Commit c5b84b3b authored by Russell King's avatar Russell King Committed by Russell King

Merge branch 'for-rmk' of...

Merge branch 'for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel

Conflicts:

	arch/arm/mach-pxa/pxa25x.c
parents d281bc9d bc2fd1c0
...@@ -624,6 +624,12 @@ proc_types: ...@@ -624,6 +624,12 @@ proc_types:
b __armv4_mmu_cache_off b __armv4_mmu_cache_off
b __armv4_mmu_cache_flush b __armv4_mmu_cache_flush
.word 0x56056930
.word 0xff0ffff0 @ PXA935
b __armv4_mmu_cache_on
b __armv4_mmu_cache_off
b __armv4_mmu_cache_flush
.word 0x56050000 @ Feroceon .word 0x56050000 @ Feroceon
.word 0xff0f0000 .word 0xff0f0000
b __armv4_mmu_cache_on b __armv4_mmu_cache_on
......
...@@ -1108,6 +1108,7 @@ void locomo_frontlight_set(struct locomo_dev *dev, int duty, int vr, int bpwf) ...@@ -1108,6 +1108,7 @@ void locomo_frontlight_set(struct locomo_dev *dev, int duty, int vr, int bpwf)
locomo_writel(bpwf | LOCOMO_ALC_EN, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS); locomo_writel(bpwf | LOCOMO_ALC_EN, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS);
spin_unlock_irqrestore(&lchip->lock, flags); spin_unlock_irqrestore(&lchip->lock, flags);
} }
EXPORT_SYMBOL(locomo_frontlight_set);
/* /*
* LoCoMo "Register Access Bus." * LoCoMo "Register Access Bus."
......
This diff is collapsed.
...@@ -19,6 +19,9 @@ config CPU_PXA320 ...@@ -19,6 +19,9 @@ config CPU_PXA320
config CPU_PXA930 config CPU_PXA930
bool "PXA930 (codename Tavor-P)" bool "PXA930 (codename Tavor-P)"
config CPU_PXA935
bool "PXA935 (codename Tavor-P65)"
endmenu endmenu
endif endif
...@@ -199,6 +202,10 @@ config MACH_E800 ...@@ -199,6 +202,10 @@ config MACH_E800
config TRIZEPS_PXA config TRIZEPS_PXA
bool "PXA based Keith und Koep Trizeps DIMM-Modules" bool "PXA based Keith und Koep Trizeps DIMM-Modules"
config MACH_H5000
bool "HP iPAQ h5000"
select PXA25x
config MACH_TRIZEPS4 config MACH_TRIZEPS4
bool "Keith und Koep Trizeps4 DIMM-Module" bool "Keith und Koep Trizeps4 DIMM-Module"
depends on TRIZEPS_PXA depends on TRIZEPS_PXA
...@@ -283,7 +290,6 @@ config MACH_MIOA701 ...@@ -283,7 +290,6 @@ config MACH_MIOA701
bool "Mitac Mio A701 Support" bool "Mitac Mio A701 Support"
select PXA27x select PXA27x
select IWMMXT select IWMMXT
select LEDS_GPIO
select HAVE_PWM select HAVE_PWM
select GPIO_SYSFS select GPIO_SYSFS
help help
...@@ -396,6 +402,12 @@ config PXA27x ...@@ -396,6 +402,12 @@ config PXA27x
help help
Select code specific to PXA27x variants Select code specific to PXA27x variants
config CPU_PXA26x
bool
select PXA25x
help
Select code specific to PXA26x (codename Dalhart)
config PXA3xx config PXA3xx
bool bool
select CPU_XSC3 select CPU_XSC3
......
...@@ -35,6 +35,7 @@ obj-$(CONFIG_MACH_MP900C) += mp900.o ...@@ -35,6 +35,7 @@ obj-$(CONFIG_MACH_MP900C) += mp900.o
obj-$(CONFIG_ARCH_PXA_IDP) += idp.o obj-$(CONFIG_ARCH_PXA_IDP) += idp.o
obj-$(CONFIG_MACH_TRIZEPS4) += trizeps4.o obj-$(CONFIG_MACH_TRIZEPS4) += trizeps4.o
obj-$(CONFIG_MACH_COLIBRI) += colibri.o obj-$(CONFIG_MACH_COLIBRI) += colibri.o
obj-$(CONFIG_MACH_H5000) += h5000.o
obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o sharpsl_pm.o corgi_pm.o obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o sharpsl_pm.o corgi_pm.o
obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o sharpsl_pm.o spitz_pm.o obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o sharpsl_pm.o spitz_pm.o
obj-$(CONFIG_CORGI_SSP_DEPRECATED) += corgi_ssp.o corgi_lcd.o obj-$(CONFIG_CORGI_SSP_DEPRECATED) += corgi_ssp.o corgi_lcd.o
......
...@@ -14,7 +14,6 @@ ...@@ -14,7 +14,6 @@
#include <asm/clkdev.h> #include <asm/clkdev.h>
#include <mach/pxa2xx-regs.h> #include <mach/pxa2xx-regs.h>
#include <mach/pxa2xx-gpio.h>
#include <mach/hardware.h> #include <mach/hardware.h>
#include "devices.h" #include "devices.h"
......
...@@ -31,7 +31,6 @@ ...@@ -31,7 +31,6 @@
#include <mach/mfp-pxa300.h> #include <mach/mfp-pxa300.h>
#include <mach/hardware.h> #include <mach/hardware.h>
#include <mach/gpio.h>
#include <mach/pxafb.h> #include <mach/pxafb.h>
#include <mach/mmc.h> #include <mach/mmc.h>
#include <mach/ohci.h> #include <mach/ohci.h>
...@@ -137,6 +136,10 @@ static mfp_cfg_t cm_x300_mfp_cfg[] __initdata = { ...@@ -137,6 +136,10 @@ static mfp_cfg_t cm_x300_mfp_cfg[] __initdata = {
GPIO82_GPIO | MFP_PULL_HIGH, /* MMC CD */ GPIO82_GPIO | MFP_PULL_HIGH, /* MMC CD */
GPIO85_GPIO, /* MMC WP */ GPIO85_GPIO, /* MMC WP */
GPIO99_GPIO, /* Ethernet IRQ */ GPIO99_GPIO, /* Ethernet IRQ */
/* Standard I2C */
GPIO21_I2C_SCL,
GPIO22_I2C_SDA,
}; };
#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
......
...@@ -19,6 +19,7 @@ ...@@ -19,6 +19,7 @@
#include <linux/fs.h> #include <linux/fs.h>
#include <linux/interrupt.h> #include <linux/interrupt.h>
#include <linux/mmc/host.h> #include <linux/mmc/host.h>
#include <linux/mtd/physmap.h>
#include <linux/pm.h> #include <linux/pm.h>
#include <linux/gpio.h> #include <linux/gpio.h>
#include <linux/backlight.h> #include <linux/backlight.h>
...@@ -541,11 +542,42 @@ static void __init corgi_init_spi(void) ...@@ -541,11 +542,42 @@ static void __init corgi_init_spi(void)
static inline void corgi_init_spi(void) {} static inline void corgi_init_spi(void) {}
#endif #endif
static struct mtd_partition sharpsl_rom_parts[] = {
{
.name ="Boot PROM Filesystem",
.offset = 0x00120000,
.size = MTDPART_SIZ_FULL,
},
};
static struct physmap_flash_data sharpsl_rom_data = {
.width = 2,
.nr_parts = ARRAY_SIZE(sharpsl_rom_parts),
.parts = sharpsl_rom_parts,
};
static struct resource sharpsl_rom_resources[] = {
{
.start = 0x00000000,
.end = 0x007fffff,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device sharpsl_rom_device = {
.name = "physmap-flash",
.id = -1,
.resource = sharpsl_rom_resources,
.num_resources = ARRAY_SIZE(sharpsl_rom_resources),
.dev.platform_data = &sharpsl_rom_data,
};
static struct platform_device *devices[] __initdata = { static struct platform_device *devices[] __initdata = {
&corgiscoop_device, &corgiscoop_device,
&corgifb_device, &corgifb_device,
&corgikbd_device, &corgikbd_device,
&corgiled_device, &corgiled_device,
&sharpsl_rom_device,
}; };
static void corgi_poweroff(void) static void corgi_poweroff(void)
......
...@@ -64,7 +64,7 @@ typedef struct { ...@@ -64,7 +64,7 @@ typedef struct {
/* Define the refresh period in mSec for the SDRAM and the number of rows */ /* Define the refresh period in mSec for the SDRAM and the number of rows */
#define SDRAM_TREF 64 /* standard 64ms SDRAM */ #define SDRAM_TREF 64 /* standard 64ms SDRAM */
#define SDRAM_ROWS 4096 /* 64MB=8192 32MB=4096 */ static unsigned int sdram_rows;
#define CCLKCFG_TURBO 0x1 #define CCLKCFG_TURBO 0x1
#define CCLKCFG_FCS 0x2 #define CCLKCFG_FCS 0x2
...@@ -73,6 +73,9 @@ typedef struct { ...@@ -73,6 +73,9 @@ typedef struct {
#define MDREFR_DB2_MASK (MDREFR_K2DB2 | MDREFR_K1DB2) #define MDREFR_DB2_MASK (MDREFR_K2DB2 | MDREFR_K1DB2)
#define MDREFR_DRI_MASK 0xFFF #define MDREFR_DRI_MASK 0xFFF
#define MDCNFG_DRAC2(mdcnfg) (((mdcnfg) >> 21) & 0x3)
#define MDCNFG_DRAC0(mdcnfg) (((mdcnfg) >> 5) & 0x3)
/* /*
* PXA255 definitions * PXA255 definitions
*/ */
...@@ -109,6 +112,10 @@ static struct cpufreq_frequency_table ...@@ -109,6 +112,10 @@ static struct cpufreq_frequency_table
static struct cpufreq_frequency_table static struct cpufreq_frequency_table
pxa255_turbo_freq_table[NUM_PXA25x_TURBO_FREQS+1]; pxa255_turbo_freq_table[NUM_PXA25x_TURBO_FREQS+1];
static unsigned int pxa255_turbo_table;
module_param(pxa255_turbo_table, uint, 0);
MODULE_PARM_DESC(pxa255_turbo_table, "Selects the frequency table (0 = run table, !0 = turbo table)");
/* /*
* PXA270 definitions * PXA270 definitions
* *
...@@ -158,22 +165,16 @@ static struct cpufreq_frequency_table ...@@ -158,22 +165,16 @@ static struct cpufreq_frequency_table
extern unsigned get_clk_frequency_khz(int info); extern unsigned get_clk_frequency_khz(int info);
static void find_freq_tables(struct cpufreq_policy *policy, static void find_freq_tables(struct cpufreq_frequency_table **freq_table,
struct cpufreq_frequency_table **freq_table,
pxa_freqs_t **pxa_freqs) pxa_freqs_t **pxa_freqs)
{ {
if (cpu_is_pxa25x()) { if (cpu_is_pxa25x()) {
if (policy->policy == CPUFREQ_POLICY_PERFORMANCE) { if (!pxa255_turbo_table) {
*pxa_freqs = pxa255_run_freqs; *pxa_freqs = pxa255_run_freqs;
*freq_table = pxa255_run_freq_table; *freq_table = pxa255_run_freq_table;
} else if (policy->policy == CPUFREQ_POLICY_POWERSAVE) { } else {
*pxa_freqs = pxa255_turbo_freqs; *pxa_freqs = pxa255_turbo_freqs;
*freq_table = pxa255_turbo_freq_table; *freq_table = pxa255_turbo_freq_table;
} else {
printk("CPU PXA: Unknown policy found. "
"Using CPUFREQ_POLICY_PERFORMANCE\n");
*pxa_freqs = pxa255_run_freqs;
*freq_table = pxa255_run_freq_table;
} }
} }
if (cpu_is_pxa27x()) { if (cpu_is_pxa27x()) {
...@@ -194,14 +195,28 @@ static void pxa27x_guess_max_freq(void) ...@@ -194,14 +195,28 @@ static void pxa27x_guess_max_freq(void)
} }
} }
static void init_sdram_rows(void)
{
uint32_t mdcnfg = MDCNFG;
unsigned int drac2 = 0, drac0 = 0;
if (mdcnfg & (MDCNFG_DE2 | MDCNFG_DE3))
drac2 = MDCNFG_DRAC2(mdcnfg);
if (mdcnfg & (MDCNFG_DE0 | MDCNFG_DE1))
drac0 = MDCNFG_DRAC0(mdcnfg);
sdram_rows = 1 << (11 + max(drac0, drac2));
}
static u32 mdrefr_dri(unsigned int freq) static u32 mdrefr_dri(unsigned int freq)
{ {
u32 dri = 0; u32 dri = 0;
if (cpu_is_pxa25x()) if (cpu_is_pxa25x())
dri = ((freq * SDRAM_TREF) / (SDRAM_ROWS * 32)); dri = ((freq * SDRAM_TREF) / (sdram_rows * 32));
if (cpu_is_pxa27x()) if (cpu_is_pxa27x())
dri = ((freq * SDRAM_TREF) / (SDRAM_ROWS - 31)) / 32; dri = ((freq * SDRAM_TREF) / (sdram_rows - 31)) / 32;
return dri; return dri;
} }
...@@ -212,7 +227,7 @@ static int pxa_verify_policy(struct cpufreq_policy *policy) ...@@ -212,7 +227,7 @@ static int pxa_verify_policy(struct cpufreq_policy *policy)
pxa_freqs_t *pxa_freqs; pxa_freqs_t *pxa_freqs;
int ret; int ret;
find_freq_tables(policy, &pxa_freqs_table, &pxa_freqs); find_freq_tables(&pxa_freqs_table, &pxa_freqs);
ret = cpufreq_frequency_table_verify(policy, pxa_freqs_table); ret = cpufreq_frequency_table_verify(policy, pxa_freqs_table);
if (freq_debug) if (freq_debug)
...@@ -240,7 +255,7 @@ static int pxa_set_target(struct cpufreq_policy *policy, ...@@ -240,7 +255,7 @@ static int pxa_set_target(struct cpufreq_policy *policy,
unsigned int unused, preset_mdrefr, postset_mdrefr, cclkcfg; unsigned int unused, preset_mdrefr, postset_mdrefr, cclkcfg;
/* Get the current policy */ /* Get the current policy */
find_freq_tables(policy, &pxa_freqs_table, &pxa_freq_settings); find_freq_tables(&pxa_freqs_table, &pxa_freq_settings);
/* Lookup the next frequency */ /* Lookup the next frequency */
if (cpufreq_frequency_table_target(policy, pxa_freqs_table, if (cpufreq_frequency_table_target(policy, pxa_freqs_table,
...@@ -329,11 +344,15 @@ static __init int pxa_cpufreq_init(struct cpufreq_policy *policy) ...@@ -329,11 +344,15 @@ static __init int pxa_cpufreq_init(struct cpufreq_policy *policy)
{ {
int i; int i;
unsigned int freq; unsigned int freq;
struct cpufreq_frequency_table *pxa255_freq_table;
pxa_freqs_t *pxa255_freqs;
/* try to guess pxa27x cpu */ /* try to guess pxa27x cpu */
if (cpu_is_pxa27x()) if (cpu_is_pxa27x())
pxa27x_guess_max_freq(); pxa27x_guess_max_freq();
init_sdram_rows();
/* set default policy and cpuinfo */ /* set default policy and cpuinfo */
policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */ policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */
policy->cur = get_clk_frequency_khz(0); /* current freq */ policy->cur = get_clk_frequency_khz(0); /* current freq */
...@@ -354,6 +373,8 @@ static __init int pxa_cpufreq_init(struct cpufreq_policy *policy) ...@@ -354,6 +373,8 @@ static __init int pxa_cpufreq_init(struct cpufreq_policy *policy)
} }
pxa255_turbo_freq_table[i].frequency = CPUFREQ_TABLE_END; pxa255_turbo_freq_table[i].frequency = CPUFREQ_TABLE_END;
pxa255_turbo_table = !!pxa255_turbo_table;
/* Generate the pxa27x cpufreq_frequency_table struct */ /* Generate the pxa27x cpufreq_frequency_table struct */
for (i = 0; i < NUM_PXA27x_FREQS; i++) { for (i = 0; i < NUM_PXA27x_FREQS; i++) {
freq = pxa27x_freqs[i].khz; freq = pxa27x_freqs[i].khz;
...@@ -368,8 +389,12 @@ static __init int pxa_cpufreq_init(struct cpufreq_policy *policy) ...@@ -368,8 +389,12 @@ static __init int pxa_cpufreq_init(struct cpufreq_policy *policy)
* Set the policy's minimum and maximum frequencies from the tables * Set the policy's minimum and maximum frequencies from the tables
* just constructed. This sets cpuinfo.mxx_freq, min and max. * just constructed. This sets cpuinfo.mxx_freq, min and max.
