Merge branches 'clk-aspeed', 'clk-lock-UP', 'clk-mediatek' and 'clk-allwinner' into clk-next

* clk-aspeed:
  clk: aspeed: Handle inverse polarity of USB port 1 clock gate
  clk: aspeed: Fix return value check in aspeed_cc_init()
  clk: aspeed: Add reset controller
  clk: aspeed: Register gated clocks
  clk: aspeed: Add platform driver and register PLLs
  clk: aspeed: Register core clocks
  clk: Add clock driver for ASPEED BMC SoCs
  dt-bindings: clock: Add ASPEED constants

* clk-lock-UP:
  clk: fix reentrancy of clk_enable() on UP systems

* clk-mediatek:
  clk: mediatek: adjust dependency of reset.c to avoid unexpectedly being built
  clk: mediatek: Fix all warnings for missing struct clk_onecell_data
  clk: mediatek: fixup test-building of MediaTek clock drivers
  clk: mediatek: group drivers under indpendent menu

* clk-allwinner:
  clk: sunxi-ng: a83t: Add M divider to TCON1 clock
  clk: sunxi-ng: fix the A64/H5 clock description of DE2 CCU
  clk: sunxi-ng: add support for Allwinner H3 DE2 CCU
  dt-bindings: fix the binding of Allwinner DE2 CCU of A83T and H3
  clk: sunxi-ng: sun8i: a83t: Use sigma-delta modulation for audio PLL
  clk: sunxi-ng: sun8i: a83t: Add /2 fixed post divider to audio PLL
  clk: sunxi-ng: Support fixed post-dividers on NM style clocks
  clk: sunxi-ng: sun50i: a64: Add 2x fixed post-divider to MMC module clocks
  clk: sunxi-ng: Support fixed post-dividers on MP style clocks
  clk: sunxi: Use PTR_ERR_OR_ZERO()

Documentation/devicetree/bindings/clock/sun8i-de2.txt

@@ -4,13 +4,14 @@ Allwinner Display Engine 2.0 Clock Control Binding
 Required properties :
 - compatible: must contain one of the following compatibles:
 		- "allwinner,sun8i-a83t-de2-clk"
+		- "allwinner,sun8i-h3-de2-clk"
 		- "allwinner,sun8i-v3s-de2-clk"
 		- "allwinner,sun50i-h5-de2-clk"
 
 - reg: Must contain the registers base address and length
 - clocks: phandle to the clocks feeding the display engine subsystem.
 	  Three are needed:
-  - "mod": the display engine module clock
+  - "mod": the display engine module clock (on A83T it's the DE PLL)
   - "bus": the bus clock for the whole display engine subsystem
 - clock-names: Must contain the clock names described just above
 - resets: phandle to the reset control for the display engine subsystem.
@@ -19,7 +20,7 @@ Required properties :
 
 Example:
 de2_clocks: clock@1000000 {
-	compatible = "allwinner,sun8i-a83t-de2-clk";
+	compatible = "allwinner,sun8i-h3-de2-clk";
 	reg = <0x01000000 0x100000>;
 	clocks = <&ccu CLK_BUS_DE>,
 		 <&ccu CLK_DE>;

drivers/clk/Kconfig

@@ -142,6 +142,18 @@ config COMMON_CLK_GEMINI
 	  This driver supports the SoC clocks on the Cortina Systems Gemini
 	  platform, also known as SL3516 or CS3516.
 
+config COMMON_CLK_ASPEED
+	bool "Clock driver for Aspeed BMC SoCs"
+	depends on ARCH_ASPEED || COMPILE_TEST
+	default ARCH_ASPEED
+	select MFD_SYSCON
+	select RESET_CONTROLLER
+	---help---
+	  This driver supports the SoC clocks on the Aspeed BMC platforms.
+
+	  The G4 and G5 series, including the ast2400 and ast2500, are supported
+	  by this driver.
+
 config COMMON_CLK_S2MPS11
 	tristate "Clock driver for S2MPS1X/S5M8767 MFD"
 	depends on MFD_SEC_CORE || COMPILE_TEST

drivers/clk/Makefile

@@ -27,6 +27,7 @@ obj-$(CONFIG_ARCH_CLPS711X)		+= clk-clps711x.o
 obj-$(CONFIG_COMMON_CLK_CS2000_CP)	+= clk-cs2000-cp.o
 obj-$(CONFIG_ARCH_EFM32)		+= clk-efm32gg.o
 obj-$(CONFIG_COMMON_CLK_GEMINI)		+= clk-gemini.o
+obj-$(CONFIG_COMMON_CLK_ASPEED)		+= clk-aspeed.o
 obj-$(CONFIG_ARCH_HIGHBANK)		+= clk-highbank.o
 obj-$(CONFIG_CLK_HSDK)			+= clk-hsdk-pll.o
 obj-$(CONFIG_COMMON_CLK_MAX77686)	+= clk-max77686.o
@@ -67,7 +68,7 @@ obj-$(CONFIG_ARCH_MXC)			+= imx/
 obj-$(CONFIG_MACH_INGENIC)		+= ingenic/
 obj-$(CONFIG_ARCH_KEYSTONE)		+= keystone/
 obj-$(CONFIG_MACH_LOONGSON32)		+= loongson1/
-obj-$(CONFIG_ARCH_MEDIATEK)		+= mediatek/
+obj-y					+= mediatek/
 obj-$(CONFIG_COMMON_CLK_AMLOGIC)	+= meson/
 obj-$(CONFIG_MACH_PIC32)		+= microchip/
 ifeq ($(CONFIG_COMMON_CLK), y)

drivers/clk/clk.c

@@ -144,10 +144,18 @@ static unsigned long clk_enable_lock(void)
 {
 	unsigned long flags;
 
