Commit c52fd05a authored by David S. Miller's avatar David S. Miller

Merge tag 'wireless-drivers-next-for-davem-2015-11-25' of...

Merge tag 'wireless-drivers-next-for-davem-2015-11-25' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
Add vendor directories (for example intel, marvell and so on) to
drivers/net/wireless and change the menuconfig to follow the same
categorisation. This unifies the directory layout as we already had few drivers
already using vendor directories (especially ath and ti).
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents 00cc3679 6d808eba
...@@ -388,7 +388,7 @@ ADM8211 WIRELESS DRIVER ...@@ -388,7 +388,7 @@ ADM8211 WIRELESS DRIVER
L: linux-wireless@vger.kernel.org L: linux-wireless@vger.kernel.org
W: http://wireless.kernel.org/ W: http://wireless.kernel.org/
S: Orphan S: Orphan
F: drivers/net/wireless/adm8211.* F: drivers/net/wireless/admtek/adm8211.*
ADP1653 FLASH CONTROLLER DRIVER ADP1653 FLASH CONTROLLER DRIVER
M: Sakari Ailus <sakari.ailus@iki.fi> M: Sakari Ailus <sakari.ailus@iki.fi>
...@@ -1992,7 +1992,7 @@ L: linux-wireless@vger.kernel.org ...@@ -1992,7 +1992,7 @@ L: linux-wireless@vger.kernel.org
W: http://www.thekelleys.org.uk/atmel W: http://www.thekelleys.org.uk/atmel
W: http://atmelwlandriver.sourceforge.net/ W: http://atmelwlandriver.sourceforge.net/
S: Maintained S: Maintained
F: drivers/net/wireless/atmel* F: drivers/net/wireless/atmel/atmel*
ATMEL MAXTOUCH DRIVER ATMEL MAXTOUCH DRIVER
M: Nick Dyer <nick.dyer@itdev.co.uk> M: Nick Dyer <nick.dyer@itdev.co.uk>
...@@ -2081,7 +2081,7 @@ L: linux-wireless@vger.kernel.org ...@@ -2081,7 +2081,7 @@ L: linux-wireless@vger.kernel.org
L: b43-dev@lists.infradead.org L: b43-dev@lists.infradead.org
W: http://wireless.kernel.org/en/users/Drivers/b43 W: http://wireless.kernel.org/en/users/Drivers/b43
S: Odd Fixes S: Odd Fixes
F: drivers/net/wireless/b43/ F: drivers/net/wireless/broadcom/b43/
B43LEGACY WIRELESS DRIVER B43LEGACY WIRELESS DRIVER
M: Larry Finger <Larry.Finger@lwfinger.net> M: Larry Finger <Larry.Finger@lwfinger.net>
...@@ -2089,7 +2089,7 @@ L: linux-wireless@vger.kernel.org ...@@ -2089,7 +2089,7 @@ L: linux-wireless@vger.kernel.org
L: b43-dev@lists.infradead.org L: b43-dev@lists.infradead.org
W: http://wireless.kernel.org/en/users/Drivers/b43 W: http://wireless.kernel.org/en/users/Drivers/b43
S: Maintained S: Maintained
F: drivers/net/wireless/b43legacy/ F: drivers/net/wireless/broadcom/b43legacy/
BACKLIGHT CLASS/SUBSYSTEM BACKLIGHT CLASS/SUBSYSTEM
M: Jingoo Han <jingoohan1@gmail.com> M: Jingoo Han <jingoohan1@gmail.com>
...@@ -2391,7 +2391,7 @@ M: Hante Meuleman <meuleman@broadcom.com> ...@@ -2391,7 +2391,7 @@ M: Hante Meuleman <meuleman@broadcom.com>
L: linux-wireless@vger.kernel.org L: linux-wireless@vger.kernel.org
L: brcm80211-dev-list@broadcom.com L: brcm80211-dev-list@broadcom.com
S: Supported S: Supported
F: drivers/net/wireless/brcm80211/ F: drivers/net/wireless/broadcom/brcm80211/
BROADCOM BNX2FC 10 GIGABIT FCOE DRIVER BROADCOM BNX2FC 10 GIGABIT FCOE DRIVER
M: QLogic-Storage-Upstream@qlogic.com M: QLogic-Storage-Upstream@qlogic.com
...@@ -3101,7 +3101,7 @@ F: sound/pci/cs5535audio/ ...@@ -3101,7 +3101,7 @@ F: sound/pci/cs5535audio/
CW1200 WLAN driver CW1200 WLAN driver
M: Solomon Peachy <pizza@shaftnet.org> M: Solomon Peachy <pizza@shaftnet.org>
S: Maintained S: Maintained
F: drivers/net/wireless/cw1200/ F: drivers/net/wireless/st/cw1200/
CX18 VIDEO4LINUX DRIVER CX18 VIDEO4LINUX DRIVER
M: Andy Walls <awalls@md.metrocast.net> M: Andy Walls <awalls@md.metrocast.net>
...@@ -5041,7 +5041,7 @@ L: hostap@shmoo.com (subscribers-only) ...@@ -5041,7 +5041,7 @@ L: hostap@shmoo.com (subscribers-only)
L: linux-wireless@vger.kernel.org L: linux-wireless@vger.kernel.org
W: http://hostap.epitest.fi/ W: http://hostap.epitest.fi/
S: Maintained S: Maintained
F: drivers/net/wireless/hostap/ F: drivers/net/wireless/intersil/hostap/
HP COMPAQ TC1100 TABLET WMI EXTRAS DRIVER HP COMPAQ TC1100 TABLET WMI EXTRAS DRIVER
L: platform-driver-x86@vger.kernel.org L: platform-driver-x86@vger.kernel.org
...@@ -5609,7 +5609,7 @@ L: linux-wireless@vger.kernel.org ...@@ -5609,7 +5609,7 @@ L: linux-wireless@vger.kernel.org
S: Maintained S: Maintained
F: Documentation/networking/README.ipw2100 F: Documentation/networking/README.ipw2100
F: Documentation/networking/README.ipw2200 F: Documentation/networking/README.ipw2200
F: drivers/net/wireless/ipw2x00/ F: drivers/net/wireless/intel/ipw2x00/
INTEL(R) TRACE HUB INTEL(R) TRACE HUB
M: Alexander Shishkin <alexander.shishkin@linux.intel.com> M: Alexander Shishkin <alexander.shishkin@linux.intel.com>
...@@ -5643,7 +5643,7 @@ INTEL WIRELESS 3945ABG/BG, 4965AGN (iwlegacy) ...@@ -5643,7 +5643,7 @@ INTEL WIRELESS 3945ABG/BG, 4965AGN (iwlegacy)
M: Stanislaw Gruszka <sgruszka@redhat.com> M: Stanislaw Gruszka <sgruszka@redhat.com>
L: linux-wireless@vger.kernel.org L: linux-wireless@vger.kernel.org
S: Supported S: Supported
F: drivers/net/wireless/iwlegacy/ F: drivers/net/wireless/intel/iwlegacy/
INTEL WIRELESS WIFI LINK (iwlwifi) INTEL WIRELESS WIFI LINK (iwlwifi)
M: Johannes Berg <johannes.berg@intel.com> M: Johannes Berg <johannes.berg@intel.com>
...@@ -5653,7 +5653,7 @@ L: linux-wireless@vger.kernel.org ...@@ -5653,7 +5653,7 @@ L: linux-wireless@vger.kernel.org
W: http://intellinuxwireless.org W: http://intellinuxwireless.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi.git T: git git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi.git
S: Supported S: Supported
F: drivers/net/wireless/iwlwifi/ F: drivers/net/wireless/intel/iwlwifi/
INTEL MANAGEMENT ENGINE (mei) INTEL MANAGEMENT ENGINE (mei)
M: Tomas Winkler <tomas.winkler@intel.com> M: Tomas Winkler <tomas.winkler@intel.com>
...@@ -6703,7 +6703,7 @@ F: drivers/net/ethernet/marvell/sk* ...@@ -6703,7 +6703,7 @@ F: drivers/net/ethernet/marvell/sk*
MARVELL LIBERTAS WIRELESS DRIVER MARVELL LIBERTAS WIRELESS DRIVER
L: libertas-dev@lists.infradead.org L: libertas-dev@lists.infradead.org
S: Orphan S: Orphan
F: drivers/net/wireless/libertas/ F: drivers/net/wireless/marvell/libertas/
MARVELL MV643XX ETHERNET DRIVER MARVELL MV643XX ETHERNET DRIVER
M: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> M: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
...@@ -6723,13 +6723,13 @@ M: Amitkumar Karwar <akarwar@marvell.com> ...@@ -6723,13 +6723,13 @@ M: Amitkumar Karwar <akarwar@marvell.com>
M: Nishant Sarmukadam <nishants@marvell.com> M: Nishant Sarmukadam <nishants@marvell.com>
L: linux-wireless@vger.kernel.org L: linux-wireless@vger.kernel.org
S: Maintained S: Maintained
F: drivers/net/wireless/mwifiex/ F: drivers/net/wireless/marvell/mwifiex/
MARVELL MWL8K WIRELESS DRIVER MARVELL MWL8K WIRELESS DRIVER
M: Lennert Buytenhek <buytenh@wantstofly.org> M: Lennert Buytenhek <buytenh@wantstofly.org>
L: linux-wireless@vger.kernel.org L: linux-wireless@vger.kernel.org
S: Odd Fixes S: Odd Fixes
F: drivers/net/wireless/mwl8k.c F: drivers/net/wireless/marvell/mwl8k.c
MARVELL SOC MMC/SD/SDIO CONTROLLER DRIVER MARVELL SOC MMC/SD/SDIO CONTROLLER DRIVER
M: Nicolas Pitre <nico@fluxnic.net> M: Nicolas Pitre <nico@fluxnic.net>
...@@ -7933,7 +7933,7 @@ L: linux-wireless@vger.kernel.org ...@@ -7933,7 +7933,7 @@ L: linux-wireless@vger.kernel.org
W: http://wireless.kernel.org/en/users/Drivers/orinoco W: http://wireless.kernel.org/en/users/Drivers/orinoco
W: http://www.nongnu.org/orinoco/ W: http://www.nongnu.org/orinoco/
S: Orphan S: Orphan
F: drivers/net/wireless/orinoco/ F: drivers/net/wireless/intersil/orinoco/
OSD LIBRARY and FILESYSTEM OSD LIBRARY and FILESYSTEM
M: Boaz Harrosh <ooo@electrozaur.com> M: Boaz Harrosh <ooo@electrozaur.com>
...@@ -7959,7 +7959,7 @@ M: Christian Lamparter <chunkeey@googlemail.com> ...@@ -7959,7 +7959,7 @@ M: Christian Lamparter <chunkeey@googlemail.com>
L: linux-wireless@vger.kernel.org L: linux-wireless@vger.kernel.org
W: http://wireless.kernel.org/en/users/Drivers/p54 W: http://wireless.kernel.org/en/users/Drivers/p54
S: Maintained S: Maintained
F: drivers/net/wireless/p54/ F: drivers/net/wireless/intersil/p54/
PA SEMI ETHERNET DRIVER PA SEMI ETHERNET DRIVER
M: Olof Johansson <olof@lixom.net> M: Olof Johansson <olof@lixom.net>
...@@ -8501,7 +8501,7 @@ M: "Luis R. Rodriguez" <mcgrof@gmail.com> ...@@ -8501,7 +8501,7 @@ M: "Luis R. Rodriguez" <mcgrof@gmail.com>
L: linux-wireless@vger.kernel.org L: linux-wireless@vger.kernel.org
W: http://wireless.kernel.org/en/users/Drivers/p54 W: http://wireless.kernel.org/en/users/Drivers/p54
S: Obsolete S: Obsolete
F: drivers/net/wireless/prism54/ F: drivers/net/wireless/intersil/prism54/
PS3 NETWORK SUPPORT PS3 NETWORK SUPPORT
M: Geoff Levand <geoff@infradead.org> M: Geoff Levand <geoff@infradead.org>
...@@ -8804,7 +8804,7 @@ M: Stanislaw Gruszka <sgruszka@redhat.com> ...@@ -8804,7 +8804,7 @@ M: Stanislaw Gruszka <sgruszka@redhat.com>
M: Helmut Schaa <helmut.schaa@googlemail.com> M: Helmut Schaa <helmut.schaa@googlemail.com>
L: linux-wireless@vger.kernel.org L: linux-wireless@vger.kernel.org
S: Maintained S: Maintained
F: drivers/net/wireless/rt2x00/ F: drivers/net/wireless/ralink/rt2x00/
RAMDISK RAM BLOCK DEVICE DRIVER RAMDISK RAM BLOCK DEVICE DRIVER
M: Jens Axboe <axboe@kernel.dk> M: Jens Axboe <axboe@kernel.dk>
