clk: qcom: support for alpha mode configuration

The current configuration does not fully configure PLL alpha mode
and values so this patch

1. Configures PLL_ALPHA_VAL_U for PLL which supports 40 bit alpha.
2. Adds alpha enable and alpha mode configuration support.
Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

drivers/clk/qcom/clk-alpha-pll.c

@@ -143,6 +143,9 @@ void clk_alpha_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
 		regmap_write(regmap, PLL_CONFIG_CTL_U(pll),
 			     config->config_ctl_hi_val);
 
+	if (pll_alpha_width(pll) > 32)
+		regmap_write(regmap, PLL_ALPHA_VAL_U(pll), config->alpha_hi);
+
 	val = config->main_output_mask;
 	val |= config->aux_output_mask;
 	val |= config->aux2_output_mask;
@@ -150,6 +153,8 @@ void clk_alpha_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
 	val |= config->pre_div_val;
 	val |= config->post_div_val;
 	val |= config->vco_val;
+	val |= config->alpha_en_mask;
+	val |= config->alpha_mode_mask;
 
 	mask = config->main_output_mask;
 	mask |= config->aux_output_mask;

drivers/clk/qcom/clk-alpha-pll.h

@@ -83,12 +83,15 @@ struct clk_alpha_pll_postdiv {
 struct alpha_pll_config {
 	u32 l;
 	u32 alpha;
+	u32 alpha_hi;
 	u32 config_ctl_val;
 	u32 config_ctl_hi_val;
 	u32 main_output_mask;
 	u32 aux_output_mask;
 	u32 aux2_output_mask;
 	u32 early_output_mask;
+	u32 alpha_en_mask;
+	u32 alpha_mode_mask;
 	u32 pre_div_val;
 	u32 pre_div_mask;
 	u32 post_div_val;