-	if (!spin_trylock_irqsave(&enable_lock, flags)) {
+	/*
+	 * On UP systems, spin_trylock_irqsave() always returns true, even if
+	 * we already hold the lock. So, in that case, we rely only on
+	 * reference counting.
+	 */
+	if (!IS_ENABLED(CONFIG_SMP) ||
+	    !spin_trylock_irqsave(&enable_lock, flags)) {
 		if (enable_owner == current) {
 			enable_refcnt++;
 			__acquire(enable_lock);
+			if (!IS_ENABLED(CONFIG_SMP))
+				local_save_flags(flags);
 			return flags;
 		}
 		spin_lock_irqsave(&enable_lock, flags);

drivers/clk/mediatek/Kconfig

 #
-# MediaTek SoC drivers
+# MediaTek Clock Drivers
 #
+menu "Clock driver for MediaTek SoC"
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+
 config COMMON_CLK_MEDIATEK
 	bool
+	select RESET_CONTROLLER
 	---help---
-	  Mediatek SoCs' clock support.
+	  MediaTek SoCs' clock support.
 
 config COMMON_CLK_MT2701
-	bool "Clock driver for Mediatek MT2701"
+	bool "Clock driver for MediaTek MT2701"
 	depends on (ARCH_MEDIATEK && ARM) || COMPILE_TEST
 	select COMMON_CLK_MEDIATEK
 	default ARCH_MEDIATEK && ARM
 	---help---
-	  This driver supports Mediatek MT2701 basic clocks.
+	  This driver supports MediaTek MT2701 basic clocks.
 
 config COMMON_CLK_MT2701_MMSYS
-	bool "Clock driver for Mediatek MT2701 mmsys"
+	bool "Clock driver for MediaTek MT2701 mmsys"
 	depends on COMMON_CLK_MT2701
 	---help---
-	  This driver supports Mediatek MT2701 mmsys clocks.
+	  This driver supports MediaTek MT2701 mmsys clocks.
 
 config COMMON_CLK_MT2701_IMGSYS
-	bool "Clock driver for Mediatek MT2701 imgsys"
+	bool "Clock driver for MediaTek MT2701 imgsys"
 	depends on COMMON_CLK_MT2701
 	---help---
-	  This driver supports Mediatek MT2701 imgsys clocks.
+	  This driver supports MediaTek MT2701 imgsys clocks.
 
 config COMMON_CLK_MT2701_VDECSYS
-	bool "Clock driver for Mediatek MT2701 vdecsys"
+	bool "Clock driver for MediaTek MT2701 vdecsys"
 	depends on COMMON_CLK_MT2701
 	---help---
-	  This driver supports Mediatek MT2701 vdecsys clocks.
+	  This driver supports MediaTek MT2701 vdecsys clocks.
 
 config COMMON_CLK_MT2701_HIFSYS
-	bool "Clock driver for Mediatek MT2701 hifsys"
+	bool "Clock driver for MediaTek MT2701 hifsys"
 	depends on COMMON_CLK_MT2701
 	---help---
-	  This driver supports Mediatek MT2701 hifsys clocks.
+	  This driver supports MediaTek MT2701 hifsys clocks.
 
 config COMMON_CLK_MT2701_ETHSYS
-	bool "Clock driver for Mediatek MT2701 ethsys"
+	bool "Clock driver for MediaTek MT2701 ethsys"
 	depends on COMMON_CLK_MT2701
 	---help---
-	  This driver supports Mediatek MT2701 ethsys clocks.
+	  This driver supports MediaTek MT2701 ethsys clocks.
 
 config COMMON_CLK_MT2701_BDPSYS
-	bool "Clock driver for Mediatek MT2701 bdpsys"
+	bool "Clock driver for MediaTek MT2701 bdpsys"
 	depends on COMMON_CLK_MT2701
 	---help---
-	  This driver supports Mediatek MT2701 bdpsys clocks.
+	  This driver supports MediaTek MT2701 bdpsys clocks.
 
 config COMMON_CLK_MT2712
-	bool "Clock driver for Mediatek MT2712"
+	bool "Clock driver for MediaTek MT2712"
 	depends on (ARCH_MEDIATEK && ARM64) || COMPILE_TEST
 	select COMMON_CLK_MEDIATEK
 	default ARCH_MEDIATEK && ARM64
 	---help---
-	  This driver supports Mediatek MT2712 basic clocks.
+	  This driver supports MediaTek MT2712 basic clocks.
 
 config COMMON_CLK_MT2712_BDPSYS
-	bool "Clock driver for Mediatek MT2712 bdpsys"
+	bool "Clock driver for MediaTek MT2712 bdpsys"
 	depends on COMMON_CLK_MT2712
 	---help---
-	  This driver supports Mediatek MT2712 bdpsys clocks.
+	  This driver supports MediaTek MT2712 bdpsys clocks.
 
 config COMMON_CLK_MT2712_IMGSYS
-	bool "Clock driver for Mediatek MT2712 imgsys"
+	bool "Clock driver for MediaTek MT2712 imgsys"
 	depends on COMMON_CLK_MT2712
 	---help---
-	  This driver supports Mediatek MT2712 imgsys clocks.
+	  This driver supports MediaTek MT2712 imgsys clocks.
 
 config COMMON_CLK_MT2712_JPGDECSYS
-	bool "Clock driver for Mediatek MT2712 jpgdecsys"
+	bool "Clock driver for MediaTek MT2712 jpgdecsys"
 	depends on COMMON_CLK_MT2712
 	---help---
-	  This driver supports Mediatek MT2712 jpgdecsys clocks.
+	  This driver supports MediaTek MT2712 jpgdecsys clocks.
 
 config COMMON_CLK_MT2712_MFGCFG
-	bool "Clock driver for Mediatek MT2712 mfgcfg"
+	bool "Clock driver for MediaTek MT2712 mfgcfg"
 	depends on COMMON_CLK_MT2712
 	---help---
-	  This driver supports Mediatek MT2712 mfgcfg clocks.
+	  This driver supports MediaTek MT2712 mfgcfg clocks.
 
 config COMMON_CLK_MT2712_MMSYS
-	bool "Clock driver for Mediatek MT2712 mmsys"
+	bool "Clock driver for MediaTek MT2712 mmsys"
 	depends on COMMON_CLK_MT2712
 	---help---
-	  This driver supports Mediatek MT2712 mmsys clocks.
+	  This driver supports MediaTek MT2712 mmsys clocks.
 
 config COMMON_CLK_MT2712_VDECSYS
-	bool "Clock driver for Mediatek MT2712 vdecsys"
+	bool "Clock driver for MediaTek MT2712 vdecsys"
 	depends on COMMON_CLK_MT2712
 	---help---
-	  This driver supports Mediatek MT2712 vdecsys clocks.
+	  This driver supports MediaTek MT2712 vdecsys clocks.
 
 config COMMON_CLK_MT2712_VENCSYS
-	bool "Clock driver for Mediatek MT2712 vencsys"
+	bool "Clock driver for MediaTek MT2712 vencsys"
 	depends on COMMON_CLK_MT2712
 	---help---
-	  This driver supports Mediatek MT2712 vencsys clocks.
+	  This driver supports MediaTek MT2712 vencsys clocks.
 
 config COMMON_CLK_MT6797
-       bool "Clock driver for Mediatek MT6797"
+       bool "Clock driver for MediaTek MT6797"
        depends on (ARCH_MEDIATEK && ARM64) || COMPILE_TEST
        select COMMON_CLK_MEDIATEK
        default ARCH_MEDIATEK && ARM64
        ---help---
-         This driver supports Mediatek MT6797 basic clocks.
+         This driver supports MediaTek MT6797 basic clocks.
 
 config COMMON_CLK_MT6797_MMSYS
-       bool "Clock driver for Mediatek MT6797 mmsys"
+       bool "Clock driver for MediaTek MT6797 mmsys"
        depends on COMMON_CLK_MT6797
        ---help---
-         This driver supports Mediatek MT6797 mmsys clocks.
+         This driver supports MediaTek MT6797 mmsys clocks.
 
 config COMMON_CLK_MT6797_IMGSYS
-       bool "Clock driver for Mediatek MT6797 imgsys"
+       bool "Clock driver for MediaTek MT6797 imgsys"
        depends on COMMON_CLK_MT6797
        ---help---
-         This driver supports Mediatek MT6797 imgsys clocks.
+         This driver supports MediaTek MT6797 imgsys clocks.
 
 config COMMON_CLK_MT6797_VDECSYS
-       bool "Clock driver for Mediatek MT6797 vdecsys"
+       bool "Clock driver for MediaTek MT6797 vdecsys"
        depends on COMMON_CLK_MT6797
        ---help---
-         This driver supports Mediatek MT6797 vdecsys clocks.
+         This driver supports MediaTek MT6797 vdecsys clocks.
 
 config COMMON_CLK_MT6797_VENCSYS
-       bool "Clock driver for Mediatek MT6797 vencsys"
+       bool "Clock driver for MediaTek MT6797 vencsys"
        depends on COMMON_CLK_MT6797
        ---help---
-         This driver supports Mediatek MT6797 vencsys clocks.
+         This driver supports MediaTek MT6797 vencsys clocks.
 
 config COMMON_CLK_MT7622
 	bool "Clock driver for MediaTek MT7622"
@@ -163,17 +167,18 @@ config COMMON_CLK_MT7622_AUDSYS
 	  to audio consumers such as I2S and TDM.
 
 config COMMON_CLK_MT8135
-	bool "Clock driver for Mediatek MT8135"
+	bool "Clock driver for MediaTek MT8135"
 	depends on (ARCH_MEDIATEK && ARM) || COMPILE_TEST
 	select COMMON_CLK_MEDIATEK
 	default ARCH_MEDIATEK && ARM
 	---help---
-	  This driver supports Mediatek MT8135 clocks.
+	  This driver supports MediaTek MT8135 clocks.
 
 config COMMON_CLK_MT8173
-	bool "Clock driver for Mediatek MT8173"
+	bool "Clock driver for MediaTek MT8173"
 	depends on ARCH_MEDIATEK || COMPILE_TEST
 	select COMMON_CLK_MEDIATEK
 	default ARCH_MEDIATEK
 	---help---
-	  This driver supports Mediatek MT8173 clocks.
+	  This driver supports MediaTek MT8173 clocks.
+endmenu

drivers/clk/mediatek/Makefile

 # SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_COMMON_CLK_MEDIATEK) += clk-mtk.o clk-pll.o clk-gate.o clk-apmixed.o clk-cpumux.o
-obj-$(CONFIG_RESET_CONTROLLER) += reset.o
+obj-$(CONFIG_COMMON_CLK_MEDIATEK) += clk-mtk.o clk-pll.o clk-gate.o clk-apmixed.o clk-cpumux.o reset.o
 obj-$(CONFIG_COMMON_CLK_MT6797) += clk-mt6797.o
 obj-$(CONFIG_COMMON_CLK_MT6797_IMGSYS) += clk-mt6797-img.o
 obj-$(CONFIG_COMMON_CLK_MT6797_MMSYS) += clk-mt6797-mm.o

drivers/clk/mediatek/clk-mtk.h

@@ -20,6 +20,7 @@
 #include <linux/clk-provider.h>
 
 struct clk;
+struct clk_onecell_data;
 
 #define MAX_MUX_GATE_BIT	31
 #define INVALID_MUX_GATE_BIT	(MAX_MUX_GATE_BIT + 1)
@@ -228,14 +229,7 @@ void mtk_clk_register_plls(struct device_node *node,
 struct clk *mtk_clk_register_ref2usb_tx(const char *name,
 			const char *parent_name, void __iomem *reg);
 
-#ifdef CONFIG_RESET_CONTROLLER
 void mtk_register_reset_controller(struct device_node *np,
 			unsigned int num_regs, int regofs);
-#else
-static inline void mtk_register_reset_controller(struct device_node *np,
-			unsigned int num_regs, int regofs)
-{
-}
-#endif
 
 #endif /* __DRV_CLK_MTK_H */

drivers/clk/sunxi-ng/ccu-sun50i-a64.c

@@ -400,28 +400,45 @@ static SUNXI_CCU_MP_WITH_MUX_GATE(nand_clk, "nand", mod0_default_parents, 0x080,
 				  BIT(31),	/* gate */
 				  0);
 
+/*
+ * MMC clocks are the new timing mode (see A83T & H3) variety, but without
+ * the mode switch. This means they have a 2x post divider between the clock
+ * and the MMC module. This is not documented in the manual, but is taken
+ * into consideration when setting the mmc module clocks in the BSP kernel.
+ * Without it, MMC performance is degraded.
+ *
+ * We model it here to be consistent with other SoCs supporting this mode.
+ * The alternative would be to add the 2x multiplier when setting the MMC
+ * module clock in the MMC driver, just for the A64.
+ */
 static const char * const mmc_default_parents[] = { "osc24M", "pll-periph0-2x",
 						    "pll-periph1-2x" };
-static SUNXI_CCU_MP_WITH_MUX_GATE(mmc0_clk, "mmc0", mmc_default_parents, 0x088,
-				  0, 4,		/* M */
-				  16, 2,	/* P */
-				  24, 2,	/* mux */
-				  BIT(31),	/* gate */
-				  0);
-
-static SUNXI_CCU_MP_WITH_MUX_GATE(mmc1_clk, "mmc1", mmc_default_parents, 0x08c,
-				  0, 4,		/* M */
-				  16, 2,	/* P */
-				  24, 2,	/* mux */
-				  BIT(31),	/* gate */
-				  0);
-
-static SUNXI_CCU_MP_WITH_MUX_GATE(mmc2_clk, "mmc2", mmc_default_parents, 0x090,
-				  0, 4,		/* M */
-				  16, 2,	/* P */
-				  24, 2,	/* mux */
-				  BIT(31),	/* gate */
-				  0);
+static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc0_clk, "mmc0",
+					  mmc_default_parents, 0x088,
+					  0, 4,		/* M */
+					  16, 2,	/* P */
+					  24, 2,	/* mux */
+					  BIT(31),	/* gate */
+					  2,		/* post-div */
+					  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc1_clk, "mmc1",
+					  mmc_default_parents, 0x08c,
+					  0, 4,		/* M */
+					  16, 2,	/* P */
+					  24, 2,	/* mux */
+					  BIT(31),	/* gate */
+					  2,		/* post-div */
+					  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc2_clk, "mmc2",
+					  mmc_default_parents, 0x090,
+					  0, 4,		/* M */
+					  16, 2,	/* P */
+					  24, 2,	/* mux */
+					  BIT(31),	/* gate */
+					  2,		/* post-div */
+					  0);
 
 static const char * const ts_parents[] = { "osc24M", "pll-periph0", };
 static SUNXI_CCU_MP_WITH_MUX_GATE(ts_clk, "ts", ts_parents, 0x098,

drivers/clk/sunxi-ng/ccu-sun8i-a83t.c

@@ -76,15 +76,26 @@ static struct ccu_mult pll_c1cpux_clk = {
  */
 #define SUN8I_A83T_PLL_AUDIO_REG	0x008
 
+/* clock rates doubled for post divider */
+static struct ccu_sdm_setting pll_audio_sdm_table[] = {
+	{ .rate = 45158400, .pattern = 0xc00121ff, .m = 29, .n = 54 },
+	{ .rate = 49152000, .pattern = 0xc000e147, .m = 30, .n = 61 },
+};
+
 static struct ccu_nm pll_audio_clk = {
 	.enable		= BIT(31),
 	.lock		= BIT(2),
 	.n		= _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
 	.m		= _SUNXI_CCU_DIV(0, 6),
+	.fixed_post_div	= 2,
+	.sdm		= _SUNXI_CCU_SDM(pll_audio_sdm_table, BIT(24),
+					 0x284, BIT(31)),
 	.common		= {
 		.reg		= SUN8I_A83T_PLL_AUDIO_REG,
 		.lock_reg	= CCU_SUN8I_A83T_LOCK_REG,
-		.features	= CCU_FEATURE_LOCK_REG,
+		.features	= CCU_FEATURE_LOCK_REG |
+				  CCU_FEATURE_FIXED_POSTDIV |
+				  CCU_FEATURE_SIGMA_DELTA_MOD,
 		.hw.init	= CLK_HW_INIT("pll-audio", "osc24M",
 					      &ccu_nm_ops, CLK_SET_RATE_UNGATE),
 	},
@@ -493,8 +504,8 @@ static SUNXI_CCU_MUX_WITH_GATE(tcon0_clk, "tcon0", tcon0_parents,
 				 0x118, 24, 3, BIT(31), CLK_SET_RATE_PARENT);
 
 static const char * const tcon1_parents[] = { "pll-video1" };
-static SUNXI_CCU_MUX_WITH_GATE(tcon1_clk, "tcon1", tcon1_parents,
-				 0x11c, 24, 3, BIT(31), CLK_SET_RATE_PARENT);
+static SUNXI_CCU_M_WITH_MUX_GATE(tcon1_clk, "tcon1", tcon1_parents,
+				 0x11c, 0, 4, 24, 2, BIT(31), CLK_SET_RATE_PARENT);
 
 static SUNXI_CCU_GATE(csi_misc_clk, "csi-misc", "osc24M", 0x130, BIT(16), 0);
 
@@ -889,9 +900,10 @@ static int sun8i_a83t_ccu_probe(struct platform_device *pdev)
 	if (IS_ERR(reg))
 		return PTR_ERR(reg);
 
-	/* Enforce d1 = 0, d2 = 0 for Audio PLL */
+	/* Enforce d1 = 0, d2 = 1 for Audio PLL */
 	val = readl(reg + SUN8I_A83T_PLL_AUDIO_REG);
-	val &= ~(BIT(16) | BIT(18));
+	val &= ~BIT(16);
+	val |= BIT(18);
 	writel(val, reg + SUN8I_A83T_PLL_AUDIO_REG);
 
 	/* Enforce P = 1 for both CPU cluster PLLs */

drivers/clk/sunxi-ng/ccu-sun8i-de2.c

@@ -41,6 +41,8 @@ static SUNXI_CCU_GATE(wb_clk,		"wb",		"wb-div",
 
 static SUNXI_CCU_M(mixer0_div_clk, "mixer0-div", "de", 0x0c, 0, 4,
 		   CLK_SET_RATE_PARENT);
+static SUNXI_CCU_M(mixer1_div_clk, "mixer1-div", "de", 0x0c, 4, 4,
+		   CLK_SET_RATE_PARENT);
 static SUNXI_CCU_M(wb_div_clk, "wb-div", "de", 0x0c, 8, 4,
 		   CLK_SET_RATE_PARENT);
 
@@ -65,6 +67,20 @@ static struct ccu_common *sun8i_a83t_de2_clks[] = {
 	&wb_div_a83_clk.common,
 };
 
+static struct ccu_common *sun8i_h3_de2_clks[] = {
+	&mixer0_clk.common,
+	&mixer1_clk.common,
+	&wb_clk.common,
+
+	&bus_mixer0_clk.common,
+	&bus_mixer1_clk.common,
+	&bus_wb_clk.common,
+
+	&mixer0_div_clk.common,
+	&mixer1_div_clk.common,
+	&wb_div_clk.common,
+};
+
 static struct ccu_common *sun8i_v3s_de2_clks[] = {
 	&mixer0_clk.common,
 	&wb_clk.common,
@@ -93,6 +109,23 @@ static struct clk_hw_onecell_data sun8i_a83t_de2_hw_clks = {
 	.num	= CLK_NUMBER,
 };
 
+static struct clk_hw_onecell_data sun8i_h3_de2_hw_clks = {
+	.hws	= {
+		[CLK_MIXER0]		= &mixer0_clk.common.hw,
+		[CLK_MIXER1]		= &mixer1_clk.common.hw,
+		[CLK_WB]		= &wb_clk.common.hw,
+
+		[CLK_BUS_MIXER0]	= &bus_mixer0_clk.common.hw,
+		[CLK_BUS_MIXER1]	= &bus_mixer1_clk.common.hw,
+		[CLK_BUS_WB]		= &bus_wb_clk.common.hw,
+
+		[CLK_MIXER0_DIV]	= &mixer0_div_clk.common.hw,
+		[CLK_MIXER1_DIV]	= &mixer1_div_clk.common.hw,
+		[CLK_WB_DIV]		= &wb_div_clk.common.hw,
+	},
+	.num	= CLK_NUMBER,
+};
+
 static struct clk_hw_onecell_data sun8i_v3s_de2_hw_clks = {
 	.hws	= {
 		[CLK_MIXER0]		= &mixer0_clk.common.hw,
@@ -133,11 +166,21 @@ static const struct sunxi_ccu_desc sun8i_a83t_de2_clk_desc = {
 	.num_resets	= ARRAY_SIZE(sun8i_a83t_de2_resets),
 };
 
+static const struct sunxi_ccu_desc sun8i_h3_de2_clk_desc = {
+	.ccu_clks	= sun8i_h3_de2_clks,
+	.num_ccu_clks	= ARRAY_SIZE(sun8i_h3_de2_clks),
+
+	.hw_clks	= &sun8i_h3_de2_hw_clks,
+
+	.resets		= sun8i_a83t_de2_resets,
+	.num_resets	= ARRAY_SIZE(sun8i_a83t_de2_resets),
+};
+
 static const struct sunxi_ccu_desc sun50i_a64_de2_clk_desc = {
-	.ccu_clks	= sun8i_a83t_de2_clks,
-	.num_ccu_clks	= ARRAY_SIZE(sun8i_a83t_de2_clks),
+	.ccu_clks	= sun8i_h3_de2_clks,
+	.num_ccu_clks	= ARRAY_SIZE(sun8i_h3_de2_clks),
 
-	.hw_clks	= &sun8i_a83t_de2_hw_clks,
+	.hw_clks	= &sun8i_h3_de2_hw_clks,
 
 	.resets		= sun50i_a64_de2_resets,
 	.num_resets	= ARRAY_SIZE(sun50i_a64_de2_resets),
@@ -237,6 +280,10 @@ static const struct of_device_id sunxi_de2_clk_ids[] = {
 		.compatible = "allwinner,sun8i-a83t-de2-clk",
 		.data = &sun8i_a83t_de2_clk_desc,
 	},
+	{
+		.compatible = "allwinner,sun8i-h3-de2-clk",
+		.data = &sun8i_h3_de2_clk_desc,
+	},
 	{
 		.compatible = "allwinner,sun8i-v3s-de2-clk",
 		.data = &sun8i_v3s_de2_clk_desc,

drivers/clk/sunxi-ng/ccu_mp.c

@@ -50,12 +50,19 @@ static unsigned long ccu_mp_round_rate(struct ccu_mux_internal *mux,
 	unsigned int max_m, max_p;
 	unsigned int m, p;
 
+	if (cmp->common.features & CCU_FEATURE_FIXED_POSTDIV)
+		rate *= cmp->fixed_post_div;
+
 	max_m = cmp->m.max ?: 1 << cmp->m.width;
 	max_p = cmp->p.max ?: 1 << ((1 << cmp->p.width) - 1);
 
 	ccu_mp_find_best(*parent_rate, rate, max_m, max_p, &m, &p);
+	rate = *parent_rate / p / m;
+
+	if (cmp->common.features & CCU_FEATURE_FIXED_POSTDIV)
+		rate /= cmp->fixed_post_div;
 
-	return *parent_rate / p / m;
+	return rate;
 }
 
 static void ccu_mp_disable(struct clk_hw *hw)
@@ -83,6 +90,7 @@ static unsigned long ccu_mp_recalc_rate(struct clk_hw *hw,
 					unsigned long parent_rate)
 {
 	struct ccu_mp *cmp = hw_to_ccu_mp(hw);
+	unsigned long rate;
 	unsigned int m, p;
 	u32 reg;
 
@@ -101,7 +109,11 @@ static unsigned long ccu_mp_recalc_rate(struct clk_hw *hw,
 	p = reg >> cmp->p.shift;
 	p &= (1 << cmp->p.width) - 1;
 