*/ */
if (cpu_is_pxa25x()) if (cpu_is_pxa25x()) {
cpufreq_frequency_table_cpuinfo(policy, pxa255_run_freq_table); find_freq_tables(&pxa255_freq_table, &pxa255_freqs);
pr_info("PXA255 cpufreq using %s frequency table\n",
pxa255_turbo_table ? "turbo" : "run");
cpufreq_frequency_table_cpuinfo(policy, pxa255_freq_table);
}
else if (cpu_is_pxa27x()) else if (cpu_is_pxa27x())
cpufreq_frequency_table_cpuinfo(policy, pxa27x_freq_table); cpufreq_frequency_table_cpuinfo(policy, pxa27x_freq_table);
......
...@@ -4,13 +4,12 @@ ...@@ -4,13 +4,12 @@
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/dma-mapping.h> #include <linux/dma-mapping.h>
#include <mach/gpio.h> #include <mach/pxa-regs.h>
#include <mach/udc.h> #include <mach/udc.h>
#include <mach/pxafb.h> #include <mach/pxafb.h>
#include <mach/mmc.h> #include <mach/mmc.h>
#include <mach/irda.h> #include <mach/irda.h>
#include <mach/i2c.h> #include <mach/i2c.h>
#include <mach/mfp-pxa27x.h>
#include <mach/ohci.h> #include <mach/ohci.h>
#include <mach/pxa27x_keypad.h> #include <mach/pxa27x_keypad.h>
#include <mach/pxa2xx_spi.h> #include <mach/pxa2xx_spi.h>
...@@ -156,8 +155,8 @@ void __init set_pxa_fb_parent(struct device *parent_dev) ...@@ -156,8 +155,8 @@ void __init set_pxa_fb_parent(struct device *parent_dev)
static struct resource pxa_resource_ffuart[] = { static struct resource pxa_resource_ffuart[] = {
{ {
.start = __PREG(FFUART), .start = 0x40100000,
.end = __PREG(FFUART) + 35, .end = 0x40100023,
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, { }, {
.start = IRQ_FFUART, .start = IRQ_FFUART,
...@@ -175,8 +174,8 @@ struct platform_device pxa_device_ffuart= { ...@@ -175,8 +174,8 @@ struct platform_device pxa_device_ffuart= {
static struct resource pxa_resource_btuart[] = { static struct resource pxa_resource_btuart[] = {
{ {
.start = __PREG(BTUART), .start = 0x40200000,
.end = __PREG(BTUART) + 35, .end = 0x40200023,
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, { }, {
.start = IRQ_BTUART, .start = IRQ_BTUART,
...@@ -194,8 +193,8 @@ struct platform_device pxa_device_btuart = { ...@@ -194,8 +193,8 @@ struct platform_device pxa_device_btuart = {
static struct resource pxa_resource_stuart[] = { static struct resource pxa_resource_stuart[] = {
{ {
.start = __PREG(STUART), .start = 0x40700000,
.end = __PREG(STUART) + 35, .end = 0x40700023,
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, { }, {
.start = IRQ_STUART, .start = IRQ_STUART,
...@@ -213,8 +212,8 @@ struct platform_device pxa_device_stuart = { ...@@ -213,8 +212,8 @@ struct platform_device pxa_device_stuart = {
static struct resource pxa_resource_hwuart[] = { static struct resource pxa_resource_hwuart[] = {
{ {
.start = __PREG(HWUART), .start = 0x41600000,
.end = __PREG(HWUART) + 47, .end = 0x4160002F,
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, { }, {
.start = IRQ_HWUART, .start = IRQ_HWUART,
...@@ -249,18 +248,53 @@ struct platform_device pxa_device_i2c = { ...@@ -249,18 +248,53 @@ struct platform_device pxa_device_i2c = {
.num_resources = ARRAY_SIZE(pxai2c_resources), .num_resources = ARRAY_SIZE(pxai2c_resources),
}; };
static unsigned long pxa27x_i2c_mfp_cfg[] = {
GPIO117_I2C_SCL,
GPIO118_I2C_SDA,
};
void __init pxa_set_i2c_info(struct i2c_pxa_platform_data *info) void __init pxa_set_i2c_info(struct i2c_pxa_platform_data *info)
{ {
if (cpu_is_pxa27x())
pxa2xx_mfp_config(ARRAY_AND_SIZE(pxa27x_i2c_mfp_cfg));
pxa_register_device(&pxa_device_i2c, info); pxa_register_device(&pxa_device_i2c, info);
} }
#ifdef CONFIG_PXA27x
static struct resource pxa27x_resources_i2c_power[] = {
{
.start = 0x40f00180,
.end = 0x40f001a3,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_PWRI2C,
.end = IRQ_PWRI2C,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device pxa27x_device_i2c_power = {
.name = "pxa2xx-i2c",
.id = 1,
.resource = pxa27x_resources_i2c_power,
.num_resources = ARRAY_SIZE(pxa27x_resources_i2c_power),
};
#endif
#ifdef CONFIG_PXA3xx
static struct resource pxa3xx_resources_i2c_power[] = {
{
.start = 0x40f500c0,
.end = 0x40f500d3,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_PWRI2C,
.end = IRQ_PWRI2C,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device pxa3xx_device_i2c_power = {
.name = "pxa2xx-i2c",
.id = 1,
.resource = pxa3xx_resources_i2c_power,
.num_resources = ARRAY_SIZE(pxa3xx_resources_i2c_power),
};
#endif
static struct resource pxai2s_resources[] = { static struct resource pxai2s_resources[] = {
{ {
.start = 0x40400000, .start = 0x40400000,
...@@ -296,11 +330,36 @@ void __init pxa_set_ficp_info(struct pxaficp_platform_data *info) ...@@ -296,11 +330,36 @@ void __init pxa_set_ficp_info(struct pxaficp_platform_data *info)
pxa_register_device(&pxa_device_ficp, info); pxa_register_device(&pxa_device_ficp, info);
} }
struct platform_device pxa_device_rtc = { static struct resource pxa_rtc_resources[] = {
[0] = {
.start = 0x40900000,
.end = 0x40900000 + 0x3b,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_RTC1Hz,
.end = IRQ_RTC1Hz,
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = IRQ_RTCAlrm,
.end = IRQ_RTCAlrm,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device sa1100_device_rtc = {
.name = "sa1100-rtc", .name = "sa1100-rtc",
.id = -1, .id = -1,
}; };
struct platform_device pxa_device_rtc = {
.name = "pxa-rtc",
.id = -1,
.num_resources = ARRAY_SIZE(pxa_rtc_resources),
.resource = pxa_rtc_resources,
};
static struct resource pxa_ac97_resources[] = { static struct resource pxa_ac97_resources[] = {
[0] = { [0] = {
.start = 0x40500000, .start = 0x40500000,
......
...@@ -11,6 +11,7 @@ extern struct platform_device pxa_device_hwuart; ...@@ -11,6 +11,7 @@ extern struct platform_device pxa_device_hwuart;
extern struct platform_device pxa_device_i2c; extern struct platform_device pxa_device_i2c;
extern struct platform_device pxa_device_i2s; extern struct platform_device pxa_device_i2s;
extern struct platform_device pxa_device_ficp; extern struct platform_device pxa_device_ficp;
extern struct platform_device sa1100_device_rtc;
extern struct platform_device pxa_device_rtc; extern struct platform_device pxa_device_rtc;
extern struct platform_device pxa_device_ac97; extern struct platform_device pxa_device_ac97;
......
...@@ -113,6 +113,10 @@ static unsigned long ezx_pin_config[] __initdata = { ...@@ -113,6 +113,10 @@ static unsigned long ezx_pin_config[] __initdata = {
GPIO91_USB_P3_1, /* ICL_XRXD */ GPIO91_USB_P3_1, /* ICL_XRXD */
GPIO56_USB_P3_4, /* ICL_VMOUT */ GPIO56_USB_P3_4, /* ICL_VMOUT */
GPIO113_USB_P3_3, /* /ICL_VMIN */ GPIO113_USB_P3_3, /* /ICL_VMIN */
/* I2C */
GPIO117_I2C_SCL,
GPIO118_I2C_SDA,
}; };
static void __init ezx_init(void) static void __init ezx_init(void)
......
...@@ -25,6 +25,18 @@ ...@@ -25,6 +25,18 @@
#include "generic.h" #include "generic.h"
#define GPIO0_BASE ((void __iomem *)io_p2v(0x40E00000))
#define GPIO1_BASE ((void __iomem *)io_p2v(0x40E00004))
#define GPIO2_BASE ((void __iomem *)io_p2v(0x40E00008))
#define GPIO3_BASE ((void __iomem *)io_p2v(0x40E00100))
#define GPLR_OFFSET 0x00
#define GPDR_OFFSET 0x0C
#define GPSR_OFFSET 0x18
#define GPCR_OFFSET 0x24
#define GRER_OFFSET 0x30
#define GFER_OFFSET 0x3C
#define GEDR_OFFSET 0x48
struct pxa_gpio_chip { struct pxa_gpio_chip {
struct gpio_chip chip; struct gpio_chip chip;
...@@ -33,6 +45,18 @@ struct pxa_gpio_chip { ...@@ -33,6 +45,18 @@ struct pxa_gpio_chip {
int pxa_last_gpio; int pxa_last_gpio;
#ifdef CONFIG_CPU_PXA26x
/* GPIO86/87/88/89 on PXA26x have their direction bits in GPDR2 inverted,
* as well as their Alternate Function value being '1' for GPIO in GAFRx.
*/
static int __gpio_is_inverted(unsigned gpio)
{
return cpu_is_pxa25x() && gpio > 85;
}
#else
#define __gpio_is_inverted(gpio) (0)
#endif
/* /*
* Configure pins for GPIO or other functions * Configure pins for GPIO or other functions
*/ */
...@@ -75,6 +99,9 @@ static int pxa_gpio_direction_input(struct gpio_chip *chip, unsigned offset) ...@@ -75,6 +99,9 @@ static int pxa_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
gpdr = pxa->regbase + GPDR_OFFSET; gpdr = pxa->regbase + GPDR_OFFSET;
local_irq_save(flags); local_irq_save(flags);
value = __raw_readl(gpdr); value = __raw_readl(gpdr);
if (__gpio_is_inverted(chip->base + offset))
value |= mask;
else
value &= ~mask; value &= ~mask;
__raw_writel(value, gpdr); __raw_writel(value, gpdr);
local_irq_restore(flags); local_irq_restore(flags);
...@@ -97,6 +124,9 @@ static int pxa_gpio_direction_output(struct gpio_chip *chip, ...@@ -97,6 +124,9 @@ static int pxa_gpio_direction_output(struct gpio_chip *chip,
gpdr = pxa->regbase + GPDR_OFFSET; gpdr = pxa->regbase + GPDR_OFFSET;
local_irq_save(flags); local_irq_save(flags);
tmp = __raw_readl(gpdr); tmp = __raw_readl(gpdr);
if (__gpio_is_inverted(chip->base + offset))
tmp &= ~mask;
else
tmp |= mask; tmp |= mask;
__raw_writel(tmp, gpdr); __raw_writel(tmp, gpdr);
local_irq_restore(flags); local_irq_restore(flags);
...@@ -173,9 +203,16 @@ static unsigned long GPIO_IRQ_mask[4]; ...@@ -173,9 +203,16 @@ static unsigned long GPIO_IRQ_mask[4];
*/ */
static int __gpio_is_occupied(unsigned gpio) static int __gpio_is_occupied(unsigned gpio)
{ {
if (cpu_is_pxa25x() || cpu_is_pxa27x()) if (cpu_is_pxa27x() || cpu_is_pxa25x()) {
return GAFR(gpio) & (0x3 << (((gpio) & 0xf) * 2)); int af = (GAFR(gpio) >> ((gpio & 0xf) * 2)) & 0x3;
int dir = GPDR(gpio) & GPIO_bit(gpio);
if (__gpio_is_inverted(gpio))
return af != 1 || dir == 0;
else else
return af != 0 || dir != 0;
}
return 0; return 0;
} }
...@@ -190,9 +227,8 @@ static int pxa_gpio_irq_type(unsigned int irq, unsigned int type) ...@@ -190,9 +227,8 @@ static int pxa_gpio_irq_type(unsigned int irq, unsigned int type)
/* Don't mess with enabled GPIOs using preconfigured edges or /* Don't mess with enabled GPIOs using preconfigured edges or
* GPIOs set to alternate function or to output during probe * GPIOs set to alternate function or to output during probe
*/ */
if ((GPIO_IRQ_rising_edge[idx] | if ((GPIO_IRQ_rising_edge[idx] & GPIO_bit(gpio)) ||
GPIO_IRQ_falling_edge[idx] | (GPIO_IRQ_falling_edge[idx] & GPIO_bit(gpio)))
GPDR(gpio)) & GPIO_bit(gpio))
return 0; return 0;
if (__gpio_is_occupied(gpio)) if (__gpio_is_occupied(gpio))
...@@ -201,6 +237,9 @@ static int pxa_gpio_irq_type(unsigned int irq, unsigned int type) ...@@ -201,6 +237,9 @@ static int pxa_gpio_irq_type(unsigned int irq, unsigned int type)
type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
} }
if (__gpio_is_inverted(gpio))
GPDR(gpio) |= GPIO_bit(gpio);
else
GPDR(gpio) &= ~GPIO_bit(gpio); GPDR(gpio) &= ~GPIO_bit(gpio);
if (type & IRQ_TYPE_EDGE_RISING) if (type & IRQ_TYPE_EDGE_RISING)
......
/*
* Hardware definitions for HP iPAQ h5xxx Handheld Computers
*
* Copyright 2000-2003 Hewlett-Packard Company.
* Copyright 2002 Jamey Hicks <jamey.hicks@hp.com>
* Copyright 2004-2005 Phil Blundell <pb@handhelds.org>
* Copyright 2007-2008 Anton Vorontsov <cbouatmailru@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
* AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
* FITNESS FOR ANY PARTICULAR PURPOSE.
*
* Author: Jamey Hicks.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/h5000.h>
#include <mach/pxa-regs.h>
#include <mach/pxa2xx-regs.h>
#include <mach/mfp-pxa25x.h>
#include <mach/udc.h>
#include "generic.h"
/*
* Flash
*/
static struct mtd_partition h5000_flash0_partitions[] = {
{
.name = "bootldr",
.size = 0x00040000,
.offset = 0,
.mask_flags = MTD_WRITEABLE,
},
{
.name = "root",
.size = MTDPART_SIZ_FULL,
.offset = MTDPART_OFS_APPEND,
},
};
static struct mtd_partition h5000_flash1_partitions[] = {
{
.name = "second root",
.size = SZ_16M - 0x00040000,
.offset = 0,
},
{
.name = "asset",
.size = MTDPART_SIZ_FULL,
.offset = MTDPART_OFS_APPEND,
.mask_flags = MTD_WRITEABLE,
},
};
static struct physmap_flash_data h5000_flash0_data = {
.width = 4,
.parts = h5000_flash0_partitions,
.nr_parts = ARRAY_SIZE(h5000_flash0_partitions),
};
static struct physmap_flash_data h5000_flash1_data = {
.width = 4,
.parts = h5000_flash1_partitions,
.nr_parts = ARRAY_SIZE(h5000_flash1_partitions),
};
static struct resource h5000_flash0_resources = {
.start = PXA_CS0_PHYS,
.end = PXA_CS0_PHYS + SZ_32M - 1,
.flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
};
static struct resource h5000_flash1_resources = {
.start = PXA_CS0_PHYS + SZ_32M,
.end = PXA_CS0_PHYS + SZ_32M + SZ_16M - 1,
.flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
};
static struct platform_device h5000_flash[] = {
{
.name = "physmap-flash",
.id = 0,
.resource = &h5000_flash0_resources,
.num_resources = 1,
.dev = {
.platform_data = &h5000_flash0_data,
},
},
{
.name = "physmap-flash",
.id = 1,
.resource = &h5000_flash1_resources,
.num_resources = 1,
.dev = {
.platform_data = &h5000_flash1_data,
},
},
};
/*
* USB Device Controller
*/
static struct pxa2xx_udc_mach_info h5000_udc_mach_info __initdata = {
.gpio_pullup = H5000_GPIO_USB_PULLUP,
};
/*
* GPIO setup
*/
static unsigned long h5000_pin_config[] __initdata = {
/* Crystal and Clock Signals */
GPIO12_32KHz,
/* SDRAM and Static Memory I/O Signals */
GPIO15_nCS_1,
GPIO78_nCS_2,
GPIO79_nCS_3,
GPIO80_nCS_4,
/* FFUART */
GPIO34_FFUART_RXD,
GPIO35_FFUART_CTS,
GPIO36_FFUART_DCD,
GPIO37_FFUART_DSR,
GPIO38_FFUART_RI,
GPIO39_FFUART_TXD,
GPIO40_FFUART_DTR,
GPIO41_FFUART_RTS,
/* BTUART */
GPIO42_BTUART_RXD,
GPIO43_BTUART_TXD,
GPIO44_BTUART_CTS,
GPIO45_BTUART_RTS,
/* SSP1 */
GPIO23_SSP1_SCLK,
GPIO25_SSP1_TXD,
GPIO26_SSP1_RXD,
};
/*
* Localbus setup:
* CS0: Flash;
* CS1: MediaQ chip, select 16-bit bus and vlio;
* CS5: SAMCOP.
*/
static void fix_msc(void)
{
MSC0 = 0x129c24f2;
MSC1 = 0x7ff424fa;
MSC2 = 0x7ff47ff4;
MDREFR |= 0x02080000;
}
/*
* Platform devices
*/
static struct platform_device *devices[] __initdata = {
&h5000_flash[0],
&h5000_flash[1],
};
static void __init h5000_init(void)
{
fix_msc();
pxa2xx_mfp_config(ARRAY_AND_SIZE(h5000_pin_config));
pxa_set_udc_info(&h5000_udc_mach_info);
platform_add_devices(ARRAY_AND_SIZE(devices));
}
MACHINE_START(H5400, "HP iPAQ H5000")
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.boot_params = 0xa0000100,
.map_io = pxa_map_io,
.init_irq = pxa25x_init_irq,
.timer = &pxa_timer,
.init_machine = h5000_init,
MACHINE_END
/*
* Hardware definitions for HP iPAQ h5xxx Handheld Computers
*
* Copyright(20)02 Hewlett-Packard Company.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
* AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
* FITNESS FOR ANY PARTICULAR PURPOSE.
*
* Author: Jamey Hicks
*/
#ifndef __ASM_ARCH_H5000_H
#define __ASM_ARCH_H5000_H
#include <mach/mfp-pxa25x.h>
/*
* CPU GPIOs
*/
#define H5000_GPIO_POWER_BUTTON (0)
#define H5000_GPIO_RESET_BUTTON_N (1)
#define H5000_GPIO_OPT_INT (2)
#define H5000_GPIO_BACKUP_POWER (3)
#define H5000_GPIO_ACTION_BUTTON (4)
#define H5000_GPIO_COM_DCD_SOMETHING (5) /* what is this really ? */
/* 6 not connected */
#define H5000_GPIO_RESET_BUTTON_AGAIN_N (7) /* connected to gpio 1 as well */
/* 8 not connected */
#define H5000_GPIO_RSO_N (9) /* reset output from max1702 which regulates 3.3 and 2.5 */
#define H5000_GPIO_ASIC_INT_N (10) /* from companion asic */
#define H5000_GPIO_BT_ENV_0 (11) /* to LMX9814, set to 1 according to regdump */
/*(12) not connected */
#define H5000_GPIO_BT_ENV_1 (13) /* to LMX9814, set to 1 according to regdump */
#define H5000_GPIO_BT_WU (14) /* from LMX9814, Defined as HOST_WAKEUP in the LMX9820 data sheet */
/*(15) is CS1# */
/*(16) not connected */
/*(17) not connected */
/*(18) is pcmcia ready */
/*(19) is dreq1 */
/*(20) is dreq0 */
#define H5000_GPIO_OE_RD_NWR (21) /* output enable on rd/nwr signal to companion asic */
/*(22) is not connected */
#define H5000_GPIO_OPT_SPI_CLK (23) /* to extension pack */
#define H5000_GPIO_OPT_SPI_CS_N (24) /* to extension pack */
#define H5000_GPIO_OPT_SPI_DOUT (25) /* to extension pack */
#define H5000_GPIO_OPT_SPI_DIN (26) /* to extension pack */
/*(27) not connected */
#define H5000_GPIO_I2S_BITCLK (28) /* connected to AC97 codec */
#define H5000_GPIO_I2S_DATAOUT (29) /* connected to AC97 codec */
#define H5000_GPIO_I2S_DATAIN (30) /* connected to AC97 codec */
#define H5000_GPIO_I2S_LRCLK (31) /* connected to AC97 codec */
#define H5000_GPIO_I2S_SYSCLK (32) /* connected to AC97 codec */
/*(33) is CS5# */
#define H5000_GPIO_COM_RXD (34) /* connected to cradle/cable connector */
#define H5000_GPIO_COM_CTS (35) /* connected to cradle/cable connector */
#define H5000_GPIO_COM_DCD (36) /* connected to cradle/cable connector */
#define H5000_GPIO_COM_DSR (37) /* connected to cradle/cable connector */
#define H5000_GPIO_COM_RI (38) /* connected to cradle/cable connector */
#define H5000_GPIO_COM_TXD (39) /* connected to cradle/cable connector */
#define H5000_GPIO_COM_DTR (40) /* connected to cradle/cable connector */
#define H5000_GPIO_COM_RTS (41) /* connected to cradle/cable connector */
#define H5000_GPIO_BT_RXD (42) /* connected to BT (LMX9814) */
#define H5000_GPIO_BT_TXD (43) /* connected to BT (LMX9814) */
#define H5000_GPIO_BT_CTS (44) /* connected to BT (LMX9814) */
#define H5000_GPIO_BT_RTS (45) /* connected to BT (LMX9814) */
#define H5000_GPIO_IRDA_RXD (46)
#define H5000_GPIO_IRDA_TXD (47)
#define H5000_GPIO_POE_N (48) /* used for pcmcia */
#define H5000_GPIO_PWE_N (49) /* used for pcmcia */
#define H5000_GPIO_PIOR_N (50) /* used for pcmcia */
#define H5000_GPIO_PIOW_N (51) /* used for pcmcia */
#define H5000_GPIO_PCE1_N (52) /* used for pcmcia */
#define H5000_GPIO_PCE2_N (53) /* used for pcmcia */
#define H5000_GPIO_PSKTSEL (54) /* used for pcmcia */
#define H5000_GPIO_PREG_N (55) /* used for pcmcia */
#define H5000_GPIO_PWAIT_N (56) /* used for pcmcia */
#define H5000_GPIO_IOIS16_N (57) /* used for pcmcia */
#define H5000_GPIO_IRDA_SD (58) /* to hsdl3002 sd */
/*(59) not connected */
#define H5000_GPIO_POWER_SD_N (60) /* controls power to SD */
#define H5000_GPIO_POWER_RS232_N (61) /* inverted FORCEON to rs232 transceiver */
#define H5000_GPIO_POWER_ACCEL_N (62) /* controls power to accel */
/*(63) is not connected */
#define H5000_GPIO_OPT_NVRAM (64) /* controls power to expansion pack */
#define H5000_GPIO_CHG_EN (65) /* to sc801 en */
#define H5000_GPIO_USB_PULLUP (66) /* USB d+ pullup via 1.5K resistor */
#define H5000_GPIO_BT_2V8_N (67) /* 2.8V used by bluetooth */
#define H5000_GPIO_EXT_CHG_RATE (68) /* enables external charging rate */
/*(69) is not connected */
#define H5000_GPIO_CIR_RESET (70) /* consumer IR reset */
#define H5000_GPIO_POWER_LIGHT_SENSOR_N (71)
#define H5000_GPIO_BT_M_RESET (72)
#define H5000_GPIO_STD_CHG_RATE (73)
#define H5000_GPIO_SD_WP_N (74)
#define H5000_GPIO_MOTOR_ON_N (75) /* external pullup on this */
#define H5000_GPIO_HEADPHONE_DETECT (76)
#define H5000_GPIO_USB_CHG_RATE (77) /* select rate for charging via usb */
/*(78) is CS2# */
/*(79) is CS3# */
/*(80) is CS4# */
#endif /* __ASM_ARCH_H5000_H */
...@@ -102,6 +102,9 @@ ...@@ -102,6 +102,9 @@
* PXA930 B0 0x69056835 0x5E643013 * PXA930 B0 0x69056835 0x5E643013
* PXA930 B1 0x69056837 0x7E643013 * PXA930 B1 0x69056837 0x7E643013
* PXA930 B2 0x69056838 0x8E643013 * PXA930 B2 0x69056838 0x8E643013
*
* PXA935 A0 0x56056931 0x1E653013
* PXA935 B0 0x56056936 0x6E653013
*/ */
#ifdef CONFIG_PXA25x #ifdef CONFIG_PXA25x
#define __cpu_is_pxa210(id) \ #define __cpu_is_pxa210(id) \
...@@ -184,6 +187,16 @@ ...@@ -184,6 +187,16 @@
#define __cpu_is_pxa930(id) (0) #define __cpu_is_pxa930(id) (0)
#endif #endif
#ifdef CONFIG_CPU_PXA935
#define __cpu_is_pxa935(id) \
({ \
unsigned int _id = (id) >> 4 & 0xfff; \
_id == 0x693; \
})
#else
#define __cpu_is_pxa935(id) (0)
#endif
#define cpu_is_pxa210() \ #define cpu_is_pxa210() \
({ \ ({ \
__cpu_is_pxa210(read_cpuid_id()); \ __cpu_is_pxa210(read_cpuid_id()); \
...@@ -204,8 +217,6 @@ ...@@ -204,8 +217,6 @@
__cpu_is_pxa25x(read_cpuid_id()); \ __cpu_is_pxa25x(read_cpuid_id()); \
}) })
extern int cpu_is_pxa26x(void);
#define cpu_is_pxa27x() \ #define cpu_is_pxa27x() \
({ \ ({ \
__cpu_is_pxa27x(read_cpuid_id()); \ __cpu_is_pxa27x(read_cpuid_id()); \
...@@ -232,6 +243,12 @@ extern int cpu_is_pxa26x(void); ...@@ -232,6 +243,12 @@ extern int cpu_is_pxa26x(void);
__cpu_is_pxa930(id); \ __cpu_is_pxa930(id); \
}) })
#define cpu_is_pxa935() \
({ \
unsigned int id = read_cpuid(CPUID_ID); \
__cpu_is_pxa935(id); \
})
/* /*
* CPUID Core Generation Bit * CPUID Core Generation Bit
* <= 0x2 for pxa21x/pxa25x/pxa26x/pxa27x * <= 0x2 for pxa21x/pxa25x/pxa26x/pxa27x
...@@ -249,6 +266,12 @@ extern int cpu_is_pxa26x(void); ...@@ -249,6 +266,12 @@ extern int cpu_is_pxa26x(void);
_id == 0x3; \ _id == 0x3; \
}) })
#define __cpu_is_pxa9xx(id) \
({ \
unsigned int _id = (id) >> 4 & 0xfff; \
_id == 0x683 || _id == 0x693; \
})
#define cpu_is_pxa2xx() \ #define cpu_is_pxa2xx() \
({ \ ({ \
__cpu_is_pxa2xx(read_cpuid_id()); \ __cpu_is_pxa2xx(read_cpuid_id()); \
...@@ -259,21 +282,10 @@ extern int cpu_is_pxa26x(void); ...@@ -259,21 +282,10 @@ extern int cpu_is_pxa26x(void);
__cpu_is_pxa3xx(read_cpuid_id()); \ __cpu_is_pxa3xx(read_cpuid_id()); \
}) })
/* #define cpu_is_pxa9xx() \
* Handy routine to set GPIO alternate functions ({ \
*/ __cpu_is_pxa9xx(read_cpuid_id()); \
extern int pxa_gpio_mode( int gpio_mode ); })
/*
* Return GPIO level, nonzero means high, zero is low
*/
extern int pxa_gpio_get_value(unsigned gpio);
/*
* Set output GPIO level
*/
extern void pxa_gpio_set_value(unsigned gpio, int value);
/* /*
* return current memory and LCD clock frequency in units of 10kHz * return current memory and LCD clock frequency in units of 10kHz
*/ */
......
...@@ -158,4 +158,35 @@ ...@@ -158,4 +158,35 @@
#define GPIO76_LCD_PCLK MFP_CFG_OUT(GPIO76, AF2, DRIVE_LOW) #define GPIO76_LCD_PCLK MFP_CFG_OUT(GPIO76, AF2, DRIVE_LOW)
#define GPIO77_LCD_BIAS MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW) #define GPIO77_LCD_BIAS MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW)
#ifdef CONFIG_CPU_PXA26x
/* GPIO */
#define GPIO85_GPIO MFP_CFG_IN(GPIO85, AF0)
#define GPIO86_GPIO MFP_CFG_IN(GPIO86, AF1)
#define GPIO87_GPIO MFP_CFG_IN(GPIO87, AF1)
#define GPIO88_GPIO MFP_CFG_IN(GPIO88, AF1)
#define GPIO89_GPIO MFP_CFG_IN(GPIO89, AF1)
/* SDRAM */
#define GPIO86_nSDCS2 MFP_CFG_OUT(GPIO86, AF0, DRIVE_HIGH)
#define GPIO87_nSDCS3 MFP_CFG_OUT(GPIO87, AF0, DRIVE_HIGH)
#define GPIO88_RDnWR MFP_CFG_OUT(GPIO88, AF0, DRIVE_HIGH)
#define GPIO89_nACRESET MFP_CFG_OUT(GPIO89, AF0, DRIVE_HIGH)
/* USB */
#define GPIO9_USB_RCV MFP_CFG_IN(GPIO9, AF1)
#define GPIO32_USB_VP MFP_CFG_IN(GPIO32, AF2)
#define GPIO34_USB_VM MFP_CFG_IN(GPIO34, AF2)
#define GPIO39_USB_VPO MFP_CFG_OUT(GPIO39, AF3, DRIVE_LOW)
#define GPIO56_USB_VMO MFP_CFG_OUT(GPIO56, AF1, DRIVE_LOW)
#define GPIO57_USB_nOE MFP_CFG_OUT(GPIO57, AF1, DRIVE_HIGH)
/* ASSP */
#define GPIO28_ASSP_BITCLK_IN MFP_CFG_IN(GPIO28, AF3)
#define GPIO28_ASSP_BITCLK_OUT MFP_CFG_OUT(GPIO28, AF3, DRIVE_LOW)
#define GPIO29_ASSP_RXD MFP_CFG_IN(GPIO29, AF3)
#define GPIO30_ASSP_TXD MFP_CFG_OUT(GPIO30, AF3, DRIVE_LOW)
#define GPIO31_ASSP_SFRM_IN MFP_CFG_IN(GPIO31, AF1)
#define GPIO31_ASSP_SFRM_OUT MFP_CFG_OUT(GPIO31, AF3, DRIVE_LOW)
#endif
#endif /* __ASM_ARCH_MFP_PXA25X_H */ #endif /* __ASM_ARCH_MFP_PXA25X_H */
...@@ -11,6 +11,12 @@ ...@@ -11,6 +11,12 @@
#include <mach/mfp.h> #include <mach/mfp.h>
#include <mach/mfp-pxa2xx.h> #include <mach/mfp-pxa2xx.h>
/* Note: GPIO3/GPIO4 will be driven by Power I2C when PCFR/PI2C_EN
* bit is set, regardless of the GPIO configuration
*/
#define GPIO3_GPIO MFP_CFG_IN(GPIO3, AF0)
#define GPIO4_GPIO MFP_CFG_IN(GPIO4, AF0)
/* GPIO */ /* GPIO */
#define GPIO85_GPIO MFP_CFG_IN(GPIO85, AF0) #define GPIO85_GPIO MFP_CFG_IN(GPIO85, AF0)
#define GPIO86_GPIO MFP_CFG_IN(GPIO86, AF0) #define GPIO86_GPIO MFP_CFG_IN(GPIO86, AF0)
......
...@@ -10,12 +10,14 @@ ...@@ -10,12 +10,14 @@
(MFP_PIN(pin) | MFP_##af | MFP_DIR_OUT | MFP_LPM_##state)) (MFP_PIN(pin) | MFP_##af | MFP_DIR_OUT | MFP_LPM_##state))
/* Global GPIOs */ /* Global GPIOs */
#define GPIO9_CHARGE_nEN 9 #define GPIO9_CHARGE_EN 9
#define GPIO18_POWEROFF 18 #define GPIO18_POWEROFF 18
#define GPIO87_LCD_POWER 87 #define GPIO87_LCD_POWER 87
#define GPIO96_AC_DETECT 96
#define GPIO80_MAYBE_CHARGE_VDROP 80 /* Drop of 88mV */
/* USB */ /* USB */
#define GPIO13_USB_DETECT 13 #define GPIO13_nUSB_DETECT 13
#define GPIO22_USB_ENABLE 22 #define GPIO22_USB_ENABLE 22
/* SDIO bits */ /* SDIO bits */
...@@ -24,7 +26,10 @@ ...@@ -24,7 +26,10 @@
#define GPIO91_SDIO_EN 91 #define GPIO91_SDIO_EN 91
/* Bluetooth */ /* Bluetooth */
#define GPIO14_BT_nACTIVITY 14
#define GPIO83_BT_ON 83 #define GPIO83_BT_ON 83
#define GPIO77_BT_UNKNOWN1 77
#define GPIO86_BT_MAYBE_nRESET 86
/* GPS */ /* GPS */
#define GPIO23_GPS_UNKNOWN1 23 #define GPIO23_GPS_UNKNOWN1 23
......
This diff is collapsed.
...@@ -365,4 +365,9 @@ ...@@ -365,4 +365,9 @@
#define GPIO117_I2CSCL_MD (117 | GPIO_ALT_FN_1_IN) #define GPIO117_I2CSCL_MD (117 | GPIO_ALT_FN_1_IN)
#define GPIO118_I2CSDA_MD (118 | GPIO_ALT_FN_1_IN) #define GPIO118_I2CSDA_MD (118 | GPIO_ALT_FN_1_IN)
/*
* Handy routine to set GPIO alternate functions
*/
extern int pxa_gpio_mode( int gpio_mode );
#endif /* __ASM_ARCH_PXA2XX_GPIO_H */ #endif /* __ASM_ARCH_PXA2XX_GPIO_H */
...@@ -49,6 +49,11 @@ ...@@ -49,6 +49,11 @@
#define MECR_NOS (1 << 0) /* Number Of Sockets: 0 -> 1 sock, 1 -> 2 sock */ #define MECR_NOS (1 << 0) /* Number Of Sockets: 0 -> 1 sock, 1 -> 2 sock */
#define MECR_CIT (1 << 1) /* Card Is There: 0 -> no card, 1 -> card inserted */ #define MECR_CIT (1 << 1) /* Card Is There: 0 -> no card, 1 -> card inserted */
#define MDCNFG_DE0 (1 << 0) /* SDRAM Bank 0 Enable */
#define MDCNFG_DE1 (1 << 1) /* SDRAM Bank 1 Enable */
#define MDCNFG_DE2 (1 << 16) /* SDRAM Bank 2 Enable */
#define MDCNFG_DE3 (1 << 17) /* SDRAM Bank 3 Enable */
#define MDREFR_K0DB4 (1 << 29) /* SDCLK0 Divide by 4 Control/Status */ #define MDREFR_K0DB4 (1 << 29) /* SDCLK0 Divide by 4 Control/Status */
#define MDREFR_K2FREE (1 << 25) /* SDRAM Free-Running Control */ #define MDREFR_K2FREE (1 << 25) /* SDRAM Free-Running Control */
#define MDREFR_K1FREE (1 << 24) /* SDRAM Free-Running Control */ #define MDREFR_K1FREE (1 << 24) /* SDRAM Free-Running Control */
...@@ -243,4 +248,11 @@ ...@@ -243,4 +248,11 @@
#define OSCC_OON (1 << 1) /* 32.768kHz OON (write-once only bit) */ #define OSCC_OON (1 << 1) /* 32.768kHz OON (write-once only bit) */
#define OSCC_OOK (1 << 0) /* 32.768kHz OOK (read-only bit) */ #define OSCC_OOK (1 << 0) /* 32.768kHz OOK (read-only bit) */
/* PWRMODE register M field values */
#define PWRMODE_IDLE 0x1
#define PWRMODE_STANDBY 0x2
#define PWRMODE_SLEEP 0x3
#define PWRMODE_DEEPSLEEP 0x7
#endif #endif
#ifndef __ASM_ARCH_REGS_AC97_H
#define __ASM_ARCH_REGS_AC97_H
/*
* AC97 Controller registers
*/
#define POCR __REG(0x40500000) /* PCM Out Control Register */
#define POCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */
#define POCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */
#define PICR __REG(0x40500004) /* PCM In Control Register */
#define PICR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */
#define PICR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */
#define MCCR __REG(0x40500008) /* Mic In Control Register */
#define MCCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */
#define MCCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */
#define GCR __REG(0x4050000C) /* Global Control Register */
#ifdef CONFIG_PXA3xx
#define GCR_CLKBPB (1 << 31) /* Internal clock enable */
#endif
#define GCR_nDMAEN (1 << 24) /* non DMA Enable */
#define GCR_CDONE_IE (1 << 19) /* Command Done Interrupt Enable */
#define GCR_SDONE_IE (1 << 18) /* Status Done Interrupt Enable */
#define GCR_SECRDY_IEN (1 << 9) /* Secondary Ready Interrupt Enable */
#define GCR_PRIRDY_IEN (1 << 8) /* Primary Ready Interrupt Enable */
#define GCR_SECRES_IEN (1 << 5) /* Secondary Resume Interrupt Enable */
#define GCR_PRIRES_IEN (1 << 4) /* Primary Resume Interrupt Enable */
#define GCR_ACLINK_OFF (1 << 3) /* AC-link Shut Off */
#define GCR_WARM_RST (1 << 2) /* AC97 Warm Reset */
#define GCR_COLD_RST (1 << 1) /* AC'97 Cold Reset (0 = active) */
#define GCR_GIE (1 << 0) /* Codec GPI Interrupt Enable */
#define POSR __REG(0x40500010) /* PCM Out Status Register */
#define POSR_FIFOE (1 << 4) /* FIFO error */
#define POSR_FSR (1 << 2) /* FIFO Service Request */
#define PISR __REG(0x40500014) /* PCM In Status Register */
#define PISR_FIFOE (1 << 4) /* FIFO error */
#define PISR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */
#define PISR_FSR (1 << 2) /* FIFO Service Request */
#define MCSR __REG(0x40500018) /* Mic In Status Register */
#define MCSR_FIFOE (1 << 4) /* FIFO error */
#define MCSR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */
#define MCSR_FSR (1 << 2) /* FIFO Service Request */
#define GSR __REG(0x4050001C) /* Global Status Register */
#define GSR_CDONE (1 << 19) /* Command Done */
#define GSR_SDONE (1 << 18) /* Status Done */
#define GSR_RDCS (1 << 15) /* Read Completion Status */
#define GSR_BIT3SLT12 (1 << 14) /* Bit 3 of slot 12 */
#define GSR_BIT2SLT12 (1 << 13) /* Bit 2 of slot 12 */
#define GSR_BIT1SLT12 (1 << 12) /* Bit 1 of slot 12 */
#define GSR_SECRES (1 << 11) /* Secondary Resume Interrupt */
#define GSR_PRIRES (1 << 10) /* Primary Resume Interrupt */
#define GSR_SCR (1 << 9) /* Secondary Codec Ready */
#define GSR_PCR (1 << 8) /* Primary Codec Ready */
#define GSR_MCINT (1 << 7) /* Mic In Interrupt */
#define GSR_POINT (1 << 6) /* PCM Out Interrupt */
#define GSR_PIINT (1 << 5) /* PCM In Interrupt */
#define GSR_ACOFFD (1 << 3) /* AC-link Shut Off Done */
#define GSR_MOINT (1 << 2) /* Modem Out Interrupt */
#define GSR_MIINT (1 << 1) /* Modem In Interrupt */
#define GSR_GSCI (1 << 0) /* Codec GPI Status Change Interrupt */
#define CAR __REG(0x40500020) /* CODEC Access Register */
#define CAR_CAIP (1 << 0) /* Codec Access In Progress */
#define PCDR __REG(0x40500040) /* PCM FIFO Data Register */
#define MCDR __REG(0x40500060) /* Mic-in FIFO Data Register */
#define MOCR __REG(0x40500100) /* Modem Out Control Register */
#define MOCR_FEIE (1 << 3) /* FIFO Error */
#define MOCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */
#define MICR __REG(0x40500108) /* Modem In Control Register */
#define MICR_FEIE (1 << 3) /* FIFO Error */
#define MICR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */
#define MOSR __REG(0x40500110) /* Modem Out Status Register */
#define MOSR_FIFOE (1 << 4) /* FIFO error */
#define MOSR_FSR (1 << 2) /* FIFO Service Request */
#define MISR __REG(0x40500118) /* Modem In Status Register */
#define MISR_FIFOE (1 << 4) /* FIFO error */
#define MISR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */
#define MISR_FSR (1 << 2) /* FIFO Service Request */
#define MODR __REG(0x40500140) /* Modem FIFO Data Register */
#define PAC_REG_BASE __REG(0x40500200) /* Primary Audio Codec */
#define SAC_REG_BASE __REG(0x40500300) /* Secondary Audio Codec */
#define PMC_REG_BASE __REG(0x40500400) /* Primary Modem Codec */
#define SMC_REG_BASE __REG(0x40500500) /* Secondary Modem Codec */
#endif /* __ASM_ARCH_REGS_AC97_H */
#ifndef __ASM_ARCH_REGS_UART_H
#define __ASM_ARCH_REGS_UART_H
/*
* UARTs
*/
/* Full Function UART (FFUART) */
#define FFUART FFRBR
#define FFRBR __REG(0x40100000) /* Receive Buffer Register (read only) */
#define FFTHR __REG(0x40100000) /* Transmit Holding Register (write only) */
#define FFIER __REG(0x40100004) /* Interrupt Enable Register (read/write) */
#define FFIIR __REG(0x40100008) /* Interrupt ID Register (read only) */
#define FFFCR __REG(0x40100008) /* FIFO Control Register (write only) */
#define FFLCR __REG(0x4010000C) /* Line Control Register (read/write) */
#define FFMCR __REG(0x40100010) /* Modem Control Register (read/write) */
#define FFLSR __REG(0x40100014) /* Line Status Register (read only) */
#define FFMSR __REG(0x40100018) /* Modem Status Register (read only) */
#define FFSPR __REG(0x4010001C) /* Scratch Pad Register (read/write) */
#define FFISR __REG(0x40100020) /* Infrared Selection Register (read/write) */
#define FFDLL __REG(0x40100000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */
#define FFDLH __REG(0x40100004) /* Divisor Latch High Register (DLAB = 1) (read/write) */
/* Bluetooth UART (BTUART) */
#define BTUART BTRBR
#define BTRBR __REG(0x40200000) /* Receive Buffer Register (read only) */
#define BTTHR __REG(0x40200000) /* Transmit Holding Register (write only) */
#define BTIER __REG(0x40200004) /* Interrupt Enable Register (read/write) */
#define BTIIR __REG(0x40200008) /* Interrupt ID Register (read only) */
#define BTFCR __REG(0x40200008) /* FIFO Control Register (write only) */
#define BTLCR __REG(0x4020000C) /* Line Control Register (read/write) */
#define BTMCR __REG(0x40200010) /* Modem Control Register (read/write) */
#define BTLSR __REG(0x40200014) /* Line Status Register (read only) */
#define BTMSR __REG(0x40200018) /* Modem Status Register (read only) */
#define BTSPR __REG(0x4020001C) /* Scratch Pad Register (read/write) */
#define BTISR __REG(0x40200020) /* Infrared Selection Register (read/write) */
#define BTDLL __REG(0x40200000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */
#define BTDLH __REG(0x40200004) /* Divisor Latch High Register (DLAB = 1) (read/write) */
/* Standard UART (STUART) */
#define STUART STRBR
#define STRBR __REG(0x40700000) /* Receive Buffer Register (read only) */
#define STTHR __REG(0x40700000) /* Transmit Holding Register (write only) */
#define STIER __REG(0x40700004) /* Interrupt Enable Register (read/write) */
#define STIIR __REG(0x40700008) /* Interrupt ID Register (read only) */
#define STFCR __REG(0x40700008) /* FIFO Control Register (write only) */
#define STLCR __REG(0x4070000C) /* Line Control Register (read/write) */
#define STMCR __REG(0x40700010) /* Modem Control Register (read/write) */
#define STLSR __REG(0x40700014) /* Line Status Register (read only) */
#define STMSR __REG(0x40700018) /* Reserved */
#define STSPR __REG(0x4070001C) /* Scratch Pad Register (read/write) */
#define STISR __REG(0x40700020) /* Infrared Selection Register (read/write) */
#define STDLL __REG(0x40700000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */
#define STDLH __REG(0x40700004) /* Divisor Latch High Register (DLAB = 1) (read/write) */
/* Hardware UART (HWUART) */
#define HWUART HWRBR
#define HWRBR __REG(0x41600000) /* Receive Buffer Register (read only) */
#define HWTHR __REG(0x41600000) /* Transmit Holding Register (write only) */
#define HWIER __REG(0x41600004) /* Interrupt Enable Register (read/write) */
#define HWIIR __REG(0x41600008) /* Interrupt ID Register (read only) */
#define HWFCR __REG(0x41600008) /* FIFO Control Register (write only) */
#define HWLCR __REG(0x4160000C) /* Line Control Register (read/write) */
#define HWMCR __REG(0x41600010) /* Modem Control Register (read/write) */
#define HWLSR __REG(0x41600014) /* Line Status Register (read only) */
#define HWMSR __REG(0x41600018) /* Modem Status Register (read only) */
#define HWSPR __REG(0x4160001C) /* Scratch Pad Register (read/write) */
#define HWISR __REG(0x41600020) /* Infrared Selection Register (read/write) */
#define HWFOR __REG(0x41600024) /* Receive FIFO Occupancy Register (read only) */
#define HWABR __REG(0x41600028) /* Auto-Baud Control Register (read/write) */
#define HWACR __REG(0x4160002C) /* Auto-Baud Count Register (read only) */
#define HWDLL __REG(0x41600000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */
#define HWDLH __REG(0x41600004) /* Divisor Latch High Register (DLAB = 1) (read/write) */
#define IER_DMAE (1 << 7) /* DMA Requests Enable */
#define IER_UUE (1 << 6) /* UART Unit Enable */
#define IER_NRZE (1 << 5) /* NRZ coding Enable */
#define IER_RTIOE (1 << 4) /* Receiver Time Out Interrupt Enable */
#define IER_MIE (1 << 3) /* Modem Interrupt Enable */
#define IER_RLSE (1 << 2) /* Receiver Line Status Interrupt Enable */
#define IER_TIE (1 << 1) /* Transmit Data request Interrupt Enable */
#define IER_RAVIE (1 << 0) /* Receiver Data Available Interrupt Enable */
#define IIR_FIFOES1 (1 << 7) /* FIFO Mode Enable Status */
#define IIR_FIFOES0 (1 << 6) /* FIFO Mode Enable Status */
#define IIR_TOD (1 << 3) /* Time Out Detected */
#define IIR_IID2 (1 << 2) /* Interrupt Source Encoded */
#define IIR_IID1 (1 << 1) /* Interrupt Source Encoded */
#define IIR_IP (1 << 0) /* Interrupt Pending (active low) */
#define FCR_ITL2 (1 << 7) /* Interrupt Trigger Level */
#define FCR_ITL1 (1 << 6) /* Interrupt Trigger Level */
#define FCR_RESETTF (1 << 2) /* Reset Transmitter FIFO */
#define FCR_RESETRF (1 << 1) /* Reset Receiver FIFO */
#define FCR_TRFIFOE (1 << 0) /* Transmit and Receive FIFO Enable */
#define FCR_ITL_1 (0)
#define FCR_ITL_8 (FCR_ITL1)
#define FCR_ITL_16 (FCR_ITL2)
#define FCR_ITL_32 (FCR_ITL2|FCR_ITL1)
#define LCR_DLAB (1 << 7) /* Divisor Latch Access Bit */
#define LCR_SB (1 << 6) /* Set Break */
#define LCR_STKYP (1 << 5) /* Sticky Parity */
#define LCR_EPS (1 << 4) /* Even Parity Select */
#define LCR_PEN (1 << 3) /* Parity Enable */
#define LCR_STB (1 << 2) /* Stop Bit */
#define LCR_WLS1 (1 << 1) /* Word Length Select */
#define LCR_WLS0 (1 << 0) /* Word Length Select */
#define LSR_FIFOE (1 << 7) /* FIFO Error Status */
#define LSR_TEMT (1 << 6) /* Transmitter Empty */
#define LSR_TDRQ (1 << 5) /* Transmit Data Request */
#define LSR_BI (1 << 4) /* Break Interrupt */
#define LSR_FE (1 << 3) /* Framing Error */
#define LSR_PE (1 << 2) /* Parity Error */
#define LSR_OE (1 << 1) /* Overrun Error */
#define LSR_DR (1 << 0) /* Data Ready */
#define MCR_LOOP (1 << 4)
#define MCR_OUT2 (1 << 3) /* force MSR_DCD in loopback mode */
#define MCR_OUT1 (1 << 2) /* force MSR_RI in loopback mode */
#define MCR_RTS (1 << 1) /* Request to Send */
#define MCR_DTR (1 << 0) /* Data Terminal Ready */
#define MSR_DCD (1 << 7) /* Data Carrier Detect */
#define MSR_RI (1 << 6) /* Ring Indicator */
#define MSR_DSR (1 << 5) /* Data Set Ready */
#define MSR_CTS (1 << 4) /* Clear To Send */
#define MSR_DDCD (1 << 3) /* Delta Data Carrier Detect */
#define MSR_TERI (1 << 2) /* Trailing Edge Ring Indicator */
#define MSR_DDSR (1 << 1) /* Delta Data Set Ready */
#define MSR_DCTS (1 << 0) /* Delta Clear To Send */
/*
* IrSR (Infrared Selection Register)
*/
#define STISR_RXPL (1 << 4) /* Receive Data Polarity */
#define STISR_TXPL (1 << 3) /* Transmit Data Polarity */
#define STISR_XMODE (1 << 2) /* Transmit Pulse Width Select */
#define STISR_RCVEIR (1 << 1) /* Receiver SIR Enable */
#define STISR_XMITIR (1 << 0) /* Transmitter SIR Enable */
#endif /* __ASM_ARCH_REGS_UART_H */
...@@ -10,7 +10,7 @@ ...@@ -10,7 +10,7 @@
*/ */
#include <linux/serial_reg.h> #include <linux/serial_reg.h>
#include <mach/pxa-regs.h> #include <mach/regs-uart.h>
#include <asm/mach-types.h> #include <asm/mach-types.h>
#define __REG(x) ((volatile unsigned long *)x) #define __REG(x) ((volatile unsigned long *)x)
......
