
 void __init armada_370_xp_init_irq(void)
 {
 	of_irq_init(mpic_of_match);
+#ifdef CONFIG_CACHE_L2X0
+	l2x0_of_init(0, ~0UL);
+#endif
 }

arch/arm/mach-mvebu/platsmp.c

+/*
+ * Symmetric Multi Processing (SMP) support for Armada XP
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Yehuda Yitschak <yehuday@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * The Armada XP SoC has 4 ARMv7 PJ4B CPUs running in full HW coherency
+ * This file implements the routines for preparing the SMP infrastructure
+ * and waking up the secondary CPUs
+ */
+
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/clk.h>
+#include <linux/of.h>
+#include <asm/cacheflush.h>
+#include <asm/smp_plat.h>
+#include "common.h"
+#include "armada-370-xp.h"
+#include "pmsu.h"
+#include "coherency.h"
+
+void __init set_secondary_cpus_clock(void)
+{
+	int thiscpu;
+	unsigned long rate;
+	struct clk *cpu_clk = NULL;
+	struct device_node *np = NULL;
+
+	thiscpu = smp_processor_id();
+	for_each_node_by_type(np, "cpu") {
+		int err;
+		int cpu;
+
+		err = of_property_read_u32(np, "reg", &cpu);
+		if (WARN_ON(err))
+			return;
+
+		if (cpu == thiscpu) {
+			cpu_clk = of_clk_get(np, 0);
+			break;
+		}
+	}
+	if (WARN_ON(IS_ERR(cpu_clk)))
+		return;
+	clk_prepare_enable(cpu_clk);
+	rate = clk_get_rate(cpu_clk);
+
+	/* set all the other CPU clk to the same rate than the boot CPU */
+	for_each_node_by_type(np, "cpu") {
+		int err;
+		int cpu;
+
+		err = of_property_read_u32(np, "reg", &cpu);
+		if (WARN_ON(err))
+			return;
+
+		if (cpu != thiscpu) {
+			cpu_clk = of_clk_get(np, 0);
+			clk_set_rate(cpu_clk, rate);
+		}
+	}
+}
+
+static void __cpuinit armada_xp_secondary_init(unsigned int cpu)
+{
+	armada_xp_mpic_smp_cpu_init();
+}
+
+static int __cpuinit armada_xp_boot_secondary(unsigned int cpu,
+					      struct task_struct *idle)
+{
+	pr_info("Booting CPU %d\n", cpu);
+
+	armada_xp_boot_cpu(cpu, armada_xp_secondary_startup);
+
+	return 0;
+}
+
+static void __init armada_xp_smp_init_cpus(void)
+{
+	unsigned int i, ncores;
+	ncores = coherency_get_cpu_count();
+
+	/* Limit possible CPUs to defconfig */
+	if (ncores > nr_cpu_ids) {
+		pr_warn("SMP: %d CPUs physically present. Only %d configured.",
+			ncores, nr_cpu_ids);
+		pr_warn("Clipping CPU count to %d\n", nr_cpu_ids);
+		ncores = nr_cpu_ids;
+	}
+
+	for (i = 0; i < ncores; i++)
+		set_cpu_possible(i, true);
+
+	set_smp_cross_call(armada_mpic_send_doorbell);
+}
+
+void __init armada_xp_smp_prepare_cpus(unsigned int max_cpus)
+{
+	set_secondary_cpus_clock();
+	flush_cache_all();
+	set_cpu_coherent(cpu_logical_map(smp_processor_id()), 0);
+}
+
+struct smp_operations armada_xp_smp_ops __initdata = {
+	.smp_init_cpus		= armada_xp_smp_init_cpus,
+	.smp_prepare_cpus	= armada_xp_smp_prepare_cpus,
+	.smp_secondary_init	= armada_xp_secondary_init,
+	.smp_boot_secondary	= armada_xp_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_die		= armada_xp_cpu_die,
+#endif
+};

arch/arm/mach-mvebu/pmsu.c

+/*
+ * Power Management Service Unit(PMSU) support for Armada 370/XP platforms.
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Yehuda Yitschak <yehuday@marvell.com>
+ * Gregory Clement <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * The Armada 370 and Armada XP SOCs have a power management service
+ * unit which is responsible for powering down and waking up CPUs and
+ * other SOC units
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/of_address.h>
+#include <linux/io.h>
+#include <linux/smp.h>
+#include <asm/smp_plat.h>
+
+static void __iomem *pmsu_mp_base;
+static void __iomem *pmsu_reset_base;
+
+#define PMSU_BOOT_ADDR_REDIRECT_OFFSET(cpu)	((cpu * 0x100) + 0x24)
+#define PMSU_RESET_CTL_OFFSET(cpu)		(cpu * 0x8)
+
+static struct of_device_id of_pmsu_table[] = {
+	{.compatible = "marvell,armada-370-xp-pmsu"},
+	{ /* end of list */ },
+};
+
+#ifdef CONFIG_SMP
+int armada_xp_boot_cpu(unsigned int cpu_id, void *boot_addr)
+{
+	int reg, hw_cpu;
+
+	if (!pmsu_mp_base || !pmsu_reset_base) {
+		pr_warn("Can't boot CPU. PMSU is uninitialized\n");
+		return 1;
+	}
+
+	hw_cpu = cpu_logical_map(cpu_id);
+
+	writel(virt_to_phys(boot_addr), pmsu_mp_base +
+			PMSU_BOOT_ADDR_REDIRECT_OFFSET(hw_cpu));
+
+	/* Release CPU from reset by clearing reset bit*/
+	reg = readl(pmsu_reset_base + PMSU_RESET_CTL_OFFSET(hw_cpu));
+	reg &= (~0x1);
+	writel(reg, pmsu_reset_base + PMSU_RESET_CTL_OFFSET(hw_cpu));
+
+	return 0;
+}
+#endif
+
+int __init armada_370_xp_pmsu_init(void)
+{
+	struct device_node *np;
+
+	np = of_find_matching_node(NULL, of_pmsu_table);
+	if (np) {
+		pr_info("Initializing Power Management Service Unit\n");
+		pmsu_mp_base = of_iomap(np, 0);
+		pmsu_reset_base = of_iomap(np, 1);
+	}
+
+	return 0;
+}
+
+early_initcall(armada_370_xp_pmsu_init);

arch/arm/mach-mvebu/pmsu.h

+/*
+ * Power Management Service Unit (PMSU) support for Armada 370/XP platforms.
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_MVEBU_PMSU_H
+#define __MACH_MVEBU_PMSU_H
+
+int armada_xp_boot_cpu(unsigned int cpu_id, void *phys_addr);
+
+#endif	/* __MACH_370_XP_PMSU_H */

arch/arm/mm/Kconfig

@@ -352,6 +352,10 @@ config CPU_PJ4
 	select ARM_THUMBEE
 	select CPU_V7
 
+config CPU_PJ4B
+	bool
+	select CPU_V7
+
 # ARMv6
 config CPU_V6
 	bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX

arch/arm/mm/dma-mapping.c

@@ -124,8 +124,6 @@ static void arm_dma_sync_single_for_device(struct device *dev,
 	__dma_page_cpu_to_dev(page, offset, size, dir);
 }
 
-static int arm_dma_set_mask(struct device *dev, u64 dma_mask);
-
 struct dma_map_ops arm_dma_ops = {
 	.alloc			= arm_dma_alloc,
 	.free			= arm_dma_free,
@@ -971,7 +969,7 @@ int dma_supported(struct device *dev, u64 mask)
 }
 EXPORT_SYMBOL(dma_supported);
 
-static int arm_dma_set_mask(struct device *dev, u64 dma_mask)
+int arm_dma_set_mask(struct device *dev, u64 dma_mask)
 {
 	if (!dev->dma_mask || !dma_supported(dev, dma_mask))
 		return -EIO;

arch/arm/mm/proc-v7.S

@@ -169,6 +169,63 @@ __v7_ca15mp_setup:
 	orreq	r0, r0, r10			@ Enable CPU-specific SMP bits
 	mcreq	p15, 0, r0, c1, c0, 1
 #endif
+
+__v7_pj4b_setup:
+#ifdef CONFIG_CPU_PJ4B
+
+/* Auxiliary Debug Modes Control 1 Register */
+#define PJ4B_STATIC_BP (1 << 2) /* Enable Static BP */
+#define PJ4B_INTER_PARITY (1 << 8) /* Disable Internal Parity Handling */
+#define PJ4B_BCK_OFF_STREX (1 << 5) /* Enable the back off of STREX instr */
+#define PJ4B_CLEAN_LINE (1 << 16) /* Disable data transfer for clean line */
+
+/* Auxiliary Debug Modes Control 2 Register */
+#define PJ4B_FAST_LDR (1 << 23) /* Disable fast LDR */
+#define PJ4B_SNOOP_DATA (1 << 25) /* Do not interleave write and snoop data */
+#define PJ4B_CWF (1 << 27) /* Disable Critical Word First feature */
+#define PJ4B_OUTSDNG_NC (1 << 29) /* Disable outstanding non cacheable rqst */
+#define PJ4B_L1_REP_RR (1 << 30) /* L1 replacement - Strict round robin */
+#define PJ4B_AUX_DBG_CTRL2 (PJ4B_SNOOP_DATA | PJ4B_CWF |\
+			    PJ4B_OUTSDNG_NC | PJ4B_L1_REP_RR)
+
+/* Auxiliary Functional Modes Control Register 0 */
+#define PJ4B_SMP_CFB (1 << 1) /* Set SMP mode. Join the coherency fabric */
+#define PJ4B_L1_PAR_CHK (1 << 2) /* Support L1 parity checking */
+#define PJ4B_BROADCAST_CACHE (1 << 8) /* Broadcast Cache and TLB maintenance */
+
+/* Auxiliary Debug Modes Control 0 Register */
+#define PJ4B_WFI_WFE (1 << 22) /* WFI/WFE - serve the DVM and back to idle */
+
+	/* Auxiliary Debug Modes Control 1 Register */
+	mrc	p15, 1,	r0, c15, c1, 1
+	orr     r0, r0, #PJ4B_CLEAN_LINE
+	orr     r0, r0, #PJ4B_BCK_OFF_STREX
+	orr     r0, r0, #PJ4B_INTER_PARITY
+	bic	r0, r0, #PJ4B_STATIC_BP
+	mcr	p15, 1,	r0, c15, c1, 1
+
+	/* Auxiliary Debug Modes Control 2 Register */
+	mrc	p15, 1,	r0, c15, c1, 2
+	bic	r0, r0, #PJ4B_FAST_LDR
+	orr	r0, r0, #PJ4B_AUX_DBG_CTRL2
+	mcr	p15, 1,	r0, c15, c1, 2
+
+	/* Auxiliary Functional Modes Control Register 0 */
+	mrc	p15, 1,	r0, c15, c2, 0
+#ifdef CONFIG_SMP
+	orr	r0, r0, #PJ4B_SMP_CFB
+#endif
+	orr	r0, r0, #PJ4B_L1_PAR_CHK
+	orr	r0, r0, #PJ4B_BROADCAST_CACHE
+	mcr	p15, 1,	r0, c15, c2, 0
+
+	/* Auxiliary Debug Modes Control 0 Register */
+	mrc	p15, 1,	r0, c15, c1, 0
+	orr	r0, r0, #PJ4B_WFI_WFE
+	mcr	p15, 1,	r0, c15, c1, 0
+
+#endif /* CONFIG_CPU_PJ4B */
+
 __v7_setup:
 	adr	r12, __v7_setup_stack		@ the local stack
 	stmia	r12, {r0-r5, r7, r9, r11, lr}
@@ -342,6 +399,16 @@ __v7_ca9mp_proc_info:
 	.long	0xff0ffff0
 	__v7_proc __v7_ca9mp_setup
 	.size	__v7_ca9mp_proc_info, . - __v7_ca9mp_proc_info
+
+	/*
+	 * Marvell PJ4B processor.
+	 */
+	.type   __v7_pj4b_proc_info, #object
+__v7_pj4b_proc_info:
+	.long	0x562f5840
+	.long	0xfffffff0
+	__v7_proc __v7_pj4b_setup
+	.size	__v7_pj4b_proc_info, . - __v7_pj4b_proc_info
 #endif	/* CONFIG_ARM_LPAE */
 