-	return (parent_rate >> p) / m;
+	rate = (parent_rate >> p) / m;
+	if (cmp->common.features & CCU_FEATURE_FIXED_POSTDIV)
+		rate /= cmp->fixed_post_div;
+
+	return rate;
 }
 
 static int ccu_mp_determine_rate(struct clk_hw *hw,
@@ -129,6 +141,10 @@ static int ccu_mp_set_rate(struct clk_hw *hw, unsigned long rate,
 	max_m = cmp->m.max ?: 1 << cmp->m.width;
 	max_p = cmp->p.max ?: 1 << ((1 << cmp->p.width) - 1);
 
+	/* Adjust target rate according to post-dividers */
+	if (cmp->common.features & CCU_FEATURE_FIXED_POSTDIV)
+		rate = rate * cmp->fixed_post_div;
+
 	ccu_mp_find_best(parent_rate, rate, max_m, max_p, &m, &p);
 
 	spin_lock_irqsave(cmp->common.lock, flags);

drivers/clk/sunxi-ng/ccu_mp.h

@@ -33,9 +33,33 @@ struct ccu_mp {
 	struct ccu_div_internal		m;
 	struct ccu_div_internal		p;
 	struct ccu_mux_internal	mux;
+
+	unsigned int		fixed_post_div;
+
 	struct ccu_common	common;
 };
 
+#define SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(_struct, _name, _parents, _reg, \
+					   _mshift, _mwidth,		\
+					   _pshift, _pwidth,		\
+					   _muxshift, _muxwidth,	\
+					   _gate, _postdiv, _flags)	\
+	struct ccu_mp _struct = {					\
+		.enable	= _gate,					\
+		.m	= _SUNXI_CCU_DIV(_mshift, _mwidth),		\
+		.p	= _SUNXI_CCU_DIV(_pshift, _pwidth),		\
+		.mux	= _SUNXI_CCU_MUX(_muxshift, _muxwidth),		\
+		.fixed_post_div	= _postdiv,				\
+		.common	= {						\
+			.reg		= _reg,				\
+			.features	= CCU_FEATURE_FIXED_POSTDIV,	\
+			.hw.init	= CLK_HW_INIT_PARENTS(_name,	\
+							      _parents, \
+							      &ccu_mp_ops, \
+							      _flags),	\
+		}							\
+	}
+
 #define SUNXI_CCU_MP_WITH_MUX_GATE(_struct, _name, _parents, _reg,	\
 				   _mshift, _mwidth,			\
 				   _pshift, _pwidth,			\

drivers/clk/sunxi-ng/ccu_nm.c

@@ -70,11 +70,18 @@ static unsigned long ccu_nm_recalc_rate(struct clk_hw *hw,
 					unsigned long parent_rate)
 {
 	struct ccu_nm *nm = hw_to_ccu_nm(hw);
+	unsigned long rate;
 	unsigned long n, m;
 	u32 reg;
 
-	if (ccu_frac_helper_is_enabled(&nm->common, &nm->frac))
-		return ccu_frac_helper_read_rate(&nm->common, &nm->frac);
+	if (ccu_frac_helper_is_enabled(&nm->common, &nm->frac)) {
+		rate = ccu_frac_helper_read_rate(&nm->common, &nm->frac);
+
+		if (nm->common.features & CCU_FEATURE_FIXED_POSTDIV)
+			rate /= nm->fixed_post_div;
+
+		return rate;
+	}
 
 	reg = readl(nm->common.base + nm->common.reg);
 
@@ -90,15 +97,15 @@ static unsigned long ccu_nm_recalc_rate(struct clk_hw *hw,
 	if (!m)
 		m++;
 
-	if (ccu_sdm_helper_is_enabled(&nm->common, &nm->sdm)) {
-		unsigned long rate =
-			ccu_sdm_helper_read_rate(&nm->common, &nm->sdm,
-						 m, n);
-		if (rate)
-			return rate;
-	}
+	if (ccu_sdm_helper_is_enabled(&nm->common, &nm->sdm))
+		rate = ccu_sdm_helper_read_rate(&nm->common, &nm->sdm, m, n);
+	else
+		rate = parent_rate * n / m;
+
+	if (nm->common.features & CCU_FEATURE_FIXED_POSTDIV)
+		rate /= nm->fixed_post_div;
 
-	return parent_rate * n / m;
+	return rate;
 }
 
 static long ccu_nm_round_rate(struct clk_hw *hw, unsigned long rate,
@@ -107,11 +114,20 @@ static long ccu_nm_round_rate(struct clk_hw *hw, unsigned long rate,
 	struct ccu_nm *nm = hw_to_ccu_nm(hw);
 	struct _ccu_nm _nm;
 
-	if (ccu_frac_helper_has_rate(&nm->common, &nm->frac, rate))
+	if (nm->common.features & CCU_FEATURE_FIXED_POSTDIV)
+		rate *= nm->fixed_post_div;
+
+	if (ccu_frac_helper_has_rate(&nm->common, &nm->frac, rate)) {
+		if (nm->common.features & CCU_FEATURE_FIXED_POSTDIV)
+			rate /= nm->fixed_post_div;
 		return rate;
+	}
 
-	if (ccu_sdm_helper_has_rate(&nm->common, &nm->sdm, rate))
+	if (ccu_sdm_helper_has_rate(&nm->common, &nm->sdm, rate)) {
+		if (nm->common.features & CCU_FEATURE_FIXED_POSTDIV)
+			rate /= nm->fixed_post_div;
 		return rate;
+	}
 
 	_nm.min_n = nm->n.min ?: 1;
 	_nm.max_n = nm->n.max ?: 1 << nm->n.width;
@@ -119,8 +135,12 @@ static long ccu_nm_round_rate(struct clk_hw *hw, unsigned long rate,
 	_nm.max_m = nm->m.max ?: 1 << nm->m.width;
 
 	ccu_nm_find_best(*parent_rate, rate, &_nm);
+	rate = *parent_rate * _nm.n / _nm.m;
+
+	if (nm->common.features & CCU_FEATURE_FIXED_POSTDIV)
+		rate /= nm->fixed_post_div;
 
-	return *parent_rate * _nm.n / _nm.m;
+	return rate;
 }
 
 static int ccu_nm_set_rate(struct clk_hw *hw, unsigned long rate,
@@ -131,6 +151,10 @@ static int ccu_nm_set_rate(struct clk_hw *hw, unsigned long rate,
 	unsigned long flags;
 	u32 reg;
 
+	/* Adjust target rate according to post-dividers */
+	if (nm->common.features & CCU_FEATURE_FIXED_POSTDIV)
+		rate = rate * nm->fixed_post_div;
+
 	if (ccu_frac_helper_has_rate(&nm->common, &nm->frac, rate)) {
 		spin_lock_irqsave(nm->common.lock, flags);
 

drivers/clk/sunxi-ng/ccu_nm.h

@@ -36,6 +36,8 @@ struct ccu_nm {
 	struct ccu_frac_internal	frac;
 	struct ccu_sdm_internal		sdm;
 
+	unsigned int		fixed_post_div;
+
 	struct ccu_common	common;
 };
 

drivers/clk/sunxi/clk-sun8i-apb0.c

@@ -98,10 +98,7 @@ static int sun8i_a23_apb0_clk_probe(struct platform_device *pdev)
 		return PTR_ERR(reg);
 
 	clk = sun8i_a23_apb0_register(np, reg);
-	if (IS_ERR(clk))
-		return PTR_ERR(clk);
-
-	return 0;
+	return PTR_ERR_OR_ZERO(clk);
 }
 
 static const struct of_device_id sun8i_a23_apb0_clk_dt_ids[] = {

include/dt-bindings/clock/aspeed-clock.h

+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+
+#ifndef DT_BINDINGS_ASPEED_CLOCK_H
+#define DT_BINDINGS_ASPEED_CLOCK_H
+
+#define ASPEED_CLK_GATE_ECLK		0
+#define ASPEED_CLK_GATE_GCLK		1
+#define ASPEED_CLK_GATE_MCLK		2
+#define ASPEED_CLK_GATE_VCLK		3
+#define ASPEED_CLK_GATE_BCLK		4
+#define ASPEED_CLK_GATE_DCLK		5
+#define ASPEED_CLK_GATE_REFCLK		6
+#define ASPEED_CLK_GATE_USBPORT2CLK	7
+#define ASPEED_CLK_GATE_LCLK		8
+#define ASPEED_CLK_GATE_USBUHCICLK	9
+#define ASPEED_CLK_GATE_D1CLK		10
+#define ASPEED_CLK_GATE_YCLK		11
+#define ASPEED_CLK_GATE_USBPORT1CLK	12
+#define ASPEED_CLK_GATE_UART1CLK	13
+#define ASPEED_CLK_GATE_UART2CLK	14
+#define ASPEED_CLK_GATE_UART5CLK	15
+#define ASPEED_CLK_GATE_ESPICLK		16
+#define ASPEED_CLK_GATE_MAC1CLK		17
+#define ASPEED_CLK_GATE_MAC2CLK		18
+#define ASPEED_CLK_GATE_RSACLK		19
+#define ASPEED_CLK_GATE_UART3CLK	20
+#define ASPEED_CLK_GATE_UART4CLK	21
+#define ASPEED_CLK_GATE_SDCLKCLK	22
+#define ASPEED_CLK_GATE_LHCCLK		23
+#define ASPEED_CLK_HPLL			24
+#define ASPEED_CLK_AHB			25
+#define ASPEED_CLK_APB			26
+#define ASPEED_CLK_UART			27
+#define ASPEED_CLK_SDIO			28
+#define ASPEED_CLK_ECLK			29
+#define ASPEED_CLK_ECLK_MUX		30
+#define ASPEED_CLK_LHCLK		31
+#define ASPEED_CLK_MAC			32
+#define ASPEED_CLK_BCLK			33
+#define ASPEED_CLK_MPLL			34
+
+#define ASPEED_RESET_XDMA		0
+#define ASPEED_RESET_MCTP		1
+#define ASPEED_RESET_ADC		2
+#define ASPEED_RESET_JTAG_MASTER	3
+#define ASPEED_RESET_MIC		4
+#define ASPEED_RESET_PWM		5
+#define ASPEED_RESET_PCIVGA		6
+#define ASPEED_RESET_I2C		7
+#define ASPEED_RESET_AHB		8
+
+#endif