...@@ -20,6 +20,7 @@ ...@@ -20,6 +20,7 @@
#include <linux/delay.h> #include <linux/delay.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/clk.h> #include <linux/clk.h>
#include <linux/gpio.h>
#include <linux/spi/spi.h> #include <linux/spi/spi.h>
#include <linux/smc91x.h> #include <linux/smc91x.h>
...@@ -36,7 +37,6 @@ ...@@ -36,7 +37,6 @@
#include <mach/pxa-regs.h> #include <mach/pxa-regs.h>
#include <mach/mfp-pxa300.h> #include <mach/mfp-pxa300.h>
#include <mach/gpio.h>
#include <mach/pxafb.h> #include <mach/pxafb.h>
#include <mach/ssp.h> #include <mach/ssp.h>
#include <mach/pxa2xx_spi.h> #include <mach/pxa2xx_spi.h>
......
...@@ -123,6 +123,10 @@ static unsigned long magician_pin_config[] __initdata = { ...@@ -123,6 +123,10 @@ static unsigned long magician_pin_config[] __initdata = {
GPIO107_GPIO, /* DS1WM_IRQ */ GPIO107_GPIO, /* DS1WM_IRQ */
GPIO108_GPIO, /* GSM_READY */ GPIO108_GPIO, /* GSM_READY */
GPIO115_GPIO, /* nPEN_IRQ */ GPIO115_GPIO, /* nPEN_IRQ */
/* I2C */
GPIO117_I2C_SCL,
GPIO118_I2C_SDA,
}; };
/* /*
......
...@@ -128,6 +128,10 @@ static unsigned long mainstone_pin_config[] = { ...@@ -128,6 +128,10 @@ static unsigned long mainstone_pin_config[] = {
GPIO108_KP_MKOUT_5, GPIO108_KP_MKOUT_5,
GPIO96_KP_MKOUT_6, GPIO96_KP_MKOUT_6,
/* I2C */
GPIO117_I2C_SCL,
GPIO118_I2C_SDA,
/* GPIO */ /* GPIO */
GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH, GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
}; };
......
...@@ -38,12 +38,13 @@ struct gpio_desc { ...@@ -38,12 +38,13 @@ struct gpio_desc {
unsigned valid : 1; unsigned valid : 1;
unsigned can_wakeup : 1; unsigned can_wakeup : 1;
unsigned keypad_gpio : 1; unsigned keypad_gpio : 1;
unsigned dir_inverted : 1;
unsigned int mask; /* bit mask in PWER or PKWR */ unsigned int mask; /* bit mask in PWER or PKWR */
unsigned int mux_mask; /* bit mask of muxed gpio bits, 0 if no mux */
unsigned long config; unsigned long config;
}; };
static struct gpio_desc gpio_desc[MFP_PIN_GPIO127 + 1]; static struct gpio_desc gpio_desc[MFP_PIN_GPIO127 + 1];
static int gpio_nr;
static unsigned long gpdr_lpm[4]; static unsigned long gpdr_lpm[4];
...@@ -54,7 +55,7 @@ static int __mfp_config_gpio(unsigned gpio, unsigned long c) ...@@ -54,7 +55,7 @@ static int __mfp_config_gpio(unsigned gpio, unsigned long c)
int uorl = !!(gpio & 0x10); /* GAFRx_U or GAFRx_L ? */ int uorl = !!(gpio & 0x10); /* GAFRx_U or GAFRx_L ? */
int shft = (gpio & 0xf) << 1; int shft = (gpio & 0xf) << 1;
int fn = MFP_AF(c); int fn = MFP_AF(c);
int dir = c & MFP_DIR_OUT; int is_out = (c & MFP_DIR_OUT) ? 1 : 0;
if (fn > 3) if (fn > 3)
return -EINVAL; return -EINVAL;
...@@ -68,7 +69,7 @@ static int __mfp_config_gpio(unsigned gpio, unsigned long c) ...@@ -68,7 +69,7 @@ static int __mfp_config_gpio(unsigned gpio, unsigned long c)
else else
GAFR_U(bank) = gafr; GAFR_U(bank) = gafr;
if (dir == MFP_DIR_OUT) if (is_out ^ gpio_desc[gpio].dir_inverted)
GPDR(gpio) |= mask; GPDR(gpio) |= mask;
else else
GPDR(gpio) &= ~mask; GPDR(gpio) &= ~mask;
...@@ -77,11 +78,11 @@ static int __mfp_config_gpio(unsigned gpio, unsigned long c) ...@@ -77,11 +78,11 @@ static int __mfp_config_gpio(unsigned gpio, unsigned long c)
switch (c & MFP_LPM_STATE_MASK) { switch (c & MFP_LPM_STATE_MASK) {
case MFP_LPM_DRIVE_HIGH: case MFP_LPM_DRIVE_HIGH:
PGSR(bank) |= mask; PGSR(bank) |= mask;
dir = MFP_DIR_OUT; is_out = 1;
break; break;
case MFP_LPM_DRIVE_LOW: case MFP_LPM_DRIVE_LOW:
PGSR(bank) &= ~mask; PGSR(bank) &= ~mask;
dir = MFP_DIR_OUT; is_out = 1;
break; break;
case MFP_LPM_DEFAULT: case MFP_LPM_DEFAULT:
break; break;
...@@ -92,7 +93,7 @@ static int __mfp_config_gpio(unsigned gpio, unsigned long c) ...@@ -92,7 +93,7 @@ static int __mfp_config_gpio(unsigned gpio, unsigned long c)
break; break;
} }
if (dir == MFP_DIR_OUT) if (is_out ^ gpio_desc[gpio].dir_inverted)
gpdr_lpm[bank] |= mask; gpdr_lpm[bank] |= mask;
else else
gpdr_lpm[bank] &= ~mask; gpdr_lpm[bank] &= ~mask;
...@@ -106,7 +107,7 @@ static int __mfp_config_gpio(unsigned gpio, unsigned long c) ...@@ -106,7 +107,7 @@ static int __mfp_config_gpio(unsigned gpio, unsigned long c)
return -EINVAL; return -EINVAL;
} }
if ((c & MFP_LPM_CAN_WAKEUP) && (dir == MFP_DIR_OUT)) { if ((c & MFP_LPM_CAN_WAKEUP) && is_out) {
pr_warning("%s: output GPIO%d unable to wakeup\n", pr_warning("%s: output GPIO%d unable to wakeup\n",
__func__, gpio); __func__, gpio);
return -EINVAL; return -EINVAL;
...@@ -169,7 +170,7 @@ void pxa2xx_mfp_set_lpm(int mfp, unsigned long lpm) ...@@ -169,7 +170,7 @@ void pxa2xx_mfp_set_lpm(int mfp, unsigned long lpm)
int gpio_set_wake(unsigned int gpio, unsigned int on) int gpio_set_wake(unsigned int gpio, unsigned int on)
{ {
struct gpio_desc *d; struct gpio_desc *d;
unsigned long c; unsigned long c, mux_taken;
if (gpio > mfp_to_gpio(MFP_PIN_GPIO127)) if (gpio > mfp_to_gpio(MFP_PIN_GPIO127))
return -EINVAL; return -EINVAL;
...@@ -183,9 +184,13 @@ int gpio_set_wake(unsigned int gpio, unsigned int on) ...@@ -183,9 +184,13 @@ int gpio_set_wake(unsigned int gpio, unsigned int on)
if (d->keypad_gpio) if (d->keypad_gpio)
return -EINVAL; return -EINVAL;
mux_taken = (PWER & d->mux_mask) & (~d->mask);
if (on && mux_taken)
return -EBUSY;
if (d->can_wakeup && (c & MFP_LPM_CAN_WAKEUP)) { if (d->can_wakeup && (c & MFP_LPM_CAN_WAKEUP)) {
if (on) { if (on) {
PWER |= d->mask; PWER = (PWER & ~d->mux_mask) | d->mask;
if (c & MFP_LPM_EDGE_RISE) if (c & MFP_LPM_EDGE_RISE)
PRER |= d->mask; PRER |= d->mask;
...@@ -210,7 +215,7 @@ static void __init pxa25x_mfp_init(void) ...@@ -210,7 +215,7 @@ static void __init pxa25x_mfp_init(void)
{ {
int i; int i;
for (i = 0; i <= 84; i++) for (i = 0; i <= pxa_last_gpio; i++)
gpio_desc[i].valid = 1; gpio_desc[i].valid = 1;
for (i = 0; i <= 15; i++) { for (i = 0; i <= 15; i++) {
...@@ -218,7 +223,11 @@ static void __init pxa25x_mfp_init(void) ...@@ -218,7 +223,11 @@ static void __init pxa25x_mfp_init(void)
gpio_desc[i].mask = GPIO_bit(i); gpio_desc[i].mask = GPIO_bit(i);
} }
gpio_nr = 85; /* PXA26x has additional 4 GPIOs (86/87/88/89) which has the
* direction bit inverted in GPDR2. See PXA26x DM 4.1.1.
*/
for (i = 86; i <= pxa_last_gpio; i++)
gpio_desc[i].dir_inverted = 1;
} }
#else #else
static inline void pxa25x_mfp_init(void) {} static inline void pxa25x_mfp_init(void) {}
...@@ -251,11 +260,27 @@ int keypad_set_wake(unsigned int on) ...@@ -251,11 +260,27 @@ int keypad_set_wake(unsigned int on)
return 0; return 0;
} }
#define PWER_WEMUX2_GPIO38 (1 << 16)
#define PWER_WEMUX2_GPIO53 (2 << 16)
#define PWER_WEMUX2_GPIO40 (3 << 16)
#define PWER_WEMUX2_GPIO36 (4 << 16)
#define PWER_WEMUX2_MASK (7 << 16)
#define PWER_WEMUX3_GPIO31 (1 << 19)
#define PWER_WEMUX3_GPIO113 (2 << 19)
#define PWER_WEMUX3_MASK (3 << 19)
#define INIT_GPIO_DESC_MUXED(mux, gpio) \
do { \
gpio_desc[(gpio)].can_wakeup = 1; \
gpio_desc[(gpio)].mask = PWER_ ## mux ## _GPIO ##gpio; \
gpio_desc[(gpio)].mux_mask = PWER_ ## mux ## _MASK; \
} while (0)
static void __init pxa27x_mfp_init(void) static void __init pxa27x_mfp_init(void)
{ {
int i, gpio; int i, gpio;
for (i = 0; i <= 120; i++) { for (i = 0; i <= pxa_last_gpio; i++) {
/* skip GPIO2, 5, 6, 7, 8, they are not /* skip GPIO2, 5, 6, 7, 8, they are not
* valid pins allow configuration * valid pins allow configuration
*/ */
...@@ -286,7 +311,12 @@ static void __init pxa27x_mfp_init(void) ...@@ -286,7 +311,12 @@ static void __init pxa27x_mfp_init(void)
gpio_desc[35].can_wakeup = 1; gpio_desc[35].can_wakeup = 1;
gpio_desc[35].mask = PWER_WE35; gpio_desc[35].mask = PWER_WE35;
gpio_nr = 121; INIT_GPIO_DESC_MUXED(WEMUX3, 31);
INIT_GPIO_DESC_MUXED(WEMUX3, 113);
INIT_GPIO_DESC_MUXED(WEMUX2, 38);
INIT_GPIO_DESC_MUXED(WEMUX2, 53);
INIT_GPIO_DESC_MUXED(WEMUX2, 40);
INIT_GPIO_DESC_MUXED(WEMUX2, 36);
} }
#else #else
static inline void pxa27x_mfp_init(void) {} static inline void pxa27x_mfp_init(void) {}
...@@ -300,7 +330,7 @@ static int pxa2xx_mfp_suspend(struct sys_device *d, pm_message_t state) ...@@ -300,7 +330,7 @@ static int pxa2xx_mfp_suspend(struct sys_device *d, pm_message_t state)
{ {
int i; int i;
for (i = 0; i <= gpio_to_bank(gpio_nr); i++) { for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++) {
saved_gafr[0][i] = GAFR_L(i); saved_gafr[0][i] = GAFR_L(i);
saved_gafr[1][i] = GAFR_U(i); saved_gafr[1][i] = GAFR_U(i);
...@@ -315,7 +345,7 @@ static int pxa2xx_mfp_resume(struct sys_device *d) ...@@ -315,7 +345,7 @@ static int pxa2xx_mfp_resume(struct sys_device *d)
{ {
int i; int i;
for (i = 0; i <= gpio_to_bank(gpio_nr); i++) { for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++) {
GAFR_L(i) = saved_gafr[0][i]; GAFR_L(i) = saved_gafr[0][i];
GAFR_U(i) = saved_gafr[1][i]; GAFR_U(i) = saved_gafr[1][i];
GPDR(i * 32) = saved_gpdr[i]; GPDR(i * 32) = saved_gpdr[i];
...@@ -348,7 +378,7 @@ static int __init pxa2xx_mfp_init(void) ...@@ -348,7 +378,7 @@ static int __init pxa2xx_mfp_init(void)
pxa27x_mfp_init(); pxa27x_mfp_init();
/* initialize gafr_run[], pgsr_lpm[] from existing values */ /* initialize gafr_run[], pgsr_lpm[] from existing values */
for (i = 0; i <= gpio_to_bank(gpio_nr); i++) for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++)
gpdr_lpm[i] = GPDR(i * 32); gpdr_lpm[i] = GPDR(i * 32);
return sysdev_class_register(&pxa2xx_mfp_sysclass); return sysdev_class_register(&pxa2xx_mfp_sysclass);
......
...@@ -34,7 +34,7 @@ ...@@ -34,7 +34,7 @@
#include <linux/irq.h> #include <linux/irq.h>
#include <linux/pda_power.h> #include <linux/pda_power.h>
#include <linux/power_supply.h> #include <linux/power_supply.h>
#include <linux/wm97xx.h> #include <linux/wm97xx_batt.h>
#include <linux/mtd/physmap.h> #include <linux/mtd/physmap.h>
#include <asm/mach-types.h> #include <asm/mach-types.h>
...@@ -46,6 +46,9 @@ ...@@ -46,6 +46,9 @@
#include <mach/mmc.h> #include <mach/mmc.h>
#include <mach/udc.h> #include <mach/udc.h>
#include <mach/pxa27x-udc.h> #include <mach/pxa27x-udc.h>
#include <mach/i2c.h>
#include <mach/camera.h>
#include <media/soc_camera.h>
#include <mach/mioa701.h> #include <mach/mioa701.h>
...@@ -54,10 +57,11 @@ ...@@ -54,10 +57,11 @@
static unsigned long mioa701_pin_config[] = { static unsigned long mioa701_pin_config[] = {
/* Mio global */ /* Mio global */
MIO_CFG_OUT(GPIO9_CHARGE_nEN, AF0, DRIVE_LOW), MIO_CFG_OUT(GPIO9_CHARGE_EN, AF0, DRIVE_LOW),
MIO_CFG_OUT(GPIO18_POWEROFF, AF0, DRIVE_LOW), MIO_CFG_OUT(GPIO18_POWEROFF, AF0, DRIVE_LOW),
MFP_CFG_OUT(GPIO3, AF0, DRIVE_HIGH), MFP_CFG_OUT(GPIO3, AF0, DRIVE_HIGH),
MFP_CFG_OUT(GPIO4, AF0, DRIVE_HIGH), MFP_CFG_OUT(GPIO4, AF0, DRIVE_HIGH),
MIO_CFG_IN(GPIO80_MAYBE_CHARGE_VDROP, AF0),
/* Backlight PWM 0 */ /* Backlight PWM 0 */
GPIO16_PWM0_OUT, GPIO16_PWM0_OUT,
...@@ -74,7 +78,7 @@ static unsigned long mioa701_pin_config[] = { ...@@ -74,7 +78,7 @@ static unsigned long mioa701_pin_config[] = {
MIO_CFG_OUT(GPIO91_SDIO_EN, AF0, DRIVE_LOW), MIO_CFG_OUT(GPIO91_SDIO_EN, AF0, DRIVE_LOW),
/* USB */ /* USB */
MIO_CFG_IN(GPIO13_USB_DETECT, AF0), MIO_CFG_IN(GPIO13_nUSB_DETECT, AF0),
MIO_CFG_OUT(GPIO22_USB_ENABLE, AF0, DRIVE_LOW), MIO_CFG_OUT(GPIO22_USB_ENABLE, AF0, DRIVE_LOW),
/* LCD */ /* LCD */
...@@ -98,12 +102,29 @@ static unsigned long mioa701_pin_config[] = { ...@@ -98,12 +102,29 @@ static unsigned long mioa701_pin_config[] = {
GPIO75_LCD_LCLK, GPIO75_LCD_LCLK,
GPIO76_LCD_PCLK, GPIO76_LCD_PCLK,
/* QCI */
GPIO12_CIF_DD_7,
GPIO17_CIF_DD_6,
GPIO50_CIF_DD_3,
GPIO51_CIF_DD_2,
GPIO52_CIF_DD_4,
GPIO53_CIF_MCLK,
GPIO54_CIF_PCLK,
GPIO55_CIF_DD_1,
GPIO81_CIF_DD_0,
GPIO82_CIF_DD_5,
GPIO84_CIF_FV,
GPIO85_CIF_LV,
/* Bluetooth */ /* Bluetooth */
MIO_CFG_IN(GPIO14_BT_nACTIVITY, AF0),
GPIO44_BTUART_CTS, GPIO44_BTUART_CTS,
GPIO42_BTUART_RXD, GPIO42_BTUART_RXD,
GPIO45_BTUART_RTS, GPIO45_BTUART_RTS,
GPIO43_BTUART_TXD, GPIO43_BTUART_TXD,
MIO_CFG_OUT(GPIO83_BT_ON, AF0, DRIVE_LOW), MIO_CFG_OUT(GPIO83_BT_ON, AF0, DRIVE_LOW),
MIO_CFG_OUT(GPIO77_BT_UNKNOWN1, AF0, DRIVE_HIGH),
MIO_CFG_OUT(GPIO86_BT_MAYBE_nRESET, AF0, DRIVE_HIGH),
/* GPS */ /* GPS */
MIO_CFG_OUT(GPIO23_GPS_UNKNOWN1, AF0, DRIVE_LOW), MIO_CFG_OUT(GPIO23_GPS_UNKNOWN1, AF0, DRIVE_LOW),
...@@ -151,16 +172,16 @@ static unsigned long mioa701_pin_config[] = { ...@@ -151,16 +172,16 @@ static unsigned long mioa701_pin_config[] = {
GPIO104_KP_MKOUT_1, GPIO104_KP_MKOUT_1,
GPIO105_KP_MKOUT_2, GPIO105_KP_MKOUT_2,
/* I2C */
GPIO117_I2C_SCL,
GPIO118_I2C_SDA,
/* Unknown */ /* Unknown */
MFP_CFG_IN(GPIO14, AF0),
MFP_CFG_IN(GPIO20, AF0), MFP_CFG_IN(GPIO20, AF0),
MFP_CFG_IN(GPIO21, AF0), MFP_CFG_IN(GPIO21, AF0),
MFP_CFG_IN(GPIO33, AF0), MFP_CFG_IN(GPIO33, AF0),
MFP_CFG_OUT(GPIO49, AF0, DRIVE_HIGH), MFP_CFG_OUT(GPIO49, AF0, DRIVE_HIGH),
MFP_CFG_OUT(GPIO57, AF0, DRIVE_HIGH), MFP_CFG_OUT(GPIO57, AF0, DRIVE_HIGH),
MFP_CFG_OUT(GPIO77, AF0, DRIVE_HIGH),
MFP_CFG_IN(GPIO80, AF0),
MFP_CFG_OUT(GPIO86, AF0, DRIVE_HIGH),
MFP_CFG_IN(GPIO96, AF0), MFP_CFG_IN(GPIO96, AF0),
MFP_CFG_OUT(GPIO116, AF0, DRIVE_HIGH), MFP_CFG_OUT(GPIO116, AF0, DRIVE_HIGH),
}; };
...@@ -407,7 +428,7 @@ static void udc_power_command(int cmd) ...@@ -407,7 +428,7 @@ static void udc_power_command(int cmd)
static int is_usb_connected(void) static int is_usb_connected(void)
{ {
return !!gpio_get_value(GPIO13_USB_DETECT); return !gpio_get_value(GPIO13_nUSB_DETECT);
} }
static struct pxa2xx_udc_mach_info mioa701_udc_info = { static struct pxa2xx_udc_mach_info mioa701_udc_info = {
...@@ -659,13 +680,19 @@ static char *supplicants[] = { ...@@ -659,13 +680,19 @@ static char *supplicants[] = {
"mioa701_battery" "mioa701_battery"
}; };
static int is_ac_connected(void)
{
return gpio_get_value(GPIO96_AC_DETECT);
}
static void mioa701_set_charge(int flags) static void mioa701_set_charge(int flags)
{ {
gpio_set_value(GPIO9_CHARGE_nEN, !flags); gpio_set_value(GPIO9_CHARGE_EN, (flags == PDA_POWER_CHARGE_USB));
} }
static struct pda_power_pdata power_pdata = { static struct pda_power_pdata power_pdata = {
.is_ac_online = is_usb_connected, .is_ac_online = is_ac_connected,
.is_usb_online = is_usb_connected,
.set_charge = mioa701_set_charge, .set_charge = mioa701_set_charge,
.supplied_to = supplicants, .supplied_to = supplicants,
.num_supplicants = ARRAY_SIZE(supplicants), .num_supplicants = ARRAY_SIZE(supplicants),
...@@ -674,8 +701,15 @@ static struct pda_power_pdata power_pdata = { ...@@ -674,8 +701,15 @@ static struct pda_power_pdata power_pdata = {
static struct resource power_resources[] = { static struct resource power_resources[] = {
[0] = { [0] = {
.name = "ac", .name = "ac",
.start = gpio_to_irq(GPIO13_USB_DETECT), .start = gpio_to_irq(GPIO96_AC_DETECT),
.end = gpio_to_irq(GPIO13_USB_DETECT), .end = gpio_to_irq(GPIO96_AC_DETECT),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
IORESOURCE_IRQ_LOWEDGE,
},
[1] = {
.name = "usb",
.start = gpio_to_irq(GPIO13_nUSB_DETECT),
.end = gpio_to_irq(GPIO13_nUSB_DETECT),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
IORESOURCE_IRQ_LOWEDGE, IORESOURCE_IRQ_LOWEDGE,
}, },
...@@ -691,120 +725,43 @@ static struct platform_device power_dev = { ...@@ -691,120 +725,43 @@ static struct platform_device power_dev = {
}, },
}; };
#if defined(CONFIG_PDA_POWER) && defined(CONFIG_TOUCHSCREEN_WM97XX) static struct wm97xx_batt_info mioa701_battery_data = {
static struct wm97xx *battery_wm; .batt_aux = WM97XX_AUX_ID1,
.temp_aux = -1,
static enum power_supply_property battery_props[] = { .charge_gpio = -1,
POWER_SUPPLY_PROP_STATUS, .min_voltage = 0xc00,
POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, .max_voltage = 0xfc0,
POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, .batt_tech = POWER_SUPPLY_TECHNOLOGY_LION,
POWER_SUPPLY_PROP_VOLTAGE_NOW, .batt_div = 1,
POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, /* Necessary for apm */ .batt_mult = 1,
.batt_name = "mioa701_battery",
}; };
static int get_battery_voltage(void) /*
{ * Camera interface
int adc = -1; */
struct pxacamera_platform_data mioa701_pxacamera_platform_data = {
if (battery_wm) .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
adc = wm97xx_read_aux_adc(battery_wm, WM97XX_AUX_ID1); PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
return adc; .mclk_10khz = 5000,
}
static int get_battery_status(struct power_supply *b)
{
int status;
if (is_usb_connected())
status = POWER_SUPPLY_STATUS_CHARGING;
else
status = POWER_SUPPLY_STATUS_DISCHARGING;
return status;
}
static int get_property(struct power_supply *b,
enum power_supply_property psp,
union power_supply_propval *val)
{
int rc = 0;
switch (psp) {
case POWER_SUPPLY_PROP_STATUS:
val->intval = get_battery_status(b);
break;
case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
val->intval = 0xfd0;
break;
case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
val->intval = 0xc00;
break;
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
val->intval = get_battery_voltage();
break;
case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
val->intval = 100;
break;
default:
val->intval = -1;
rc = -1;
}
return rc;
}; };
static struct power_supply battery_ps = { static struct soc_camera_link iclink = {
.name = "mioa701_battery", .bus_id = 0, /* Must match id in pxa27x_device_camera in device.c */
.type = POWER_SUPPLY_TYPE_BATTERY,
.get_property = get_property,
.properties = battery_props,
.num_properties = ARRAY_SIZE(battery_props),
}; };
static int battery_probe(struct platform_device *pdev) /* Board I2C devices. */
{ static struct i2c_board_info __initdata mioa701_i2c_devices[] = {
struct wm97xx *wm = platform_get_drvdata(pdev); {
int rc; /* Must initialize before the camera(s) */
I2C_BOARD_INFO("mt9m111", 0x5d),
battery_wm = wm; .platform_data = &iclink,
rc = power_supply_register(NULL, &battery_ps);
if (rc)
dev_err(&pdev->dev,
"Could not register mioa701 battery -> %d\n", rc);
return rc;
}
static int battery_remove(struct platform_device *pdev)
{
battery_wm = NULL;
return 0;
}
static struct platform_driver mioa701_battery_driver = {
.driver = {
.name = "wm97xx-battery",
}, },
.probe = battery_probe,
.remove = battery_remove
}; };
static int __init mioa701_battery_init(void) struct i2c_pxa_platform_data i2c_pdata = {
{ .fast_mode = 1,
int rc; };
rc = platform_driver_register(&mioa701_battery_driver);
if (rc)
printk(KERN_ERR "Could not register mioa701 battery driver\n");
return rc;
}
#else
static int __init mioa701_battery_init(void)
{
return 0;
}
#endif
/* /*
* Mio global * Mio global
...@@ -851,17 +808,17 @@ static void mioa701_machine_exit(void); ...@@ -851,17 +808,17 @@ static void mioa701_machine_exit(void);
static void mioa701_poweroff(void) static void mioa701_poweroff(void)
{ {
mioa701_machine_exit(); mioa701_machine_exit();
gpio_set_value(GPIO18_POWEROFF, 1); arm_machine_restart('s');
} }
static void mioa701_restart(char c) static void mioa701_restart(char c)
{ {
mioa701_machine_exit(); mioa701_machine_exit();
arm_machine_restart(c); arm_machine_restart('s');
} }
struct gpio_ress global_gpios[] = { struct gpio_ress global_gpios[] = {
MIO_GPIO_OUT(GPIO9_CHARGE_nEN, 1, "Charger enable"), MIO_GPIO_OUT(GPIO9_CHARGE_EN, 1, "Charger enable"),
MIO_GPIO_OUT(GPIO18_POWEROFF, 0, "Power Off"), MIO_GPIO_OUT(GPIO18_POWEROFF, 0, "Power Off"),
MIO_GPIO_OUT(GPIO87_LCD_POWER, 0, "LCD Power") MIO_GPIO_OUT(GPIO87_LCD_POWER, 0, "LCD Power")
}; };
...@@ -879,12 +836,16 @@ static void __init mioa701_machine_init(void) ...@@ -879,12 +836,16 @@ static void __init mioa701_machine_init(void)
set_pxa_fb_info(&mioa701_pxafb_info); set_pxa_fb_info(&mioa701_pxafb_info);
pxa_set_mci_info(&mioa701_mci_info); pxa_set_mci_info(&mioa701_mci_info);
pxa_set_keypad_info(&mioa701_keypad_info); pxa_set_keypad_info(&mioa701_keypad_info);
wm97xx_bat_set_pdata(&mioa701_battery_data);
udc_init(); udc_init();
pm_power_off = mioa701_poweroff; pm_power_off = mioa701_poweroff;
arm_pm_restart = mioa701_restart; arm_pm_restart = mioa701_restart;
platform_add_devices(devices, ARRAY_SIZE(devices)); platform_add_devices(devices, ARRAY_SIZE(devices));
gsm_init(); gsm_init();
mioa701_battery_init();
pxa_set_i2c_info(&i2c_pdata);
pxa_set_camera_info(&mioa701_pxacamera_platform_data);
i2c_register_board_info(0, ARRAY_AND_SIZE(mioa701_i2c_devices));
} }
static void mioa701_machine_exit(void) static void mioa701_machine_exit(void)
......
...@@ -55,6 +55,10 @@ static unsigned long pcm990_pin_config[] __initdata = { ...@@ -55,6 +55,10 @@ static unsigned long pcm990_pin_config[] __initdata = {
GPIO89_USBH1_PEN, GPIO89_USBH1_PEN,
/* PWM0 */ /* PWM0 */
GPIO16_PWM0_OUT, GPIO16_PWM0_OUT,
/* I2C */
GPIO117_I2C_SCL,
GPIO118_I2C_SDA,
}; };
/* /*
......
...@@ -20,6 +20,7 @@ ...@@ -20,6 +20,7 @@
#include <linux/fb.h> #include <linux/fb.h>
#include <linux/pm.h> #include <linux/pm.h>
#include <linux/delay.h> #include <linux/delay.h>
#include <linux/mtd/physmap.h>
#include <linux/gpio.h> #include <linux/gpio.h>
#include <linux/spi/spi.h> #include <linux/spi/spi.h>
#include <linux/spi/ads7846.h> #include <linux/spi/ads7846.h>
...@@ -413,9 +414,40 @@ static struct pxafb_mach_info poodle_fb_info = { ...@@ -413,9 +414,40 @@ static struct pxafb_mach_info poodle_fb_info = {
.lcd_conn = LCD_COLOR_TFT_16BPP, .lcd_conn = LCD_COLOR_TFT_16BPP,
}; };
static struct mtd_partition sharpsl_rom_parts[] = {
{
.name ="Boot PROM Filesystem",
.offset = 0x00120000,
.size = MTDPART_SIZ_FULL,
},
};
static struct physmap_flash_data sharpsl_rom_data = {
.width = 2,
.nr_parts = ARRAY_SIZE(sharpsl_rom_parts),
.parts = sharpsl_rom_parts,
};
static struct resource sharpsl_rom_resources[] = {
{
.start = 0x00000000,
.end = 0x007fffff,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device sharpsl_rom_device = {
.name = "physmap-flash",
.id = -1,
.resource = sharpsl_rom_resources,
.num_resources = ARRAY_SIZE(sharpsl_rom_resources),
.dev.platform_data = &sharpsl_rom_data,
};
static struct platform_device *devices[] __initdata = { static struct platform_device *devices[] __initdata = {
&poodle_locomo_device, &poodle_locomo_device,
&poodle_scoop_device, &poodle_scoop_device,
&sharpsl_rom_device,
}; };
static void poodle_poweroff(void) static void poodle_poweroff(void)
......
...@@ -36,12 +36,6 @@ ...@@ -36,12 +36,6 @@
#include "devices.h" #include "devices.h"
#include "clock.h" #include "clock.h"
int cpu_is_pxa26x(void)
{
return cpu_is_pxa250() && ((BOOT_DEF & 0x8) == 0);
}
EXPORT_SYMBOL_GPL(cpu_is_pxa26x);
/* /*
* Various clock factors driven by the CCCR register. * Various clock factors driven by the CCCR register.
*/ */
...@@ -319,13 +313,21 @@ void __init pxa25x_init_irq(void) ...@@ -319,13 +313,21 @@ void __init pxa25x_init_irq(void)
pxa_init_gpio(85, pxa25x_set_wake); pxa_init_gpio(85, pxa25x_set_wake);
} }
#ifdef CONFIG_CPU_PXA26x
void __init pxa26x_init_irq(void)
{
pxa_init_irq(32, pxa25x_set_wake);
pxa_init_gpio(90, pxa25x_set_wake);
}
#endif
static struct platform_device *pxa25x_devices[] __initdata = { static struct platform_device *pxa25x_devices[] __initdata = {
&pxa25x_device_udc, &pxa25x_device_udc,
&pxa_device_ffuart, &pxa_device_ffuart,
&pxa_device_btuart, &pxa_device_btuart,
&pxa_device_stuart, &pxa_device_stuart,
&pxa_device_i2s, &pxa_device_i2s,
&pxa_device_rtc, &sa1100_device_rtc,
&pxa25x_device_ssp, &pxa25x_device_ssp,
&pxa25x_device_nssp, &pxa25x_device_nssp,
&pxa25x_device_assp, &pxa25x_device_assp,
...@@ -371,7 +373,7 @@ static int __init pxa25x_init(void) ...@@ -371,7 +373,7 @@ static int __init pxa25x_init(void)
} }
/* Only add HWUART for PXA255/26x; PXA210/250 do not have it. */ /* Only add HWUART for PXA255/26x; PXA210/250 do not have it. */
if (cpu_is_pxa255() || cpu_is_pxa26x()) { if (cpu_is_pxa255()) {
clks_register(&pxa25x_hwuart_clkreg, 1); clks_register(&pxa25x_hwuart_clkreg, 1);
ret = platform_device_register(&pxa_device_hwuart); ret = platform_device_register(&pxa_device_hwuart);
} }
......
...@@ -332,38 +332,18 @@ static int pxa27x_set_wake(unsigned int irq, unsigned int on) ...@@ -332,38 +332,18 @@ static int pxa27x_set_wake(unsigned int irq, unsigned int on)
void __init pxa27x_init_irq(void) void __init pxa27x_init_irq(void)
{ {
pxa_init_irq(34, pxa27x_set_wake); pxa_init_irq(34, pxa27x_set_wake);
pxa_init_gpio(128, pxa27x_set_wake); pxa_init_gpio(121, pxa27x_set_wake);
} }
/* /*
* device registration specific to PXA27x. * device registration specific to PXA27x.
*/ */
static struct resource i2c_power_resources[] = {
{
.start = 0x40f00180,
.end = 0x40f001a3,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_PWRI2C,
.end = IRQ_PWRI2C,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device pxa27x_device_i2c_power = {
.name = "pxa2xx-i2c",
.id = 1,
.resource = i2c_power_resources,
.num_resources = ARRAY_SIZE(i2c_power_resources),
};
void __init pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info) void __init pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info)
{ {
local_irq_disable(); local_irq_disable();
PCFR |= PCFR_PI2CEN; PCFR |= PCFR_PI2CEN;
local_irq_enable(); local_irq_enable();
pxa27x_device_i2c_power.dev.platform_data = info; pxa_register_device(&pxa27x_device_i2c_power, info);
} }
static struct platform_device *devices[] __initdata = { static struct platform_device *devices[] __initdata = {
...@@ -372,8 +352,8 @@ static struct platform_device *devices[] __initdata = { ...@@ -372,8 +352,8 @@ static struct platform_device *devices[] __initdata = {
&pxa_device_btuart, &pxa_device_btuart,
&pxa_device_stuart, &pxa_device_stuart,
&pxa_device_i2s, &pxa_device_i2s,
&sa1100_device_rtc,
&pxa_device_rtc, &pxa_device_rtc,
&pxa27x_device_i2c_power,
&pxa27x_device_ssp1, &pxa27x_device_ssp1,
&pxa27x_device_ssp2, &pxa27x_device_ssp2,
&pxa27x_device_ssp3, &pxa27x_device_ssp3,
......
...@@ -29,6 +29,7 @@ ...@@ -29,6 +29,7 @@
#include <mach/pm.h> #include <mach/pm.h>
#include <mach/dma.h> #include <mach/dma.h>
#include <mach/ssp.h> #include <mach/ssp.h>
#include <mach/i2c.h>
#include "generic.h" #include "generic.h"
#include "devices.h" #include "devices.h"
...@@ -544,28 +545,9 @@ void __init pxa3xx_init_irq(void) ...@@ -544,28 +545,9 @@ void __init pxa3xx_init_irq(void)
* device registration specific to PXA3xx. * device registration specific to PXA3xx.
*/ */
static struct resource i2c_power_resources[] = {
{
.start = 0x40f500c0,
.end = 0x40f500d3,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_PWRI2C,
.end = IRQ_PWRI2C,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device pxa3xx_device_i2c_power = {
.name = "pxa2xx-i2c",
.id = 1,
.resource = i2c_power_resources,
.num_resources = ARRAY_SIZE(i2c_power_resources),
};
void __init pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info) void __init pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info)
{ {
pxa3xx_device_i2c_power.dev.platform_data = info; pxa_register_device(&pxa3xx_device_i2c_power, info);
} }
static struct platform_device *devices[] __initdata = { static struct platform_device *devices[] __initdata = {
...@@ -574,6 +556,7 @@ static struct platform_device *devices[] __initdata = { ...@@ -574,6 +556,7 @@ static struct platform_device *devices[] __initdata = {
&pxa_device_btuart, &pxa_device_btuart,
&pxa_device_stuart, &pxa_device_stuart,
&pxa_device_i2s, &pxa_device_i2s,
&sa1100_device_rtc,
&pxa_device_rtc, &pxa_device_rtc,
&pxa27x_device_ssp1, &pxa27x_device_ssp1,
&pxa27x_device_ssp2, &pxa27x_device_ssp2,
...@@ -581,7 +564,6 @@ static struct platform_device *devices[] __initdata = { ...@@ -581,7 +564,6 @@ static struct platform_device *devices[] __initdata = {
&pxa3xx_device_ssp4, &pxa3xx_device_ssp4,
&pxa27x_device_pwm0, &pxa27x_device_pwm0,
&pxa27x_device_pwm1, &pxa27x_device_pwm1,
&pxa3xx_device_i2c_power,
}; };
static struct sys_device pxa3xx_sysdev[] = { static struct sys_device pxa3xx_sysdev[] = {
......
...@@ -22,6 +22,7 @@ ...@@ -22,6 +22,7 @@
#include <linux/gpio.h> #include <linux/gpio.h>
#include <linux/leds.h> #include <linux/leds.h>
#include <linux/mmc/host.h> #include <linux/mmc/host.h>
#include <linux/mtd/physmap.h>
#include <linux/pm.h> #include <linux/pm.h>
#include <linux/backlight.h> #include <linux/backlight.h>
#include <linux/io.h> #include <linux/io.h>
...@@ -122,6 +123,10 @@ static unsigned long spitz_pin_config[] __initdata = { ...@@ -122,6 +123,10 @@ static unsigned long spitz_pin_config[] __initdata = {
GPIO105_GPIO, /* SPITZ_GPIO_CF_IRQ */ GPIO105_GPIO, /* SPITZ_GPIO_CF_IRQ */
GPIO106_GPIO, /* SPITZ_GPIO_CF2_IRQ */ GPIO106_GPIO, /* SPITZ_GPIO_CF2_IRQ */
/* I2C */
GPIO117_I2C_SCL,
GPIO118_I2C_SDA,
GPIO1_GPIO | WAKEUP_ON_EDGE_RISE, GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,
}; };
...@@ -609,10 +614,41 @@ static struct pxafb_mach_info spitz_pxafb_info = { ...@@ -609,10 +614,41 @@ static struct pxafb_mach_info spitz_pxafb_info = {
}; };
static struct mtd_partition sharpsl_rom_parts[] = {
{
.name ="Boot PROM Filesystem",
.offset = 0x00140000,
.size = MTDPART_SIZ_FULL,
},
};
static struct physmap_flash_data sharpsl_rom_data = {
.width = 2,
.nr_parts = ARRAY_SIZE(sharpsl_rom_parts),
.parts = sharpsl_rom_parts,
};
static struct resource sharpsl_rom_resources[] = {
{
.start = 0x00000000,
.end = 0x007fffff,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device sharpsl_rom_device = {
.name = "physmap-flash",
.id = -1,
.resource = sharpsl_rom_resources,
.num_resources = ARRAY_SIZE(sharpsl_rom_resources),
.dev.platform_data = &sharpsl_rom_data,
};
static struct platform_device *devices[] __initdata = { static struct platform_device *devices[] __initdata = {
&spitzscoop_device, &spitzscoop_device,
&spitzkbd_device, &spitzkbd_device,
&spitzled_device, &spitzled_device,
&sharpsl_rom_device,
}; };
static void spitz_poweroff(void) static void spitz_poweroff(void)
......
...@@ -25,6 +25,7 @@ ...@@ -25,6 +25,7 @@
#include <linux/mfd/tmio.h> #include <linux/mfd/tmio.h>
#include <linux/mtd/nand.h> #include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h> #include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/pm.h> #include <linux/pm.h>
#include <linux/gpio_keys.h> #include <linux/gpio_keys.h>
#include <linux/input.h> #include <linux/input.h>
...@@ -733,6 +734,45 @@ static void tosa_tc6393xb_teardown(struct platform_device *dev) ...@@ -733,6 +734,45 @@ static void tosa_tc6393xb_teardown(struct platform_device *dev)
gpio_free(TOSA_GPIO_CARD_VCC_ON); gpio_free(TOSA_GPIO_CARD_VCC_ON);
} }
#ifdef CONFIG_MFD_TC6393XB
static struct fb_videomode tosa_tc6393xb_lcd_mode[] = {
{
.xres = 480,
.yres = 640,
.pixclock = 0x002cdf00,/* PLL divisor */
.left_margin = 0x004c,
.right_margin = 0x005b,
.upper_margin = 0x0001,
.lower_margin = 0x000d,
.hsync_len = 0x0002,
.vsync_len = 0x0001,
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
.vmode = FB_VMODE_NONINTERLACED,
},{
.xres = 240,
.yres = 320,
.pixclock = 0x00e7f203,/* PLL divisor */
.left_margin = 0x0024,
.right_margin = 0x002f,
.upper_margin = 0x0001,
.lower_margin = 0x000d,
.hsync_len = 0x0002,
.vsync_len = 0x0001,
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
.vmode = FB_VMODE_NONINTERLACED,
}
};
static struct tmio_fb_data tosa_tc6393xb_fb_config = {
.lcd_set_power = tc6393xb_lcd_set_power,
.lcd_mode = tc6393xb_lcd_mode,
.num_modes = ARRAY_SIZE(tosa_tc6393xb_lcd_mode),
.modes = &tosa_tc6393xb_lcd_mode[0],
.height = 82,
.width = 60,
};
#endif
static struct tc6393xb_platform_data tosa_tc6393xb_data = { static struct tc6393xb_platform_data tosa_tc6393xb_data = {
.scr_pll2cr = 0x0cc1, .scr_pll2cr = 0x0cc1,
.scr_gper = 0x3300, .scr_gper = 0x3300,
...@@ -748,6 +788,9 @@ static struct tc6393xb_platform_data tosa_tc6393xb_data = { ...@@ -748,6 +788,9 @@ static struct tc6393xb_platform_data tosa_tc6393xb_data = {
.resume = tosa_tc6393xb_resume, .resume = tosa_tc6393xb_resume,
.nand_data = &tosa_tc6393xb_nand_config, .nand_data = &tosa_tc6393xb_nand_config,
#ifdef CONFIG_MFD_TC6393XB
.fb_data = &tosa_tc6393xb_fb_config,
#endif
.resume_restore = 1, .resume_restore = 1,
}; };
...@@ -789,6 +832,36 @@ static struct spi_board_info spi_board_info[] __initdata = { ...@@ -789,6 +832,36 @@ static struct spi_board_info spi_board_info[] __initdata = {
}, },
}; };
static struct mtd_partition sharpsl_rom_parts[] = {
{
.name ="Boot PROM Filesystem",
.offset = 0x00160000,
.size = MTDPART_SIZ_FULL,
},
};
static struct physmap_flash_data sharpsl_rom_data = {
.width = 2,
.nr_parts = ARRAY_SIZE(sharpsl_rom_parts),
.parts = sharpsl_rom_parts,
};
static struct resource sharpsl_rom_resources[] = {
{
.start = 0x00000000,
.end = 0x007fffff,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device sharpsl_rom_device = {
.name = "physmap-flash",
.id = -1,
.resource = sharpsl_rom_resources,
.num_resources = ARRAY_SIZE(sharpsl_rom_resources),
.dev.platform_data = &sharpsl_rom_data,
};
static struct platform_device *devices[] __initdata = { static struct platform_device *devices[] __initdata = {
&tosascoop_device, &tosascoop_device,
&tosascoop_jc_device, &tosascoop_jc_device,
...@@ -798,6 +871,7 @@ static struct platform_device *devices[] __initdata = { ...@@ -798,6 +871,7 @@ static struct platform_device *devices[] __initdata = {
&tosa_gpio_keys_device, &tosa_gpio_keys_device,
&tosaled_device, &tosaled_device,
&tosa_bt_device, &tosa_bt_device,
&sharpsl_rom_device,
}; };
static void tosa_poweroff(void) static void tosa_poweroff(void)
......
...@@ -18,6 +18,7 @@ ...@@ -18,6 +18,7 @@
#include <linux/interrupt.h> #include <linux/interrupt.h>
#include <linux/init.h> #include <linux/init.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/pwm_backlight.h> #include <linux/pwm_backlight.h>
#include <linux/smc91x.h> #include <linux/smc91x.h>
...@@ -25,7 +26,6 @@ ...@@ -25,7 +26,6 @@
#include <asm/mach/arch.h> #include <asm/mach/arch.h>
#include <mach/hardware.h> #include <mach/hardware.h>
#include <mach/audio.h> #include <mach/audio.h>
#include <mach/gpio.h>
#include <mach/pxafb.h> #include <mach/pxafb.h>
#include <mach/zylonite.h> #include <mach/zylonite.h>
#include <mach/mmc.h> #include <mach/mmc.h>
......
...@@ -16,8 +16,8 @@ ...@@ -16,8 +16,8 @@
#include <linux/module.h> #include <linux/module.h>
#include <linux/kernel.h> #include <linux/kernel.h>
#include <linux/init.h> #include <linux/init.h>
#include <linux/gpio.h>
#include <mach/gpio.h>
#include <mach/mfp-pxa320.h> #include <mach/mfp-pxa320.h>
#include <mach/zylonite.h> #include <mach/zylonite.h>
......
...@@ -481,3 +481,28 @@ __xsc3_proc_info: ...@@ -481,3 +481,28 @@ __xsc3_proc_info:
.long xsc3_mc_user_fns .long xsc3_mc_user_fns
.long xsc3_cache_fns .long xsc3_cache_fns
.size __xsc3_proc_info, . - __xsc3_proc_info .size __xsc3_proc_info, . - __xsc3_proc_info
/* Note: PXA935 changed its implementor ID from Intel to Marvell */
.type __xsc3_pxa935_proc_info,#object
__xsc3_pxa935_proc_info:
.long 0x56056000
.long 0xffffe000
.long PMD_TYPE_SECT | \
PMD_SECT_BUFFERABLE | \
PMD_SECT_CACHEABLE | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
.long PMD_TYPE_SECT | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
b __xsc3_setup
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
.long cpu_xsc3_name
.long xsc3_processor_functions
.long v4wbi_tlb_fns
.long xsc3_mc_user_fns
.long xsc3_cache_fns
.size __xsc3_pxa935_proc_info, . - __xsc3_pxa935_proc_info
...@@ -31,7 +31,7 @@ ...@@ -31,7 +31,7 @@
#include <linux/interrupt.h> #include <linux/interrupt.h>
#include <linux/wm97xx.h> #include <linux/wm97xx.h>
#include <linux/io.h> #include <linux/io.h>
#include <mach/pxa-regs.h> #include <mach/regs-ac97.h>
#define VERSION "0.13" #define VERSION "0.13"
......
...@@ -39,6 +39,8 @@ ...@@ -39,6 +39,8 @@
#include <mach/pxa-regs.h> #include <mach/pxa-regs.h>
#include <mach/camera.h> #include <mach/camera.h>
#include "pxa_camera.h"
#define PXA_CAM_VERSION_CODE KERNEL_VERSION(0, 0, 5) #define PXA_CAM_VERSION_CODE KERNEL_VERSION(0, 0, 5)
#define PXA_CAM_DRV_NAME "pxa27x-camera" #define PXA_CAM_DRV_NAME "pxa27x-camera"
......
/* Camera Interface */
#define CICR0 __REG(0x50000000)
#define CICR1 __REG(0x50000004)
#define CICR2 __REG(0x50000008)
#define CICR3 __REG(0x5000000C)
#define CICR4 __REG(0x50000010)
#define CISR __REG(0x50000014)
#define CIFR __REG(0x50000018)
#define CITOR __REG(0x5000001C)
#define CIBR0 __REG(0x50000028)
#define CIBR1 __REG(0x50000030)
#define CIBR2 __REG(0x50000038)
#define CICR0_DMAEN (1 << 31) /* DMA request enable */
#define CICR0_PAR_EN (1 << 30) /* Parity enable */
#define CICR0_SL_CAP_EN (1 << 29) /* Capture enable for slave mode */
#define CICR0_ENB (1 << 28) /* Camera interface enable */
#define CICR0_DIS (1 << 27) /* Camera interface disable */
#define CICR0_SIM (0x7 << 24) /* Sensor interface mode mask */
#define CICR0_TOM (1 << 9) /* Time-out mask */
#define CICR0_RDAVM (1 << 8) /* Receive-data-available mask */
#define CICR0_FEM (1 << 7) /* FIFO-empty mask */
#define CICR0_EOLM (1 << 6) /* End-of-line mask */
#define CICR0_PERRM (1 << 5) /* Parity-error mask */
#define CICR0_QDM (1 << 4) /* Quick-disable mask */
#define CICR0_CDM (1 << 3) /* Disable-done mask */
#define CICR0_SOFM (1 << 2) /* Start-of-frame mask */
#define CICR0_EOFM (1 << 1) /* End-of-frame mask */
#define CICR0_FOM (1 << 0) /* FIFO-overrun mask */
#define CICR1_TBIT (1 << 31) /* Transparency bit */
#define CICR1_RGBT_CONV (0x3 << 29) /* RGBT conversion mask */
#define CICR1_PPL (0x7ff << 15) /* Pixels per line mask */
#define CICR1_RGB_CONV (0x7 << 12) /* RGB conversion mask */
#define CICR1_RGB_F (1 << 11) /* RGB format */
#define CICR1_YCBCR_F (1 << 10) /* YCbCr format */
#define CICR1_RGB_BPP (0x7 << 7) /* RGB bis per pixel mask */
#define CICR1_RAW_BPP (0x3 << 5) /* Raw bis per pixel mask */
#define CICR1_COLOR_SP (0x3 << 3) /* Color space mask */
#define CICR1_DW (0x7 << 0) /* Data width mask */
#define CICR2_BLW (0xff << 24) /* Beginning-of-line pixel clock
wait count mask */
#define CICR2_ELW (0xff << 16) /* End-of-line pixel clock
wait count mask */
#define CICR2_HSW (0x3f << 10) /* Horizontal sync pulse width mask */
#define CICR2_BFPW (0x3f << 3) /* Beginning-of-frame pixel clock
wait count mask */
#define CICR2_FSW (0x7 << 0) /* Frame stabilization
wait count mask */
#define CICR3_BFW (0xff << 24) /* Beginning-of-frame line clock
wait count mask */
#define CICR3_EFW (0xff << 16) /* End-of-frame line clock
wait count mask */
#define CICR3_VSW (0x3f << 10) /* Vertical sync pulse width mask */
#define CICR3_BFPW (0x3f << 3) /* Beginning-of-frame pixel clock
wait count mask */
#define CICR3_LPF (0x7ff << 0) /* Lines per frame mask */
#define CICR4_MCLK_DLY (0x3 << 24) /* MCLK Data Capture Delay mask */
#define CICR4_PCLK_EN (1 << 23) /* Pixel clock enable */
#define CICR4_PCP (1 << 22) /* Pixel clock polarity */
#define CICR4_HSP (1 << 21) /* Horizontal sync polarity */
#define CICR4_VSP (1 << 20) /* Vertical sync polarity */
#define CICR4_MCLK_EN (1 << 19) /* MCLK enable */
#define CICR4_FR_RATE (0x7 << 8) /* Frame rate mask */
#define CICR4_DIV (0xff << 0) /* Clock divisor mask */
#define CISR_FTO (1 << 15) /* FIFO time-out */
#define CISR_RDAV_2 (1 << 14) /* Channel 2 receive data available */
#define CISR_RDAV_1 (1 << 13) /* Channel 1 receive data available */
#define CISR_RDAV_0 (1 << 12) /* Channel 0 receive data available */
#define CISR_FEMPTY_2 (1 << 11) /* Channel 2 FIFO empty */
#define CISR_FEMPTY_1 (1 << 10) /* Channel 1 FIFO empty */
#define CISR_FEMPTY_0 (1 << 9) /* Channel 0 FIFO empty */
#define CISR_EOL (1 << 8) /* End of line */
#define CISR_PAR_ERR (1 << 7) /* Parity error */
#define CISR_CQD (1 << 6) /* Camera interface quick disable */
#define CISR_CDD (1 << 5) /* Camera interface disable done */
#define CISR_SOF (1 << 4) /* Start of frame */
#define CISR_EOF (1 << 3) /* End of frame */
#define CISR_IFO_2 (1 << 2) /* FIFO overrun for Channel 2 */
#define CISR_IFO_1 (1 << 1) /* FIFO overrun for Channel 1 */
#define CISR_IFO_0 (1 << 0) /* FIFO overrun for Channel 0 */
#define CIFR_FLVL2 (0x7f << 23) /* FIFO 2 level mask */
#define CIFR_FLVL1 (0x7f << 16) /* FIFO 1 level mask */
#define CIFR_FLVL0 (0xff << 8) /* FIFO 0 level mask */
#define CIFR_THL_0 (0x3 << 4) /* Threshold Level for Channel 0 FIFO */
#define CIFR_RESET_F (1 << 3) /* Reset input FIFOs */
#define CIFR_FEN2 (1 << 2) /* FIFO enable for channel 2 */
#define CIFR_FEN1 (1 << 1) /* FIFO enable for channel 1 */
#define CIFR_FEN0 (1 << 0) /* FIFO enable for channel 0 */
...@@ -20,8 +20,8 @@ ...@@ -20,8 +20,8 @@
#include <linux/mtd/partitions.h> #include <linux/mtd/partitions.h>
#include <linux/io.h> #include <linux/io.h>
#include <linux/irq.h> #include <linux/irq.h>
#include <asm/dma.h>
#include <mach/dma.h>
#include <mach/pxa-regs.h> #include <mach/pxa-regs.h>
#include <mach/pxa3xx_nand.h> #include <mach/pxa3xx_nand.h>
......
...@@ -26,6 +26,49 @@ ...@@ -26,6 +26,49 @@
#include <mach/irda.h> #include <mach/irda.h>
#include <mach/hardware.h> #include <mach/hardware.h>
#include <mach/pxa-regs.h> #include <mach/pxa-regs.h>
#include <mach/regs-uart.h>
#define FICP __REG(0x40800000) /* Start of FICP area */
#define ICCR0 __REG(0x40800000) /* ICP Control Register 0 */
#define ICCR1 __REG(0x40800004) /* ICP Control Register 1 */
#define ICCR2 __REG(0x40800008) /* ICP Control Register 2 */
#define ICDR __REG(0x4080000c) /* ICP Data Register */
#define ICSR0 __REG(0x40800014) /* ICP Status Register 0 */
#define ICSR1 __REG(0x40800018) /* ICP Status Register 1 */
#define ICCR0_AME (1 << 7) /* Address match enable */
#define ICCR0_TIE (1 << 6) /* Transmit FIFO interrupt enable */
#define ICCR0_RIE (1 << 5) /* Recieve FIFO interrupt enable */
#define ICCR0_RXE (1 << 4) /* Receive enable */
#define ICCR0_TXE (1 << 3) /* Transmit enable */
#define ICCR0_TUS (1 << 2) /* Transmit FIFO underrun select */
#define ICCR0_LBM (1 << 1) /* Loopback mode */
#define ICCR0_ITR (1 << 0) /* IrDA transmission */
#define ICCR2_RXP (1 << 3) /* Receive Pin Polarity select */
#define ICCR2_TXP (1 << 2) /* Transmit Pin Polarity select */
#define ICCR2_TRIG (3 << 0) /* Receive FIFO Trigger threshold */
#define ICCR2_TRIG_8 (0 << 0) /* >= 8 bytes */
#define ICCR2_TRIG_16 (1 << 0) /* >= 16 bytes */
#define ICCR2_TRIG_32 (2 << 0) /* >= 32 bytes */
#ifdef CONFIG_PXA27x
#define ICSR0_EOC (1 << 6) /* DMA End of Descriptor Chain */
#endif
#define ICSR0_FRE (1 << 5) /* Framing error */
#define ICSR0_RFS (1 << 4) /* Receive FIFO service request */
#define ICSR0_TFS (1 << 3) /* Transnit FIFO service request */
#define ICSR0_RAB (1 << 2) /* Receiver abort */
#define ICSR0_TUR (1 << 1) /* Trunsmit FIFO underun */
#define ICSR0_EIF (1 << 0) /* End/Error in FIFO */
#define ICSR1_ROR (1 << 6) /* Receiver FIFO underrun */
#define ICSR1_CRE (1 << 5) /* CRC error */
#define ICSR1_EOF (1 << 4) /* End of frame */
#define ICSR1_TNF (1 << 3) /* Transmit FIFO not full */
#define ICSR1_RNE (1 << 2) /* Receive FIFO not empty */
#define ICSR1_TBY (1 << 1) /* Tramsmiter busy flag */
#define ICSR1_RSY (1 << 0) /* Recevier synchronized flag */
#define IrSR_RXPL_NEG_IS_ZERO (1<<4) #define IrSR_RXPL_NEG_IS_ZERO (1<<4)
#define IrSR_RXPL_POS_IS_ZERO 0x0 #define IrSR_RXPL_POS_IS_ZERO 0x0
......
...@@ -200,6 +200,9 @@ static inline void SMC_outsl(struct smc911x_local *lp, int reg, ...@@ -200,6 +200,9 @@ static inline void SMC_outsl(struct smc911x_local *lp, int reg,
#ifdef SMC_USE_PXA_DMA #ifdef SMC_USE_PXA_DMA
#include <mach/dma.h>
/* /*
* Define the request and free functions * Define the request and free functions
* These are unfortunately architecture specific as no generic allocation * These are unfortunately architecture specific as no generic allocation
......
...@@ -48,6 +48,7 @@ ...@@ -48,6 +48,7 @@
#include <mach/hardware.h> #include <mach/hardware.h>
#include <asm/irq.h> #include <asm/irq.h>
#include <mach/pxa-regs.h> #include <mach/pxa-regs.h>
#include <mach/regs-uart.h>
struct uart_pxa_port { struct uart_pxa_port {
......
...@@ -69,9 +69,6 @@ ...@@ -69,9 +69,6 @@
#define LCCR3_INVALID_CONFIG_MASK (LCCR3_HSP | LCCR3_VSP |\ #define LCCR3_INVALID_CONFIG_MASK (LCCR3_HSP | LCCR3_VSP |\
LCCR3_PCD | LCCR3_BPP) LCCR3_PCD | LCCR3_BPP)
static void (*pxafb_backlight_power)(int);
static void (*pxafb_lcd_power)(int, struct fb_var_screeninfo *);
static int pxafb_activate_var(struct fb_var_screeninfo *var, static int pxafb_activate_var(struct fb_var_screeninfo *var,
struct pxafb_info *); struct pxafb_info *);
static void set_ctrlr_state(struct pxafb_info *fbi, u_int state); static void set_ctrlr_state(struct pxafb_info *fbi, u_int state);
...@@ -814,6 +811,7 @@ static int pxafb_smart_init(struct pxafb_info *fbi) ...@@ -814,6 +811,7 @@ static int pxafb_smart_init(struct pxafb_info *fbi)
__func__); __func__);
return PTR_ERR(fbi->smart_thread); return PTR_ERR(fbi->smart_thread);
} }
return 0; return 0;
} }
#else #else
...@@ -976,16 +974,16 @@ static inline void __pxafb_backlight_power(struct pxafb_info *fbi, int on) ...@@ -976,16 +974,16 @@ static inline void __pxafb_backlight_power(struct pxafb_info *fbi, int on)
{ {
pr_debug("pxafb: backlight o%s\n", on ? "n" : "ff"); pr_debug("pxafb: backlight o%s\n", on ? "n" : "ff");
if (pxafb_backlight_power) if (fbi->backlight_power)
pxafb_backlight_power(on); fbi->backlight_power(on);
} }
static inline void __pxafb_lcd_power(struct pxafb_info *fbi, int on) static inline void __pxafb_lcd_power(struct pxafb_info *fbi, int on)
{ {
pr_debug("pxafb: LCD power o%s\n", on ? "n" : "ff"); pr_debug("pxafb: LCD power o%s\n", on ? "n" : "ff");
if (pxafb_lcd_power) if (fbi->lcd_power)
pxafb_lcd_power(on, &fbi->fb.var); fbi->lcd_power(on, &fbi->fb.var);
} }
static void pxafb_setup_gpio(struct pxafb_info *fbi) static void pxafb_setup_gpio(struct pxafb_info *fbi)
...@@ -1748,8 +1746,7 @@ static int __devinit pxafb_probe(struct platform_device *dev) ...@@ -1748,8 +1746,7 @@ static int __devinit pxafb_probe(struct platform_device *dev)
ret = -EINVAL; ret = -EINVAL;
goto failed; goto failed;
} }
pxafb_backlight_power = inf->pxafb_backlight_power;
pxafb_lcd_power = inf->pxafb_lcd_power;
fbi = pxafb_init_fbinfo(&dev->dev); fbi = pxafb_init_fbinfo(&dev->dev);
if (!fbi) { if (!fbi) {
/* only reason for pxafb_init_fbinfo to fail is kmalloc */ /* only reason for pxafb_init_fbinfo to fail is kmalloc */
...@@ -1758,6 +1755,9 @@ static int __devinit pxafb_probe(struct platform_device *dev) ...@@ -1758,6 +1755,9 @@ static int __devinit pxafb_probe(struct platform_device *dev)
goto failed; goto failed;
} }
fbi->backlight_power = inf->pxafb_backlight_power;
fbi->lcd_power = inf->pxafb_lcd_power;
r = platform_get_resource(dev, IORESOURCE_MEM, 0); r = platform_get_resource(dev, IORESOURCE_MEM, 0);
if (r == NULL) { if (r == NULL) {
dev_err(&dev->dev, "no I/O memory resource defined\n"); dev_err(&dev->dev, "no I/O memory resource defined\n");
......
...@@ -124,6 +124,9 @@ struct pxafb_info { ...@@ -124,6 +124,9 @@ struct pxafb_info {
struct notifier_block freq_transition; struct notifier_block freq_transition;
struct notifier_block freq_policy; struct notifier_block freq_policy;
#endif #endif
void (*lcd_power)(int, struct fb_var_screeninfo *);
void (*backlight_power)(int);
}; };
#define TO_INF(ptr,member) container_of(ptr,struct pxafb_info,member) #define TO_INF(ptr,member) container_of(ptr,struct pxafb_info,member)
......
...@@ -22,7 +22,7 @@ ...@@ -22,7 +22,7 @@
#include <asm/irq.h> #include <asm/irq.h>
#include <mach/hardware.h> #include <mach/hardware.h>
#include <mach/pxa-regs.h> #include <mach/regs-ac97.h>
#include <mach/pxa2xx-gpio.h> #include <mach/pxa2xx-gpio.h>
#include <mach/audio.h> #include <mach/audio.h>
......
...@@ -22,6 +22,7 @@ ...@@ -22,6 +22,7 @@
#include <mach/hardware.h> #include <mach/hardware.h>
#include <mach/pxa-regs.h> #include <mach/pxa-regs.h>
#include <mach/regs-ac97.h>
#include <mach/audio.h> #include <mach/audio.h>
#include "pxa2xx-pcm.h" #include "pxa2xx-pcm.h"
......
...@@ -9,7 +9,7 @@ ...@@ -9,7 +9,7 @@
* it under the terms of the GNU General Public License version 2 as * it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation. * published by the Free Software Foundation.
*/ */
#include <asm/dma.h> #include <mach/dma.h>
struct pxa2xx_runtime_data { struct pxa2xx_runtime_data {
int dma_ch; int dma_ch;
......
...@@ -21,6 +21,7 @@ ...@@ -21,6 +21,7 @@
#include <mach/hardware.h> #include <mach/hardware.h>
#include <mach/pxa-regs.h> #include <mach/pxa-regs.h>
#include <mach/regs-ac97.h>
#include "pxa2xx-pcm.h" #include "pxa2xx-pcm.h"
#include "pxa2xx-ac97.h" #include "pxa2xx-ac97.h"
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment