Merge branches 'devel-cleanup', 'devel-omap4', 'devel-board' and 'devel-nand' into omap-for-linus

arch/arm/configs/omap2plus_defconfig

@@ -58,6 +58,7 @@ CONFIG_ARM_ERRATA_411920=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_SMP=y
+CONFIG_NR_CPUS=2
 # CONFIG_LOCAL_TIMERS is not set
 CONFIG_AEABI=y
 CONFIG_LEDS=y

arch/arm/mach-omap2/Kconfig

@@ -310,6 +310,7 @@ config MACH_OMAP_4430SDP
 	depends on ARCH_OMAP4
 	select OMAP_PACKAGE_CBL
 	select OMAP_PACKAGE_CBS
+	select REGULATOR_FIXED_VOLTAGE
 
 config MACH_OMAP4_PANDA
 	bool "OMAP4 Panda Board"
@@ -317,6 +318,7 @@ config MACH_OMAP4_PANDA
 	depends on ARCH_OMAP4
 	select OMAP_PACKAGE_CBL
 	select OMAP_PACKAGE_CBS
+	select REGULATOR_FIXED_VOLTAGE
 
 config OMAP3_EMU
 	bool "OMAP3 debugging peripherals"

arch/arm/mach-omap2/board-2430sdp.c

@@ -22,6 +22,7 @@
 #include <linux/mmc/host.h>
 #include <linux/delay.h>
 #include <linux/i2c/twl.h>
+#include <linux/regulator/machine.h>
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/io.h>
@@ -147,6 +148,25 @@ static void __init omap_2430sdp_init_early(void)
 	omap2_init_common_devices(NULL, NULL);
 }
 
+static struct regulator_consumer_supply sdp2430_vmmc1_supplies[] = {
+	REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.0"),
+};
+
+/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
+static struct regulator_init_data sdp2430_vmmc1 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(sdp2430_vmmc1_supplies),
+	.consumer_supplies	= &sdp2430_vmmc1_supplies[0],
+};
+
 static struct twl4030_gpio_platform_data sdp2430_gpio_data = {
 	.gpio_base	= OMAP_MAX_GPIO_LINES,
 	.irq_base	= TWL4030_GPIO_IRQ_BASE,
@@ -159,6 +179,7 @@ static struct twl4030_platform_data sdp2430_twldata = {
 
 	/* platform_data for children goes here */
 	.gpio		= &sdp2430_gpio_data,
+	.vmmc1		= &sdp2430_vmmc1,
 };
 
 static struct i2c_board_info __initdata sdp2430_i2c_boardinfo[] = {

arch/arm/mach-omap2/board-3430sdp.c

@@ -315,11 +315,6 @@ static struct platform_device sdp3430_dss_device = {
 	},
 };
 
-static struct regulator_consumer_supply sdp3430_vdda_dac_supply = {
-	.supply		= "vdda_dac",
-	.dev		= &sdp3430_dss_device.dev,
-};
-
 static struct platform_device *sdp3430_devices[] __initdata = {
 	&sdp3430_dss_device,
 };
@@ -369,18 +364,6 @@ static struct omap2_hsmmc_info mmc[] = {
 	{}	/* Terminator */
 };
 
-static struct regulator_consumer_supply sdp3430_vmmc1_supply = {
-	.supply			= "vmmc",
-};
-
-static struct regulator_consumer_supply sdp3430_vsim_supply = {
-	.supply			= "vmmc_aux",
-};
-
-static struct regulator_consumer_supply sdp3430_vmmc2_supply = {
-	.supply			= "vmmc",
-};
-
 static int sdp3430_twl_gpio_setup(struct device *dev,
 		unsigned gpio, unsigned ngpio)
 {
@@ -391,13 +374,6 @@ static int sdp3430_twl_gpio_setup(struct device *dev,
 	mmc[1].gpio_cd = gpio + 1;
 	omap2_hsmmc_init(mmc);
 
-	/* link regulators to MMC adapters ... we "know" the
-	 * regulators will be set up only *after* we return.
-	 */
-	sdp3430_vmmc1_supply.dev = mmc[0].dev;
-	sdp3430_vsim_supply.dev = mmc[0].dev;
-	sdp3430_vmmc2_supply.dev = mmc[1].dev;
-
 	/* gpio + 7 is "sub_lcd_en_bkl" (output/PWM1) */
 	gpio_request(gpio + 7, "sub_lcd_en_bkl");
 	gpio_direction_output(gpio + 7, 0);
@@ -426,6 +402,34 @@ static struct twl4030_madc_platform_data sdp3430_madc_data = {
 	.irq_line	= 1,
 };
 
+/* regulator consumer mappings */
+
+/* ads7846 on SPI */
+static struct regulator_consumer_supply sdp3430_vaux3_supplies[] = {
+	REGULATOR_SUPPLY("vcc", "spi1.0"),
+};
+
+static struct regulator_consumer_supply sdp3430_vdda_dac_supplies[] = {
+	REGULATOR_SUPPLY("vdda_dac", "omapdss"),
+};
+
+/* VPLL2 for digital video outputs */
+static struct regulator_consumer_supply sdp3430_vpll2_supplies[] = {
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
+};
+
+static struct regulator_consumer_supply sdp3430_vmmc1_supplies[] = {
+	REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.0"),
+};
+
+static struct regulator_consumer_supply sdp3430_vsim_supplies[] = {
+	REGULATOR_SUPPLY("vmmc_aux", "mmci-omap-hs.0"),
+};
+
+static struct regulator_consumer_supply sdp3430_vmmc2_supplies[] = {
+	REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.1"),
+};
+
 /*
  * Apply all the fixed voltages since most versions of U-Boot
  * don't bother with that initialization.
@@ -468,6 +472,8 @@ static struct regulator_init_data sdp3430_vaux3 = {
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
+	.num_consumer_supplies		= ARRAY_SIZE(sdp3430_vaux3_supplies),
+	.consumer_supplies		= sdp3430_vaux3_supplies,
 };
 
 /* VAUX4 for OMAP VDD_CSI2 (camera) */
@@ -494,8 +500,8 @@ static struct regulator_init_data sdp3430_vmmc1 = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &sdp3430_vmmc1_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(sdp3430_vmmc1_supplies),
+	.consumer_supplies	= sdp3430_vmmc1_supplies,
 };
 
 /* VMMC2 for MMC2 card */
@@ -509,8 +515,8 @@ static struct regulator_init_data sdp3430_vmmc2 = {
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &sdp3430_vmmc2_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(sdp3430_vmmc2_supplies),
+	.consumer_supplies	= sdp3430_vmmc2_supplies,
 };
 
 /* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */
@@ -524,8 +530,8 @@ static struct regulator_init_data sdp3430_vsim = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &sdp3430_vsim_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(sdp3430_vsim_supplies),
+	.consumer_supplies	= sdp3430_vsim_supplies,
 };
 
 /* VDAC for DSS driving S-Video */
@@ -539,16 +545,8 @@ static struct regulator_init_data sdp3430_vdac = {
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &sdp3430_vdda_dac_supply,
-};
-
-/* VPLL2 for digital video outputs */
-static struct regulator_consumer_supply sdp3430_vpll2_supplies[] = {
-	{
-		.supply		= "vdds_dsi",
-		.dev		= &sdp3430_dss_device.dev,
-	}
+	.num_consumer_supplies	= ARRAY_SIZE(sdp3430_vdda_dac_supplies),
+	.consumer_supplies	= sdp3430_vdda_dac_supplies,
 };
 
 static struct regulator_init_data sdp3430_vpll2 = {
@@ -812,7 +810,7 @@ static void __init omap_3430sdp_init(void)
 	omap_serial_init();
 	usb_musb_init(&musb_board_data);
 	board_smc91x_init();
-	board_flash_init(sdp_flash_partitions, chip_sel_3430);
+	board_flash_init(sdp_flash_partitions, chip_sel_3430, 0);
 	sdp3430_display_init();
 	enable_board_wakeup_source();
 	usb_ehci_init(&ehci_pdata);

arch/arm/mach-omap2/board-3630sdp.c

@@ -11,6 +11,7 @@
 #include <linux/platform_device.h>
 #include <linux/input.h>
 #include <linux/gpio.h>
+#include <linux/mtd/nand.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -208,7 +209,7 @@ static void __init omap_sdp_init(void)
 	zoom_peripherals_init();
 	zoom_display_init();
 	board_smc91x_init();
-	board_flash_init(sdp_flash_partitions, chip_sel_sdp);
+	board_flash_init(sdp_flash_partitions, chip_sel_sdp, NAND_BUSWIDTH_16);
 	enable_board_wakeup_source();
 	usb_ehci_init(&ehci_pdata);
 }

arch/arm/mach-omap2/board-4430sdp.c

@@ -35,6 +35,7 @@
 #include <plat/common.h>
 #include <plat/usb.h>
 #include <plat/mmc.h>
+#include <plat/omap4-keypad.h>
 
 #include "mux.h"
 #include "hsmmc.h"
@@ -47,6 +48,90 @@
 #define OMAP4_SFH7741_SENSOR_OUTPUT_GPIO	184
 #define OMAP4_SFH7741_ENABLE_GPIO		188
 
+static const int sdp4430_keymap[] = {
+	KEY(0, 0, KEY_E),
+	KEY(0, 1, KEY_R),
+	KEY(0, 2, KEY_T),
+	KEY(0, 3, KEY_HOME),
+	KEY(0, 4, KEY_F5),
+	KEY(0, 5, KEY_UNKNOWN),
+	KEY(0, 6, KEY_I),
+	KEY(0, 7, KEY_LEFTSHIFT),
+
+	KEY(1, 0, KEY_D),
+	KEY(1, 1, KEY_F),
+	KEY(1, 2, KEY_G),
+	KEY(1, 3, KEY_SEND),
+	KEY(1, 4, KEY_F6),
+	KEY(1, 5, KEY_UNKNOWN),
+	KEY(1, 6, KEY_K),
+	KEY(1, 7, KEY_ENTER),
+
+	KEY(2, 0, KEY_X),
+	KEY(2, 1, KEY_C),
+	KEY(2, 2, KEY_V),
+	KEY(2, 3, KEY_END),
+	KEY(2, 4, KEY_F7),
+	KEY(2, 5, KEY_UNKNOWN),
+	KEY(2, 6, KEY_DOT),
+	KEY(2, 7, KEY_CAPSLOCK),
+
+	KEY(3, 0, KEY_Z),
+	KEY(3, 1, KEY_KPPLUS),
+	KEY(3, 2, KEY_B),
+	KEY(3, 3, KEY_F1),
+	KEY(3, 4, KEY_F8),
+	KEY(3, 5, KEY_UNKNOWN),
+	KEY(3, 6, KEY_O),
+	KEY(3, 7, KEY_SPACE),
+
+	KEY(4, 0, KEY_W),
+	KEY(4, 1, KEY_Y),
+	KEY(4, 2, KEY_U),
+	KEY(4, 3, KEY_F2),
+	KEY(4, 4, KEY_VOLUMEUP),
+	KEY(4, 5, KEY_UNKNOWN),
+	KEY(4, 6, KEY_L),
+	KEY(4, 7, KEY_LEFT),
+
+	KEY(5, 0, KEY_S),
+	KEY(5, 1, KEY_H),
+	KEY(5, 2, KEY_J),
+	KEY(5, 3, KEY_F3),
+	KEY(5, 4, KEY_F9),
+	KEY(5, 5, KEY_VOLUMEDOWN),
+	KEY(5, 6, KEY_M),
+	KEY(5, 7, KEY_RIGHT),
+
+	KEY(6, 0, KEY_Q),
+	KEY(6, 1, KEY_A),
+	KEY(6, 2, KEY_N),
+	KEY(6, 3, KEY_BACK),
+	KEY(6, 4, KEY_BACKSPACE),
+	KEY(6, 5, KEY_UNKNOWN),
+	KEY(6, 6, KEY_P),
+	KEY(6, 7, KEY_UP),
+
+	KEY(7, 0, KEY_PROG1),
+	KEY(7, 1, KEY_PROG2),
+	KEY(7, 2, KEY_PROG3),
+	KEY(7, 3, KEY_PROG4),
+	KEY(7, 4, KEY_F4),
+	KEY(7, 5, KEY_UNKNOWN),
+	KEY(7, 6, KEY_OK),
+	KEY(7, 7, KEY_DOWN),
+};
+
+static struct matrix_keymap_data sdp4430_keymap_data = {
+	.keymap			= sdp4430_keymap,
+	.keymap_size		= ARRAY_SIZE(sdp4430_keymap),
+};
+
+static struct omap4_keypad_platform_data sdp4430_keypad_data = {
+	.keymap_data		= &sdp4430_keymap_data,
+	.rows			= 8,
+	.cols			= 8,
+};
 static struct gpio_led sdp4430_gpio_leds[] = {
 	{
 		.name	= "omap4:green:debug0",
@@ -422,7 +507,6 @@ static struct regulator_init_data sdp4430_vana = {
 	.constraints = {
 		.min_uV			= 2100000,
 		.max_uV			= 2100000,
-		.apply_uV		= true,
 		.valid_modes_mask	= REGULATOR_MODE_NORMAL
 					| REGULATOR_MODE_STANDBY,
 		.valid_ops_mask	 = REGULATOR_CHANGE_MODE
@@ -434,7 +518,6 @@ static struct regulator_init_data sdp4430_vcxio = {
 	.constraints = {
 		.min_uV			= 1800000,
 		.max_uV			= 1800000,
-		.apply_uV		= true,
 		.valid_modes_mask	= REGULATOR_MODE_NORMAL
 					| REGULATOR_MODE_STANDBY,
 		.valid_ops_mask	 = REGULATOR_CHANGE_MODE
@@ -446,7 +529,6 @@ static struct regulator_init_data sdp4430_vdac = {
 	.constraints = {
 		.min_uV			= 1800000,
 		.max_uV			= 1800000,
-		.apply_uV		= true,
 		.valid_modes_mask	= REGULATOR_MODE_NORMAL
 					| REGULATOR_MODE_STANDBY,
 		.valid_ops_mask	 = REGULATOR_CHANGE_MODE
@@ -574,6 +656,10 @@ static void __init omap_4430sdp_init(void)
 		spi_register_board_info(sdp4430_spi_board_info,
 				ARRAY_SIZE(sdp4430_spi_board_info));
 	}
+
+	status = omap4_keyboard_init(&sdp4430_keypad_data);
+	if (status)
+		pr_err("Keypad initialization failed: %d\n", status);
 }
 
 static void __init omap_4430sdp_map_io(void)

arch/arm/mach-omap2/board-flash.c

 /*
- * board-sdp-flash.c
+ * board-flash.c
  * Modified from mach-omap2/board-3430sdp-flash.c
  *
  * Copyright (C) 2009 Nokia Corporation
@@ -16,6 +16,7 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
 #include <linux/io.h>
+#include <plat/irqs.h>
 
 #include <plat/gpmc.h>
 #include <plat/nand.h>
@@ -73,11 +74,11 @@ __init board_nor_init(struct mtd_partition *nor_parts, u8 nr_parts, u8 cs)
 					+ FLASH_SIZE_SDPV1 - 1;
 	}
 	if (err < 0) {
-		printk(KERN_ERR "NOR: Can't request GPMC CS\n");
+		pr_err("NOR: Can't request GPMC CS\n");
 		return;
 	}
 	if (platform_device_register(&board_nor_device) < 0)
-		printk(KERN_ERR	"Unable to register NOR device\n");
+		pr_err("Unable to register NOR device\n");
 }
 
 #if defined(CONFIG_MTD_ONENAND_OMAP2) || \
@@ -139,12 +140,16 @@ static struct omap_nand_platform_data board_nand_data = {
 };
 
 void
-__init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs)
+__init board_nand_init(struct mtd_partition *nand_parts,
+			u8 nr_parts, u8 cs, int nand_type)
 {
 	board_nand_data.cs		= cs;
 	board_nand_data.parts		= nand_parts;
 	board_nand_data.nr_parts	= nr_parts;
+	board_nand_data.devsize		= nand_type;
 
+	board_nand_data.ecc_opt = OMAP_ECC_HAMMING_CODE_DEFAULT;
+	board_nand_data.gpmc_irq = OMAP_GPMC_IRQ_BASE + cs;
 	gpmc_nand_init(&board_nand_data);
 }
 #else
@@ -189,12 +194,12 @@ static u8 get_gpmc0_type(void)
 }
 
 /**
- * sdp3430_flash_init - Identify devices connected to GPMC and register.
+ * board_flash_init - Identify devices connected to GPMC and register.
  *
  * @return - void.
  */
 void board_flash_init(struct flash_partitions partition_info[],
-					char chip_sel_board[][GPMC_CS_NUM])
+			char chip_sel_board[][GPMC_CS_NUM], int nand_type)
 {
 	u8		cs = 0;
 	u8		norcs = GPMC_CS_NUM + 1;
@@ -208,7 +213,7 @@ void board_flash_init(struct flash_partitions partition_info[],
 	 */
 	idx = get_gpmc0_type();
 	if (idx >= MAX_SUPPORTED_GPMC_CONFIG) {
-		printk(KERN_ERR "%s: Invalid chip select: %d\n", __func__, cs);
+		pr_err("%s: Invalid chip select: %d\n", __func__, cs);
 		return;
 	}
 	config_sel = (unsigned char *)(chip_sel_board[idx]);
@@ -232,23 +237,20 @@ void board_flash_init(struct flash_partitions partition_info[],
 	}
 
 	if (norcs > GPMC_CS_NUM)
-		printk(KERN_INFO "NOR: Unable to find configuration "
-				"in GPMC\n");
+		pr_err("NOR: Unable to find configuration in GPMC\n");
 	else
 		board_nor_init(partition_info[0].parts,
 				partition_info[0].nr_parts, norcs);
 
 	if (onenandcs > GPMC_CS_NUM)
-		printk(KERN_INFO "OneNAND: Unable to find configuration "
-				"in GPMC\n");
+		pr_err("OneNAND: Unable to find configuration in GPMC\n");
 	else
 		board_onenand_init(partition_info[1].parts,
 					partition_info[1].nr_parts, onenandcs);
 
 	if (nandcs > GPMC_CS_NUM)
-		printk(KERN_INFO "NAND: Unable to find configuration "
-				"in GPMC\n");
+		pr_err("NAND: Unable to find configuration in GPMC\n");
 	else
 		board_nand_init(partition_info[2].parts,
-				partition_info[2].nr_parts, nandcs);
+			partition_info[2].nr_parts, nandcs, nand_type);
 }

arch/arm/mach-omap2/board-flash.h

@@ -25,6 +25,6 @@ struct flash_partitions {
 };
 
 extern void board_flash_init(struct flash_partitions [],
-				char chip_sel[][GPMC_CS_NUM]);
+				char chip_sel[][GPMC_CS_NUM], int nand_type);
 extern void board_nand_init(struct mtd_partition *nand_parts,
-					u8 nr_parts, u8 cs);
+					u8 nr_parts, u8 cs, int nand_type);

arch/arm/mach-omap2/board-ldp.c

@@ -433,7 +433,7 @@ static void __init omap_ldp_init(void)
 	omap_serial_init();
 	usb_musb_init(&musb_board_data);
 	board_nand_init(ldp_nand_partitions,
-		ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS);
+		ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS, 0);
 
 	omap2_hsmmc_init(mmc);
 	/* link regulators to MMC adapters */

arch/arm/mach-omap2/board-omap4panda.c

@@ -26,6 +26,8 @@
 #include <linux/usb/otg.h>
 #include <linux/i2c/twl.h>
 #include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+#include <linux/wl12xx.h>
 
 #include <mach/hardware.h>
 #include <mach/omap4-common.h>
@@ -45,6 +47,8 @@
 
 #define GPIO_HUB_POWER		1
 #define GPIO_HUB_NRESET		62
+#define GPIO_WIFI_PMENA		43
+#define GPIO_WIFI_IRQ		53
 
 static struct gpio_led gpio_leds[] = {
 	{
@@ -161,6 +165,15 @@ static struct omap2_hsmmc_info mmc[] = {
 		.gpio_wp	= -EINVAL,
 		.gpio_cd	= -EINVAL,
 	},
+	{
+		.name		= "wl1271",
+		.mmc		= 5,
+		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
+		.gpio_wp	= -EINVAL,
+		.gpio_cd	= -EINVAL,
+		.ocr_mask	= MMC_VDD_165_195,
+		.nonremovable	= true,
+	},
 	{}	/* Terminator */
 };
 
@@ -171,6 +184,43 @@ static struct regulator_consumer_supply omap4_panda_vmmc_supply[] = {
 	},
 };
 
+static struct regulator_consumer_supply omap4_panda_vmmc5_supply = {
+	.supply = "vmmc",
+	.dev_name = "mmci-omap-hs.4",
+};
+
+static struct regulator_init_data panda_vmmc5 = {
+	.constraints = {
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies = 1,
+	.consumer_supplies = &omap4_panda_vmmc5_supply,
+};
+
+static struct fixed_voltage_config panda_vwlan = {
+	.supply_name = "vwl1271",
+	.microvolts = 1800000, /* 1.8V */
+	.gpio = GPIO_WIFI_PMENA,
+	.startup_delay = 70000, /* 70msec */
+	.enable_high = 1,
+	.enabled_at_boot = 0,
+	.init_data = &panda_vmmc5,
+};
+
+static struct platform_device omap_vwlan_device = {
+	.name		= "reg-fixed-voltage",
+	.id		= 1,
+	.dev = {
+		.platform_data = &panda_vwlan,
+	},
+};
+
+struct wl12xx_platform_data omap_panda_wlan_data  __initdata = {
+	.irq = OMAP_GPIO_IRQ(GPIO_WIFI_IRQ),
+	/* PANDA ref clock is 38.4 MHz */
+	.board_ref_clock = 2,
+};
+
 static int omap4_twl6030_hsmmc_late_init(struct device *dev)
 {
 	int ret = 0;
@@ -304,7 +354,6 @@ static struct regulator_init_data omap4_panda_vana = {
 	.constraints = {
 		.min_uV			= 2100000,
 		.max_uV			= 2100000,
-		.apply_uV		= true,
 		.valid_modes_mask	= REGULATOR_MODE_NORMAL
 					| REGULATOR_MODE_STANDBY,
 		.valid_ops_mask	 = REGULATOR_CHANGE_MODE
@@ -316,7 +365,6 @@ static struct regulator_init_data omap4_panda_vcxio = {
 	.constraints = {
 		.min_uV			= 1800000,
 		.max_uV			= 1800000,
-		.apply_uV		= true,
 		.valid_modes_mask	= REGULATOR_MODE_NORMAL
 					| REGULATOR_MODE_STANDBY,
 		.valid_ops_mask	 = REGULATOR_CHANGE_MODE
@@ -328,7 +376,6 @@ static struct regulator_init_data omap4_panda_vdac = {
 	.constraints = {
 		.min_uV			= 1800000,
 		.max_uV			= 1800000,
-		.apply_uV		= true,
 		.valid_modes_mask	= REGULATOR_MODE_NORMAL
 					| REGULATOR_MODE_STANDBY,
 		.valid_ops_mask	 = REGULATOR_CHANGE_MODE
@@ -390,6 +437,19 @@ static int __init omap4_panda_i2c_init(void)
 
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
+	/* WLAN IRQ - GPIO 53 */
+	OMAP4_MUX(GPMC_NCS3, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
+	/* WLAN POWER ENABLE - GPIO 43 */
+	OMAP4_MUX(GPMC_A19, OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT),
+	/* WLAN SDIO: MMC5 CMD */
+	OMAP4_MUX(SDMMC5_CMD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
+	/* WLAN SDIO: MMC5 CLK */
+	OMAP4_MUX(SDMMC5_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
+	/* WLAN SDIO: MMC5 DAT[0-3] */
+	OMAP4_MUX(SDMMC5_DAT0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
+	OMAP4_MUX(SDMMC5_DAT1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
+	OMAP4_MUX(SDMMC5_DAT2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
+	OMAP4_MUX(SDMMC5_DAT3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
 #else
@@ -404,8 +464,12 @@ static void __init omap4_panda_init(void)
 		package = OMAP_PACKAGE_CBL;
 	omap4_mux_init(board_mux, package);
 
+	if (wl12xx_set_platform_data(&omap_panda_wlan_data))
+		pr_err("error setting wl12xx data\n");
+
 	omap4_panda_i2c_init();
 	platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
+	platform_device_register(&omap_vwlan_device);
 	omap_serial_init();
 	omap4_twl6030_hsmmc_init(mmc);
 	omap4_ehci_init();

arch/arm/mach-omap2/board-zoom.c

@@ -16,6 +16,7 @@
 #include <linux/input.h>
 #include <linux/gpio.h>
 #include <linux/i2c/twl.h>
+#include <linux/mtd/nand.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -124,8 +125,8 @@ static void __init omap_zoom_init(void)
 		usb_ehci_init(&ehci_pdata);
 	}
 
-	board_nand_init(zoom_nand_partitions,
-			ARRAY_SIZE(zoom_nand_partitions), ZOOM_NAND_CS);
+	board_nand_init(zoom_nand_partitions, ARRAY_SIZE(zoom_nand_partitions),
+						ZOOM_NAND_CS, NAND_BUSWIDTH_16);
 	zoom_debugboard_init();
 	zoom_peripherals_init();
 	zoom_display_init();

arch/arm/mach-omap2/clkt_clksel.c

@@ -97,7 +97,7 @@ static u8 _get_div_and_fieldval(struct clk *src_clk, struct clk *clk,
 				u32 *field_val)
 {
 	const struct clksel *clks;
-	const struct clksel_rate *clkr, *max_clkr;
+	const struct clksel_rate *clkr, *max_clkr = NULL;
 	u8 max_div = 0;
 
 	clks = _get_clksel_by_parent(clk, src_clk);

arch/arm/mach-omap2/devices.c

@@ -31,6 +31,7 @@
 #include <plat/dma.h>
 #include <plat/omap_hwmod.h>
 #include <plat/omap_device.h>
+#include <plat/omap4-keypad.h>
 
 #include "mux.h"
 #include "control.h"
@@ -142,6 +143,46 @@ static inline void omap_init_camera(void)
 }
 #endif
 
+struct omap_device_pm_latency omap_keyboard_latency[] = {
+	{
+		.deactivate_func = omap_device_idle_hwmods,
+		.activate_func   = omap_device_enable_hwmods,
+		.flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
+	},
+};
+
+int __init omap4_keyboard_init(struct omap4_keypad_platform_data
+						*sdp4430_keypad_data)
+{
+	struct omap_device *od;
+	struct omap_hwmod *oh;
+	struct omap4_keypad_platform_data *keypad_data;
+	unsigned int id = -1;
+	char *oh_name = "kbd";
+	char *name = "omap4-keypad";
+
+	oh = omap_hwmod_lookup(oh_name);
+	if (!oh) {
+		pr_err("Could not look up %s\n", oh_name);
+		return -ENODEV;
+	}
+
+	keypad_data = sdp4430_keypad_data;
+
+	od = omap_device_build(name, id, oh, keypad_data,
+			sizeof(struct omap4_keypad_platform_data),
+			omap_keyboard_latency,
+			ARRAY_SIZE(omap_keyboard_latency), 0);
+
+	if (IS_ERR(od)) {
+		WARN(1, "Cant build omap_device for %s:%s.\n",
+						name, oh->name);
+		return PTR_ERR(od);
+	}
+
+	return 0;
+}
+
 #if defined(CONFIG_OMAP_MBOX_FWK) || defined(CONFIG_OMAP_MBOX_FWK_MODULE)
 
 #define MBOX_REG_SIZE   0x120

arch/arm/mach-omap2/gpmc-nand.c

@@ -12,6 +12,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/mtd/nand.h>
 
 #include <asm/mach/flash.h>
 
@@ -69,8 +70,10 @@ static int omap2_nand_gpmc_retime(void)
 	t.wr_cycle  = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->wr_cycle);
 
 	/* Configure GPMC */
-	gpmc_cs_configure(gpmc_nand_data->cs,
-				GPMC_CONFIG_DEV_SIZE, gpmc_nand_data->devsize);
+	if (gpmc_nand_data->devsize == NAND_BUSWIDTH_16)
+		gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_DEV_SIZE, 1);
+	else
+		gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_DEV_SIZE, 0);
 	gpmc_cs_configure(gpmc_nand_data->cs,
 			GPMC_CONFIG_DEV_TYPE, GPMC_DEVICETYPE_NAND);
 	err = gpmc_cs_set_timings(gpmc_nand_data->cs, &t);

arch/arm/mach-omap2/gpmc-onenand.c

@@ -94,7 +94,7 @@ static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base)
 }
 
 static void set_onenand_cfg(void __iomem *onenand_base, int latency,
-				int sync_read, int sync_write, int hf)
+				int sync_read, int sync_write, int hf, int vhf)
 {
 	u32 reg;
 
@@ -114,12 +114,57 @@ static void set_onenand_cfg(void __iomem *onenand_base, int latency,
 		reg |= ONENAND_SYS_CFG1_HF;
 	else
 		reg &= ~ONENAND_SYS_CFG1_HF;
+	if (vhf)
+		reg |= ONENAND_SYS_CFG1_VHF;
+	else
+		reg &= ~ONENAND_SYS_CFG1_VHF;
 	writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
 }
 
+static int omap2_onenand_get_freq(struct omap_onenand_platform_data *cfg,
+				  void __iomem *onenand_base, bool *clk_dep)
+{
+	u16 ver = readw(onenand_base + ONENAND_REG_VERSION_ID);
+	int freq = 0;
+
+	if (cfg->get_freq) {
+		struct onenand_freq_info fi;
+
+		fi.maf_id = readw(onenand_base + ONENAND_REG_MANUFACTURER_ID);
+		fi.dev_id = readw(onenand_base + ONENAND_REG_DEVICE_ID);
+		fi.ver_id = ver;
+		freq = cfg->get_freq(&fi, clk_dep);
+		if (freq)
+			return freq;
+	}
+
+	switch ((ver >> 4) & 0xf) {
+	case 0:
+		freq = 40;
+		break;
+	case 1:
+		freq = 54;
+		break;
+	case 2:
+		freq = 66;
+		break;
+	case 3:
+		freq = 83;
+		break;
+	case 4:
+		freq = 104;
+		break;
+	default:
+		freq = 54;
+		break;
+	}
+
+	return freq;
+}
+
 static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
 					void __iomem *onenand_base,
-					int freq)
+					int *freq_ptr)
 {
 	struct gpmc_timings t;
 	const int t_cer  = 15;
@@ -130,10 +175,11 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
 	const int t_wph  = 30;
 	int min_gpmc_clk_period, t_ces, t_avds, t_avdh, t_ach, t_aavdh, t_rdyo;
 	int tick_ns, div, fclk_offset_ns, fclk_offset, gpmc_clk_ns, latency;
-	int first_time = 0, hf = 0, sync_read = 0, sync_write = 0;
+	int first_time = 0, hf = 0, vhf = 0, sync_read = 0, sync_write = 0;
 	int err, ticks_cez;
-	int cs = cfg->cs;
+	int cs = cfg->cs, freq = *freq_ptr;
 	u32 reg;
+	bool clk_dep = false;
 
 	if (cfg->flags & ONENAND_SYNC_READ) {
 		sync_read = 1;
@@ -148,27 +194,7 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
 		err = omap2_onenand_set_async_mode(cs, onenand_base);
 		if (err)
 			return err;
-		reg = readw(onenand_base + ONENAND_REG_VERSION_ID);
-		switch ((reg >> 4) & 0xf) {
-		case 0:
-			freq = 40;
-			break;
-		case 1:
-			freq = 54;
-			break;
-		case 2:
-			freq = 66;
-			break;
-		case 3:
-			freq = 83;
-			break;
-		case 4:
-			freq = 104;
-			break;
-		default:
-			freq = 54;
-			break;
-		}
+		freq = omap2_onenand_get_freq(cfg, onenand_base, &clk_dep);
 		first_time = 1;
 	}
 
@@ -180,7 +206,7 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
 		t_avdh  = 2;
 		t_ach   = 3;
 		t_aavdh = 6;
-		t_rdyo  = 9;
+		t_rdyo  = 6;
 		break;
 	case 83:
 		min_gpmc_clk_period = 12000; /* 83 MHz */
@@ -217,16 +243,36 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
 	gpmc_clk_ns = gpmc_ticks_to_ns(div);
 	if (gpmc_clk_ns < 15) /* >66Mhz */
 		hf = 1;
-	if (hf)
+	if (gpmc_clk_ns < 12) /* >83Mhz */
+		vhf = 1;
+	if (vhf)
+		latency = 8;
+	else if (hf)
 		latency = 6;
 	else if (gpmc_clk_ns >= 25) /* 40 MHz*/
 		latency = 3;
 	else
 		latency = 4;
 
+	if (clk_dep) {
+		if (gpmc_clk_ns < 12) { /* >83Mhz */
+			t_ces   = 3;
+			t_avds  = 4;
+		} else if (gpmc_clk_ns < 15) { /* >66Mhz */
+			t_ces   = 5;
+			t_avds  = 4;
+		} else if (gpmc_clk_ns < 25) { /* >40Mhz */
+			t_ces   = 6;
+			t_avds  = 5;
+		} else {
+			t_ces   = 7;
+			t_avds  = 7;
+		}
+	}
+
 	if (first_time)
 		set_onenand_cfg(onenand_base, latency,
-					sync_read, sync_write, hf);
+					sync_read, sync_write, hf, vhf);
 
 	if (div == 1) {
 		reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG2);
@@ -264,6 +310,9 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
 	/* Read */
 	t.adv_rd_off = gpmc_ticks_to_ns(fclk_offset + gpmc_ns_to_ticks(t_avdh));
 	t.oe_on = gpmc_ticks_to_ns(fclk_offset + gpmc_ns_to_ticks(t_ach));
+	/* Force at least 1 clk between AVD High to OE Low */
+	if (t.oe_on <= t.adv_rd_off)
+		t.oe_on = t.adv_rd_off + gpmc_round_ns_to_ticks(1);
 	t.access = gpmc_ticks_to_ns(fclk_offset + (latency + 1) * div);
 	t.oe_off = t.access + gpmc_round_ns_to_ticks(1);
 	t.cs_rd_off = t.oe_off;
@@ -317,18 +366,20 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
 	if (err)
 		return err;
 
-	set_onenand_cfg(onenand_base, latency, sync_read, sync_write, hf);
+	set_onenand_cfg(onenand_base, latency, sync_read, sync_write, hf, vhf);
+
+	*freq_ptr = freq;
 
 	return 0;
 }
 
-static int gpmc_onenand_setup(void __iomem *onenand_base, int freq)
+static int gpmc_onenand_setup(void __iomem *onenand_base, int *freq_ptr)
 {
 	struct device *dev = &gpmc_onenand_device.dev;
 
 	/* Set sync timings in GPMC */
 	if (omap2_onenand_set_sync_mode(gpmc_onenand_data, onenand_base,
-			freq) < 0) {
+			freq_ptr) < 0) {
 		dev_err(dev, "Unable to set synchronous mode\n");
 		return -EINVAL;
 	}

arch/arm/mach-omap2/gpmc.c

@@ -14,6 +14,7 @@
  */
 #undef DEBUG
 
+#include <linux/irq.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/err.h>
@@ -22,6 +23,7 @@
 #include <linux/spinlock.h>
 #include <linux/io.h>
 #include <linux/module.h>
+#include <linux/interrupt.h>
 
 #include <asm/mach-types.h>
 #include <plat/gpmc.h>
@@ -58,7 +60,6 @@
 #define GPMC_CHUNK_SHIFT	24		/* 16 MB */
 #define GPMC_SECTION_SHIFT	28		/* 128 MB */
 
-#define PREFETCH_FIFOTHRESHOLD	(0x40 << 8)
 #define CS_NUM_SHIFT		24
 #define ENABLE_PREFETCH		(0x1 << 7)
 #define DMA_MPU_MODE		2
@@ -100,6 +101,8 @@ static void __iomem *gpmc_base;
 
 static struct clk *gpmc_l3_clk;
 
+static irqreturn_t gpmc_handle_irq(int irq, void *dev);
+
 static void gpmc_write_reg(int idx, u32 val)
 {
 	__raw_writel(val, gpmc_base + idx);
@@ -497,6 +500,10 @@ int gpmc_cs_configure(int cs, int cmd, int wval)
 	u32 regval = 0;
 
 	switch (cmd) {
+	case GPMC_ENABLE_IRQ:
+		gpmc_write_reg(GPMC_IRQENABLE, wval);
+		break;
+
 	case GPMC_SET_IRQ_STATUS:
 		gpmc_write_reg(GPMC_IRQSTATUS, wval);
 		break;
@@ -598,15 +605,19 @@ EXPORT_SYMBOL(gpmc_nand_write);
 /**
  * gpmc_prefetch_enable - configures and starts prefetch transfer
  * @cs: cs (chip select) number
+ * @fifo_th: fifo threshold to be used for read/ write
  * @dma_mode: dma mode enable (1) or disable (0)
  * @u32_count: number of bytes to be transferred
  * @is_write: prefetch read(0) or write post(1) mode
  */
-int gpmc_prefetch_enable(int cs, int dma_mode,
+int gpmc_prefetch_enable(int cs, int fifo_th, int dma_mode,
 				unsigned int u32_count, int is_write)
 {
 
-	if (!(gpmc_read_reg(GPMC_PREFETCH_CONTROL))) {
+	if (fifo_th > PREFETCH_FIFOTHRESHOLD_MAX) {
+		pr_err("gpmc: fifo threshold is not supported\n");
+		return -1;
+	} else if (!(gpmc_read_reg(GPMC_PREFETCH_CONTROL))) {
 		/* Set the amount of bytes to be prefetched */
 		gpmc_write_reg(GPMC_PREFETCH_CONFIG2, u32_count);
 
@@ -614,7 +625,7 @@ int gpmc_prefetch_enable(int cs, int dma_mode,
 		 * enable the engine. Set which cs is has requested for.
 		 */
 		gpmc_write_reg(GPMC_PREFETCH_CONFIG1, ((cs << CS_NUM_SHIFT) |
-					PREFETCH_FIFOTHRESHOLD |
+					PREFETCH_FIFOTHRESHOLD(fifo_th) |
 					ENABLE_PREFETCH |
 					(dma_mode << DMA_MPU_MODE) |
 					(0x1 & is_write)));
@@ -678,9 +689,10 @@ static void __init gpmc_mem_init(void)
 	}
 }
 
-void __init gpmc_init(void)
+static int __init gpmc_init(void)
 {
-	u32 l;
+	u32 l, irq;
+	int cs, ret = -EINVAL;
 	char *ck = NULL;
 
 	if (cpu_is_omap24xx()) {
@@ -698,7 +710,7 @@ void __init gpmc_init(void)
 	}
 
 	if (WARN_ON(!ck))
-		return;
+		return ret;
 
 	gpmc_l3_clk = clk_get(NULL, ck);
 	if (IS_ERR(gpmc_l3_clk)) {
@@ -723,6 +735,36 @@ void __init gpmc_init(void)
 	l |= (0x02 << 3) | (1 << 0);
 	gpmc_write_reg(GPMC_SYSCONFIG, l);
 	gpmc_mem_init();
+
+	/* initalize the irq_chained */
+	irq = OMAP_GPMC_IRQ_BASE;
+	for (cs = 0; cs < GPMC_CS_NUM; cs++) {
+		set_irq_handler(irq, handle_simple_irq);
+		set_irq_flags(irq, IRQF_VALID);
+		irq++;
+	}
+
+	ret = request_irq(INT_34XX_GPMC_IRQ,
+			gpmc_handle_irq, IRQF_SHARED, "gpmc", gpmc_base);
+	if (ret)
+		pr_err("gpmc: irq-%d could not claim: err %d\n",
+						INT_34XX_GPMC_IRQ, ret);
+	return ret;
+}
+postcore_initcall(gpmc_init);
+
+static irqreturn_t gpmc_handle_irq(int irq, void *dev)
+{
+	u8 cs;
+
+	if (irq != INT_34XX_GPMC_IRQ)
+		return IRQ_HANDLED;
+	/* check cs to invoke the irq */
+	cs = ((gpmc_read_reg(GPMC_PREFETCH_CONFIG1)) >> CS_NUM_SHIFT) & 0x7;
+	if (OMAP_GPMC_IRQ_BASE+cs <= OMAP_GPMC_IRQ_END)
+		generic_handle_irq(OMAP_GPMC_IRQ_BASE+cs);
+
+	return IRQ_HANDLED;
 }
 
 #ifdef CONFIG_ARCH_OMAP3

arch/arm/mach-omap2/hsmmc.c

@@ -350,6 +350,11 @@ void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers)
 				mmc->slots[0].after_set_reg = NULL;
 			}
 			break;
+		case 4:
+		case 5:
+			mmc->slots[0].before_set_reg = NULL;
+			mmc->slots[0].after_set_reg = NULL;
+			break;
 		default:
 			pr_err("MMC%d configuration not supported!\n", c->mmc);
 			kfree(mmc);

arch/arm/mach-omap2/id.c

@@ -6,7 +6,7 @@
  * Copyright (C) 2005 Nokia Corporation
  * Written by Tony Lindgren <tony@atomide.com>
  *
- * Copyright (C) 2009 Texas Instruments
+ * Copyright (C) 2009-11 Texas Instruments
  * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -328,7 +328,7 @@ static void __init omap4_check_revision(void)
 	 */
 	idcode = read_tap_reg(OMAP_TAP_IDCODE);
 	hawkeye = (idcode >> 12) & 0xffff;
-	rev = (idcode >> 28) & 0xff;
+	rev = (idcode >> 28) & 0xf;
 
 	/*
 	 * Few initial ES2.0 samples IDCODE is same as ES1.0
@@ -347,22 +347,31 @@ static void __init omap4_check_revision(void)
 			omap_chip.oc |= CHIP_IS_OMAP4430ES1;
 			break;
 		case 1:
+		default:
 			omap_revision = OMAP4430_REV_ES2_0;
 			omap_chip.oc |= CHIP_IS_OMAP4430ES2;
+		}
+		break;
+	case 0xb95c:
+		switch (rev) {
+		case 3:
+			omap_revision = OMAP4430_REV_ES2_1;
+			omap_chip.oc |= CHIP_IS_OMAP4430ES2_1;
 			break;
+		case 4:
 		default:
-			omap_revision = OMAP4430_REV_ES2_0;
-			omap_chip.oc |= CHIP_IS_OMAP4430ES2;
+			omap_revision = OMAP4430_REV_ES2_2;
+			omap_chip.oc |= CHIP_IS_OMAP4430ES2_2;
 		}
 		break;
 	default:
-		/* Unknown default to latest silicon rev as default*/
-		omap_revision = OMAP4430_REV_ES2_0;
-		omap_chip.oc |= CHIP_IS_OMAP4430ES2;
+		/* Unknown default to latest silicon rev as default */
+		omap_revision = OMAP4430_REV_ES2_2;
+		omap_chip.oc |= CHIP_IS_OMAP4430ES2_2;
 	}
 
-	pr_info("OMAP%04x ES%d.0\n",
-			omap_rev() >> 16, ((omap_rev() >> 12) & 0xf) + 1);
+	pr_info("OMAP%04x ES%d.%d\n", omap_rev() >> 16,
+		((omap_rev() >> 12) & 0xf), ((omap_rev() >> 8) & 0xf));
 }
 
 #define OMAP3_SHOW_FEATURE(feat)		\

arch/arm/mach-omap2/io.c

@@ -30,7 +30,6 @@
 
 #include <plat/sram.h>
 #include <plat/sdrc.h>
-#include <plat/gpmc.h>
 #include <plat/serial.h>
 
 #include "clock2xxx.h"
@@ -422,7 +421,6 @@ void __init omap2_init_common_devices(struct omap_sdrc_params *sdrc_cs0,
 		omap2_sdrc_init(sdrc_cs0, sdrc_cs1);
 		_omap2_init_reprogram_sdrc();
 	}
-	gpmc_init();
 
 	omap_irq_base_init();
 }

arch/arm/plat-omap/include/plat/cpu.h

@@ -5,7 +5,7 @@
  *
  * Copyright (C) 2004, 2008 Nokia Corporation
  *
- * Copyright (C) 2009 Texas Instruments.
+ * Copyright (C) 2009-11 Texas Instruments.
  *
  * Written by Tony Lindgren <tony.lindgren@nokia.com>
  *
@@ -405,8 +405,10 @@ IS_OMAP_TYPE(3517, 0x3517)
 #define TI8168_REV_ES1_1	(TI816X_CLASS | (OMAP_REVBITS_01 << 8))
 
 #define OMAP443X_CLASS		0x44300044
-#define OMAP4430_REV_ES1_0	OMAP443X_CLASS
-#define OMAP4430_REV_ES2_0	0x44301044
+#define OMAP4430_REV_ES1_0	(OMAP443X_CLASS | (0x10 << 8))
+#define OMAP4430_REV_ES2_0	(OMAP443X_CLASS | (0x20 << 8))
+#define OMAP4430_REV_ES2_1	(OMAP443X_CLASS | (0x21 << 8))
+#define OMAP4430_REV_ES2_2	(OMAP443X_CLASS | (0x22 << 8))
 
 /*
  * omap_chip bits
@@ -434,12 +436,16 @@ IS_OMAP_TYPE(3517, 0x3517)
 #define CHIP_IS_OMAP3630ES1_1           (1 << 9)
 #define CHIP_IS_OMAP3630ES1_2           (1 << 10)
 #define CHIP_IS_OMAP4430ES2		(1 << 11)
+#define CHIP_IS_OMAP4430ES2_1		(1 << 12)
+#define CHIP_IS_OMAP4430ES2_2		(1 << 13)
 #define CHIP_IS_TI816X			(1 << 14)
 
 #define CHIP_IS_OMAP24XX		(CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430)
 
 #define CHIP_IS_OMAP4430		(CHIP_IS_OMAP4430ES1 |		\
-						 CHIP_IS_OMAP4430ES2)
+					 CHIP_IS_OMAP4430ES2 |		\
+					 CHIP_IS_OMAP4430ES2_1 |	\
+					 CHIP_IS_OMAP4430ES2_2)
 
 /*
  * "GE" here represents "greater than or equal to" in terms of ES

arch/arm/plat-omap/include/plat/gpmc.h

@@ -41,6 +41,8 @@
 #define GPMC_NAND_ADDRESS	0x0000000b
 #define GPMC_NAND_DATA		0x0000000c
 
+#define GPMC_ENABLE_IRQ		0x0000000d
+
 /* ECC commands */
 #define GPMC_ECC_READ		0 /* Reset Hardware ECC for read */
 #define GPMC_ECC_WRITE		1 /* Reset Hardware ECC for write */
@@ -78,6 +80,19 @@
 #define WR_RD_PIN_MONITORING		0x00600000
 #define GPMC_PREFETCH_STATUS_FIFO_CNT(val)	((val >> 24) & 0x7F)
 #define GPMC_PREFETCH_STATUS_COUNT(val)	(val & 0x00003fff)
+#define GPMC_IRQ_FIFOEVENTENABLE	0x01
+#define GPMC_IRQ_COUNT_EVENT		0x02
+
+#define PREFETCH_FIFOTHRESHOLD_MAX	0x40
+#define PREFETCH_FIFOTHRESHOLD(val)	((val) << 8)
+
+enum omap_ecc {
+		/* 1-bit ecc: stored at end of spare area */
+	OMAP_ECC_HAMMING_CODE_DEFAULT = 0, /* Default, s/w method */
+	OMAP_ECC_HAMMING_CODE_HW, /* gpmc to detect the error */
+		/* 1-bit ecc: stored at begining of spare area as romcode */
+	OMAP_ECC_HAMMING_CODE_HW_ROMCODE, /* gpmc method & romcode layout */
+};
 
 /*
  * Note that all values in this struct are in nanoseconds except sync_clk
@@ -130,12 +145,11 @@ extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base);
 extern void gpmc_cs_free(int cs);
 extern int gpmc_cs_set_reserved(int cs, int reserved);
 extern int gpmc_cs_reserved(int cs);
-extern int gpmc_prefetch_enable(int cs, int dma_mode,
+extern int gpmc_prefetch_enable(int cs, int fifo_th, int dma_mode,
 					unsigned int u32_count, int is_write);
 extern int gpmc_prefetch_reset(int cs);
 extern void omap3_gpmc_save_context(void);
 extern void omap3_gpmc_restore_context(void);
-extern void gpmc_init(void);
 extern int gpmc_read_status(int cmd);
 extern int gpmc_cs_configure(int cs, int cmd, int wval);
 extern int gpmc_nand_read(int cs, int cmd);

arch/arm/plat-omap/include/plat/iommu.h

@@ -154,6 +154,8 @@ extern void flush_iotlb_range(struct iommu *obj, u32 start, u32 end);
 extern void flush_iotlb_all(struct iommu *obj);
 
 extern int iopgtable_store_entry(struct iommu *obj, struct iotlb_entry *e);
+extern void iopgtable_lookup_entry(struct iommu *obj, u32 da, u32 **ppgd,
+				   u32 **ppte);
 extern size_t iopgtable_clear_entry(struct iommu *obj, u32 iova);
 
 extern int iommu_set_da_range(struct iommu *obj, u32 start, u32 end);

arch/arm/plat-omap/include/plat/irqs.h

@@ -318,6 +318,7 @@
 #define INT_34XX_PRCM_MPU_IRQ	11
 #define INT_34XX_MCBSP1_IRQ	16
 #define INT_34XX_MCBSP2_IRQ	17
+#define INT_34XX_GPMC_IRQ	20
 #define INT_34XX_MCBSP3_IRQ	22
 #define INT_34XX_MCBSP4_IRQ	23
 #define INT_34XX_CAM_IRQ	24
@@ -411,7 +412,13 @@
 #define TWL_IRQ_END		TWL6030_IRQ_END
 #endif
 
-#define NR_IRQS			TWL_IRQ_END
+/* GPMC related */
+#define OMAP_GPMC_IRQ_BASE	(TWL_IRQ_END)
+#define OMAP_GPMC_NR_IRQS	7
+#define OMAP_GPMC_IRQ_END	(OMAP_GPMC_IRQ_BASE + OMAP_GPMC_NR_IRQS)
+
+
+#define NR_IRQS			OMAP_GPMC_IRQ_END
 
 #define OMAP_IRQ_BIT(irq)	(1 << ((irq) % 32))
 

arch/arm/plat-omap/include/plat/nand.h

@@ -8,8 +8,16 @@
  * published by the Free Software Foundation.
  */
 
+#include <plat/gpmc.h>
 #include <linux/mtd/partitions.h>
 
+enum nand_io {
+	NAND_OMAP_PREFETCH_POLLED = 0,	/* prefetch polled mode, default */
+	NAND_OMAP_POLLED,		/* polled mode, without prefetch */
+	NAND_OMAP_PREFETCH_DMA,		/* prefetch enabled sDMA mode */
+	NAND_OMAP_PREFETCH_IRQ		/* prefetch enabled irq mode */
+};
+
 struct omap_nand_platform_data {
 	unsigned int		options;
 	int			cs;
@@ -20,8 +28,11 @@ struct omap_nand_platform_data {
 	int			(*nand_setup)(void);
 	int			(*dev_ready)(struct omap_nand_platform_data *);
 	int			dma_channel;
+	int			gpmc_irq;
+	enum nand_io		xfer_type;
 	unsigned long		phys_base;
 	int			devsize;
+	enum omap_ecc           ecc_opt;
 };
 
 /* minimum size for IO mapping */

arch/arm/plat-omap/include/plat/onenand.h

@@ -15,12 +15,20 @@
 #define ONENAND_SYNC_READ	(1 << 0)
 #define ONENAND_SYNC_READWRITE	(1 << 1)
 
+struct onenand_freq_info {
+	u16			maf_id;
+	u16			dev_id;
+	u16			ver_id;
+};
+
 struct omap_onenand_platform_data {
 	int			cs;
 	int			gpio_irq;
 	struct mtd_partition	*parts;
 	int			nr_parts;
-	int                     (*onenand_setup)(void __iomem *, int freq);
+	int			(*onenand_setup)(void __iomem *, int *freq_ptr);
+	int		(*get_freq)(const struct onenand_freq_info *freq_info,
+				    bool *clk_dep);
 	int			dma_channel;
 	u8			flags;
 	u8			regulator_can_sleep;

arch/arm/plat-omap/sram.c

@@ -405,20 +405,6 @@ static inline int omap34xx_sram_init(void)
 }
 #endif
 
-#ifdef CONFIG_ARCH_OMAP4
-static int __init omap44xx_sram_init(void)
-{
-	printk(KERN_ERR "FIXME: %s not implemented\n", __func__);
-
-	return -ENODEV;
-}
-#else
-static inline int omap44xx_sram_init(void)
-{
-	return 0;
-}
-#endif
-
 int __init omap_sram_init(void)
 {
 	omap_detect_sram();
@@ -432,8 +418,6 @@ int __init omap_sram_init(void)
 		omap243x_sram_init();
 	else if (cpu_is_omap34xx())
 		omap34xx_sram_init();
-	else if (cpu_is_omap44xx())
-		omap44xx_sram_init();
 
 	return 0;
 }

drivers/mmc/host/omap_hsmmc.c

@@ -260,7 +260,7 @@ static int omap_hsmmc_1_set_power(struct device *dev, int slot, int power_on,
 	return ret;
 }
 
-static int omap_hsmmc_23_set_power(struct device *dev, int slot, int power_on,
+static int omap_hsmmc_235_set_power(struct device *dev, int slot, int power_on,
 				   int vdd)
 {
 	struct omap_hsmmc_host *host =
@@ -316,6 +316,12 @@ static int omap_hsmmc_23_set_power(struct device *dev, int slot, int power_on,
 	return ret;
 }
 
+static int omap_hsmmc_4_set_power(struct device *dev, int slot, int power_on,
+					int vdd)
+{
+	return 0;
+}
+
 static int omap_hsmmc_1_set_sleep(struct device *dev, int slot, int sleep,
 				  int vdd, int cardsleep)
 {
@@ -326,7 +332,7 @@ static int omap_hsmmc_1_set_sleep(struct device *dev, int slot, int sleep,
 	return regulator_set_mode(host->vcc, mode);
 }
 
-static int omap_hsmmc_23_set_sleep(struct device *dev, int slot, int sleep,
+static int omap_hsmmc_235_set_sleep(struct device *dev, int slot, int sleep,
 				   int vdd, int cardsleep)
 {
 	struct omap_hsmmc_host *host =
@@ -365,6 +371,12 @@ static int omap_hsmmc_23_set_sleep(struct device *dev, int slot, int sleep,
 		return regulator_enable(host->vcc_aux);
 }
 
+static int omap_hsmmc_4_set_sleep(struct device *dev, int slot, int sleep,
+					int vdd, int cardsleep)
+{
+	return 0;
+}
+
 static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host)
 {
 	struct regulator *reg;
@@ -379,10 +391,14 @@ static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host)
 		break;
 	case OMAP_MMC2_DEVID:
 	case OMAP_MMC3_DEVID:
+	case OMAP_MMC5_DEVID:
 		/* Off-chip level shifting, or none */
-		mmc_slot(host).set_power = omap_hsmmc_23_set_power;
-		mmc_slot(host).set_sleep = omap_hsmmc_23_set_sleep;
+		mmc_slot(host).set_power = omap_hsmmc_235_set_power;
+		mmc_slot(host).set_sleep = omap_hsmmc_235_set_sleep;
 		break;
+	case OMAP_MMC4_DEVID:
+		mmc_slot(host).set_power = omap_hsmmc_4_set_power;
+		mmc_slot(host).set_sleep = omap_hsmmc_4_set_sleep;
 	default:
 		pr_err("MMC%d configuration not supported!\n", host->id);
 		return -EINVAL;

drivers/mtd/nand/Kconfig

@@ -106,23 +106,6 @@ config MTD_NAND_OMAP2
 	help
           Support for NAND flash on Texas Instruments OMAP2 and OMAP3 platforms.
 
-config MTD_NAND_OMAP_PREFETCH
-	bool "GPMC prefetch support for NAND Flash device"
-	depends on MTD_NAND_OMAP2
-	default y
-	help
-	 The NAND device can be accessed for Read/Write using GPMC PREFETCH engine
-	 to improve the performance.
-
-config MTD_NAND_OMAP_PREFETCH_DMA
-	depends on MTD_NAND_OMAP_PREFETCH
-	bool "DMA mode"
-	default n
-	help
-	 The GPMC PREFETCH engine can be configured eigther in MPU interrupt mode
-	 or in DMA interrupt mode.
-	 Say y for DMA mode or MPU mode will be used
-
 config MTD_NAND_IDS
 	tristate
 

drivers/mtd/onenand/omap2.c

@@ -63,7 +63,7 @@ struct omap2_onenand {
 	struct completion dma_done;
 	int dma_channel;
 	int freq;
-	int (*setup)(void __iomem *base, int freq);
+	int (*setup)(void __iomem *base, int *freq_ptr);
 	struct regulator *regulator;
 };
 
@@ -148,11 +148,9 @@ static int omap2_onenand_wait(struct mtd_info *mtd, int state)
 			wait_err("controller error", state, ctrl, intr);
 			return -EIO;
 		}
-		if ((intr & intr_flags) != intr_flags) {
-			wait_err("timeout", state, ctrl, intr);
-			return -EIO;
-		}
+		if ((intr & intr_flags) == intr_flags)
 			return 0;
+		/* Continue in wait for interrupt branch */
 	}
 
 	if (state != FL_READING) {
@@ -581,7 +579,7 @@ static int __adjust_timing(struct device *dev, void *data)
 
 	/* DMA is not in use so this is all that is needed */
 	/* Revisit for OMAP3! */
-	ret = c->setup(c->onenand.base, c->freq);
+	ret = c->setup(c->onenand.base, &c->freq);
 
 	return ret;
 }
@@ -673,7 +671,7 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev)
 	}
 
 	if (pdata->onenand_setup != NULL) {
-		r = pdata->onenand_setup(c->onenand.base, c->freq);
+		r = pdata->onenand_setup(c->onenand.base, &c->freq);
 		if (r < 0) {
 			dev_err(&pdev->dev, "Onenand platform setup failed: "
 				"%d\n", r);
@@ -718,8 +716,8 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev)
 	}
 
 	dev_info(&pdev->dev, "initializing on CS%d, phys base 0x%08lx, virtual "
-		 "base %p\n", c->gpmc_cs, c->phys_base,
-		 c->onenand.base);
+		 "base %p, freq %d MHz\n", c->gpmc_cs, c->phys_base,
+		 c->onenand.base, c->freq);
 
 	c->pdev = pdev;
 	c->mtd.name = dev_name(&pdev->dev);
@@ -754,24 +752,6 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev)
 	if ((r = onenand_scan(&c->mtd, 1)) < 0)
 		goto err_release_regulator;
 
-	switch ((c->onenand.version_id >> 4) & 0xf) {
-	case 0:
-		c->freq = 40;
-		break;
-	case 1:
-		c->freq = 54;
-		break;
-	case 2:
-		c->freq = 66;
-		break;
-	case 3:
-		c->freq = 83;
-		break;
-	case 4:
-		c->freq = 104;
-		break;
-	}
-
 #ifdef CONFIG_MTD_PARTITIONS
 	r = parse_mtd_partitions(&c->mtd, part_probes, &c->parts, 0);
 	if (r > 0)

include/linux/mtd/onenand_regs.h

@@ -168,6 +168,7 @@
 #define ONENAND_SYS_CFG1_INT		(1 << 6)
 #define ONENAND_SYS_CFG1_IOBE		(1 << 5)
 #define ONENAND_SYS_CFG1_RDY_CONF	(1 << 4)
+#define ONENAND_SYS_CFG1_VHF		(1 << 3)
 #define ONENAND_SYS_CFG1_HF		(1 << 2)
 #define ONENAND_SYS_CFG1_SYNC_WRITE	(1 << 1)