...@@ -9038,7 +9038,7 @@ L: linux-wireless@vger.kernel.org ...@@ -9038,7 +9038,7 @@ L: linux-wireless@vger.kernel.org
W: http://wireless.kernel.org/ W: http://wireless.kernel.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
S: Orphan S: Orphan
F: drivers/net/wireless/rtl818x/rtl8180/ F: drivers/net/wireless/realtek/rtl818x/rtl8180/
RTL8187 WIRELESS DRIVER RTL8187 WIRELESS DRIVER
M: Herton Ronaldo Krzesinski <herton@canonical.com> M: Herton Ronaldo Krzesinski <herton@canonical.com>
...@@ -9048,7 +9048,7 @@ L: linux-wireless@vger.kernel.org ...@@ -9048,7 +9048,7 @@ L: linux-wireless@vger.kernel.org
W: http://wireless.kernel.org/ W: http://wireless.kernel.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
S: Maintained S: Maintained
F: drivers/net/wireless/rtl818x/rtl8187/ F: drivers/net/wireless/realtek/rtl818x/rtl8187/
RTL8192CE WIRELESS DRIVER RTL8192CE WIRELESS DRIVER
M: Larry Finger <Larry.Finger@lwfinger.net> M: Larry Finger <Larry.Finger@lwfinger.net>
...@@ -9057,8 +9057,8 @@ L: linux-wireless@vger.kernel.org ...@@ -9057,8 +9057,8 @@ L: linux-wireless@vger.kernel.org
W: http://wireless.kernel.org/ W: http://wireless.kernel.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
S: Maintained S: Maintained
F: drivers/net/wireless/rtlwifi/ F: drivers/net/wireless/realtek/rtlwifi/
F: drivers/net/wireless/rtlwifi/rtl8192ce/ F: drivers/net/wireless/realtek/rtlwifi/rtl8192ce/
RTL8XXXU WIRELESS DRIVER (rtl8xxxu) RTL8XXXU WIRELESS DRIVER (rtl8xxxu)
M: Jes Sorensen <Jes.Sorensen@redhat.com> M: Jes Sorensen <Jes.Sorensen@redhat.com>
...@@ -11255,7 +11255,7 @@ USB ZD1201 DRIVER ...@@ -11255,7 +11255,7 @@ USB ZD1201 DRIVER
L: linux-wireless@vger.kernel.org L: linux-wireless@vger.kernel.org
W: http://linux-lc100020.sourceforge.net W: http://linux-lc100020.sourceforge.net
S: Orphan S: Orphan
F: drivers/net/wireless/zd1201.* F: drivers/net/wireless/zydas/zd1201.*
USB ZR364XX DRIVER USB ZR364XX DRIVER
M: Antoine Jacquet <royale@zerezo.com> M: Antoine Jacquet <royale@zerezo.com>
...@@ -11886,7 +11886,7 @@ W: http://zd1211.ath.cx/wiki/DriverRewrite ...@@ -11886,7 +11886,7 @@ W: http://zd1211.ath.cx/wiki/DriverRewrite
L: linux-wireless@vger.kernel.org L: linux-wireless@vger.kernel.org
L: zd1211-devs@lists.sourceforge.net (subscribers-only) L: zd1211-devs@lists.sourceforge.net (subscribers-only)
S: Maintained S: Maintained
F: drivers/net/wireless/zd1211rw/ F: drivers/net/wireless/zydas/zd1211rw/
ZPOOL COMPRESSED PAGE STORAGE API ZPOOL COMPRESSED PAGE STORAGE API
M: Dan Streetman <ddstreet@ieee.org> M: Dan Streetman <ddstreet@ieee.org>
......
...@@ -17,6 +17,22 @@ menuconfig WLAN ...@@ -17,6 +17,22 @@ menuconfig WLAN
if WLAN if WLAN
source "drivers/net/wireless/admtek/Kconfig"
source "drivers/net/wireless/ath/Kconfig"
source "drivers/net/wireless/atmel/Kconfig"
source "drivers/net/wireless/broadcom/Kconfig"
source "drivers/net/wireless/cisco/Kconfig"
source "drivers/net/wireless/intel/Kconfig"
source "drivers/net/wireless/intersil/Kconfig"
source "drivers/net/wireless/marvell/Kconfig"
source "drivers/net/wireless/mediatek/Kconfig"
source "drivers/net/wireless/ralink/Kconfig"
source "drivers/net/wireless/realtek/Kconfig"
source "drivers/net/wireless/rsi/Kconfig"
source "drivers/net/wireless/st/Kconfig"
source "drivers/net/wireless/ti/Kconfig"
source "drivers/net/wireless/zydas/Kconfig"
config PCMCIA_RAYCS config PCMCIA_RAYCS
tristate "Aviator/Raytheon 2.4GHz wireless support" tristate "Aviator/Raytheon 2.4GHz wireless support"
depends on PCMCIA depends on PCMCIA
...@@ -32,110 +48,6 @@ config PCMCIA_RAYCS ...@@ -32,110 +48,6 @@ config PCMCIA_RAYCS
To compile this driver as a module, choose M here: the module will be To compile this driver as a module, choose M here: the module will be
called ray_cs. If unsure, say N. called ray_cs. If unsure, say N.
config LIBERTAS_THINFIRM
tristate "Marvell 8xxx Libertas WLAN driver support with thin firmware"
depends on MAC80211
select FW_LOADER
---help---
A library for Marvell Libertas 8xxx devices using thinfirm.
config LIBERTAS_THINFIRM_DEBUG
bool "Enable full debugging output in the Libertas thin firmware module."
depends on LIBERTAS_THINFIRM
---help---
Debugging support.
config LIBERTAS_THINFIRM_USB
tristate "Marvell Libertas 8388 USB 802.11b/g cards with thin firmware"
depends on LIBERTAS_THINFIRM && USB
---help---
A driver for Marvell Libertas 8388 USB devices using thinfirm.
config AIRO
tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards"
depends on CFG80211 && ISA_DMA_API && (PCI || BROKEN)
select WIRELESS_EXT
select CRYPTO
select WEXT_SPY
select WEXT_PRIV
---help---
This is the standard Linux driver to support Cisco/Aironet ISA and
PCI 802.11 wireless cards.