 	/*

arch/arm/plat-orion/addr-map.c

@@ -42,6 +42,8 @@ EXPORT_SYMBOL_GPL(mv_mbus_dram_info);
 #define WIN_REMAP_LO_OFF	0x0008
 #define WIN_REMAP_HI_OFF	0x000c
 
+#define ATTR_HW_COHERENCY	(0x1 << 4)
+
 /*
  * Default implementation
  */
@@ -163,6 +165,8 @@ void __init orion_setup_cpu_mbus_target(const struct orion_addr_map_cfg *cfg,
 			w = &orion_mbus_dram_info.cs[cs++];
 			w->cs_index = i;
 			w->mbus_attr = 0xf & ~(1 << i);
+			if (cfg->hw_io_coherency)
+				w->mbus_attr |= ATTR_HW_COHERENCY;
 			w->base = base & 0xffff0000;
 			w->size = (size | 0x0000ffff) + 1;
 		}

arch/arm/plat-orion/common.c

@@ -606,26 +606,6 @@ void __init orion_wdt_init(void)
  ****************************************************************************/
 static u64 orion_xor_dmamask = DMA_BIT_MASK(32);
 
-void __init orion_xor_init_channels(
-	struct mv_xor_platform_data *orion_xor0_data,
-	struct platform_device *orion_xor0_channel,
-	struct mv_xor_platform_data *orion_xor1_data,
-	struct platform_device *orion_xor1_channel)
-{
-	/*
-	 * two engines can't do memset simultaneously, this limitation
-	 * satisfied by removing memset support from one of the engines.
-	 */
-	dma_cap_set(DMA_MEMCPY, orion_xor0_data->cap_mask);
-	dma_cap_set(DMA_XOR, orion_xor0_data->cap_mask);
-	platform_device_register(orion_xor0_channel);
-
-	dma_cap_set(DMA_MEMCPY, orion_xor1_data->cap_mask);
-	dma_cap_set(DMA_MEMSET, orion_xor1_data->cap_mask);
-	dma_cap_set(DMA_XOR, orion_xor1_data->cap_mask);
-	platform_device_register(orion_xor1_channel);
-}
-
 /*****************************************************************************
  * XOR0
  ****************************************************************************/
@@ -636,61 +616,30 @@ static struct resource orion_xor0_shared_resources[] = {
 	}, {
 		.name	= "xor 0 high",
 		.flags	= IORESOURCE_MEM,
+	}, {
+		.name   = "irq channel 0",
+		.flags  = IORESOURCE_IRQ,
+	}, {
+		.name   = "irq channel 1",
+		.flags  = IORESOURCE_IRQ,
 	},
 };
 
-static struct platform_device orion_xor0_shared = {
-	.name		= MV_XOR_SHARED_NAME,
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(orion_xor0_shared_resources),
-	.resource	= orion_xor0_shared_resources,
-};
+static struct mv_xor_channel_data orion_xor0_channels_data[2];
 
-static struct resource orion_xor00_resources[] = {
-	[0] = {
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct mv_xor_platform_data orion_xor00_data = {
-	.shared		= &orion_xor0_shared,
-	.hw_id		= 0,
-	.pool_size	= PAGE_SIZE,
+static struct mv_xor_platform_data orion_xor0_pdata = {
+	.channels = orion_xor0_channels_data,
 };
 
-static struct platform_device orion_xor00_channel = {
+static struct platform_device orion_xor0_shared = {
 	.name		= MV_XOR_NAME,
 	.id		= 0,
-	.num_resources	= ARRAY_SIZE(orion_xor00_resources),
-	.resource	= orion_xor00_resources,
-	.dev		= {
-		.dma_mask		= &orion_xor_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(64),
-		.platform_data		= &orion_xor00_data,
-	},
-};
-
-static struct resource orion_xor01_resources[] = {
-	[0] = {
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct mv_xor_platform_data orion_xor01_data = {
-	.shared		= &orion_xor0_shared,
-	.hw_id		= 1,
-	.pool_size	= PAGE_SIZE,
-};
-
-static struct platform_device orion_xor01_channel = {
-	.name		= MV_XOR_NAME,
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(orion_xor01_resources),
-	.resource	= orion_xor01_resources,
-	.dev		= {
-		.dma_mask		= &orion_xor_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(64),
-		.platform_data		= &orion_xor01_data,
+	.num_resources	= ARRAY_SIZE(orion_xor0_shared_resources),
+	.resource	= orion_xor0_shared_resources,
+	.dev            = {
+		.dma_mask               = &orion_xor_dmamask,
+		.coherent_dma_mask      = DMA_BIT_MASK(64),
+		.platform_data          = &orion_xor0_pdata,
 	},
 };
 
@@ -704,15 +653,23 @@ void __init orion_xor0_init(unsigned long mapbase_low,
 	orion_xor0_shared_resources[1].start = mapbase_high;
 	orion_xor0_shared_resources[1].end = mapbase_high + 0xff;
 
-	orion_xor00_resources[0].start = irq_0;
-	orion_xor00_resources[0].end = irq_0;
-	orion_xor01_resources[0].start = irq_1;
-	orion_xor01_resources[0].end = irq_1;
+	orion_xor0_shared_resources[2].start = irq_0;
+	orion_xor0_shared_resources[2].end = irq_0;
+	orion_xor0_shared_resources[3].start = irq_1;
+	orion_xor0_shared_resources[3].end = irq_1;
 
-	platform_device_register(&orion_xor0_shared);
+	/*
+	 * two engines can't do memset simultaneously, this limitation
+	 * satisfied by removing memset support from one of the engines.
+	 */
+	dma_cap_set(DMA_MEMCPY, orion_xor0_channels_data[0].cap_mask);
+	dma_cap_set(DMA_XOR, orion_xor0_channels_data[0].cap_mask);
+
+	dma_cap_set(DMA_MEMSET, orion_xor0_channels_data[1].cap_mask);
+	dma_cap_set(DMA_MEMCPY, orion_xor0_channels_data[1].cap_mask);
+	dma_cap_set(DMA_XOR, orion_xor0_channels_data[1].cap_mask);
 
-	orion_xor_init_channels(&orion_xor00_data, &orion_xor00_channel,
-				&orion_xor01_data, &orion_xor01_channel);
+	platform_device_register(&orion_xor0_shared);
 }
 
 /*****************************************************************************
@@ -725,61 +682,30 @@ static struct resource orion_xor1_shared_resources[] = {
 	}, {
 		.name	= "xor 1 high",
 		.flags	= IORESOURCE_MEM,
+	}, {
+		.name   = "irq channel 0",
+		.flags  = IORESOURCE_IRQ,
+	}, {
+		.name   = "irq channel 1",
+		.flags  = IORESOURCE_IRQ,
 	},
 };
 
-static struct platform_device orion_xor1_shared = {
-	.name		= MV_XOR_SHARED_NAME,
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(orion_xor1_shared_resources),
-	.resource	= orion_xor1_shared_resources,
-};
-
-static struct resource orion_xor10_resources[] = {
-	[0] = {
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct mv_xor_platform_data orion_xor10_data = {
-	.shared		= &orion_xor1_shared,
-	.hw_id		= 0,
-	.pool_size	= PAGE_SIZE,
-};
-
-static struct platform_device orion_xor10_channel = {
-	.name		= MV_XOR_NAME,
-	.id		= 2,
-	.num_resources	= ARRAY_SIZE(orion_xor10_resources),
-	.resource	= orion_xor10_resources,
-	.dev		= {
-		.dma_mask		= &orion_xor_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(64),
-		.platform_data		= &orion_xor10_data,
-	},
-};
-
-static struct resource orion_xor11_resources[] = {
-	[0] = {
-		.flags	= IORESOURCE_IRQ,
-	},
-};
+static struct mv_xor_channel_data orion_xor1_channels_data[2];
 
-static struct mv_xor_platform_data orion_xor11_data = {
-	.shared		= &orion_xor1_shared,
-	.hw_id		= 1,
-	.pool_size	= PAGE_SIZE,
+static struct mv_xor_platform_data orion_xor1_pdata = {
+	.channels = orion_xor1_channels_data,
 };
 
-static struct platform_device orion_xor11_channel = {
+static struct platform_device orion_xor1_shared = {
 	.name		= MV_XOR_NAME,
-	.id		= 3,
-	.num_resources	= ARRAY_SIZE(orion_xor11_resources),
-	.resource	= orion_xor11_resources,
-	.dev		= {
-		.dma_mask		= &orion_xor_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(64),
-		.platform_data		= &orion_xor11_data,
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(orion_xor1_shared_resources),
+	.resource	= orion_xor1_shared_resources,
+	.dev            = {
+		.dma_mask               = &orion_xor_dmamask,
+		.coherent_dma_mask      = DMA_BIT_MASK(64),
+		.platform_data          = &orion_xor1_pdata,
 	},
 };
 
@@ -793,15 +719,23 @@ void __init orion_xor1_init(unsigned long mapbase_low,
 	orion_xor1_shared_resources[1].start = mapbase_high;
 	orion_xor1_shared_resources[1].end = mapbase_high + 0xff;
 
-	orion_xor10_resources[0].start = irq_0;
-	orion_xor10_resources[0].end = irq_0;
-	orion_xor11_resources[0].start = irq_1;
-	orion_xor11_resources[0].end = irq_1;
+	orion_xor1_shared_resources[2].start = irq_0;
+	orion_xor1_shared_resources[2].end = irq_0;
+	orion_xor1_shared_resources[3].start = irq_1;
+	orion_xor1_shared_resources[3].end = irq_1;
 
-	platform_device_register(&orion_xor1_shared);
+	/*
+	 * two engines can't do memset simultaneously, this limitation
+	 * satisfied by removing memset support from one of the engines.
+	 */
+	dma_cap_set(DMA_MEMCPY, orion_xor1_channels_data[0].cap_mask);
+	dma_cap_set(DMA_XOR, orion_xor1_channels_data[0].cap_mask);
 
-	orion_xor_init_channels(&orion_xor10_data, &orion_xor10_channel,
-				&orion_xor11_data, &orion_xor11_channel);
+	dma_cap_set(DMA_MEMSET, orion_xor1_channels_data[1].cap_mask);
+	dma_cap_set(DMA_MEMCPY, orion_xor1_channels_data[1].cap_mask);
+	dma_cap_set(DMA_XOR, orion_xor1_channels_data[1].cap_mask);
+
+	platform_device_register(&orion_xor1_shared);
 }
 
 /*****************************************************************************

arch/arm/plat-orion/include/plat/addr-map.h

@@ -17,6 +17,7 @@ struct orion_addr_map_cfg {
 	const int num_wins;	/* Total number of windows */
 	const int remappable_wins;
 	void __iomem *bridge_virt_base;
+	int hw_io_coherency;
 
 	/* If NULL, the default cpu_win_can_remap will be used, using
 	   the value in remappable_wins */

arch/arm/plat-orion/include/plat/common.h

@@ -12,6 +12,7 @@
 #include <linux/mv643xx_eth.h>
 
 struct dsa_platform_data;
+struct mv_sata_platform_data;
 
 void __init orion_uart0_init(void __iomem *membase,
 			     resource_size_t mapbase,

drivers/clk/Kconfig

@@ -64,3 +64,5 @@ config CLK_TWL6040
 	  as functional clock.
 
 endmenu
+
+source "drivers/clk/mvebu/Kconfig"

drivers/clk/Makefile

@@ -13,6 +13,7 @@ obj-$(CONFIG_PLAT_SPEAR)	+= spear/
 obj-$(CONFIG_ARCH_U300)		+= clk-u300.o
 obj-$(CONFIG_COMMON_CLK_VERSATILE) += versatile/
 obj-$(CONFIG_ARCH_PRIMA2)	+= clk-prima2.o
+obj-$(CONFIG_PLAT_ORION)	+= mvebu/
 ifeq ($(CONFIG_COMMON_CLK), y)
 obj-$(CONFIG_ARCH_MMP)		+= mmp/
 endif

drivers/clk/mvebu/Kconfig

+config MVEBU_CLK_CORE
+       bool
+
+config MVEBU_CLK_CPU
+       bool
+
+config MVEBU_CLK_GATING
+       bool

drivers/clk/mvebu/Makefile

+obj-$(CONFIG_MVEBU_CLK_CORE) 	+= clk.o clk-core.o
+obj-$(CONFIG_MVEBU_CLK_CPU) 	+= clk-cpu.o
+obj-$(CONFIG_MVEBU_CLK_GATING) 	+= clk-gating-ctrl.o

drivers/clk/mvebu/clk-core.h

+/*
+ *  * Marvell EBU clock core handling defined at reset
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MVEBU_CLK_CORE_H
+#define __MVEBU_CLK_CORE_H
+
+void __init mvebu_core_clk_init(void);
+
+#endif

drivers/clk/mvebu/clk-cpu.c

+/*
+ * Marvell MVEBU CPU clock handling.
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/delay.h>
+#include "clk-cpu.h"
+
+#define SYS_CTRL_CLK_DIVIDER_CTRL_OFFSET    0x0
+#define SYS_CTRL_CLK_DIVIDER_VALUE_OFFSET   0xC
+#define SYS_CTRL_CLK_DIVIDER_MASK	    0x3F
+
+#define MAX_CPU	    4
+struct cpu_clk {
+	struct clk_hw hw;
+	int cpu;
+	const char *clk_name;
+	const char *parent_name;
+	void __iomem *reg_base;
+};
+
+static struct clk **clks;
+
+static struct clk_onecell_data clk_data;
+
+#define to_cpu_clk(p) container_of(p, struct cpu_clk, hw)
+
+static unsigned long clk_cpu_recalc_rate(struct clk_hw *hwclk,
+					 unsigned long parent_rate)
+{
+	struct cpu_clk *cpuclk = to_cpu_clk(hwclk);
+	u32 reg, div;
+
+	reg = readl(cpuclk->reg_base + SYS_CTRL_CLK_DIVIDER_VALUE_OFFSET);
+	div = (reg >> (cpuclk->cpu * 8)) & SYS_CTRL_CLK_DIVIDER_MASK;
+	return parent_rate / div;
+}
+
+static long clk_cpu_round_rate(struct clk_hw *hwclk, unsigned long rate,
+			       unsigned long *parent_rate)
+{
+	/* Valid ratio are 1:1, 1:2 and 1:3 */
+	u32 div;
+
+	div = *parent_rate / rate;
+	if (div == 0)
+		div = 1;
+	else if (div > 3)
+		div = 3;
+
+	return *parent_rate / div;
+}
+
+static int clk_cpu_set_rate(struct clk_hw *hwclk, unsigned long rate,
+			    unsigned long parent_rate)
+{
+	struct cpu_clk *cpuclk = to_cpu_clk(hwclk);
+	u32 reg, div;
+	u32 reload_mask;
+
+	div = parent_rate / rate;
+	reg = (readl(cpuclk->reg_base + SYS_CTRL_CLK_DIVIDER_VALUE_OFFSET)
+		& (~(SYS_CTRL_CLK_DIVIDER_MASK << (cpuclk->cpu * 8))))
+		| (div << (cpuclk->cpu * 8));
+	writel(reg, cpuclk->reg_base + SYS_CTRL_CLK_DIVIDER_VALUE_OFFSET);
+	/* Set clock divider reload smooth bit mask */
+	reload_mask = 1 << (20 + cpuclk->cpu);
+
+	reg = readl(cpuclk->reg_base + SYS_CTRL_CLK_DIVIDER_CTRL_OFFSET)
+	    | reload_mask;
+	writel(reg, cpuclk->reg_base + SYS_CTRL_CLK_DIVIDER_CTRL_OFFSET);
+
+	/* Now trigger the clock update */
+	reg = readl(cpuclk->reg_base + SYS_CTRL_CLK_DIVIDER_CTRL_OFFSET)
+	    | 1 << 24;
+	writel(reg, cpuclk->reg_base + SYS_CTRL_CLK_DIVIDER_CTRL_OFFSET);
+
+	/* Wait for clocks to settle down then clear reload request */
+	udelay(1000);
+	reg &= ~(reload_mask | 1 << 24);
+	writel(reg, cpuclk->reg_base + SYS_CTRL_CLK_DIVIDER_CTRL_OFFSET);
+	udelay(1000);
+
+	return 0;
+}
+
+static const struct clk_ops cpu_ops = {
+	.recalc_rate = clk_cpu_recalc_rate,
+	.round_rate = clk_cpu_round_rate,
+	.set_rate = clk_cpu_set_rate,
+};
+
+void __init of_cpu_clk_setup(struct device_node *node)
+{
+	struct cpu_clk *cpuclk;
+	void __iomem *clock_complex_base = of_iomap(node, 0);
+	int ncpus = 0;
+	struct device_node *dn;
+
+	if (clock_complex_base == NULL) {
+		pr_err("%s: clock-complex base register not set\n",
+			__func__);
+		return;
+	}
+
+	for_each_node_by_type(dn, "cpu")
+		ncpus++;
+
+	cpuclk = kzalloc(ncpus * sizeof(*cpuclk), GFP_KERNEL);
+	if (WARN_ON(!cpuclk))
+		return;
+
+	clks = kzalloc(ncpus * sizeof(*clks), GFP_KERNEL);
+	if (WARN_ON(!clks))
+		return;
+
+	for_each_node_by_type(dn, "cpu") {
+		struct clk_init_data init;
+		struct clk *clk;
+		struct clk *parent_clk;
+		char *clk_name = kzalloc(5, GFP_KERNEL);
+		int cpu, err;
+
+		if (WARN_ON(!clk_name))
+			return;
+
+		err = of_property_read_u32(dn, "reg", &cpu);
+		if (WARN_ON(err))
+			return;
+
+		sprintf(clk_name, "cpu%d", cpu);
+		parent_clk = of_clk_get(node, 0);
+
+		cpuclk[cpu].parent_name = __clk_get_name(parent_clk);
+		cpuclk[cpu].clk_name = clk_name;
+		cpuclk[cpu].cpu = cpu;
+		cpuclk[cpu].reg_base = clock_complex_base;
+		cpuclk[cpu].hw.init = &init;
+
+		init.name = cpuclk[cpu].clk_name;
+		init.ops = &cpu_ops;
+		init.flags = 0;
+		init.parent_names = &cpuclk[cpu].parent_name;
+		init.num_parents = 1;
+
+		clk = clk_register(NULL, &cpuclk[cpu].hw);
+		if (WARN_ON(IS_ERR(clk)))
+			goto bail_out;
+		clks[cpu] = clk;
+	}
+	clk_data.clk_num = MAX_CPU;
+	clk_data.clks = clks;
+	of_clk_add_provider(node, of_clk_src_onecell_get, &clk_data);
+
+	return;
+bail_out:
+	kfree(clks);
+	kfree(cpuclk);
+}
+
+static const __initconst struct of_device_id clk_cpu_match[] = {
+	{
+		.compatible = "marvell,armada-xp-cpu-clock",
+		.data = of_cpu_clk_setup,
+	},
+	{
+		/* sentinel */
+	},
+};
+
+void __init mvebu_cpu_clk_init(void)
+{
+	of_clk_init(clk_cpu_match);
+}

drivers/clk/mvebu/clk-cpu.h

+/*
+ * Marvell MVEBU CPU clock handling.
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MVEBU_CLK_CPU_H
+#define __MVEBU_CLK_CPU_H
+
+#ifdef CONFIG_MVEBU_CLK_CPU
+void __init mvebu_cpu_clk_init(void);
+#else
+static inline void mvebu_cpu_clk_init(void) {}
+#endif
+
+#endif

drivers/clk/mvebu/clk-gating-ctrl.c

+/*
+ * Marvell MVEBU clock gating control.
+ *
+ * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/bitops.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/clk/mvebu.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+struct mvebu_gating_ctrl {
+	spinlock_t lock;
+	struct clk **gates;
+	int num_gates;
+};
+
+struct mvebu_soc_descr {
+	const char *name;
+	const char *parent;
+	int bit_idx;
+};
+
+#define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw)
+
+static struct clk __init *mvebu_clk_gating_get_src(
+	struct of_phandle_args *clkspec, void *data)
+{
+	struct mvebu_gating_ctrl *ctrl = (struct mvebu_gating_ctrl *)data;
+	int n;
+
+	if (clkspec->args_count < 1)
+		return ERR_PTR(-EINVAL);
+
+	for (n = 0; n < ctrl->num_gates; n++) {
+		struct clk_gate *gate =
+			to_clk_gate(__clk_get_hw(ctrl->gates[n]));
+		if (clkspec->args[0] == gate->bit_idx)
+			return ctrl->gates[n];
+	}
+	return ERR_PTR(-ENODEV);
+}
+
+static void __init mvebu_clk_gating_setup(
+	struct device_node *np, const struct mvebu_soc_descr *descr)
+{
+	struct mvebu_gating_ctrl *ctrl;
+	struct clk *clk;
+	void __iomem *base;
+	const char *default_parent = NULL;
+	int n;
+
+	base = of_iomap(np, 0);
+
+	clk = of_clk_get(np, 0);
+	if (!IS_ERR(clk)) {
+		default_parent = __clk_get_name(clk);
+		clk_put(clk);
+	}
+
+	ctrl = kzalloc(sizeof(struct mvebu_gating_ctrl), GFP_KERNEL);
+	if (WARN_ON(!ctrl))
+		return;
+
+	spin_lock_init(&ctrl->lock);
+
+	/*
+	 * Count, allocate, and register clock gates
+	 */
+	for (n = 0; descr[n].name;)
+		n++;
+
+	ctrl->num_gates = n;
+	ctrl->gates = kzalloc(ctrl->num_gates * sizeof(struct clk *),
+			      GFP_KERNEL);
+	if (WARN_ON(!ctrl->gates)) {
+		kfree(ctrl);
+		return;
+	}
+
+	for (n = 0; n < ctrl->num_gates; n++) {
+		u8 flags = 0;
+		const char *parent =
+			(descr[n].parent) ? descr[n].parent : default_parent;
+
+		/*
+		 * On Armada 370, the DDR clock is a special case: it
+		 * isn't taken by any driver, but should anyway be
+		 * kept enabled, so we mark it as IGNORE_UNUSED for
+		 * now.
+		 */
+		if (!strcmp(descr[n].name, "ddr"))
+			flags |= CLK_IGNORE_UNUSED;
+
+		ctrl->gates[n] = clk_register_gate(NULL, descr[n].name, parent,
+				   flags, base, descr[n].bit_idx, 0, &ctrl->lock);
+		WARN_ON(IS_ERR(ctrl->gates[n]));
+	}
+	of_clk_add_provider(np, mvebu_clk_gating_get_src, ctrl);
+}
+
+/*
+ * SoC specific clock gating control
+ */
+
+#ifdef CONFIG_MACH_ARMADA_370
+static const struct mvebu_soc_descr __initconst armada_370_gating_descr[] = {
+	{ "audio", NULL, 0 },
+	{ "pex0_en", NULL, 1 },
+	{ "pex1_en", NULL,  2 },
+	{ "ge1", NULL, 3 },
+	{ "ge0", NULL, 4 },
+	{ "pex0", NULL, 5 },
+	{ "pex1", NULL, 9 },
+	{ "sata0", NULL, 15 },
+	{ "sdio", NULL, 17 },
+	{ "tdm", NULL, 25 },
+	{ "ddr", NULL, 28 },
+	{ "sata1", NULL, 30 },
+	{ }
+};
+#endif
+
+#ifdef CONFIG_MACH_ARMADA_XP
+static const struct mvebu_soc_descr __initconst armada_xp_gating_descr[] = {
+	{ "audio", NULL, 0 },
+	{ "ge3", NULL, 1 },
+	{ "ge2", NULL,  2 },
+	{ "ge1", NULL, 3 },
+	{ "ge0", NULL, 4 },
+	{ "pex0", NULL, 5 },
+	{ "pex1", NULL, 6 },
+	{ "pex2", NULL, 7 },
+	{ "pex3", NULL, 8 },
+	{ "bp", NULL, 13 },
+	{ "sata0lnk", NULL, 14 },
+	{ "sata0", "sata0lnk", 15 },
+	{ "lcd", NULL, 16 },
+	{ "sdio", NULL, 17 },
+	{ "usb0", NULL, 18 },
+	{ "usb1", NULL, 19 },
+	{ "usb2", NULL, 20 },
+	{ "xor0", NULL, 22 },
+	{ "crypto", NULL, 23 },
+	{ "tdm", NULL, 25 },
+	{ "xor1", NULL, 28 },
+	{ "sata1lnk", NULL, 29 },
+	{ "sata1", "sata1lnk", 30 },
+	{ }
+};
+#endif
+
+#ifdef CONFIG_ARCH_DOVE
+static const struct mvebu_soc_descr __initconst dove_gating_descr[] = {
+	{ "usb0", NULL, 0 },
+	{ "usb1", NULL, 1 },
+	{ "ge", "gephy", 2 },
+	{ "sata", NULL, 3 },
+	{ "pex0", NULL, 4 },
+	{ "pex1", NULL, 5 },
+	{ "sdio0", NULL, 8 },
+	{ "sdio1", NULL, 9 },
+	{ "nand", NULL, 10 },
+	{ "camera", NULL, 11 },
+	{ "i2s0", NULL, 12 },
+	{ "i2s1", NULL, 13 },
+	{ "crypto", NULL, 15 },
+	{ "ac97", NULL, 21 },
+	{ "pdma", NULL, 22 },
+	{ "xor0", NULL, 23 },
+	{ "xor1", NULL, 24 },
+	{ "gephy", NULL, 30 },
+	{ }
+};
+#endif
+
+#ifdef CONFIG_ARCH_KIRKWOOD
+static const struct mvebu_soc_descr __initconst kirkwood_gating_descr[] = {
+	{ "ge0", NULL, 0 },
+	{ "pex0", NULL, 2 },
+	{ "usb0", NULL, 3 },
+	{ "sdio", NULL, 4 },
+	{ "tsu", NULL, 5 },
+	{ "runit", NULL, 7 },
+	{ "xor0", NULL, 8 },
+	{ "audio", NULL, 9 },
+	{ "sata0", NULL, 14 },
+	{ "sata1", NULL, 15 },
+	{ "xor1", NULL, 16 },
+	{ "crypto", NULL, 17 },
+	{ "pex1", NULL, 18 },
+	{ "ge1", NULL, 19 },
+	{ "tdm", NULL, 20 },
+	{ }
+};
+#endif
+
+static const __initdata struct of_device_id clk_gating_match[] = {
+#ifdef CONFIG_MACH_ARMADA_370
+	{
+		.compatible = "marvell,armada-370-gating-clock",
+		.data = armada_370_gating_descr,
+	},
+#endif
+
+#ifdef CONFIG_MACH_ARMADA_XP
+	{
+		.compatible = "marvell,armada-xp-gating-clock",
+		.data = armada_xp_gating_descr,
+	},
+#endif
+
+#ifdef CONFIG_ARCH_DOVE
+	{
+		.compatible = "marvell,dove-gating-clock",
+		.data = dove_gating_descr,
+	},
+#endif
+
+#ifdef CONFIG_ARCH_KIRKWOOD
+	{
+		.compatible = "marvell,kirkwood-gating-clock",
+		.data = kirkwood_gating_descr,
+	},
+#endif
+
+	{ }
+};
+
+void __init mvebu_gating_clk_init(void)
+{
+	struct device_node *np;
+
+	for_each_matching_node(np, clk_gating_match) {
+		const struct of_device_id *match =
+			of_match_node(clk_gating_match, np);
+		mvebu_clk_gating_setup(np,
+		       (const struct mvebu_soc_descr *)match->data);
+	}
+}

drivers/clk/mvebu/clk-gating-ctrl.h

+/*
+ * Marvell EBU gating clock handling
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MVEBU_CLK_GATING_H
+#define __MVEBU_CLK_GATING_H
+
+#ifdef CONFIG_MVEBU_CLK_GATING
+void __init mvebu_gating_clk_init(void);
+#else
+void mvebu_gating_clk_init(void) {}
+#endif
+
+#endif

drivers/clk/mvebu/clk.c

+/*
+ * Marvell EBU SoC clock handling.
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <linux/clk/mvebu.h>
+#include <linux/of.h>
+#include "clk-core.h"
+#include "clk-cpu.h"
+#include "clk-gating-ctrl.h"
+
+void __init mvebu_clocks_init(void)
+{
+	mvebu_core_clk_init();
+	mvebu_gating_clk_init();
+	mvebu_cpu_clk_init();
+}

drivers/clocksource/time-armada-370-xp.c

@@ -18,6 +18,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/kernel.h>
+#include <linux/clk.h>
 #include <linux/timer.h>
 #include <linux/clockchips.h>
 #include <linux/interrupt.h>
@@ -167,7 +168,6 @@ void __init armada_370_xp_timer_init(void)
 	u32 u;
 	struct device_node *np;
 	unsigned int timer_clk;
-	int ret;
 	np = of_find_compatible_node(NULL, NULL, "marvell,armada-370-xp-timer");
 	timer_base = of_iomap(np, 0);
 	WARN_ON(!timer_base);
@@ -179,13 +179,14 @@ void __init armada_370_xp_timer_init(void)
 		       timer_base + TIMER_CTRL_OFF);
 		timer_clk = 25000000;
 	} else {
-		u32 clk = 0;
-		ret = of_property_read_u32(np, "clock-frequency", &clk);
-		WARN_ON(!clk || ret < 0);
+		unsigned long rate = 0;
+		struct clk *clk = of_clk_get(np, 0);
+		WARN_ON(IS_ERR(clk));
+		rate =  clk_get_rate(clk);
 		u = readl(timer_base + TIMER_CTRL_OFF);
 		writel(u & ~(TIMER0_25MHZ | TIMER1_25MHZ),
 		       timer_base + TIMER_CTRL_OFF);
-		timer_clk = clk / TIMER_DIVIDER;
+		timer_clk = rate / TIMER_DIVIDER;
 	}
 
 	/* We use timer 0 as clocksource, and timer 1 for

drivers/dma/mv_xor.h

@@ -24,8 +24,10 @@
 #include <linux/interrupt.h>
 
 #define USE_TIMER
+#define MV_XOR_POOL_SIZE		PAGE_SIZE
 #define MV_XOR_SLOT_SIZE		64
 #define MV_XOR_THRESHOLD		1
+#define MV_XOR_MAX_CHANNELS             2
 
 #define XOR_OPERATION_MODE_XOR		0
 #define XOR_OPERATION_MODE_MEMCPY	2
@@ -51,29 +53,13 @@
 #define WINDOW_SIZE(w)		(0x270 + ((w) << 2))
 #define WINDOW_REMAP_HIGH(w)	(0x290 + ((w) << 2))
 #define WINDOW_BAR_ENABLE(chan)	(0x240 + ((chan) << 2))
+#define WINDOW_OVERRIDE_CTRL(chan)	(0x2A0 + ((chan) << 2))
 
-struct mv_xor_shared_private {
-	void __iomem	*xor_base;
-	void __iomem	*xor_high_base;
-	struct clk	*clk;
-};
-
-
-/**
- * struct mv_xor_device - internal representation of a XOR device
- * @pdev: Platform device
- * @id: HW XOR Device selector
- * @dma_desc_pool: base of DMA descriptor region (DMA address)
- * @dma_desc_pool_virt: base of DMA descriptor region (CPU address)
- * @common: embedded struct dma_device
- */
 struct mv_xor_device {
-	struct platform_device		*pdev;
-	int				id;
-	dma_addr_t			dma_desc_pool;
-	void				*dma_desc_pool_virt;
-	struct dma_device		common;
-	struct mv_xor_shared_private	*shared;
+	void __iomem	     *xor_base;
+	void __iomem	     *xor_high_base;
+	struct clk	     *clk;
+	struct mv_xor_chan   *channels[MV_XOR_MAX_CHANNELS];
 };
 
 /**
@@ -96,11 +82,15 @@ struct mv_xor_chan {
 	spinlock_t		lock; /* protects the descriptor slot pool */
 	void __iomem		*mmr_base;
 	unsigned int		idx;
+	int                     irq;
 	enum dma_transaction_type	current_type;
 	struct list_head	chain;
 	struct list_head	completed_slots;
-	struct mv_xor_device	*device;
-	struct dma_chan		common;
+	dma_addr_t		dma_desc_pool;
+	void			*dma_desc_pool_virt;
+	size_t                  pool_size;
+	struct dma_device	dmadev;
+	struct dma_chan		dmachan;
 	struct mv_xor_desc_slot	*last_used;
 	struct list_head	all_slots;
 	int			slots_allocated;

drivers/net/ethernet/marvell/Kconfig

@@ -31,6 +31,30 @@ config MV643XX_ETH
 	  Some boards that use the Discovery chipset are the Momenco
 	  Ocelot C and Jaguar ATX and Pegasos II.
 
+config MVMDIO
+	tristate "Marvell MDIO interface support"
+	---help---
+	  This driver supports the MDIO interface found in the network
+	  interface units of the Marvell EBU SoCs (Kirkwood, Orion5x,
+	  Dove, Armada 370 and Armada XP).
+
+	  For now, this driver is only needed for the MVNETA driver
+	  (used on Armada 370 and XP), but it could be used in the
+	  future by the MV643XX_ETH driver.
+
+config MVNETA
+	tristate "Marvell Armada 370/XP network interface support"
+	depends on MACH_ARMADA_370_XP
+	select PHYLIB
+	select MVMDIO
+	---help---
+	  This driver supports the network interface units in the
+	  Marvell ARMADA XP and ARMADA 370 SoC family.
+
+	  Note that this driver is distinct from the mv643xx_eth
+	  driver, which should be used for the older Marvell SoCs
+	  (Dove, Orion, Discovery, Kirkwood).
+
 config PXA168_ETH
 	tristate "Marvell pxa168 ethernet support"
 	depends on CPU_PXA168

drivers/net/ethernet/marvell/Makefile

@@ -3,6 +3,8 @@
 #
 
 obj-$(CONFIG_MV643XX_ETH) += mv643xx_eth.o
+obj-$(CONFIG_MVMDIO) += mvmdio.o
+obj-$(CONFIG_MVNETA) += mvneta.o
 obj-$(CONFIG_PXA168_ETH) += pxa168_eth.o
 obj-$(CONFIG_SKGE) += skge.o
 obj-$(CONFIG_SKY2) += sky2.o

include/linux/clk/mvebu.h

+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __CLK_MVEBU_H_
+#define __CLK_MVEBU_H_
+
+void __init mvebu_clocks_init(void);
+
+#endif

include/linux/platform_data/dma-mv_xor.h

@@ -10,15 +10,14 @@
 #include <linux/dmaengine.h>
 #include <linux/mbus.h>
 
-#define MV_XOR_SHARED_NAME	"mv_xor_shared"
-#define MV_XOR_NAME		"mv_xor"
+#define MV_XOR_NAME	"mv_xor"
 
-struct mv_xor_platform_data {
-	struct platform_device		*shared;
-	int				hw_id;
+struct mv_xor_channel_data {
 	dma_cap_mask_t			cap_mask;
-	size_t				pool_size;
 };
 
+struct mv_xor_platform_data {
+	struct mv_xor_channel_data    *channels;
+};
 
 #endif