tg3: Download 57766 EEE service patch firmware

This patch downloads the EEE service patch firmware and enables the necessary
EEE flags.
Reviewed-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/broadcom/tg3.c

@@ -212,6 +212,7 @@ static inline void _tg3_flag_clear(enum TG3_FLAGS flag, unsigned long *bits)
 #define TG3_FW_UPDATE_FREQ_SEC		(TG3_FW_UPDATE_TIMEOUT_SEC / 2)
 
 #define FIRMWARE_TG3		"tigon/tg3.bin"
+#define FIRMWARE_TG357766	"tigon/tg357766.bin"
 #define FIRMWARE_TG3TSO		"tigon/tg3_tso.bin"
 #define FIRMWARE_TG3TSO5	"tigon/tg3_tso5.bin"
 
@@ -3568,7 +3569,7 @@ static int tg3_load_firmware_cpu(struct tg3 *tp, u32 cpu_base,
 				 u32 cpu_scratch_base, int cpu_scratch_size,
 				 const struct tg3_firmware_hdr *fw_hdr)
 {
-	int err, lock_err, i;
+	int err, i;
 	void (*write_op)(struct tg3 *, u32, u32);
 	int total_len = tp->fw->size;
 
@@ -3579,15 +3580,16 @@ static int tg3_load_firmware_cpu(struct tg3 *tp, u32 cpu_base,
 		return -EINVAL;
 	}
 
-	if (tg3_flag(tp, 5705_PLUS))
+	if (tg3_flag(tp, 5705_PLUS) && tg3_asic_rev(tp) != ASIC_REV_57766)
 		write_op = tg3_write_mem;
 	else
 		write_op = tg3_write_indirect_reg32;
 
+	if (tg3_asic_rev(tp) != ASIC_REV_57766) {
 		/* It is possible that bootcode is still loading at this point.
 		 * Get the nvram lock first before halting the cpu.
 		 */
-	lock_err = tg3_nvram_lock(tp);
+		int lock_err = tg3_nvram_lock(tp);
 		err = tg3_halt_cpu(tp, cpu_base);
 		if (!lock_err)
 			tg3_nvram_unlock(tp);
@@ -3597,7 +3599,15 @@ static int tg3_load_firmware_cpu(struct tg3 *tp, u32 cpu_base,
 		for (i = 0; i < cpu_scratch_size; i += sizeof(u32))
 			write_op(tp, cpu_scratch_base + i, 0);
 		tw32(cpu_base + CPU_STATE, 0xffffffff);
-	tw32(cpu_base + CPU_MODE, tr32(cpu_base+CPU_MODE)|CPU_MODE_HALT);
+		tw32(cpu_base + CPU_MODE,
+		     tr32(cpu_base + CPU_MODE) | CPU_MODE_HALT);
+	} else {
+		/* Subtract additional main header for fragmented firmware and
+		 * advance to the first fragment
+		 */
+		total_len -= TG3_FW_HDR_LEN;
+		fw_hdr++;
+	}
 
 	do {
 		u32 *fw_data = (u32 *)(fw_hdr + 1);
@@ -3683,6 +3693,78 @@ static int tg3_load_5701_a0_firmware_fix(struct tg3 *tp)
 	return 0;
 }
 
+static int tg3_validate_rxcpu_state(struct tg3 *tp)
+{
+	const int iters = 1000;
+	int i;
+	u32 val;
+
+	/* Wait for boot code to complete initialization and enter service
+	 * loop. It is then safe to download service patches
+	 */
+	for (i = 0; i < iters; i++) {
+		if (tr32(RX_CPU_HWBKPT) == TG3_SBROM_IN_SERVICE_LOOP)
+			break;
+
+		udelay(10);
+	}
+
+	if (i == iters) {
+		netdev_err(tp->dev, "Boot code not ready for service patches\n");
+		return -EBUSY;
+	}
+
+	val = tg3_read_indirect_reg32(tp, TG3_57766_FW_HANDSHAKE);
+	if (val & 0xff) {
+		netdev_warn(tp->dev,
+			    "Other patches exist. Not downloading EEE patch\n");
+		return -EEXIST;
+	}
+
+	return 0;
+}
+
+/* tp->lock is held. */
+static void tg3_load_57766_firmware(struct tg3 *tp)
+{
+	struct tg3_firmware_hdr *fw_hdr;
+
+	if (!tg3_flag(tp, NO_NVRAM))
+		return;
+
+	if (tg3_validate_rxcpu_state(tp))
+		return;
+
+	if (!tp->fw)
+		return;
+
+	/* This firmware blob has a different format than older firmware
+	 * releases as given below. The main difference is we have fragmented
+	 * data to be written to non-contiguous locations.
+	 *
+	 * In the beginning we have a firmware header identical to other
+	 * firmware which consists of version, base addr and length. The length
+	 * here is unused and set to 0xffffffff.
+	 *
+	 * This is followed by a series of firmware fragments which are
+	 * individually identical to previous firmware. i.e. they have the
+	 * firmware header and followed by data for that fragment. The version
+	 * field of the individual fragment header is unused.
+	 */
+
+	fw_hdr = (struct tg3_firmware_hdr *)tp->fw->data;
+	if (be32_to_cpu(fw_hdr->base_addr) != TG3_57766_FW_BASE_ADDR)
+		return;
+
+	if (tg3_rxcpu_pause(tp))
+		return;
+
+	/* tg3_load_firmware_cpu() will always succeed for the 57766 */
+	tg3_load_firmware_cpu(tp, 0, TG3_57766_FW_BASE_ADDR, 0, fw_hdr);
+
+	tg3_rxcpu_resume(tp);
+}
+
 /* tp->lock is held. */
 static int tg3_load_tso_firmware(struct tg3 *tp)
 {
@@ -9836,6 +9918,13 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 			return err;
 	}
 
+	if (tg3_asic_rev(tp) == ASIC_REV_57766) {
+		/* Ignore any errors for the firmware download. If download
+		 * fails, the device will operate with EEE disabled
+		 */
+		tg3_load_57766_firmware(tp);
+	}
+
 	if (tg3_flag(tp, TSO_CAPABLE)) {
 		err = tg3_load_tso_firmware(tp);
 		if (err)
@@ -10940,7 +11029,15 @@ static int tg3_open(struct net_device *dev)
 
 	if (tp->fw_needed) {
 		err = tg3_request_firmware(tp);
-		if (tg3_chip_rev_id(tp) == CHIPREV_ID_5701_A0) {
+		if (tg3_asic_rev(tp) == ASIC_REV_57766) {
+			if (err) {
+				netdev_warn(tp->dev, "EEE capability disabled\n");
+				tp->phy_flags &= ~TG3_PHYFLG_EEE_CAP;
+			} else if (!(tp->phy_flags & TG3_PHYFLG_EEE_CAP)) {
+				netdev_warn(tp->dev, "EEE capability restored\n");
+				tp->phy_flags |= TG3_PHYFLG_EEE_CAP;
+			}
+		} else if (tg3_chip_rev_id(tp) == CHIPREV_ID_5701_A0) {
 			if (err)
 				return err;
 		} else if (err) {
@@ -14570,6 +14667,7 @@ static int tg3_phy_probe(struct tg3 *tp)
 	if (!(tp->phy_flags & TG3_PHYFLG_ANY_SERDES) &&
 	    (tg3_asic_rev(tp) == ASIC_REV_5719 ||
 	     tg3_asic_rev(tp) == ASIC_REV_5720 ||
+	     tg3_asic_rev(tp) == ASIC_REV_57766 ||
 	     tg3_asic_rev(tp) == ASIC_REV_5762 ||
 	     (tg3_asic_rev(tp) == ASIC_REV_5717 &&
 	      tg3_chip_rev_id(tp) != CHIPREV_ID_5717_A0) ||
@@ -15379,6 +15477,9 @@ static int tg3_get_invariants(struct tg3 *tp, const struct pci_device_id *ent)
 	if (tg3_chip_rev_id(tp) == CHIPREV_ID_5701_A0)
 		tp->fw_needed = FIRMWARE_TG3;
 
+	if (tg3_asic_rev(tp) == ASIC_REV_57766)
+		tp->fw_needed = FIRMWARE_TG357766;
+
 	tp->irq_max = 1;
 
 	if (tg3_flag(tp, 5750_PLUS)) {
@@ -15839,6 +15940,11 @@ static int tg3_get_invariants(struct tg3 *tp, const struct pci_device_id *ent)
 	udelay(50);
 	tg3_nvram_init(tp);
 
+	/* If the device has an NVRAM, no need to load patch firmware */
+	if (tg3_asic_rev(tp) == ASIC_REV_57766 &&
+	    !tg3_flag(tp, NO_NVRAM))
+		tp->fw_needed = NULL;
+
 	grc_misc_cfg = tr32(GRC_MISC_CFG);
 	grc_misc_cfg &= GRC_MISC_CFG_BOARD_ID_MASK;
 

drivers/net/ethernet/broadcom/tg3.h

@@ -2222,6 +2222,12 @@
 #define  NIC_SRAM_MBUF_POOL_BASE5705	0x00010000
 #define  NIC_SRAM_MBUF_POOL_SIZE5705	0x0000e000
 
+#define TG3_SRAM_RXCPU_SCRATCH_BASE_57766	0x00030000
+#define  TG3_SRAM_RXCPU_SCRATCH_SIZE_57766	 0x00010000
+#define TG3_57766_FW_BASE_ADDR			0x00030000
+#define TG3_57766_FW_HANDSHAKE			0x0003fccc
+#define TG3_SBROM_IN_SERVICE_LOOP		0x51
+
 #define TG3_SRAM_RX_STD_BDCACHE_SIZE_5700	128
 #define TG3_SRAM_RX_STD_BDCACHE_SIZE_5755	64
 #define TG3_SRAM_RX_STD_BDCACHE_SIZE_5906	32