It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
- with or without encryption) as well as card before the Cisco
acquisition (Aironet 4500, Aironet 4800, Aironet 4800B).
This driver support both the standard Linux Wireless Extensions
and Cisco proprietary API, so both the Linux Wireless Tools and the
Cisco Linux utilities can be used to configure the card.
The driver can be compiled as a module and will be named "airo".
config ATMEL
tristate "Atmel at76c50x chipset 802.11b support"
depends on CFG80211 && (PCI || PCMCIA)
select WIRELESS_EXT
select WEXT_PRIV
select FW_LOADER
select CRC32
---help---
A driver 802.11b wireless cards based on the Atmel fast-vnet
chips. This driver supports standard Linux wireless extensions.
Many cards based on this chipset do not have flash memory
and need their firmware loaded at start-up. If yours is
one of these, you will need to provide a firmware image
to be loaded into the card by the driver. The Atmel
firmware package can be downloaded from
<http://www.thekelleys.org.uk/atmel>
config PCI_ATMEL
tristate "Atmel at76c506 PCI cards"
depends on ATMEL && PCI
---help---
Enable support for PCI and mini-PCI cards containing the
Atmel at76c506 chip.
config PCMCIA_ATMEL
tristate "Atmel at76c502/at76c504 PCMCIA cards"
depends on ATMEL && PCMCIA
select WIRELESS_EXT
select FW_LOADER
select CRC32
---help---
Enable support for PCMCIA cards containing the
Atmel at76c502 and at76c504 chips.
config AT76C50X_USB
tristate "Atmel at76c503/at76c505/at76c505a USB cards"
depends on MAC80211 && USB
select FW_LOADER
---help---
Enable support for USB Wireless devices using Atmel at76c503,
at76c505 or at76c505a chips.
config AIRO_CS
tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
depends on CFG80211 && PCMCIA && (BROKEN || !M32R)
select WIRELESS_EXT
select WEXT_SPY
select WEXT_PRIV
select CRYPTO
select CRYPTO_AES
---help---
This is the standard Linux driver to support Cisco/Aironet PCMCIA
802.11 wireless cards. This driver is the same as the Aironet
driver part of the Linux Pcmcia package.
It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
- with or without encryption) as well as card before the Cisco
acquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also
supports OEM of Cisco such as the DELL TrueMobile 4800 and Xircom
802.11b cards.
This driver support both the standard Linux Wireless Extensions
and Cisco proprietary API, so both the Linux Wireless Tools and the
Cisco Linux utilities can be used to configure the card.
config PCMCIA_WL3501 config PCMCIA_WL3501
tristate "Planet WL3501 PCMCIA cards" tristate "Planet WL3501 PCMCIA cards"
depends on CFG80211 && PCMCIA depends on CFG80211 && PCMCIA
...@@ -146,44 +58,18 @@ config PCMCIA_WL3501 ...@@ -146,44 +58,18 @@ config PCMCIA_WL3501
It has basic support for Linux wireless extensions and initial It has basic support for Linux wireless extensions and initial
micro support for ethtool. micro support for ethtool.
config PRISM54 config MAC80211_HWSIM
tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus (DEPRECATED)' tristate "Simulated radio testing tool for mac80211"
depends on PCI depends on MAC80211
select WIRELESS_EXT
select WEXT_SPY
select WEXT_PRIV
select FW_LOADER
---help---
This enables support for FullMAC PCI/Cardbus prism54 devices. This
driver is now deprecated in favor for the SoftMAC driver, p54pci.
p54pci supports FullMAC PCI/Cardbus devices as well.
For more information refer to the p54 wiki:
http://wireless.kernel.org/en/users/Drivers/p54
Note: You need a motherboard with DMA support to use any of these cards
When built as module you get the module prism54
config USB_ZD1201
tristate "USB ZD1201 based Wireless device support"
depends on CFG80211 && USB
select WIRELESS_EXT
select WEXT_PRIV
select FW_LOADER
---help--- ---help---
Say Y if you want to use wireless LAN adapters based on the ZyDAS This driver is a developer testing tool that can be used to test
ZD1201 chip. IEEE 802.11 networking stack (mac80211) functionality. This is not
needed for normal wireless LAN usage and is only for testing. See
This driver makes the adapter appear as a normal Ethernet interface, Documentation/networking/mac80211_hwsim for more information on how
typically on wlan0. to use this tool.
The zd1201 device requires external firmware to be loaded.
This can be found at http://linux-lc100020.sourceforge.net/
To compile this driver as a module, choose M here: the To compile this driver as a module, choose M here: the module will be
module will be called zd1201. called mac80211_hwsim. If unsure, say N.
config USB_NET_RNDIS_WLAN config USB_NET_RNDIS_WLAN
tristate "Wireless RNDIS USB support" tristate "Wireless RNDIS USB support"
...@@ -214,76 +100,4 @@ config USB_NET_RNDIS_WLAN ...@@ -214,76 +100,4 @@ config USB_NET_RNDIS_WLAN
If you choose to build a module, it'll be called rndis_wlan. If you choose to build a module, it'll be called rndis_wlan.
config ADM8211
tristate "ADMtek ADM8211 support"
depends on MAC80211 && PCI
select CRC32
select EEPROM_93CX6
---help---
This driver is for ADM8211A, ADM8211B, and ADM8211C based cards.
These are PCI/mini-PCI/Cardbus 802.11b chips found in cards such as:
Xterasys Cardbus XN-2411b
Blitz NetWave Point PC
TrendNet 221pc
Belkin F5D6001
SMC 2635W
Linksys WPC11 v1
Fiberline FL-WL-200X
3com Office Connect (3CRSHPW796)
Corega WLPCIB-11
SMC 2602W V2 EU
D-Link DWL-520 Revision C
However, some of these cards have been replaced with other chips
like the RTL8180L (Xterasys Cardbus XN-2411b, Belkin F5D6001) or
the Ralink RT2400 (SMC2635W) without a model number change.
Thanks to Infineon-ADMtek for their support of this driver.
source "drivers/net/wireless/realtek/rtl818x/Kconfig"
config MAC80211_HWSIM
tristate "Simulated radio testing tool for mac80211"
depends on MAC80211
---help---
This driver is a developer testing tool that can be used to test
IEEE 802.11 networking stack (mac80211) functionality. This is not
needed for normal wireless LAN usage and is only for testing. See
Documentation/networking/mac80211_hwsim for more information on how
to use this tool.
To compile this driver as a module, choose M here: the module will be
called mac80211_hwsim. If unsure, say N.
config MWL8K
tristate "Marvell 88W8xxx PCI/PCIe Wireless support"
depends on MAC80211 && PCI
---help---
This driver supports Marvell TOPDOG 802.11 wireless cards.
To compile this driver as a module, choose M here: the module
will be called mwl8k. If unsure, say N.
source "drivers/net/wireless/ath/Kconfig"
source "drivers/net/wireless/b43/Kconfig"
source "drivers/net/wireless/b43legacy/Kconfig"
source "drivers/net/wireless/brcm80211/Kconfig"
source "drivers/net/wireless/hostap/Kconfig"
source "drivers/net/wireless/ipw2x00/Kconfig"
source "drivers/net/wireless/iwlwifi/Kconfig"
source "drivers/net/wireless/iwlegacy/Kconfig"
source "drivers/net/wireless/libertas/Kconfig"
source "drivers/net/wireless/orinoco/Kconfig"
source "drivers/net/wireless/p54/Kconfig"
source "drivers/net/wireless/rt2x00/Kconfig"
source "drivers/net/wireless/mediatek/Kconfig"
source "drivers/net/wireless/realtek/rtlwifi/Kconfig"
source "drivers/net/wireless/realtek/rtl8xxxu/Kconfig"
source "drivers/net/wireless/ti/Kconfig"
source "drivers/net/wireless/zd1211rw/Kconfig"
source "drivers/net/wireless/mwifiex/Kconfig"
source "drivers/net/wireless/cw1200/Kconfig"
source "drivers/net/wireless/rsi/Kconfig"
endif # WLAN endif # WLAN
...@@ -2,27 +2,21 @@ ...@@ -2,27 +2,21 @@
# Makefile for the Linux Wireless network device drivers. # Makefile for the Linux Wireless network device drivers.
# #
obj-$(CONFIG_IPW2100) += ipw2x00/ obj-$(CONFIG_WLAN_VENDOR_ADMTEK) += admtek/
obj-$(CONFIG_IPW2200) += ipw2x00/ obj-$(CONFIG_WLAN_VENDOR_ATH) += ath/
obj-$(CONFIG_WLAN_VENDOR_ATMEL) += atmel/
obj-$(CONFIG_HERMES) += orinoco/ obj-$(CONFIG_WLAN_VENDOR_BROADCOM) += broadcom/
obj-$(CONFIG_WLAN_VENDOR_CISCO) += cisco/
obj-$(CONFIG_AIRO) += airo.o obj-$(CONFIG_WLAN_VENDOR_INTEL) += intel/
obj-$(CONFIG_AIRO_CS) += airo_cs.o airo.o obj-$(CONFIG_WLAN_VENDOR_INTERSIL) += intersil/
obj-$(CONFIG_WLAN_VENDOR_MARVELL) += marvell/
obj-$(CONFIG_ATMEL) += atmel.o obj-$(CONFIG_WLAN_VENDOR_MEDIATEK) += mediatek/
obj-$(CONFIG_PCI_ATMEL) += atmel_pci.o obj-$(CONFIG_WLAN_VENDOR_RALINK) += ralink/
obj-$(CONFIG_PCMCIA_ATMEL) += atmel_cs.o obj-$(CONFIG_WLAN_VENDOR_REALTEK) += realtek/
obj-$(CONFIG_WLAN_VENDOR_RSI) += rsi/
obj-$(CONFIG_AT76C50X_USB) += at76c50x-usb.o obj-$(CONFIG_WLAN_VENDOR_ST) += st/
obj-$(CONFIG_WLAN_VENDOR_TI) += ti/
obj-$(CONFIG_PRISM54) += prism54/ obj-$(CONFIG_WLAN_VENDOR_ZYDAS) += zydas/
obj-$(CONFIG_HOSTAP) += hostap/
obj-$(CONFIG_B43) += b43/
obj-$(CONFIG_B43LEGACY) += b43legacy/
obj-$(CONFIG_ZD1211RW) += zd1211rw/
obj-$(CONFIG_WLAN) += realtek/
# 16-bit wireless PCMCIA client drivers # 16-bit wireless PCMCIA client drivers
obj-$(CONFIG_PCMCIA_RAYCS) += ray_cs.o obj-$(CONFIG_PCMCIA_RAYCS) += ray_cs.o
...@@ -30,33 +24,4 @@ obj-$(CONFIG_PCMCIA_WL3501) += wl3501_cs.o ...@@ -30,33 +24,4 @@ obj-$(CONFIG_PCMCIA_WL3501) += wl3501_cs.o
obj-$(CONFIG_USB_NET_RNDIS_WLAN) += rndis_wlan.o obj-$(CONFIG_USB_NET_RNDIS_WLAN) += rndis_wlan.o
obj-$(CONFIG_USB_ZD1201) += zd1201.o
obj-$(CONFIG_LIBERTAS) += libertas/
obj-$(CONFIG_LIBERTAS_THINFIRM) += libertas_tf/
obj-$(CONFIG_ADM8211) += adm8211.o
obj-$(CONFIG_MWL8K) += mwl8k.o
obj-$(CONFIG_IWLWIFI) += iwlwifi/
obj-$(CONFIG_IWLEGACY) += iwlegacy/
obj-$(CONFIG_RT2X00) += rt2x00/
obj-$(CONFIG_WL_MEDIATEK) += mediatek/
obj-$(CONFIG_P54_COMMON) += p54/
obj-$(CONFIG_ATH_CARDS) += ath/
obj-$(CONFIG_MAC80211_HWSIM) += mac80211_hwsim.o obj-$(CONFIG_MAC80211_HWSIM) += mac80211_hwsim.o
obj-$(CONFIG_WL_TI) += ti/
obj-$(CONFIG_MWIFIEX) += mwifiex/
obj-$(CONFIG_BRCMFMAC) += brcm80211/
obj-$(CONFIG_BRCMSMAC) += brcm80211/
obj-$(CONFIG_CW1200) += cw1200/
obj-$(CONFIG_RSI_91X) += rsi/
config WLAN_VENDOR_ADMTEK
bool "ADMtek devices"
default y
---help---
If you have a wireless card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about cards. If you say Y, you will be asked for
your specific card in the following questions.
if WLAN_VENDOR_ADMTEK
config ADM8211
tristate "ADMtek ADM8211 support"
depends on MAC80211 && PCI
select CRC32
select EEPROM_93CX6
---help---
This driver is for ADM8211A, ADM8211B, and ADM8211C based cards.
These are PCI/mini-PCI/Cardbus 802.11b chips found in cards such as:
Xterasys Cardbus XN-2411b
Blitz NetWave Point PC
TrendNet 221pc
Belkin F5D6001
SMC 2635W
Linksys WPC11 v1
Fiberline FL-WL-200X
3com Office Connect (3CRSHPW796)
Corega WLPCIB-11
SMC 2602W V2 EU
D-Link DWL-520 Revision C
However, some of these cards have been replaced with other chips
like the RTL8180L (Xterasys Cardbus XN-2411b, Belkin F5D6001) or
the Ralink RT2400 (SMC2635W) without a model number change.
Thanks to Infineon-ADMtek for their support of this driver.
endif # WLAN_VENDOR_ADMTEK
obj-$(CONFIG_ADM8211) += adm8211.o
config ATH_COMMON config ATH_COMMON
tristate tristate
menuconfig ATH_CARDS config WLAN_VENDOR_ATH
tristate "Atheros Wireless Cards" bool "Atheros/Qualcomm devices"
depends on CFG80211 && (!UML || BROKEN) default y
---help--- ---help---
This will enable the support for the Atheros wireless drivers. If you have a wireless card belonging to this class, say Y.
ath5k, ath9k, ath9k_htc and ar9170 drivers share some common code, this option
enables the common ath.ko module which shares common helpers. Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about cards. If you say Y, you will be asked for
your specific card in the following questions.
For more information and documentation on this module you can visit: For more information and documentation on this module you can visit:
...@@ -17,7 +20,7 @@ menuconfig ATH_CARDS ...@@ -17,7 +20,7 @@ menuconfig ATH_CARDS
http://wireless.kernel.org/en/users/Drivers/Atheros http://wireless.kernel.org/en/users/Drivers/Atheros
if ATH_CARDS if WLAN_VENDOR_ATH
config ATH_DEBUG config ATH_DEBUG
bool "Atheros wireless debugging" bool "Atheros wireless debugging"
......
config WLAN_VENDOR_ATMEL
bool "Atmel devices"
default y
---help---
If you have a wireless card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about cards. If you say Y, you will be asked for
your specific card in the following questions.
if WLAN_VENDOR_ATMEL
config ATMEL
tristate "Atmel at76c50x chipset 802.11b support"
depends on CFG80211 && (PCI || PCMCIA)
select WIRELESS_EXT
select WEXT_PRIV
select FW_LOADER
select CRC32
---help---
A driver 802.11b wireless cards based on the Atmel fast-vnet
chips. This driver supports standard Linux wireless extensions.
Many cards based on this chipset do not have flash memory
and need their firmware loaded at start-up. If yours is
one of these, you will need to provide a firmware image
to be loaded into the card by the driver. The Atmel
firmware package can be downloaded from
<http://www.thekelleys.org.uk/atmel>
config PCI_ATMEL
tristate "Atmel at76c506 PCI cards"
depends on ATMEL && PCI
---help---
Enable support for PCI and mini-PCI cards containing the
Atmel at76c506 chip.
config PCMCIA_ATMEL
tristate "Atmel at76c502/at76c504 PCMCIA cards"
depends on ATMEL && PCMCIA
select WIRELESS_EXT
select FW_LOADER
select CRC32
---help---
Enable support for PCMCIA cards containing the
Atmel at76c502 and at76c504 chips.
config AT76C50X_USB
tristate "Atmel at76c503/at76c505/at76c505a USB cards"
depends on MAC80211 && USB
select FW_LOADER
---help---
Enable support for USB Wireless devices using Atmel at76c503,
at76c505 or at76c505a chips.
endif # WLAN_VENDOR_ATMEL
obj-$(CONFIG_ATMEL) += atmel.o
obj-$(CONFIG_PCI_ATMEL) += atmel_pci.o
obj-$(CONFIG_PCMCIA_ATMEL) += atmel_cs.o
obj-$(CONFIG_AT76C50X_USB) += at76c50x-usb.o
config WLAN_VENDOR_BROADCOM
bool "Broadcom devices"
default y
---help---
If you have a wireless card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about cards. If you say Y, you will be asked for
your specific card in the following questions.
if WLAN_VENDOR_BROADCOM
source "drivers/net/wireless/broadcom/b43/Kconfig"
source "drivers/net/wireless/broadcom/b43legacy/Kconfig"
source "drivers/net/wireless/broadcom/brcm80211/Kconfig"
endif # WLAN_VENDOR_BROADCOM
obj-$(CONFIG_B43) += b43/
obj-$(CONFIG_B43LEGACY) += b43legacy/
obj-$(CONFIG_BRCMFMAC) += brcm80211/
obj-$(CONFIG_BRCMSMAC) += brcm80211/
...@@ -16,8 +16,8 @@ ...@@ -16,8 +16,8 @@
# CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. # CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
ccflags-y += \ ccflags-y += \
-Idrivers/net/wireless/brcm80211/brcmfmac \ -Idrivers/net/wireless/broadcom/brcm80211/brcmfmac \
-Idrivers/net/wireless/brcm80211/include -Idrivers/net/wireless/broadcom/brcm80211/include
ccflags-y += -D__CHECK_ENDIAN__ ccflags-y += -D__CHECK_ENDIAN__
......
...@@ -17,9 +17,9 @@ ...@@ -17,9 +17,9 @@
ccflags-y := \ ccflags-y := \
-D__CHECK_ENDIAN__ \ -D__CHECK_ENDIAN__ \
-Idrivers/net/wireless/brcm80211/brcmsmac \ -Idrivers/net/wireless/broadcom/brcm80211/brcmsmac \
-Idrivers/net/wireless/brcm80211/brcmsmac/phy \ -Idrivers/net/wireless/broadcom/brcm80211/brcmsmac/phy \
-Idrivers/net/wireless/brcm80211/include -Idrivers/net/wireless/broadcom/brcm80211/include
brcmsmac-y := \ brcmsmac-y := \
mac80211_if.o \ mac80211_if.o \
......
...@@ -16,8 +16,8 @@ ...@@ -16,8 +16,8 @@
# CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. # CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
ccflags-y := \ ccflags-y := \
-Idrivers/net/wireless/brcm80211/brcmutil \ -Idrivers/net/wireless/broadcom/brcm80211/brcmutil \
-Idrivers/net/wireless/brcm80211/include -Idrivers/net/wireless/broadcom/brcm80211/include
obj-$(CONFIG_BRCMUTIL) += brcmutil.o obj-$(CONFIG_BRCMUTIL) += brcmutil.o
brcmutil-objs = utils.o d11.o brcmutil-objs = utils.o d11.o
config WLAN_VENDOR_CISCO
bool "Cisco devices"
default y
---help---
If you have a wireless card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about cards. If you say Y, you will be asked for
your specific card in the following questions.
if WLAN_VENDOR_CISCO
config AIRO
tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards"
depends on CFG80211 && ISA_DMA_API && (PCI || BROKEN)
select WIRELESS_EXT
select CRYPTO
select WEXT_SPY
select WEXT_PRIV
---help---
This is the standard Linux driver to support Cisco/Aironet ISA and
PCI 802.11 wireless cards.
It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
- with or without encryption) as well as card before the Cisco
acquisition (Aironet 4500, Aironet 4800, Aironet 4800B).
This driver support both the standard Linux Wireless Extensions
and Cisco proprietary API, so both the Linux Wireless Tools and the
Cisco Linux utilities can be used to configure the card.
The driver can be compiled as a module and will be named "airo".
config AIRO_CS
tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
depends on CFG80211 && PCMCIA && (BROKEN || !M32R)
select WIRELESS_EXT
select WEXT_SPY
select WEXT_PRIV
select CRYPTO
select CRYPTO_AES
---help---
This is the standard Linux driver to support Cisco/Aironet PCMCIA
802.11 wireless cards. This driver is the same as the Aironet
driver part of the Linux Pcmcia package.
It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
- with or without encryption) as well as card before the Cisco
acquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also
supports OEM of Cisco such as the DELL TrueMobile 4800 and Xircom
802.11b cards.
This driver support both the standard Linux Wireless Extensions
and Cisco proprietary API, so both the Linux Wireless Tools and the
Cisco Linux utilities can be used to configure the card.
endif # WLAN_VENDOR_CISCO
obj-$(CONFIG_AIRO) += airo.o
obj-$(CONFIG_AIRO_CS) += airo_cs.o airo.o
config WLAN_VENDOR_INTEL
bool "Intel devices"
default y
---help---
If you have a wireless card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about cards. If you say Y, you will be asked for
your specific card in the following questions.
if WLAN_VENDOR_INTEL
source "drivers/net/wireless/intel/ipw2x00/Kconfig"
source "drivers/net/wireless/intel/iwlegacy/Kconfig"
source "drivers/net/wireless/intel/iwlwifi/Kconfig"
endif # WLAN_VENDOR_INTEL
obj-$(CONFIG_IPW2100) += ipw2x00/
obj-$(CONFIG_IPW2200) += ipw2x00/
obj-$(CONFIG_IWLEGACY) += iwlegacy/
obj-$(CONFIG_IWLWIFI) += iwlwifi/
config WLAN_VENDOR_INTERSIL
bool "Intersil devices"
default y
---help---
If you have a wireless card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about cards. If you say Y, you will be asked for
your specific card in the following questions.
if WLAN_VENDOR_INTERSIL
source "drivers/net/wireless/intersil/hostap/Kconfig"
source "drivers/net/wireless/intersil/orinoco/Kconfig"
source "drivers/net/wireless/intersil/p54/Kconfig"
config PRISM54
tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus (DEPRECATED)'
depends on PCI
select WIRELESS_EXT
select WEXT_SPY
select WEXT_PRIV
select FW_LOADER
---help---
This enables support for FullMAC PCI/Cardbus prism54 devices. This
driver is now deprecated in favor for the SoftMAC driver, p54pci.
p54pci supports FullMAC PCI/Cardbus devices as well.
For more information refer to the p54 wiki:
http://wireless.kernel.org/en/users/Drivers/p54
Note: You need a motherboard with DMA support to use any of these cards
When built as module you get the module prism54
endif # WLAN_VENDOR_INTERSIL
obj-$(CONFIG_HOSTAP) += hostap/
obj-$(CONFIG_HERMES) += orinoco/
obj-$(CONFIG_P54_COMMON) += p54/
obj-$(CONFIG_PRISM54) += prism54/
config WLAN_VENDOR_MARVELL
bool "Marvell devices"
default y
---help---
If you have a wireless card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about cards. If you say Y, you will be asked for
your specific card in the following questions.
if WLAN_VENDOR_MARVELL
source "drivers/net/wireless/marvell/libertas/Kconfig"
source "drivers/net/wireless/marvell/libertas_tf/Kconfig"
source "drivers/net/wireless/marvell/mwifiex/Kconfig"
config MWL8K
tristate "Marvell 88W8xxx PCI/PCIe Wireless support"
depends on MAC80211 && PCI
---help---
This driver supports Marvell TOPDOG 802.11 wireless cards.
To compile this driver as a module, choose M here: the module
will be called mwl8k. If unsure, say N.
endif # WLAN_VENDOR_MARVELL
obj-$(CONFIG_LIBERTAS) += libertas/
obj-$(CONFIG_LIBERTAS_THINFIRM) += libertas_tf/
obj-$(CONFIG_MWIFIEX) += mwifiex/
obj-$(CONFIG_MWL8K) += mwl8k.o
config LIBERTAS_THINFIRM
tristate "Marvell 8xxx Libertas WLAN driver support with thin firmware"
depends on MAC80211
select FW_LOADER
---help---
A library for Marvell Libertas 8xxx devices using thinfirm.
config LIBERTAS_THINFIRM_DEBUG
bool "Enable full debugging output in the Libertas thin firmware module."
depends on LIBERTAS_THINFIRM
---help---
Debugging support.
config LIBERTAS_THINFIRM_USB
tristate "Marvell Libertas 8388 USB 802.11b/g cards with thin firmware"
depends on LIBERTAS_THINFIRM && USB
---help---
A driver for Marvell Libertas 8388 USB devices using thinfirm.
menuconfig WL_MEDIATEK config WLAN_VENDOR_MEDIATEK
bool "Mediatek Wireless LAN support" bool "MediaTek devices"
default y
---help--- ---help---
Enable community drivers for MediaTek WiFi devices. If you have a wireless card belonging to this class, say Y.
Those drivers make use of the Linux mac80211 stack.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about cards. If you say Y, you will be asked for
your specific card in the following questions.
if WL_MEDIATEK if WLAN_VENDOR_MEDIATEK
source "drivers/net/wireless/mediatek/mt7601u/Kconfig" source "drivers/net/wireless/mediatek/mt7601u/Kconfig"
endif # WL_MEDIATEK endif # WLAN_VENDOR_MEDIATEK
config WLAN_VENDOR_RALINK
bool "Ralink devices"
default y
---help---
If you have a wireless card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about cards. If you say Y, you will be asked for
your specific card in the following questions.
if WLAN_VENDOR_RALINK
source "drivers/net/wireless/ralink/rt2x00/Kconfig"
endif # WLAN_VENDOR_RALINK
obj-$(CONFIG_RT2X00) += rt2x00/
config WLAN_VENDOR_REALTEK
bool "Realtek devices"
default y
---help---
If you have a wireless card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about cards. If you say Y, you will be asked for
your specific card in the following questions.
if WLAN_VENDOR_REALTEK
source "drivers/net/wireless/realtek/rtl818x/Kconfig"
source "drivers/net/wireless/realtek/rtlwifi/Kconfig"
source "drivers/net/wireless/realtek/rtl8xxxu/Kconfig"
endif # WLAN_VENDOR_REALTEK
config WLAN_VENDOR_RSI
bool "Redpine Signals Inc devices"
default y
---help---
If you have a wireless card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about cards. If you say Y, you will be asked for
your specific card in the following questions.
if WLAN_VENDOR_RSI
config RSI_91X config RSI_91X
tristate "Redpine Signals Inc 91x WLAN driver support" tristate "Redpine Signals Inc 91x WLAN driver support"
depends on MAC80211 depends on MAC80211
...@@ -28,3 +41,5 @@ config RSI_USB ...@@ -28,3 +41,5 @@ config RSI_USB
---help--- ---help---
This option enables the USB bus support in rsi drivers. This option enables the USB bus support in rsi drivers.
Select M (recommended), if you have a RSI 1x1 wireless module. Select M (recommended), if you have a RSI 1x1 wireless module.
endif # WLAN_VENDOR_RSI
config WLAN_VENDOR_ST
bool "STMicroelectronics devices"
default y
---help---
If you have a wireless card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about cards. If you say Y, you will be asked for
your specific card in the following questions.
if WLAN_VENDOR_ST
source "drivers/net/wireless/st/cw1200/Kconfig"
endif # WLAN_VENDOR_ST
obj-$(CONFIG_CW1200) += cw1200/
menuconfig WL_TI config WLAN_VENDOR_TI
bool "TI Wireless LAN support" bool "Texas Instrument devices"
default y
---help--- ---help---
This section contains support for all the wireless drivers If you have a wireless card belonging to this class, say Y.
for Texas Instruments WLAN chips, such as wl1251 and the wl12xx
family. Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about cards. If you say Y, you will be asked for
your specific card in the following questions.
if WL_TI if WLAN_VENDOR_TI
source "drivers/net/wireless/ti/wl1251/Kconfig" source "drivers/net/wireless/ti/wl1251/Kconfig"
source "drivers/net/wireless/ti/wl12xx/Kconfig" source "drivers/net/wireless/ti/wl12xx/Kconfig"
source "drivers/net/wireless/ti/wl18xx/Kconfig" source "drivers/net/wireless/ti/wl18xx/Kconfig"
...@@ -21,4 +25,4 @@ config WILINK_PLATFORM_DATA ...@@ -21,4 +25,4 @@ config WILINK_PLATFORM_DATA
Small platform data bit needed to pass data to the sdio modules. Small platform data bit needed to pass data to the sdio modules.
endif # WL_TI endif # WLAN_VENDOR_TI
menuconfig WL1251 config WL1251
tristate "TI wl1251 driver support" tristate "TI wl1251 driver support"
depends on MAC80211 depends on MAC80211
select FW_LOADER select FW_LOADER
......
config WLCORE config WLCORE
tristate "TI wlcore support" tristate "TI wlcore support"
depends on WL_TI && MAC80211 depends on MAC80211
select FW_LOADER select FW_LOADER
---help--- ---help---
This module contains the main code for TI WLAN chips. It abstracts This module contains the main code for TI WLAN chips. It abstracts
......
config WLAN_VENDOR_ZYDAS
bool "ZyDAS devices"
default y
---help---
If you have a wireless card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about cards. If you say Y, you will be asked for
your specific card in the following questions.
if WLAN_VENDOR_ZYDAS
config USB_ZD1201
tristate "USB ZD1201 based Wireless device support"
depends on CFG80211 && USB
select WIRELESS_EXT
select WEXT_PRIV
select FW_LOADER
---help---
Say Y if you want to use wireless LAN adapters based on the ZyDAS
ZD1201 chip.
This driver makes the adapter appear as a normal Ethernet interface,
typically on wlan0.
The zd1201 device requires external firmware to be loaded.
This can be found at http://linux-lc100020.sourceforge.net/
To compile this driver as a module, choose M here: the
module will be called zd1201.
source "drivers/net/wireless/zydas/zd1211rw/Kconfig"
endif # WLAN_VENDOR_ZYDAS
obj-$(CONFIG_ZD1211RW) += zd1211rw/
obj-$(CONFIG_USB_ZD1201) += zd1201.o
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment