ARM: dts: marvell: add missing space before {

Add missing whitespace between node name/label and opening {.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

arch/arm/boot/dts/marvell/armada-382-rd-ac3x-48g4x2xl.dts

@@ -40,7 +40,7 @@ &i2c0 {
 	pinctrl-0 = <&i2c0_pins>;
 	status = "okay";
 
-	eeprom@53{
+	eeprom@53 {
 		compatible = "atmel,24c64";
 		reg = <0x53>;
 	};
@@ -95,11 +95,11 @@ partition@0 {
 				reg = <0x00000000 0x00500000>;
 				label = "u-boot";
 			};
-			partition@500000{
+			partition@500000 {
 				reg = <0x00500000 0x00400000>;
 				label = "u-boot env";
 			};
-			partition@900000{
+			partition@900000 {
 				reg = <0x00900000 0x3F700000>;
 				label = "user";
 			};

arch/arm/boot/dts/marvell/kirkwood-l-50.dts

@@ -62,7 +62,7 @@ i2c@11000 {
 			status = "okay";
 			clock-frequency = <400000>;
 
-			gpio2: gpio-expander@20{
+			gpio2: gpio-expander@20 {
 				#gpio-cells = <2>;
 				#interrupt-cells = <2>;
 				compatible = "semtech,sx1505q";
@@ -76,7 +76,7 @@ gpio2: gpio-expander@20{
 			 * 5: mPCIE reset (active low)
 			 * 6: Express card reset (active low)
 			 */
-			gpio3: gpio-expander@21{
+			gpio3: gpio-expander@21 {
 				#gpio-cells = <2>;
 				#interrupt-cells = <2>;
 				compatible = "semtech,sx1505q";

arch/arm/boot/dts/marvell/pxa168.dtsi

@@ -153,7 +153,7 @@ rtc: rtc@d4010000 {
 			};
 		};
 
-		soc_clocks: clocks{
+		soc_clocks: clocks {
 			compatible = "marvell,pxa168-clock";
 			reg = <0xd4050000 0x1000>,
 			      <0xd4282800 0x400>,

arch/arm/boot/dts/marvell/pxa910.dtsi

@@ -163,7 +163,7 @@ rtc: rtc@d4010000 {
 			};
 		};
 
-		soc_clocks: clocks{
+		soc_clocks: clocks {
 			compatible = "marvell,pxa910-clock";
 			reg = <0xd4050000 0x1000>,
 			      <0xd4282800 0x400>,