Commit c28f8a1f authored by Marek Vasut's avatar Marek Vasut Committed by Bjorn Helgaas

PCI: imx6: Make reset-gpio optional

Some boards do not have a PCIe reset GPIO.  To avoid probe failure on these
boards, make the reset GPIO optional as well.

[bhelgaas: whitespace fixes]
Signed-off-by: default avatarMarek Vasut <marex@denx.de>
Signed-off-by: default avatarBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: default avatarJingoo Han <jg1.han@samsung.com>
Acked-by: default avatarShawn Guo <shawn.guo@linaro.org>
Cc: Frank Li <lznuaa@gmail.com>
Cc: Harro Haan <hrhaan@gmail.com>
Cc: Mohit KUMAR <Mohit.KUMAR@st.com>
Cc: Pratyush Anand <pratyush.anand@st.com>
Cc: Richard Zhu <r65037@freescale.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Sean Cross <xobs@kosagi.com>
Cc: Siva Reddy Kallam <siva.kallam@samsung.com>
Cc: Srikanth T Shivanand <ts.srikanth@samsung.com>
Cc: Tim Harvey <tharvey@gateworks.com>
Cc: Troy Kisky <troy.kisky@boundarydevices.com>
Cc: Yinghai Lu <yinghai@kernel.org>
parent b391bf31
......@@ -19,6 +19,8 @@ Required properties:
to define the mapping of the PCIe interface to interrupt
numbers.
- num-lanes: number of lanes to use
Optional properties:
- reset-gpio: gpio pin number of power good signal
Optional properties for fsl,imx6q-pcie
......
......@@ -214,9 +214,12 @@ static int imx6_pcie_assert_core_reset(struct pcie_port *pp)
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
IMX6Q_GPR1_PCIE_REF_CLK_EN, 0 << 16);
gpio_set_value(imx6_pcie->reset_gpio, 0);
msleep(100);
gpio_set_value(imx6_pcie->reset_gpio, 1);
/* Some boards don't have PCIe reset GPIO. */
if (gpio_is_valid(imx6_pcie->reset_gpio)) {
gpio_set_value(imx6_pcie->reset_gpio, 0);
msleep(100);
gpio_set_value(imx6_pcie->reset_gpio, 1);
}
return 0;
}
......@@ -432,17 +435,13 @@ static int __init imx6_pcie_probe(struct platform_device *pdev)
/* Fetch GPIOs */
imx6_pcie->reset_gpio = of_get_named_gpio(np, "reset-gpio", 0);
if (!gpio_is_valid(imx6_pcie->reset_gpio)) {
dev_err(&pdev->dev, "no reset-gpio defined\n");
ret = -ENODEV;
}
ret = devm_gpio_request_one(&pdev->dev,
imx6_pcie->reset_gpio,
GPIOF_OUT_INIT_LOW,
"PCIe reset");
if (ret) {
dev_err(&pdev->dev, "unable to get reset gpio\n");
return ret;
if (gpio_is_valid(imx6_pcie->reset_gpio)) {
ret = devm_gpio_request_one(&pdev->dev, imx6_pcie->reset_gpio,
GPIOF_OUT_INIT_LOW, "PCIe reset");
if (ret) {
dev_err(&pdev->dev, "unable to get reset gpio\n");
return ret;
}
}
imx6_pcie->power_on_gpio = of_get_named_gpio(np, "power-on-gpio", 0);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment