Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6: (25 commits)
  avr32: Add hardware power-down function call
  avr32: add include/asm-avr32/serial.h
  avr32: don't offer PARPORT_PC
  avr32: don't offer CONFIG_GEN_RTC
  avr32: don't offer CONFIG_RTC
  add include/asm-avr32/xor.h
  avr32: Remove two unused #defines from mm/init.c
  avr32: Implement set_rate(), set_parent() and mode() for pll1
  avr32: Generic clockevents support
  avr32: Move sleep code into mach-at32ap
  avr32: Use constants from sysreg.h in asm.h
  avr32: Delete mostly unused header asm/intc.h
  avr32: start clocksource cleanup
  avr32: pass i2c board info through at32_add_device_twi
  avr32: cleanup - use _AC macro to define PAGE_SIZE
  Generate raw keyboard codes for AVR32 architecture
  atmel_usba_udc: Add support for AT91CAP9 UDPHS
  atmel_usba_udc: Add missing kfree() in usba_udc_remove()
  atmel_usba_udc: move endpoint declarations into platform data.
  atmel_usba_udc: Kill GPIO_PIN_NONE
  ...

arch/avr32/Kconfig

@@ -47,6 +47,9 @@ config RWSEM_GENERIC_SPINLOCK
 config GENERIC_TIME
 	def_bool y
 
+config GENERIC_CLOCKEVENTS
+	def_bool y
+
 config RWSEM_XCHGADD_ALGORITHM
 	def_bool n
 
@@ -70,6 +73,8 @@ source "init/Kconfig"
 
 menu "System Type and features"
 
+source "kernel/time/Kconfig"
+
 config SUBARCH_AVR32B
 	bool
 config MMU

arch/avr32/kernel/entry-avr32b.S

@@ -741,26 +741,6 @@ irq_level\level:
 
 	.section .irq.text,"ax",@progbits
 
-.global cpu_idle_sleep
-cpu_idle_sleep:
-	mask_interrupts
-	get_thread_info r8
-	ld.w	r9, r8[TI_flags]
-	bld	r9, TIF_NEED_RESCHED
-	brcs	cpu_idle_enable_int_and_exit
-	sbr	r9, TIF_CPU_GOING_TO_SLEEP
-	st.w	r8[TI_flags], r9
-	unmask_interrupts
-	sleep 0
-cpu_idle_skip_sleep:
-	mask_interrupts
-	ld.w	r9, r8[TI_flags]
-	cbr	r9, TIF_CPU_GOING_TO_SLEEP
-	st.w	r8[TI_flags], r9
-cpu_idle_enable_int_and_exit:
-	unmask_interrupts
-	retal	r12
-
 	.global	irq_level0
 	.global	irq_level1
 	.global	irq_level2

arch/avr32/kernel/process.c

@@ -18,11 +18,11 @@
 #include <asm/sysreg.h>
 #include <asm/ocd.h>
 
+#include <asm/arch/pm.h>
+
 void (*pm_power_off)(void) = NULL;
 EXPORT_SYMBOL(pm_power_off);
 
-extern void cpu_idle_sleep(void);
-
 /*
  * This file handles the architecture-dependent parts of process handling..
  */
@@ -54,6 +54,8 @@ void machine_halt(void)
 
 void machine_power_off(void)
 {
+	if (pm_power_off)
+		pm_power_off();
 }
 
 void machine_restart(char *cmd)

arch/avr32/kernel/time.c

 /*
  * Copyright (C) 2004-2007 Atmel Corporation
  *
- * Based on MIPS implementation arch/mips/kernel/time.c
- *   Copyright 2001 MontaVista Software Inc.
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-
 #include <linux/clk.h>
-#include <linux/clocksource.h>
+#include <linux/clockchips.h>
 #include <linux/time.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
@@ -27,207 +23,133 @@
 #include <asm/io.h>
 #include <asm/sections.h>
 
-/* how many counter cycles in a jiffy? */
-static u32 cycles_per_jiffy;
+#include <asm/arch/pm.h>
 
-/* the count value for the next timer interrupt */
-static u32 expirelo;
 
-cycle_t __weak read_cycle_count(void)
+static cycle_t read_cycle_count(void)
 {
 	return (cycle_t)sysreg_read(COUNT);
 }
 
-struct clocksource __weak clocksource_avr32 = {
-	.name		= "avr32",
-	.rating		= 350,
+/*
+ * The architectural cycle count registers are a fine clocksource unless
+ * the system idle loop use sleep states like "idle":  the CPU cycles
+ * measured by COUNT (and COMPARE) don't happen during sleep states.
+ * Their duration also changes if cpufreq changes the CPU clock rate.
+ * So we rate the clocksource using COUNT as very low quality.
+ */
+static struct clocksource counter = {
+	.name		= "avr32_counter",
+	.rating		= 50,
 	.read		= read_cycle_count,
 	.mask		= CLOCKSOURCE_MASK(32),
 	.shift		= 16,
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-irqreturn_t __weak timer_interrupt(int irq, void *dev_id);
-
-struct irqaction timer_irqaction = {
-	.handler	= timer_interrupt,
-	.flags		= IRQF_DISABLED,
-	.name		= "timer",
-};
+static irqreturn_t timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evdev = dev_id;
 
-/*
- * By default we provide the null RTC ops
+	/*
+	 * Disable the interrupt until the clockevent subsystem
+	 * reprograms it.
 	 */
-static unsigned long null_rtc_get_time(void)
-{
-	return mktime(2007, 1, 1, 0, 0, 0);
-}
+	sysreg_write(COMPARE, 0);
 
-static int null_rtc_set_time(unsigned long sec)
-{
-	return 0;
+	evdev->event_handler(evdev);
+	return IRQ_HANDLED;
 }
 
-static unsigned long (*rtc_get_time)(void) = null_rtc_get_time;
-static int (*rtc_set_time)(unsigned long) = null_rtc_set_time;
-
-static void avr32_timer_ack(void)
-{
-	u32 count;
-
-	/* Ack this timer interrupt and set the next one */
-	expirelo += cycles_per_jiffy;
-	/* setting COMPARE to 0 stops the COUNT-COMPARE */
-	if (expirelo == 0) {
-		sysreg_write(COMPARE, expirelo + 1);
-	} else {
-		sysreg_write(COMPARE, expirelo);
-	}
-
-	/* Check to see if we have missed any timer interrupts */
-	count = sysreg_read(COUNT);
-	if ((count - expirelo) < 0x7fffffff) {
-		expirelo = count + cycles_per_jiffy;
-		sysreg_write(COMPARE, expirelo);
-	}
-}
+static struct irqaction timer_irqaction = {
+	.handler	= timer_interrupt,
+	.flags		= IRQF_TIMER | IRQF_DISABLED,
+	.name		= "avr32_comparator",
+};
 
-int __weak avr32_hpt_init(void)
+static int comparator_next_event(unsigned long delta,
+		struct clock_event_device *evdev)
 {
-	int ret;
-	unsigned long mult, shift, count_hz;
-
-	count_hz = clk_get_rate(boot_cpu_data.clk);
-	shift = clocksource_avr32.shift;
-	mult = clocksource_hz2mult(count_hz, shift);
-	clocksource_avr32.mult = mult;
-
-	{
-		u64 tmp;
+	unsigned long	flags;
 
-		tmp = TICK_NSEC;
-		tmp <<= shift;
-		tmp += mult / 2;
-		do_div(tmp, mult);
-
-		cycles_per_jiffy = tmp;
-	}
+	raw_local_irq_save(flags);
 
-	ret = setup_irq(0, &timer_irqaction);
-	if (ret) {
-		pr_debug("timer: could not request IRQ 0: %d\n", ret);
-		return -ENODEV;
-	}
-
-	printk(KERN_INFO "timer: AT32AP COUNT-COMPARE at irq 0, "
-			"%lu.%03lu MHz\n",
-			((count_hz + 500) / 1000) / 1000,
-			((count_hz + 500) / 1000) % 1000);
-
-	return 0;
-}
-
-/*
- * Taken from MIPS c0_hpt_timer_init().
- *
- * The reason COUNT is written twice is probably to make sure we don't get any
- * timer interrupts while we are messing with the counter.
+	/* The time to read COUNT then update COMPARE must be less
+	 * than the min_delta_ns value for this clockevent source.
 	 */
-int __weak avr32_hpt_start(void)
-{
-	u32 count = sysreg_read(COUNT);
-	expirelo = (count / cycles_per_jiffy + 1) * cycles_per_jiffy;
-	sysreg_write(COUNT, expirelo - cycles_per_jiffy);
-	sysreg_write(COMPARE, expirelo);
-	sysreg_write(COUNT, count);
+	sysreg_write(COMPARE, (sysreg_read(COUNT) + delta) ? : 1);
+
+	raw_local_irq_restore(flags);
 
 	return 0;
 }
 
-/*
- * local_timer_interrupt() does profiling and process accounting on a
- * per-CPU basis.
- *
- * In UP mode, it is invoked from the (global) timer_interrupt.
- */
-void local_timer_interrupt(int irq, void *dev_id)
+static void comparator_mode(enum clock_event_mode mode,
+		struct clock_event_device *evdev)
 {
-	if (current->pid)
-		profile_tick(CPU_PROFILING);
-	update_process_times(user_mode(get_irq_regs()));
+	switch (mode) {
+	case CLOCK_EVT_MODE_ONESHOT:
+		pr_debug("%s: start\n", evdev->name);
+		/* FALLTHROUGH */
+	case CLOCK_EVT_MODE_RESUME:
+		cpu_disable_idle_sleep();
+		break;
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+		sysreg_write(COMPARE, 0);
+		pr_debug("%s: stop\n", evdev->name);
+		cpu_enable_idle_sleep();
+		break;
+	default:
+		BUG();
+	}
 }
 
-irqreturn_t __weak timer_interrupt(int irq, void *dev_id)
-{
-	/* ack timer interrupt and try to set next interrupt */
-	avr32_timer_ack();
-
-	/*
-	 * Call the generic timer interrupt handler
-	 */
-	write_seqlock(&xtime_lock);
-	do_timer(1);
-	write_sequnlock(&xtime_lock);
-
-	/*
-	 * In UP mode, we call local_timer_interrupt() to do profiling
-	 * and process accounting.
-	 *
-	 * SMP is not supported yet.
-	 */
-	local_timer_interrupt(irq, dev_id);
-
-	return IRQ_HANDLED;
-}
+static struct clock_event_device comparator = {
+	.name		= "avr32_comparator",
+	.features	= CLOCK_EVT_FEAT_ONESHOT,
+	.shift		= 16,
+	.rating		= 50,
+	.cpumask	= CPU_MASK_CPU0,
+	.set_next_event	= comparator_next_event,
+	.set_mode	= comparator_mode,
+};
 
 void __init time_init(void)
 {
+	unsigned long counter_hz;
 	int ret;
 
-	/*
-	 * Make sure we don't get any COMPARE interrupts before we can
-	 * handle them.
-	 */
-	sysreg_write(COMPARE, 0);
-
-	xtime.tv_sec = rtc_get_time();
+	xtime.tv_sec = mktime(2007, 1, 1, 0, 0, 0);
 	xtime.tv_nsec = 0;
 
 	set_normalized_timespec(&wall_to_monotonic,
 				-xtime.tv_sec, -xtime.tv_nsec);
 
-	ret = avr32_hpt_init();
-	if (ret) {
-		pr_debug("timer: failed setup: %d\n", ret);
-		return;
-	}
+	/* figure rate for counter */
+	counter_hz = clk_get_rate(boot_cpu_data.clk);
+	counter.mult = clocksource_hz2mult(counter_hz, counter.shift);
 
-	ret = clocksource_register(&clocksource_avr32);
+	ret = clocksource_register(&counter);
 	if (ret)
 		pr_debug("timer: could not register clocksource: %d\n", ret);
 
-	ret = avr32_hpt_start();
-	if (ret) {
-		pr_debug("timer: failed starting: %d\n", ret);
-		return;
-	}
-}
+	/* setup COMPARE clockevent */
+	comparator.mult = div_sc(counter_hz, NSEC_PER_SEC, comparator.shift);
+	comparator.max_delta_ns = clockevent_delta2ns((u32)~0, &comparator);
+	comparator.min_delta_ns = clockevent_delta2ns(50, &comparator) + 1;
 
-static struct sysdev_class timer_class = {
-	.name = "timer",
-};
+	sysreg_write(COMPARE, 0);
+	timer_irqaction.dev_id = &comparator;
 
-static struct sys_device timer_device = {
-	.id	= 0,
-	.cls	= &timer_class,
-};
+	ret = setup_irq(0, &timer_irqaction);
+	if (ret)
+		pr_debug("timer: could not request IRQ 0: %d\n", ret);
+	else {
+		clockevents_register_device(&comparator);
 
-static int __init init_timer_sysfs(void)
-{
-	int err = sysdev_class_register(&timer_class);
-	if (!err)
-		err = sysdev_register(&timer_device);
-	return err;
+		pr_info("%s: irq 0, %lu.%03lu MHz\n", comparator.name,
+				((counter_hz + 500) / 1000) / 1000,
+				((counter_hz + 500) / 1000) % 1000);
+	}
 }
-
-device_initcall(init_timer_sysfs);

arch/avr32/mach-at32ap/Makefile

 obj-y				+= at32ap.o clock.o intc.o extint.o pio.o hsmc.o
-obj-$(CONFIG_CPU_AT32AP700X)	+= at32ap700x.o
-obj-$(CONFIG_CPU_AT32AP700X)	+= time-tc.o
+obj-$(CONFIG_CPU_AT32AP700X)	+= at32ap700x.o pm-at32ap700x.o
 obj-$(CONFIG_CPU_FREQ_AT32AP)	+= cpufreq.o

arch/avr32/mach-at32ap/at32ap700x.c

@@ -6,11 +6,13 @@
  * published by the Free Software Foundation.
  */
 #include <linux/clk.h>
+#include <linux/delay.h>
 #include <linux/fb.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/spi/spi.h>
+#include <linux/usb/atmel_usba_udc.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -98,6 +100,9 @@ unsigned long at32ap7000_osc_rates[3] = {
 	[2] = 12000000,
 };
 
+static struct clk osc0;
+static struct clk osc1;
+
 static unsigned long osc_get_rate(struct clk *clk)
 {
 	return at32ap7000_osc_rates[clk->index];
@@ -107,9 +112,6 @@ static unsigned long pll_get_rate(struct clk *clk, unsigned long control)
 {
 	unsigned long div, mul, rate;
 
-	if (!(control & PM_BIT(PLLEN)))
-		return 0;
-
 	div = PM_BFEXT(PLLDIV, control) + 1;
 	mul = PM_BFEXT(PLLMUL, control) + 1;
 
@@ -120,6 +122,71 @@ static unsigned long pll_get_rate(struct clk *clk, unsigned long control)
 	return rate;
 }
 
+static long pll_set_rate(struct clk *clk, unsigned long rate,
+			 u32 *pll_ctrl)
+{
+	unsigned long mul;
+	unsigned long mul_best_fit = 0;
+	unsigned long div;
+	unsigned long div_min;
+	unsigned long div_max;
+	unsigned long div_best_fit = 0;
+	unsigned long base;
+	unsigned long pll_in;
+	unsigned long actual = 0;
+	unsigned long rate_error;
+	unsigned long rate_error_prev = ~0UL;
+	u32 ctrl;
+
+	/* Rate must be between 80 MHz and 200 Mhz. */
+	if (rate < 80000000UL || rate > 200000000UL)
+		return -EINVAL;
+
+	ctrl = PM_BF(PLLOPT, 4);
+	base = clk->parent->get_rate(clk->parent);
+
+	/* PLL input frequency must be between 6 MHz and 32 MHz. */
+	div_min = DIV_ROUND_UP(base, 32000000UL);
+	div_max = base / 6000000UL;
+
+	if (div_max < div_min)
+		return -EINVAL;
+
+	for (div = div_min; div <= div_max; div++) {
+		pll_in = (base + div / 2) / div;
+		mul = (rate + pll_in / 2) / pll_in;
+
+		if (mul == 0)
+			continue;
+
+		actual = pll_in * mul;
+		rate_error = abs(actual - rate);
+
+		if (rate_error < rate_error_prev) {
+			mul_best_fit = mul;
+			div_best_fit = div;
+			rate_error_prev = rate_error;
+		}
+
+		if (rate_error == 0)
+			break;
+	}
+
+	if (div_best_fit == 0)
+		return -EINVAL;
+
+	ctrl |= PM_BF(PLLMUL, mul_best_fit - 1);
+	ctrl |= PM_BF(PLLDIV, div_best_fit - 1);
+	ctrl |= PM_BF(PLLCOUNT, 16);
+
+	if (clk->parent == &osc1)
+		ctrl |= PM_BIT(PLLOSC);
+
+	*pll_ctrl = ctrl;
+
+	return actual;
+}
+
 static unsigned long pll0_get_rate(struct clk *clk)
 {
 	u32 control;
@@ -129,6 +196,41 @@ static unsigned long pll0_get_rate(struct clk *clk)
 	return pll_get_rate(clk, control);
 }
 
+static void pll1_mode(struct clk *clk, int enabled)
+{
+	unsigned long timeout;
+	u32 status;
+	u32 ctrl;
+
+	ctrl = pm_readl(PLL1);
+
+	if (enabled) {
+		if (!PM_BFEXT(PLLMUL, ctrl) && !PM_BFEXT(PLLDIV, ctrl)) {
+			pr_debug("clk %s: failed to enable, rate not set\n",
+					clk->name);
+			return;
+		}
+
+		ctrl |= PM_BIT(PLLEN);
+		pm_writel(PLL1, ctrl);
+
+		/* Wait for PLL lock. */
+		for (timeout = 10000; timeout; timeout--) {
+			status = pm_readl(ISR);
+			if (status & PM_BIT(LOCK1))
+				break;
+			udelay(10);
+		}
+
+		if (!(status & PM_BIT(LOCK1)))
+			printk(KERN_ERR "clk %s: timeout waiting for lock\n",
+					clk->name);
+	} else {
+		ctrl &= ~PM_BIT(PLLEN);
+		pm_writel(PLL1, ctrl);
+	}
+}
+
 static unsigned long pll1_get_rate(struct clk *clk)
 {
 	u32 control;
@@ -138,6 +240,49 @@ static unsigned long pll1_get_rate(struct clk *clk)
 	return pll_get_rate(clk, control);
 }
 
+static long pll1_set_rate(struct clk *clk, unsigned long rate, int apply)
+{
+	u32 ctrl = 0;
+	unsigned long actual_rate;
+
+	actual_rate = pll_set_rate(clk, rate, &ctrl);
+
+	if (apply) {
+		if (actual_rate != rate)
+			return -EINVAL;
+		if (clk->users > 0)
+			return -EBUSY;
+		pr_debug(KERN_INFO "clk %s: new rate %lu (actual rate %lu)\n",
+				clk->name, rate, actual_rate);
+		pm_writel(PLL1, ctrl);
+	}
+
+	return actual_rate;
+}
+
+static int pll1_set_parent(struct clk *clk, struct clk *parent)
+{
+	u32 ctrl;
+
+	if (clk->users > 0)
+		return -EBUSY;
+
+	ctrl = pm_readl(PLL1);
+	WARN_ON(ctrl & PM_BIT(PLLEN));
+
+	if (parent == &osc0)
+		ctrl &= ~PM_BIT(PLLOSC);
+	else if (parent == &osc1)
+		ctrl |= PM_BIT(PLLOSC);
+	else
+		return -EINVAL;
+
+	pm_writel(PLL1, ctrl);
+	clk->parent = parent;
+
+	return 0;
+}
+
 /*
  * The AT32AP7000 has five primary clock sources: One 32kHz
  * oscillator, two crystal oscillators and two PLLs.
@@ -166,7 +311,10 @@ static struct clk pll0 = {
 };
 static struct clk pll1 = {
 	.name		= "pll1",
+	.mode		= pll1_mode,
 	.get_rate	= pll1_get_rate,
+	.set_rate	= pll1_set_rate,
+	.set_parent	= pll1_set_parent,
 	.parent		= &osc0,
 };
 
@@ -605,19 +753,32 @@ static inline void set_ebi_sfr_bits(u32 mask)
 }
 
 /* --------------------------------------------------------------------
- *  System Timer/Counter (TC)
+ *  Timer/Counter (TC)
  * -------------------------------------------------------------------- */
-static struct resource at32_systc0_resource[] = {
+
+static struct resource at32_tcb0_resource[] = {
 	PBMEM(0xfff00c00),
 	IRQ(22),
 };
-struct platform_device at32_systc0_device = {
-	.name		= "systc",
+static struct platform_device at32_tcb0_device = {
+	.name		= "atmel_tcb",
 	.id		= 0,
-	.resource	= at32_systc0_resource,
-	.num_resources	= ARRAY_SIZE(at32_systc0_resource),
+	.resource	= at32_tcb0_resource,
+	.num_resources	= ARRAY_SIZE(at32_tcb0_resource),
+};
+DEV_CLK(t0_clk, at32_tcb0, pbb, 3);
+
+static struct resource at32_tcb1_resource[] = {
+	PBMEM(0xfff01000),
+	IRQ(23),
+};
+static struct platform_device at32_tcb1_device = {
+	.name		= "atmel_tcb",
+	.id		= 1,
+	.resource	= at32_tcb1_resource,
+	.num_resources	= ARRAY_SIZE(at32_tcb1_resource),
 };
-DEV_CLK(pclk, at32_systc0, pbb, 3);
+DEV_CLK(t0_clk, at32_tcb1, pbb, 4);
 
 /* --------------------------------------------------------------------
  *  PIO
@@ -669,7 +830,8 @@ void __init at32_add_system_devices(void)
 	platform_device_register(&pdc_device);
 	platform_device_register(&dmaca0_device);
 
-	platform_device_register(&at32_systc0_device);
+	platform_device_register(&at32_tcb0_device);
+	platform_device_register(&at32_tcb1_device);
 
 	platform_device_register(&pio0_device);
 	platform_device_register(&pio1_device);
@@ -989,7 +1151,9 @@ static struct clk atmel_twi0_pclk = {
 	.index		= 2,
 };
 
-struct platform_device *__init at32_add_device_twi(unsigned int id)
+struct platform_device *__init at32_add_device_twi(unsigned int id,
+						    struct i2c_board_info *b,
+						    unsigned int n)
 {
 	struct platform_device *pdev;
 
@@ -1009,6 +1173,9 @@ struct platform_device *__init at32_add_device_twi(unsigned int id)
 
 	atmel_twi0_pclk.dev = &pdev->dev;
 
+	if (b)
+		i2c_register_board_info(id, b, n);
+
 	platform_device_add(pdev);
 	return pdev;
 
@@ -1351,9 +1518,39 @@ static struct clk usba0_hclk = {
 	.index		= 6,
 };
 
+#define EP(nam, idx, maxpkt, maxbk, dma, isoc)			\
+	[idx] = {						\
+		.name		= nam,				\
+		.index		= idx,				\
+		.fifo_size	= maxpkt,			\
+		.nr_banks	= maxbk,			\
+		.can_dma	= dma,				\
+		.can_isoc	= isoc,				\
+	}
+
+static struct usba_ep_data at32_usba_ep[] __initdata = {
+	EP("ep0",     0,   64, 1, 0, 0),
+	EP("ep1",     1,  512, 2, 1, 1),
+	EP("ep2",     2,  512, 2, 1, 1),
+	EP("ep3-int", 3,   64, 3, 1, 0),
+	EP("ep4-int", 4,   64, 3, 1, 0),
+	EP("ep5",     5, 1024, 3, 1, 1),
+	EP("ep6",     6, 1024, 3, 1, 1),
+};
+
+#undef EP
+
 struct platform_device *__init
 at32_add_device_usba(unsigned int id, struct usba_platform_data *data)
 {
+	/*
+	 * pdata doesn't have room for any endpoints, so we need to
+	 * append room for the ones we need right after it.
+	 */
+	struct {
+		struct usba_platform_data pdata;
+		struct usba_ep_data ep[7];
+	} usba_data;
 	struct platform_device *pdev;
 
 	if (id != 0)
@@ -1367,13 +1564,20 @@ at32_add_device_usba(unsigned int id, struct usba_platform_data *data)
 					  ARRAY_SIZE(usba0_resource)))
 		goto out_free_pdev;
 
-	if (data) {
-		if (platform_device_add_data(pdev, data, sizeof(*data)))
+	if (data)
+		usba_data.pdata.vbus_pin = data->vbus_pin;
+	else
+		usba_data.pdata.vbus_pin = -EINVAL;
+
+	data = &usba_data.pdata;
+	data->num_ep = ARRAY_SIZE(at32_usba_ep);
+	memcpy(data->ep, at32_usba_ep, sizeof(at32_usba_ep));
+
+	if (platform_device_add_data(pdev, data, sizeof(usba_data)))
 		goto out_free_pdev;
 
-		if (data->vbus_pin != GPIO_PIN_NONE)
+	if (data->vbus_pin >= 0)
 		at32_select_gpio(data->vbus_pin, 0);
-	}
 
 	usba0_pclk.dev = &pdev->dev;
 	usba0_hclk.dev = &pdev->dev;
@@ -1694,7 +1898,8 @@ struct clk *at32_clock_list[] = {
 	&pio2_mck,
 	&pio3_mck,
 	&pio4_mck,
-	&at32_systc0_pclk,
+	&at32_tcb0_t0_clk,
+	&at32_tcb1_t0_clk,
 	&atmel_usart0_usart,
 	&atmel_usart1_usart,
 	&atmel_usart2_usart,

arch/avr32/mach-at32ap/intc.c

@@ -13,7 +13,6 @@
 #include <linux/irq.h>
 #include <linux/platform_device.h>
 
-#include <asm/intc.h>
 #include <asm/io.h>
 
 #include "intc.h"

arch/avr32/mach-at32ap/pm-at32ap700x.S

+/*
+ * Low-level Power Management code.
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <asm/asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/thread_info.h>
+#include <asm/arch/pm.h>
+
+	.section .bss, "wa", @nobits
+	.global	disable_idle_sleep
+	.type	disable_idle_sleep, @object
+disable_idle_sleep:
+	.int	4
+	.size	disable_idle_sleep, . - disable_idle_sleep
+
+	/* Keep this close to the irq handlers */
+	.section .irq.text, "ax", @progbits
+
+	/*
+	 * void cpu_enter_idle(void)
+	 *
+	 * Put the CPU into "idle" mode, in which it will consume
+	 * significantly less power.
+	 *
+	 * If an interrupt comes along in the window between
+	 * unmask_interrupts and the sleep instruction below, the
+	 * interrupt code will adjust the return address so that we
+	 * never execute the sleep instruction. This is required
+	 * because the AP7000 doesn't unmask interrupts when entering
+	 * sleep modes; later CPUs may not need this workaround.
+	 */
+	.global	cpu_enter_idle
+	.type	cpu_enter_idle, @function
+cpu_enter_idle:
+	mask_interrupts
+	get_thread_info r8
+	ld.w	r9, r8[TI_flags]
+	bld	r9, TIF_NEED_RESCHED
+	brcs	.Lret_from_sleep
+	sbr	r9, TIF_CPU_GOING_TO_SLEEP
+	st.w	r8[TI_flags], r9
+	unmask_interrupts
+	sleep	CPU_SLEEP_IDLE
+	.size	cpu_idle_sleep, . - cpu_idle_sleep
+
+	/*
+	 * Common return path for PM functions that don't run from
+	 * SRAM.
+	 */
+	.global cpu_idle_skip_sleep
+	.type	cpu_idle_skip_sleep, @function
+cpu_idle_skip_sleep:
+	mask_interrupts
+	ld.w	r9, r8[TI_flags]
+	cbr	r9, TIF_CPU_GOING_TO_SLEEP
+	st.w	r8[TI_flags], r9
+.Lret_from_sleep:
+	unmask_interrupts
+	retal	r12
+	.size	cpu_idle_skip_sleep, . - cpu_idle_skip_sleep

arch/avr32/mach-at32ap/time-tc.c

-/*
- * Copyright (C) 2004-2007 Atmel Corporation
- *
- * Based on MIPS implementation arch/mips/kernel/time.c
- *   Copyright 2001 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/clk.h>
-#include <linux/clocksource.h>
-#include <linux/time.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/kernel_stat.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/profile.h>
-#include <linux/sysdev.h>
-#include <linux/err.h>
-
-#include <asm/div64.h>
-#include <asm/sysreg.h>
-#include <asm/io.h>
-#include <asm/sections.h>
-
-#include <asm/arch/time.h>
-
-/* how many counter cycles in a jiffy? */
-static u32 cycles_per_jiffy;
-
-/* the count value for the next timer interrupt */
-static u32 expirelo;
-
-/* the I/O registers of the TC module */
-static void __iomem *ioregs;
-
-cycle_t read_cycle_count(void)
-{
-	return (cycle_t)timer_read(ioregs, 0, CV);
-}
-
-struct clocksource clocksource_avr32 = {
-	.name		= "avr32",
-	.rating		= 342,
-	.read		= read_cycle_count,
-	.mask		= CLOCKSOURCE_MASK(16),
-	.shift		= 16,
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static void avr32_timer_ack(void)
-{
-	u16 count = expirelo;
-
-	/* Ack this timer interrupt and set the next one, use a u16
-	 * variable so it will wrap around correctly */
-	count += cycles_per_jiffy;
-	expirelo = count;
-	timer_write(ioregs, 0, RC, expirelo);
-
-	/* Check to see if we have missed any timer interrupts */
-	count = timer_read(ioregs, 0, CV);
-	if ((count - expirelo) < 0x7fff) {
-		expirelo = count + cycles_per_jiffy;
-		timer_write(ioregs, 0, RC, expirelo);
-	}
-}
-
-u32 avr32_hpt_read(void)
-{
-	return timer_read(ioregs, 0, CV);
-}
-
-static int avr32_timer_calc_div_and_set_jiffies(struct clk *pclk)
-{
-	unsigned int cycles_max = (clocksource_avr32.mask + 1) / 2;
-	unsigned int divs[] = { 4, 8, 16, 32 };
-	int divs_size = ARRAY_SIZE(divs);
-	int i = 0;
-	unsigned long count_hz;
-	unsigned long shift;
-	unsigned long mult;
-	int clock_div = -1;
-	u64 tmp;
-
-	shift = clocksource_avr32.shift;
-
-	do {
-		count_hz = clk_get_rate(pclk) / divs[i];
-		mult = clocksource_hz2mult(count_hz, shift);
-		clocksource_avr32.mult = mult;
-
-		tmp = TICK_NSEC;
-		tmp <<= shift;
-		tmp += mult / 2;
-		do_div(tmp, mult);
-
-		cycles_per_jiffy = tmp;
-	} while (cycles_per_jiffy > cycles_max && ++i < divs_size);
-
-	clock_div = i + 1;
-
-	if (clock_div > divs_size) {
-		pr_debug("timer: could not calculate clock divider\n");
-		return -EFAULT;
-	}
-
-	/* Set the clock divider */
-	timer_write(ioregs, 0, CMR, TIMER_BF(CMR_TCCLKS, clock_div));
-
-	return 0;
-}
-
-int avr32_hpt_init(unsigned int count)
-{
-	struct resource *regs;
-	struct clk *pclk;
-	int irq = -1;
-	int ret = 0;
-
-	ret = -ENXIO;
-
-	irq = platform_get_irq(&at32_systc0_device, 0);
-	if (irq < 0) {
-		pr_debug("timer: could not get irq\n");
-		goto out_error;
-	}
-
-	pclk = clk_get(&at32_systc0_device.dev, "pclk");
-	if (IS_ERR(pclk)) {
-		pr_debug("timer: could not get clk: %ld\n", PTR_ERR(pclk));
-		goto out_error;
-	}
-	clk_enable(pclk);
-
-	regs = platform_get_resource(&at32_systc0_device, IORESOURCE_MEM, 0);
-	if (!regs) {
-		pr_debug("timer: could not get resource\n");
-		goto out_error_clk;
-	}
-
-	ioregs = ioremap(regs->start, regs->end - regs->start + 1);
-	if (!ioregs) {
-		pr_debug("timer: could not get ioregs\n");
-		goto out_error_clk;
-	}
-
-	ret = avr32_timer_calc_div_and_set_jiffies(pclk);
-	if (ret)
-		goto out_error_io;
-
-	ret = setup_irq(irq, &timer_irqaction);
-	if (ret) {
-		pr_debug("timer: could not request irq %d: %d\n",
-				irq, ret);
-		goto out_error_io;
-	}
-
-	expirelo = (timer_read(ioregs, 0, CV) / cycles_per_jiffy + 1)
-		* cycles_per_jiffy;
-
-	/* Enable clock and interrupts on RC compare */
-	timer_write(ioregs, 0, CCR, TIMER_BIT(CCR_CLKEN));
-	timer_write(ioregs, 0, IER, TIMER_BIT(IER_CPCS));
-	/* Set cycles to first interrupt */
-	timer_write(ioregs, 0,  RC, expirelo);
-
-	printk(KERN_INFO "timer: AT32AP system timer/counter at 0x%p irq %d\n",
-			ioregs, irq);
-
-	return 0;
-
-out_error_io:
-	iounmap(ioregs);
-out_error_clk:
-	clk_put(pclk);
-out_error:
-	return ret;
-}
-
-int avr32_hpt_start(void)
-{
-	timer_write(ioregs, 0, CCR, TIMER_BIT(CCR_SWTRG));
-	return 0;
-}
-
-irqreturn_t timer_interrupt(int irq, void *dev_id)
-{
-	unsigned int sr = timer_read(ioregs, 0, SR);
-
-	if (sr & TIMER_BIT(SR_CPCS)) {
-		/* ack timer interrupt and try to set next interrupt */
-		avr32_timer_ack();
-
-		/*
-		 * Call the generic timer interrupt handler
-		 */
-		write_seqlock(&xtime_lock);
-		do_timer(1);
-		write_sequnlock(&xtime_lock);
-
-		/*
-		 * In UP mode, we call local_timer_interrupt() to do profiling
-		 * and process accounting.
-		 *
-		 * SMP is not supported yet.
-		 */
-		local_timer_interrupt(irq, dev_id);
-
-		return IRQ_HANDLED;
-	}
-
-	return IRQ_NONE;
-}

arch/avr32/mm/init.c

@@ -34,9 +34,6 @@ struct page *empty_zero_page;
  */
 unsigned long mmu_context_cache = NO_CONTEXT;
 
-#define START_PFN	(NODE_DATA(0)->bdata->node_boot_start >> PAGE_SHIFT)
-#define MAX_LOW_PFN	(NODE_DATA(0)->bdata->node_low_pfn)
-
 void show_mem(void)
 {
 	int total = 0, reserved = 0, cached = 0;

arch/avr32/oprofile/op_model_avr32.c

@@ -16,7 +16,6 @@
 #include <linux/sched.h>
 #include <linux/types.h>
 
-#include <asm/intc.h>
 #include <asm/sysreg.h>
 #include <asm/system.h>
 

drivers/char/Kconfig

@@ -706,7 +706,7 @@ config NVRAM
 
 config RTC
 	tristate "Enhanced Real Time Clock Support"
-	depends on !PPC && !PARISC && !IA64 && !M68K && !SPARC && !FRV && !ARM && !SUPERH && !S390
+	depends on !PPC && !PARISC && !IA64 && !M68K && !SPARC && !FRV && !ARM && !SUPERH && !S390 && !AVR32
 	---help---
 	  If you say Y here and create a character special file /dev/rtc with
 	  major number 10 and minor number 135 using mknod ("man mknod"), you
@@ -776,7 +776,7 @@ config SGI_IP27_RTC
 
 config GEN_RTC
 	tristate "Generic /dev/rtc emulation"
-	depends on RTC!=y && !IA64 && !ARM && !M32R && !MIPS && !SPARC && !FRV && !S390 && !SUPERH
+	depends on RTC!=y && !IA64 && !ARM && !M32R && !MIPS && !SPARC && !FRV && !S390 && !SUPERH && !AVR32
 	---help---
 	  If you say Y here and create a character special file /dev/rtc with
 	  major number 10 and minor number 135 using mknod ("man mknod"), you

drivers/char/keyboard.c

@@ -1033,7 +1033,8 @@ DECLARE_TASKLET_DISABLED(keyboard_tasklet, kbd_bh, 0);
 #if defined(CONFIG_X86) || defined(CONFIG_IA64) || defined(CONFIG_ALPHA) ||\
     defined(CONFIG_MIPS) || defined(CONFIG_PPC) || defined(CONFIG_SPARC) ||\
     defined(CONFIG_PARISC) || defined(CONFIG_SUPERH) ||\
-    (defined(CONFIG_ARM) && defined(CONFIG_KEYBOARD_ATKBD) && !defined(CONFIG_ARCH_RPC))
+    (defined(CONFIG_ARM) && defined(CONFIG_KEYBOARD_ATKBD) && !defined(CONFIG_ARCH_RPC)) ||\
+    defined(CONFIG_AVR32)
 
 #define HW_RAW(dev) (test_bit(EV_MSC, dev->evbit) && test_bit(MSC_RAW, dev->mscbit) &&\
 			((dev)->id.bustype == BUS_I8042) && ((dev)->id.vendor == 0x0001) && ((dev)->id.product == 0x0001))

drivers/clocksource/Makefile

+obj-$(CONFIG_ATMEL_TCB_CLKSRC)	+= tcb_clksrc.o
 obj-$(CONFIG_X86_CYCLONE_TIMER)	+= cyclone.o
 obj-$(CONFIG_X86_PM_TIMER)	+= acpi_pm.o
 obj-$(CONFIG_SCx200HR_TIMER)	+= scx200_hrt.o

drivers/clocksource/tcb_clksrc.c

+#include <linux/init.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/atmel_tc.h>
+
+
+/*
+ * We're configured to use a specific TC block, one that's not hooked
+ * up to external hardware, to provide a time solution:
+ *
+ *   - Two channels combine to create a free-running 32 bit counter
+ *     with a base rate of 5+ MHz, packaged as a clocksource (with
+ *     resolution better than 200 nsec).
+ *
+ *   - The third channel may be used to provide a 16-bit clockevent
+ *     source, used in either periodic or oneshot mode.  This runs
+ *     at 32 KiHZ, and can handle delays of up to two seconds.
+ *
+ * A boot clocksource and clockevent source are also currently needed,
+ * unless the relevant platforms (ARM/AT91, AVR32/AT32) are changed so
+ * this code can be used when init_timers() is called, well before most
+ * devices are set up.  (Some low end AT91 parts, which can run uClinux,
+ * have only the timers in one TC block... they currently don't support
+ * the tclib code, because of that initialization issue.)
+ *
+ * REVISIT behavior during system suspend states... we should disable
+ * all clocks and save the power.  Easily done for clockevent devices,
+ * but clocksources won't necessarily get the needed notifications.
+ * For deeper system sleep states, this will be mandatory...
+ */
+
+static void __iomem *tcaddr;
+
+static cycle_t tc_get_cycles(void)
+{
+	unsigned long	flags;
+	u32		lower, upper;
+
+	raw_local_irq_save(flags);
+	do {
+		upper = __raw_readl(tcaddr + ATMEL_TC_REG(1, CV));
+		lower = __raw_readl(tcaddr + ATMEL_TC_REG(0, CV));
+	} while (upper != __raw_readl(tcaddr + ATMEL_TC_REG(1, CV)));
+
+	raw_local_irq_restore(flags);
+	return (upper << 16) | lower;
+}
+
+static struct clocksource clksrc = {
+	.name           = "tcb_clksrc",
+	.rating         = 200,
+	.read           = tc_get_cycles,
+	.mask           = CLOCKSOURCE_MASK(32),
+	.shift          = 18,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+#ifdef CONFIG_GENERIC_CLOCKEVENTS
+
+struct tc_clkevt_device {
+	struct clock_event_device	clkevt;
+	struct clk			*clk;
+	void __iomem			*regs;
+};
+
+static struct tc_clkevt_device *to_tc_clkevt(struct clock_event_device *clkevt)
+{
+	return container_of(clkevt, struct tc_clkevt_device, clkevt);
+}
+
+/* For now, we always use the 32K clock ... this optimizes for NO_HZ,
+ * because using one of the divided clocks would usually mean the
+ * tick rate can never be less than several dozen Hz (vs 0.5 Hz).
+ *
+ * A divided clock could be good for high resolution timers, since
+ * 30.5 usec resolution can seem "low".
+ */
+static u32 timer_clock;
+
+static void tc_mode(enum clock_event_mode m, struct clock_event_device *d)
+{
+	struct tc_clkevt_device *tcd = to_tc_clkevt(d);
+	void __iomem		*regs = tcd->regs;
+
+	if (tcd->clkevt.mode == CLOCK_EVT_MODE_PERIODIC
+			|| tcd->clkevt.mode == CLOCK_EVT_MODE_ONESHOT) {
+		__raw_writel(0xff, regs + ATMEL_TC_REG(2, IDR));
+		__raw_writel(ATMEL_TC_CLKDIS, regs + ATMEL_TC_REG(2, CCR));
+		clk_disable(tcd->clk);
+	}
+
+	switch (m) {
+
+	/* By not making the gentime core emulate periodic mode on top
+	 * of oneshot, we get lower overhead and improved accuracy.
+	 */
+	case CLOCK_EVT_MODE_PERIODIC:
+		clk_enable(tcd->clk);
+
+		/* slow clock, count up to RC, then irq and restart */
+		__raw_writel(timer_clock
+				| ATMEL_TC_WAVE | ATMEL_TC_WAVESEL_UP_AUTO,
+				regs + ATMEL_TC_REG(2, CMR));
+		__raw_writel((32768 + HZ/2) / HZ, tcaddr + ATMEL_TC_REG(2, RC));
+
+		/* Enable clock and interrupts on RC compare */
+		__raw_writel(ATMEL_TC_CPCS, regs + ATMEL_TC_REG(2, IER));
+
+		/* go go gadget! */
+		__raw_writel(ATMEL_TC_CLKEN | ATMEL_TC_SWTRG,
+				regs + ATMEL_TC_REG(2, CCR));
+		break;
+
+	case CLOCK_EVT_MODE_ONESHOT:
+		clk_enable(tcd->clk);
+
+		/* slow clock, count up to RC, then irq and stop */
+		__raw_writel(timer_clock | ATMEL_TC_CPCSTOP
+				| ATMEL_TC_WAVE | ATMEL_TC_WAVESEL_UP_AUTO,
+				regs + ATMEL_TC_REG(2, CMR));
+		__raw_writel(ATMEL_TC_CPCS, regs + ATMEL_TC_REG(2, IER));
+
+		/* set_next_event() configures and starts the timer */
+		break;
+
+	default:
+		break;
+	}
+}
+
+static int tc_next_event(unsigned long delta, struct clock_event_device *d)
+{
+	__raw_writel(delta, tcaddr + ATMEL_TC_REG(2, RC));
+
+	/* go go gadget! */
+	__raw_writel(ATMEL_TC_CLKEN | ATMEL_TC_SWTRG,
+			tcaddr + ATMEL_TC_REG(2, CCR));
+	return 0;
+}
+
+static struct tc_clkevt_device clkevt = {
+	.clkevt	= {
+		.name		= "tc_clkevt",
+		.features	= CLOCK_EVT_FEAT_PERIODIC
+					| CLOCK_EVT_FEAT_ONESHOT,
+		.shift		= 32,
+		/* Should be lower than at91rm9200's system timer */
+		.rating		= 125,
+		.cpumask	= CPU_MASK_CPU0,
+		.set_next_event	= tc_next_event,
+		.set_mode	= tc_mode,
+	},
+};
+
+static irqreturn_t ch2_irq(int irq, void *handle)
+{
+	struct tc_clkevt_device	*dev = handle;
+	unsigned int		sr;
+
+	sr = __raw_readl(dev->regs + ATMEL_TC_REG(2, SR));
+	if (sr & ATMEL_TC_CPCS) {
+		dev->clkevt.event_handler(&dev->clkevt);
+		return IRQ_HANDLED;
+	}
+
+	return IRQ_NONE;
+}
+
+static struct irqaction tc_irqaction = {
+	.name		= "tc_clkevt",
+	.flags		= IRQF_TIMER | IRQF_DISABLED,
+	.handler	= ch2_irq,
+};
+
+static void __init setup_clkevents(struct atmel_tc *tc, int clk32k_divisor_idx)
+{
+	struct clk *t2_clk = tc->clk[2];
+	int irq = tc->irq[2];
+
+	clkevt.regs = tc->regs;
+	clkevt.clk = t2_clk;
+	tc_irqaction.dev_id = &clkevt;
+
+	timer_clock = clk32k_divisor_idx;
+
+	clkevt.clkevt.mult = div_sc(32768, NSEC_PER_SEC, clkevt.clkevt.shift);
+	clkevt.clkevt.max_delta_ns
+		= clockevent_delta2ns(0xffff, &clkevt.clkevt);
+	clkevt.clkevt.min_delta_ns = clockevent_delta2ns(1, &clkevt.clkevt) + 1;
+
+	setup_irq(irq, &tc_irqaction);
+
+	clockevents_register_device(&clkevt.clkevt);
+}
+
+#else /* !CONFIG_GENERIC_CLOCKEVENTS */
+
+static void __init setup_clkevents(struct atmel_tc *tc, int clk32k_divisor_idx)
+{
+	/* NOTHING */
+}
+
+#endif
+
+static int __init tcb_clksrc_init(void)
+{
+	static char bootinfo[] __initdata
+		= KERN_DEBUG "%s: tc%d at %d.%03d MHz\n";
+
+	struct platform_device *pdev;
+	struct atmel_tc *tc;
+	struct clk *t0_clk;
+	u32 rate, divided_rate = 0;
+	int best_divisor_idx = -1;
+	int clk32k_divisor_idx = -1;
+	int i;
+
+	tc = atmel_tc_alloc(CONFIG_ATMEL_TCB_CLKSRC_BLOCK, clksrc.name);
+	if (!tc) {
+		pr_debug("can't alloc TC for clocksource\n");
+		return -ENODEV;
+	}
+	tcaddr = tc->regs;
+	pdev = tc->pdev;
+
+	t0_clk = tc->clk[0];
+	clk_enable(t0_clk);
+
+	/* How fast will we be counting?  Pick something over 5 MHz.  */
+	rate = (u32) clk_get_rate(t0_clk);
+	for (i = 0; i < 5; i++) {
+		unsigned divisor = atmel_tc_divisors[i];
+		unsigned tmp;
+
+		/* remember 32 KiHz clock for later */
+		if (!divisor) {
+			clk32k_divisor_idx = i;
+			continue;
+		}
+
+		tmp = rate / divisor;
+		pr_debug("TC: %u / %-3u [%d] --> %u\n", rate, divisor, i, tmp);
+		if (best_divisor_idx > 0) {
+			if (tmp < 5 * 1000 * 1000)
+				continue;
+		}
+		divided_rate = tmp;
+		best_divisor_idx = i;
+	}
+
+	clksrc.mult = clocksource_hz2mult(divided_rate, clksrc.shift);
+
+	printk(bootinfo, clksrc.name, CONFIG_ATMEL_TCB_CLKSRC_BLOCK,
+			divided_rate / 1000000,
+			((divided_rate + 500000) % 1000000) / 1000);
+
+	/* tclib will give us three clocks no matter what the
+	 * underlying platform supports.
+	 */
+	clk_enable(tc->clk[1]);
+
+	/* channel 0:  waveform mode, input mclk/8, clock TIOA0 on overflow */
+	__raw_writel(best_divisor_idx			/* likely divide-by-8 */
+			| ATMEL_TC_WAVE
+			| ATMEL_TC_WAVESEL_UP		/* free-run */
+			| ATMEL_TC_ACPA_SET		/* TIOA0 rises at 0 */
+			| ATMEL_TC_ACPC_CLEAR,		/* (duty cycle 50%) */
+			tcaddr + ATMEL_TC_REG(0, CMR));
+	__raw_writel(0x0000, tcaddr + ATMEL_TC_REG(0, RA));
+	__raw_writel(0x8000, tcaddr + ATMEL_TC_REG(0, RC));
+	__raw_writel(0xff, tcaddr + ATMEL_TC_REG(0, IDR));	/* no irqs */
+	__raw_writel(ATMEL_TC_CLKEN, tcaddr + ATMEL_TC_REG(0, CCR));
+
+	/* channel 1:  waveform mode, input TIOA0 */
+	__raw_writel(ATMEL_TC_XC1			/* input: TIOA0 */
+			| ATMEL_TC_WAVE
+			| ATMEL_TC_WAVESEL_UP,		/* free-run */
+			tcaddr + ATMEL_TC_REG(1, CMR));
+	__raw_writel(0xff, tcaddr + ATMEL_TC_REG(1, IDR));	/* no irqs */
+	__raw_writel(ATMEL_TC_CLKEN, tcaddr + ATMEL_TC_REG(1, CCR));
+
+	/* chain channel 0 to channel 1, then reset all the timers */
+	__raw_writel(ATMEL_TC_TC1XC1S_TIOA0, tcaddr + ATMEL_TC_BMR);
+	__raw_writel(ATMEL_TC_SYNC, tcaddr + ATMEL_TC_BCR);
+
+	/* and away we go! */
+	clocksource_register(&clksrc);
+
+	/* channel 2:  periodic and oneshot timer support */
+	setup_clkevents(tc, clk32k_divisor_idx);
+
+	return 0;
+}
+arch_initcall(tcb_clksrc_init);

drivers/misc/Kconfig

@@ -22,6 +22,39 @@ config ATMEL_PWM
 	  purposes including software controlled power-efficent backlights
 	  on LCD displays, motor control, and waveform generation.
 
+config ATMEL_TCLIB
+	bool "Atmel AT32/AT91 Timer/Counter Library"
+	depends on (AVR32 || ARCH_AT91)
+	help
+	  Select this if you want a library to allocate the Timer/Counter
+	  blocks found on many Atmel processors.  This facilitates using
+	  these blocks by different drivers despite processor differences.
+
+config ATMEL_TCB_CLKSRC
+	bool "TC Block Clocksource"
+	depends on ATMEL_TCLIB && GENERIC_TIME
+	default y
+	help
+	  Select this to get a high precision clocksource based on a
+	  TC block with a 5+ MHz base clock rate.  Two timer channels
+	  are combined to make a single 32-bit timer.
+
+	  When GENERIC_CLOCKEVENTS is defined, the third timer channel
+	  may be used as a clock event device supporting oneshot mode
+	  (delays of up to two seconds) based on the 32 KiHz clock.
+
+config ATMEL_TCB_CLKSRC_BLOCK
+	int
+	depends on ATMEL_TCB_CLKSRC
+	prompt "TC Block" if ARCH_AT91RM9200 || ARCH_AT91SAM9260 || CPU_AT32AP700X
+	default 0
+	range 0 1
+	help
+	  Some chips provide more than one TC block, so you have the
+	  choice of which one to use for the clock framework.  The other
+	  TC can be used for other purposes, such as PWM generation and
+	  interval timing.
+
 config IBM_ASM
 	tristate "Device driver for IBM RSA service processor"
 	depends on X86 && PCI && INPUT && EXPERIMENTAL

drivers/misc/Makefile

@@ -10,6 +10,7 @@ obj-$(CONFIG_ACER_WMI)     += acer-wmi.o
 obj-$(CONFIG_ASUS_LAPTOP)     += asus-laptop.o
 obj-$(CONFIG_ATMEL_PWM)		+= atmel_pwm.o
 obj-$(CONFIG_ATMEL_SSC)		+= atmel-ssc.o
+obj-$(CONFIG_ATMEL_TCLIB)	+= atmel_tclib.o
 obj-$(CONFIG_TC1100_WMI)	+= tc1100-wmi.o
 obj-$(CONFIG_LKDTM)		+= lkdtm.o
 obj-$(CONFIG_TIFM_CORE)       	+= tifm_core.o

drivers/misc/atmel_tclib.c

+#include <linux/atmel_tc.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+/* Number of bytes to reserve for the iomem resource */
+#define ATMEL_TC_IOMEM_SIZE	256
+
+
+/*
+ * This is a thin library to solve the problem of how to portably allocate
+ * one of the TC blocks.  For simplicity, it doesn't currently expect to
+ * share individual timers between different drivers.
+ */
+
+#if defined(CONFIG_AVR32)
+/* AVR32 has these divide PBB */
+const u8 atmel_tc_divisors[5] = { 0, 4, 8, 16, 32, };
+EXPORT_SYMBOL(atmel_tc_divisors);
+
+#elif defined(CONFIG_ARCH_AT91)
+/* AT91 has these divide MCK */
+const u8 atmel_tc_divisors[5] = { 2, 8, 32, 128, 0, };
+EXPORT_SYMBOL(atmel_tc_divisors);
+
+#endif
+
+static DEFINE_SPINLOCK(tc_list_lock);
+static LIST_HEAD(tc_list);
+
+/**
+ * atmel_tc_alloc - allocate a specified TC block
+ * @block: which block to allocate
+ * @name: name to be associated with the iomem resource
+ *
+ * Caller allocates a block.  If it is available, a pointer to a
+ * pre-initialized struct atmel_tc is returned. The caller can access
+ * the registers directly through the "regs" field.
+ */
+struct atmel_tc *atmel_tc_alloc(unsigned block, const char *name)
+{
+	struct atmel_tc		*tc;
+	struct platform_device	*pdev = NULL;
+	struct resource		*r;
+
+	spin_lock(&tc_list_lock);
+	list_for_each_entry(tc, &tc_list, node) {
+		if (tc->pdev->id == block) {
+			pdev = tc->pdev;
+			break;
+		}
+	}
+
+	if (!pdev || tc->iomem)
+		goto fail;
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	r = request_mem_region(r->start, ATMEL_TC_IOMEM_SIZE, name);
+	if (!r)
+		goto fail;
+
+	tc->regs = ioremap(r->start, ATMEL_TC_IOMEM_SIZE);
+	if (!tc->regs)
+		goto fail_ioremap;
+
+	tc->iomem = r;
+
+out:
+	spin_unlock(&tc_list_lock);
+	return tc;
+
+fail_ioremap:
+	release_resource(r);
+fail:
+	tc = NULL;
+	goto out;
+}
+EXPORT_SYMBOL_GPL(atmel_tc_alloc);
+
+/**
+ * atmel_tc_free - release a specified TC block
+ * @tc: Timer/counter block that was returned by atmel_tc_alloc()
+ *
+ * This reverses the effect of atmel_tc_alloc(), unmapping the I/O
+ * registers, invalidating the resource returned by that routine and
+ * making the TC available to other drivers.
+ */
+void atmel_tc_free(struct atmel_tc *tc)
+{
+	spin_lock(&tc_list_lock);
+	if (tc->regs) {
+		iounmap(tc->regs);
+		release_resource(tc->iomem);
+		tc->regs = NULL;
+		tc->iomem = NULL;
+	}
+	spin_unlock(&tc_list_lock);
+}
+EXPORT_SYMBOL_GPL(atmel_tc_free);
+
+static int __init tc_probe(struct platform_device *pdev)
+{
+	struct atmel_tc *tc;
+	struct clk	*clk;
+	int		irq;
+
+	if (!platform_get_resource(pdev, IORESOURCE_MEM, 0))
+		return -EINVAL;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return -EINVAL;
+
+	tc = kzalloc(sizeof(struct atmel_tc), GFP_KERNEL);
+	if (!tc)
+		return -ENOMEM;
+
+	tc->pdev = pdev;
+
+	clk = clk_get(&pdev->dev, "t0_clk");
+	if (IS_ERR(clk)) {
+		kfree(tc);
+		return -EINVAL;
+	}
+
+	tc->clk[0] = clk;
+	tc->clk[1] = clk_get(&pdev->dev, "t1_clk");
+	if (IS_ERR(tc->clk[1]))
+		tc->clk[1] = clk;
+	tc->clk[2] = clk_get(&pdev->dev, "t2_clk");
+	if (IS_ERR(tc->clk[2]))
+		tc->clk[2] = clk;
+
+	tc->irq[0] = irq;
+	tc->irq[1] = platform_get_irq(pdev, 1);
+	if (tc->irq[1] < 0)
+		tc->irq[1] = irq;
+	tc->irq[2] = platform_get_irq(pdev, 2);
+	if (tc->irq[2] < 0)
+		tc->irq[2] = irq;
+
+	spin_lock(&tc_list_lock);
+	list_add_tail(&tc->node, &tc_list);
+	spin_unlock(&tc_list_lock);
+
+	return 0;
+}
+
+static struct platform_driver tc_driver = {
+	.driver.name	= "atmel_tcb",
+};
+
+static int __init tc_init(void)
+{
+	return platform_driver_probe(&tc_driver, tc_probe);
+}
+arch_initcall(tc_init);

drivers/parport/Kconfig

@@ -36,7 +36,7 @@ if PARPORT
 config PARPORT_PC
 	tristate "PC-style hardware"
 	depends on (!SPARC64 || PCI) && !SPARC32 && !M32R && !FRV && \
-		(!M68K || ISA) && !MN10300
+		(!M68K || ISA) && !MN10300 && !AVR32
 	---help---
 	  You should say Y here if you have a PC-style parallel port. All
 	  IBM PC compatible computers and some Alphas have PC-style

drivers/usb/gadget/Kconfig

@@ -118,10 +118,10 @@ config USB_AMD5536UDC
 config USB_GADGET_ATMEL_USBA
 	boolean "Atmel USBA"
 	select USB_GADGET_DUALSPEED
-	depends on AVR32
+	depends on AVR32 || ARCH_AT91CAP9
 	help
 	  USBA is the integrated high-speed USB Device controller on
-	  the AT32AP700x processors from Atmel.
+	  the AT32AP700x and AT91CAP9 processors from Atmel.
 
 config USB_ATMEL_USBA
 	tristate

drivers/usb/gadget/atmel_usba_udc.h

@@ -41,6 +41,15 @@
 #define USBA_EN_USBA				(1 <<  8)
 #define USBA_DETACH				(1 <<  9)
 #define USBA_REMOTE_WAKE_UP			(1 << 10)
+#define USBA_PULLD_DIS				(1 << 11)
+
+#if defined(CONFIG_AVR32)
+#define USBA_ENABLE_MASK			USBA_EN_USBA
+#define USBA_DISABLE_MASK			0
+#elif defined(CONFIG_ARCH_AT91)
+#define USBA_ENABLE_MASK			(USBA_EN_USBA | USBA_PULLD_DIS)
+#define USBA_DISABLE_MASK			USBA_DETACH
+#endif /* CONFIG_ARCH_AT91 */
 
 /* Bitfields in FNUM */
 #define USBA_MICRO_FRAME_NUM_OFFSET		0

include/asm-avr32/arch-at32ap/board.h

@@ -38,9 +38,7 @@ struct platform_device *
 at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
 		     unsigned long fbmem_start, unsigned long fbmem_len);
 
-struct usba_platform_data {
-	int vbus_pin;
-};
+struct usba_platform_data;
 struct platform_device *
 at32_add_device_usba(unsigned int id, struct usba_platform_data *data);
 
@@ -68,7 +66,10 @@ struct platform_device *at32_add_device_pwm(u32 mask);
 struct platform_device *
 at32_add_device_ssc(unsigned int id, unsigned int flags);
 
-struct platform_device *at32_add_device_twi(unsigned int id);
+struct i2c_board_info;
+struct platform_device *at32_add_device_twi(unsigned int id,
+					    struct i2c_board_info *b,
+					    unsigned int n);
 struct platform_device *at32_add_device_mci(unsigned int id);
 struct platform_device *at32_add_device_ac97c(unsigned int id);
 struct platform_device *at32_add_device_abdac(unsigned int id);

include/asm-avr32/arch-at32ap/pm.h

+/*
+ * AVR32 AP Power Management.
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_ARCH_PM_H
+#define __ASM_AVR32_ARCH_PM_H
+
+/* Possible arguments to the "sleep" instruction */
+#define CPU_SLEEP_IDLE		0
+#define CPU_SLEEP_FROZEN	1
+#define CPU_SLEEP_STANDBY	2
+#define CPU_SLEEP_STOP		3
+#define CPU_SLEEP_STATIC	5
+
+#ifndef __ASSEMBLY__
+extern void cpu_enter_idle(void);
+
+extern bool disable_idle_sleep;
+
+static inline void cpu_disable_idle_sleep(void)
+{
+	disable_idle_sleep = true;
+}
+
+static inline void cpu_enable_idle_sleep(void)
+{
+	disable_idle_sleep = false;
+}
+
+static inline void cpu_idle_sleep(void)
+{
+	/*
+	 * If we're using the COUNT and COMPARE registers for
+	 * timekeeping, we can't use the IDLE state.
+	 */
+	if (disable_idle_sleep)
+		cpu_relax();
+	else
+		cpu_enter_idle();
+}
+#endif
+
+#endif /* __ASM_AVR32_ARCH_PM_H */

include/asm-avr32/arch-at32ap/time.h

-/*
- * Copyright (C) 2007 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_AVR32_ARCH_AT32AP_TIME_H
-#define _ASM_AVR32_ARCH_AT32AP_TIME_H
-
-#include <linux/platform_device.h>
-
-extern struct irqaction timer_irqaction;
-extern struct platform_device at32_systc0_device;
-extern void local_timer_interrupt(int irq, void *dev_id);
-
-#define TIMER_BCR					0x000000c0
-#define TIMER_BCR_SYNC						 0
-#define TIMER_BMR					0x000000c4
-#define TIMER_BMR_TC0XC0S					 0
-#define TIMER_BMR_TC1XC1S					 2
-#define TIMER_BMR_TC2XC2S					 4
-#define TIMER_CCR					0x00000000
-#define TIMER_CCR_CLKDIS					 1
-#define TIMER_CCR_CLKEN						 0
-#define TIMER_CCR_SWTRG						 2
-#define TIMER_CMR					0x00000004
-#define TIMER_CMR_ABETRG					10
-#define TIMER_CMR_ACPA						16
-#define TIMER_CMR_ACPC						18
-#define TIMER_CMR_AEEVT						20
-#define TIMER_CMR_ASWTRG					22
-#define TIMER_CMR_BCPB						24
-#define TIMER_CMR_BCPC						26
-#define TIMER_CMR_BEEVT						28
-#define TIMER_CMR_BSWTRG					30
-#define TIMER_CMR_BURST						 4
-#define TIMER_CMR_CLKI						 3
-#define TIMER_CMR_CPCDIS					 7
-#define TIMER_CMR_CPCSTOP					 6
-#define TIMER_CMR_CPCTRG					14
-#define TIMER_CMR_EEVT						10
-#define TIMER_CMR_EEVTEDG					 8
-#define TIMER_CMR_ENETRG					12
-#define TIMER_CMR_ETRGEDG					 8
-#define TIMER_CMR_LDBDIS					 7
-#define TIMER_CMR_LDBSTOP					 6
-#define TIMER_CMR_LDRA						16
-#define TIMER_CMR_LDRB						18
-#define TIMER_CMR_TCCLKS					 0
-#define TIMER_CMR_WAVE						15
-#define TIMER_CMR_WAVSEL					13
-#define TIMER_CV					0x00000010
-#define TIMER_CV_CV						 0
-#define TIMER_IDR					0x00000028
-#define TIMER_IDR_COVFS						 0
-#define TIMER_IDR_CPAS						 2
-#define TIMER_IDR_CPBS						 3
-#define TIMER_IDR_CPCS						 4
-#define TIMER_IDR_ETRGS						 7
-#define TIMER_IDR_LDRAS						 5
-#define TIMER_IDR_LDRBS						 6
-#define TIMER_IDR_LOVRS						 1
-#define TIMER_IER					0x00000024
-#define TIMER_IER_COVFS						 0
-#define TIMER_IER_CPAS						 2
-#define TIMER_IER_CPBS						 3
-#define TIMER_IER_CPCS						 4
-#define TIMER_IER_ETRGS						 7
-#define TIMER_IER_LDRAS						 5
-#define TIMER_IER_LDRBS						 6
-#define TIMER_IER_LOVRS						 1
-#define TIMER_IMR					0x0000002c
-#define TIMER_IMR_COVFS						 0
-#define TIMER_IMR_CPAS						 2
-#define TIMER_IMR_CPBS						 3
-#define TIMER_IMR_CPCS						 4
-#define TIMER_IMR_ETRGS						 7
-#define TIMER_IMR_LDRAS						 5
-#define TIMER_IMR_LDRBS						 6
-#define TIMER_IMR_LOVRS						 1
-#define TIMER_RA					0x00000014
-#define TIMER_RA_RA						 0
-#define TIMER_RB					0x00000018
-#define TIMER_RB_RB						 0
-#define TIMER_RC					0x0000001c
-#define TIMER_RC_RC						 0
-#define TIMER_SR					0x00000020
-#define TIMER_SR_CLKSTA						16
-#define TIMER_SR_COVFS						 0
-#define TIMER_SR_CPAS						 2
-#define TIMER_SR_CPBS						 3
-#define TIMER_SR_CPCS						 4
-#define TIMER_SR_ETRGS						 7
-#define TIMER_SR_LDRAS						 5
-#define TIMER_SR_LDRBS						 6
-#define TIMER_SR_LOVRS						 1
-#define TIMER_SR_MTIOA						17
-#define TIMER_SR_MTIOB						18
-
-/* Bit manipulation macros */
-#define TIMER_BIT(name)		(1 << TIMER_##name)
-#define TIMER_BF(name,value)	((value) << TIMER_##name)
-
-/* Register access macros */
-#define timer_read(port,instance,reg) \
-	__raw_readl(port + (0x40 * instance) + TIMER_##reg)
-#define timer_write(port,instance,reg,value) \
-	__raw_writel((value), port + (0x40 * instance) + TIMER_##reg)
-
-#endif /* _ASM_AVR32_ARCH_AT32AP_TIME_H */

include/asm-avr32/asm.h

@@ -12,10 +12,10 @@
 #include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
 
-#define mask_interrupts		ssrf	SR_GM_BIT
-#define mask_exceptions		ssrf	SR_EM_BIT
-#define unmask_interrupts	csrf	SR_GM_BIT
-#define unmask_exceptions	csrf	SR_EM_BIT
+#define mask_interrupts		ssrf	SYSREG_GM_OFFSET
+#define mask_exceptions		ssrf	SYSREG_EM_OFFSET
+#define unmask_interrupts	csrf	SYSREG_GM_OFFSET
+#define unmask_exceptions	csrf	SYSREG_EM_OFFSET
 
 #ifdef CONFIG_FRAME_POINTER
 	.macro	save_fp

include/asm-avr32/intc.h

-#ifndef __ASM_AVR32_INTC_H
-#define __ASM_AVR32_INTC_H
-
-#include <linux/sysdev.h>
-#include <linux/interrupt.h>
-
-struct irq_controller;
-struct irqaction;
-struct pt_regs;
-
-struct platform_device;
-
-/* Information about the internal interrupt controller */
-struct intc_device {
-	/* ioremapped address of configuration block */
-	void __iomem *regs;
-
-	/* the physical device */
-	struct platform_device *pdev;
-
-	/* Number of interrupt lines per group. */
-	unsigned int irqs_per_group;
-
-	/* The highest group ID + 1 */
-	unsigned int nr_groups;
-
-	/*
-	 * Bitfield indicating which groups are actually in use.  The
-	 * size of the array is
-	 * ceil(group_max / (8 * sizeof(unsigned int))).
-	 */
-	unsigned int group_mask[];
-};
-
-struct irq_controller_class {
-	/*
-	 * A short name identifying this kind of controller.
-	 */
-	const char *typename;
-	/*
-	 * Handle the IRQ.  Must do any necessary acking and masking.
-	 */
-	irqreturn_t (*handle)(int irq, void *dev_id, struct pt_regs *regs);
-	/*
-	 * Register a new IRQ handler.
-	 */
-	int (*setup)(struct irq_controller *ctrl, unsigned int irq,
-		     struct irqaction *action);
-	/*
-	 * Unregister a IRQ handler.
-	 */
-	void (*free)(struct irq_controller *ctrl, unsigned int irq,
-		     void *dev_id);
-	/*
-	 * Mask the IRQ in the interrupt controller.
-	 */
-	void (*mask)(struct irq_controller *ctrl, unsigned int irq);
-	/*
-	 * Unmask the IRQ in the interrupt controller.
-	 */
-	void (*unmask)(struct irq_controller *ctrl, unsigned int irq);
-	/*
-	 * Set the type of the IRQ. See below for possible types.
-	 * Return -EINVAL if a given type is not supported
-	 */
-	int (*set_type)(struct irq_controller *ctrl, unsigned int irq,
-			unsigned int type);
-	/*
-	 * Return the IRQ type currently set
-	 */
-	unsigned int (*get_type)(struct irq_controller *ctrl, unsigned int irq);
-};
-
-struct irq_controller {
-	struct irq_controller_class *class;
-	unsigned int irq_group;
-	unsigned int first_irq;
-	unsigned int nr_irqs;
-	struct list_head list;
-};
-
-struct intc_group_desc {
-	struct irq_controller *ctrl;
-	irqreturn_t (*handle)(int, void *, struct pt_regs *);
-	unsigned long flags;
-	void *dev_id;
-	const char *devname;
-};
-
-/*
- * The internal interrupt controller.  Defined in board/part-specific
- * devices.c.
- * TODO: Should probably be defined per-cpu.
- */
-extern struct intc_device intc;
-
-extern int request_internal_irq(unsigned int irq,
-				irqreturn_t (*handler)(int, void *, struct pt_regs *),
-				unsigned long irqflags,
-				const char *devname, void *dev_id);
-extern void free_internal_irq(unsigned int irq);
-
-/* Only used by time_init() */
-extern int setup_internal_irq(unsigned int irq, struct intc_group_desc *desc);
-
-/*
- * Set interrupt priority for a given group. `group' can be found by
- * using irq_to_group(irq). Priority can be from 0 (lowest) to 3
- * (highest). Higher-priority interrupts will preempt lower-priority
- * interrupts (unless interrupts are masked globally).
- *
- * This function does not check for conflicts within a group.
- */
-extern int intc_set_priority(unsigned int group,
-			     unsigned int priority);
-
-/*
- * Returns a bitmask of pending interrupts in a group.
- */
-extern unsigned long intc_get_pending(unsigned int group);
-
-/*
- * Register a new external interrupt controller.  Returns the first
- * external IRQ number that is assigned to the new controller.
- */
-extern int intc_register_controller(struct irq_controller *ctrl);
-
-#endif /* __ASM_AVR32_INTC_H */

include/asm-avr32/irq.h

@@ -14,6 +14,11 @@
 #ifndef __ASSEMBLER__
 int nmi_enable(void);
 void nmi_disable(void);
+
+/*
+ * Returns a bitmask of pending interrupts in a group.
+ */
+extern unsigned long intc_get_pending(unsigned int group);
 #endif
 
 #endif /* __ASM_AVR32_IOCTLS_H */

include/asm-avr32/page.h

@@ -8,13 +8,11 @@
 #ifndef __ASM_AVR32_PAGE_H
 #define __ASM_AVR32_PAGE_H
 
+#include <linux/const.h>
+
 /* PAGE_SHIFT determines the page size */
 #define PAGE_SHIFT	12
-#ifdef __ASSEMBLY__
-#define PAGE_SIZE	(1 << PAGE_SHIFT)
-#else
-#define PAGE_SIZE	(1UL << PAGE_SHIFT)
-#endif
+#define PAGE_SIZE	(_AC(1, UL) << PAGE_SHIFT)
 #define PAGE_MASK	(~(PAGE_SIZE-1))
 #define PTE_MASK	PAGE_MASK
 

include/asm-avr32/serial.h

+#ifndef _ASM_SERIAL_H
+#define _ASM_SERIAL_H
+
+/*
+ * This assumes you have a 1.8432 MHz clock for your UART.
+ *
+ * It'd be nice if someone built a serial card with a 24.576 MHz
+ * clock, since the 16550A is capable of handling a top speed of 1.5
+ * megabits/second; but this requires the faster clock.
+ */
+#define BASE_BAUD (1843200 / 16)
+
+#endif /* _ASM_SERIAL_H */

include/asm-avr32/xor.h

+#ifndef _ASM_XOR_H
+#define _ASM_XOR_H
+
+#include <asm-generic/xor.h>
+
+#endif

include/linux/usb/atmel_usba_udc.h

+/*
+ * Platform data definitions for Atmel USBA gadget driver.
+ */
+#ifndef __LINUX_USB_USBA_H
+#define __LINUX_USB_USBA_H
+
+struct usba_ep_data {
+	char	*name;
+	int	index;
+	int	fifo_size;
+	int	nr_banks;
+	int	can_dma;
+	int	can_isoc;
+};
+
+struct usba_platform_data {
+	int			vbus_pin;
+	int			num_ep;
+	struct usba_ep_data	ep[0];
+};
+
+#endif /* __LINUX_USB_USBA_H */