ASoC: Intel: Fix Kconfig with top-level selector

Follow network example suggested by Linus, move Intel definitions
in if/endif block and clarify in help text which options distro
configurations should enable - everything except legacy Baytrail stuff and
NOCODEC (test only)

To avoid user confusion, machine drivers are handled with a submenu made
dependent on this top-level selector.

There should be no functionality change - except that sound capabilities
are restored when using older configs without any user selection.

Note that the SND_SOC_ACPI_INTEL_MATCH config is currently filtered
out by the top-level selector. This will change in the near future to
allow for this option to be selected by both SST and SOF drivers

(simplification with submenu for machine drivers by Vinod Koul)

Fixes: f6a118a8 ("ASoC: Intel: clarify Kconfig dependencies")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

sound/soc/intel/Kconfig

+config SND_SOC_INTEL_SST_TOPLEVEL
+	bool "Intel ASoC SST drivers"
+	default y
+	depends on X86 || COMPILE_TEST
+	select SND_SOC_INTEL_MACH
+	help
+	  Intel ASoC SST Platform Drivers. If you have a Intel machine that
+	  has an audio controller with a DSP and I2S or DMIC port, then
+	  enable this option by saying Y
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about Intel SST drivers.
+
+if SND_SOC_INTEL_SST_TOPLEVEL
+
 config SND_SST_IPC
 	tristate
 
@@ -11,9 +27,6 @@ config SND_SST_IPC_ACPI
 	select SND_SOC_INTEL_SST
 	select IOSF_MBI
 
-config SND_SOC_INTEL_COMMON
-	tristate
-
 config SND_SOC_INTEL_SST
 	tristate
 	select SND_SOC_INTEL_SST_ACPI if ACPI
@@ -25,47 +38,56 @@ config SND_SOC_INTEL_SST_FIRMWARE
 config SND_SOC_INTEL_SST_ACPI
 	tristate
 
-config SND_SOC_ACPI_INTEL_MATCH
-	tristate
-	select SND_SOC_ACPI if ACPI
-
-config SND_SOC_INTEL_SST_TOPLEVEL
-	tristate "Intel ASoC SST drivers"
-	depends on X86 || COMPILE_TEST
-	select SND_SOC_INTEL_MACH
-	select SND_SOC_INTEL_COMMON
-	help
-          Intel ASoC Audio Drivers. If you have a Intel machine that
-          has audio controller with a DSP and I2S or DMIC port, then
-          enable this option by saying Y or M
-          If unsure select "N".
-
 config SND_SOC_INTEL_HASWELL
 	tristate "Intel ASoC SST driver for Haswell/Broadwell"
-	depends on SND_SOC_INTEL_SST_TOPLEVEL && SND_DMA_SGBUF
+	depends on SND_DMA_SGBUF
 	depends on DMADEVICES
 	select SND_SOC_INTEL_SST
 	select SND_SOC_INTEL_SST_FIRMWARE
+	select SND_SOC_ACPI_INTEL_MATCH
+	help
+	  If you have a Intel Haswell or Broadwell platform connected to
+	  an I2S codec, then enable this option by saying Y or m. This is
+	  typically used for Chromebooks. This is a recommended option.
 
 config SND_SOC_INTEL_BAYTRAIL
 	tristate "Intel ASoC SST driver for Baytrail (legacy)"
-	depends on SND_SOC_INTEL_SST_TOPLEVEL
 	depends on DMADEVICES
 	select SND_SOC_INTEL_SST
 	select SND_SOC_INTEL_SST_FIRMWARE
+	select SND_SOC_ACPI_INTEL_MATCH
+	help
+	  If you have a Intel Baytrail platform connected to an I2S codec,
+	  then enable this option by saying Y or m. This was typically used
+	  for Baytrail Chromebooks but this option is now deprecated and is
+	  not recommended, use SND_SST_ATOM_HIFI2_PLATFORM instead.
 
 config SND_SST_ATOM_HIFI2_PLATFORM
 	tristate "Intel ASoC SST driver for HiFi2 platforms (*field, *trail)"
-	depends on SND_SOC_INTEL_SST_TOPLEVEL && X86
+	depends on X86
 	select SND_SOC_COMPRESS
+	select SND_SOC_ACPI_INTEL_MATCH
 
 config SND_SOC_INTEL_SKYLAKE
 	tristate "Intel ASoC SST driver for SKL/BXT/KBL/GLK/CNL"
-	depends on SND_SOC_INTEL_SST_TOPLEVEL && PCI && ACPI
+	depends on PCI && ACPI
 	select SND_HDA_EXT_CORE
 	select SND_HDA_DSP_LOADER
 	select SND_SOC_TOPOLOGY
 	select SND_SOC_INTEL_SST
+	select SND_SOC_ACPI_INTEL_MATCH
+	help
+	  If you have a Intel Skylake/Broxton/ApolloLake/KabyLake/
+	  GeminiLake or CannonLake platform with the DSP enabled in the BIOS
+	  then enable this option by saying Y or m.
+
+config SND_SOC_ACPI_INTEL_MATCH
+	tristate
+	select SND_SOC_ACPI if ACPI
+	# this option controls the compilation of ACPI matching tables and
+	# helpers and is not meant to be selected by the user.
+
+endif ## SND_SOC_INTEL_SST_TOPLEVEL
 
 # ASoC codec drivers
 source "sound/soc/intel/boards/Kconfig"

sound/soc/intel/Makefile

 # SPDX-License-Identifier: GPL-2.0
 # Core support
-obj-$(CONFIG_SND_SOC_INTEL_COMMON) += common/
+obj-$(CONFIG_SND_SOC) += common/
 
 # Platform Support
 obj-$(CONFIG_SND_SOC_INTEL_HASWELL) += haswell/

sound/soc/intel/boards/Kconfig

-config SND_SOC_INTEL_MACH
-	tristate "Intel Audio machine drivers"
+menuconfig SND_SOC_INTEL_MACH
+	bool "Intel Machine drivers"
 	depends on SND_SOC_INTEL_SST_TOPLEVEL
-	select SND_SOC_ACPI_INTEL_MATCH if ACPI
+	help
+         Intel ASoC Machine Drivers. If you have a Intel machine that
+         has an audio controller with a DSP and I2S or DMIC port, then
+         enable this option by saying Y
+
+         Note that the answer to this question doesn't directly affect the
+         kernel: saying N will just cause the configurator to skip all
+         the questions about Intel ASoC machine drivers.
 
 if SND_SOC_INTEL_MACH
 
@@ -17,103 +24,106 @@ config SND_MFLD_MACHINE
           Say Y if you have such a device.
           If unsure select "N".
 
+if SND_SOC_INTEL_HASWELL
+
 config SND_SOC_INTEL_HASWELL_MACH
 	tristate "ASoC Audio DSP support for Intel Haswell Lynxpoint"
 	depends on X86_INTEL_LPSS && I2C && I2C_DESIGNWARE_PLATFORM
-	depends on SND_SOC_INTEL_HASWELL
 	select SND_SOC_RT5640
 	help
 	  This adds support for the Lynxpoint Audio DSP on Intel(R) Haswell
-	  Ultrabook platforms.
-	  Say Y if you have such a device.
+	  Ultrabook platforms. This is a recommended option.
+	  Say Y or m if you have such a device.
 	  If unsure select "N".
 
 config SND_SOC_INTEL_BDW_RT5677_MACH
 	tristate "ASoC Audio driver for Intel Broadwell with RT5677 codec"
 	depends on X86_INTEL_LPSS && GPIOLIB && I2C
-	depends on SND_SOC_INTEL_HASWELL
 	select SND_SOC_RT5677
 	help
 	  This adds support for Intel Broadwell platform based boards with
-	  the RT5677 audio codec.
+	  the RT5677 audio codec. This is a recommended option.
+	  Say Y or m if you have such a device.
+	  If unsure select "N".
 
 config SND_SOC_INTEL_BROADWELL_MACH
 	tristate "ASoC Audio DSP support for Intel Broadwell Wildcatpoint"
 	depends on X86_INTEL_LPSS && I2C && I2C_DESIGNWARE_PLATFORM
-	depends on SND_SOC_INTEL_HASWELL
 	select SND_SOC_RT286
 	help
 	  This adds support for the Wilcatpoint Audio DSP on Intel(R) Broadwell
 	  Ultrabook platforms.
-	  Say Y if you have such a device.
+	  Say Y or m if you have such a device. This is a recommended option.
 	  If unsure select "N".
+endif
+
+if SND_SOC_INTEL_BAYTRAIL
 
 config SND_SOC_INTEL_BYT_MAX98090_MACH
 	tristate "ASoC Audio driver for Intel Baytrail with MAX98090 codec"
 	depends on X86_INTEL_LPSS && I2C
-	depends on SND_SST_IPC_ACPI = n
-	depends on SND_SOC_INTEL_BAYTRAIL
 	select SND_SOC_MAX98090
 	help
 	  This adds audio driver for Intel Baytrail platform based boards
-	  with the MAX98090 audio codec.
+	  with the MAX98090 audio codec. This driver is deprecated, use
+	  SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH instead for better
+	  functionality.
 
 config SND_SOC_INTEL_BYT_RT5640_MACH
 	tristate "ASoC Audio driver for Intel Baytrail with RT5640 codec"
 	depends on X86_INTEL_LPSS && I2C
-	depends on SND_SST_IPC_ACPI = n
-	depends on SND_SOC_INTEL_BAYTRAIL
 	select SND_SOC_RT5640
 	help
 	  This adds audio driver for Intel Baytrail platform based boards
 	  with the RT5640 audio codec. This driver is deprecated, use
 	  SND_SOC_INTEL_BYTCR_RT5640_MACH instead for better functionality.
 
+endif
+
+if SND_SST_ATOM_HIFI2_PLATFORM
+
 config SND_SOC_INTEL_BYTCR_RT5640_MACH
         tristate "ASoC Audio driver for Intel Baytrail and Baytrail-CR with RT5640 codec"
 	depends on X86 && I2C && ACPI
 	select SND_SOC_RT5640
-	depends on SND_SST_ATOM_HIFI2_PLATFORM
 	select SND_SST_IPC_ACPI
 	help
           This adds support for ASoC machine driver for Intel(R) Baytrail and Baytrail-CR
           platforms with RT5640 audio codec.
-          Say Y if you have such a device.
+          Say Y or m if you have such a device. This is a recommended option.
           If unsure select "N".
 
 config SND_SOC_INTEL_BYTCR_RT5651_MACH
         tristate "ASoC Audio driver for Intel Baytrail and Baytrail-CR with RT5651 codec"
 	depends on X86 && I2C && ACPI
 	select SND_SOC_RT5651
-	depends on SND_SST_ATOM_HIFI2_PLATFORM
 	select SND_SST_IPC_ACPI
 	help
           This adds support for ASoC machine driver for Intel(R) Baytrail and Baytrail-CR
           platforms with RT5651 audio codec.
-          Say Y if you have such a device.
+          Say Y or m if you have such a device. This is a recommended option.
           If unsure select "N".
 
 config SND_SOC_INTEL_CHT_BSW_RT5672_MACH
         tristate "ASoC Audio driver for Intel Cherrytrail & Braswell with RT5672 codec"
 	depends on X86_INTEL_LPSS && I2C && ACPI
         select SND_SOC_RT5670
-        depends on SND_SST_ATOM_HIFI2_PLATFORM
         select SND_SST_IPC_ACPI
         help
           This adds support for ASoC machine driver for Intel(R) Cherrytrail & Braswell
           platforms with RT5672 audio codec.
-          Say Y if you have such a device.
+          Say Y or m if you have such a device. This is a recommended option.
           If unsure select "N".
 
 config SND_SOC_INTEL_CHT_BSW_RT5645_MACH
 	tristate "ASoC Audio driver for Intel Cherrytrail & Braswell with RT5645/5650 codec"
 	depends on X86_INTEL_LPSS && I2C && ACPI
 	select SND_SOC_RT5645
-	depends on SND_SST_ATOM_HIFI2_PLATFORM
 	select SND_SST_IPC_ACPI
 	help
 	  This adds support for ASoC machine driver for Intel(R) Cherrytrail & Braswell
 	  platforms with RT5645/5650 audio codec.
+	  Say Y or m if you have such a device. This is a recommended option.
 	  If unsure select "N".
 
 config SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH
@@ -121,63 +131,67 @@ config SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH
 	depends on X86_INTEL_LPSS && I2C && ACPI
 	select SND_SOC_MAX98090
 	select SND_SOC_TS3A227E
-	depends on SND_SST_ATOM_HIFI2_PLATFORM
 	select SND_SST_IPC_ACPI
 	help
 	  This adds support for ASoC machine driver for Intel(R) Cherrytrail & Braswell
 	  platforms with MAX98090 audio codec it also can support TI jack chip as aux device.
+	  Say Y or m if you have such a device. This is a recommended option.
 	  If unsure select "N".
 
 config SND_SOC_INTEL_BYT_CHT_DA7213_MACH
 	tristate "ASoC Audio driver for Intel Baytrail & Cherrytrail with DA7212/7213 codec"
 	depends on X86_INTEL_LPSS && I2C && ACPI
 	select SND_SOC_DA7213
-	depends on SND_SST_ATOM_HIFI2_PLATFORM
 	select SND_SST_IPC_ACPI
 	help
 	  This adds support for ASoC machine driver for Intel(R) Baytrail & CherryTrail
 	  platforms with DA7212/7213 audio codec.
+	  Say Y or m if you have such a device. This is a recommended option.
 	  If unsure select "N".
 
 config SND_SOC_INTEL_BYT_CHT_ES8316_MACH
 	tristate "ASoC Audio driver for Intel Baytrail & Cherrytrail with ES8316 codec"
 	depends on X86_INTEL_LPSS && I2C && ACPI
 	select SND_SOC_ES8316
-	depends on SND_SST_ATOM_HIFI2_PLATFORM
 	select SND_SST_IPC_ACPI
 	help
 	  This adds support for ASoC machine driver for Intel(R) Baytrail &
 	  Cherrytrail platforms with ES8316 audio codec.
+	  Say Y or m if you have such a device. This is a recommended option.
 	  If unsure select "N".
 
 config SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH
 	tristate "ASoC Audio driver for Intel Baytrail & Cherrytrail platform with no codec (MinnowBoard MAX, Up)"
 	depends on X86_INTEL_LPSS && I2C && ACPI
-	depends on SND_SST_ATOM_HIFI2_PLATFORM
 	select SND_SST_IPC_ACPI
 	help
 	  This adds support for ASoC machine driver for the MinnowBoard Max or
 	  Up boards and provides access to I2S signals on the Low-Speed
-	  connector
+	  connector. This is not a recommended option outside of these cases.
+	  It is not intended to be enabled by distros by default.
+	  Say Y or m if you have such a device.
+
 	  If unsure select "N".
 
+endif
+
+if SND_SOC_INTEL_SKYLAKE
+
 config SND_SOC_INTEL_SKL_RT286_MACH
 	tristate "ASoC Audio driver for SKL with RT286 I2S mode"
 	depends on X86 && ACPI && I2C
-	depends on SND_SOC_INTEL_SKYLAKE
 	select SND_SOC_RT286
 	select SND_SOC_DMIC
 	select SND_SOC_HDAC_HDMI
 	help
 	   This adds support for ASoC machine driver for Skylake platforms
 	   with RT286 I2S audio codec.
-	   Say Y if you have such a device.
+	   Say Y or m if you have such a device.
 	   If unsure select "N".
 
 config SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH
 	tristate "ASoC Audio driver for SKL with NAU88L25 and SSM4567 in I2S Mode"
 	depends on X86_INTEL_LPSS && I2C
-	depends on SND_SOC_INTEL_SKYLAKE
 	select SND_SOC_NAU8825
 	select SND_SOC_SSM4567
 	select SND_SOC_DMIC
@@ -185,13 +199,12 @@ config SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH
 	help
 	  This adds support for ASoC Onboard Codec I2S machine driver. This will
 	  create an alsa sound card for NAU88L25 + SSM4567.
-	  Say Y if you have such a device.
+	  Say Y or m if you have such a device. This is a recommended option.
 	  If unsure select "N".
 
 config SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH
 	tristate "ASoC Audio driver for SKL with NAU88L25 and MAX98357A in I2S Mode"
 	depends on X86_INTEL_LPSS && I2C
-	depends on SND_SOC_INTEL_SKYLAKE
 	select SND_SOC_NAU8825
 	select SND_SOC_MAX98357A
 	select SND_SOC_DMIC
@@ -199,13 +212,12 @@ config SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH
 	help
 	  This adds support for ASoC Onboard Codec I2S machine driver. This will
 	  create an alsa sound card for NAU88L25 + MAX98357A.
-	  Say Y if you have such a device.
+	  Say Y or m if you have such a device. This is a recommended option.
 	  If unsure select "N".
 
 config SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH
 	tristate "ASoC Audio driver for Broxton with DA7219 and MAX98357A in I2S Mode"
 	depends on X86 && ACPI && I2C
-	depends on SND_SOC_INTEL_SKYLAKE
 	select SND_SOC_DA7219
 	select SND_SOC_MAX98357A
 	select SND_SOC_DMIC
@@ -214,13 +226,12 @@ config SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH
 	help
 	   This adds support for ASoC machine driver for Broxton-P platforms
 	   with DA7219 + MAX98357A I2S audio codec.
-	   Say Y if you have such a device.
+	   Say Y or m if you have such a device. This is a recommended option.
 	   If unsure select "N".
 
 config SND_SOC_INTEL_BXT_RT298_MACH
 	tristate "ASoC Audio driver for Broxton with RT298 I2S mode"
 	depends on X86 && ACPI && I2C
-	depends on SND_SOC_INTEL_SKYLAKE
 	select SND_SOC_RT298
 	select SND_SOC_DMIC
 	select SND_SOC_HDAC_HDMI
@@ -228,14 +239,13 @@ config SND_SOC_INTEL_BXT_RT298_MACH
 	help
 	   This adds support for ASoC machine driver for Broxton platforms
 	   with RT286 I2S audio codec.
-	   Say Y if you have such a device.
+	   Say Y or m if you have such a device. This is a recommended option.
 	   If unsure select "N".
 
 config SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH
 	tristate "ASoC Audio driver for KBL with RT5663 and MAX98927 in I2S Mode"
 	depends on X86_INTEL_LPSS && I2C
 	select SND_SOC_INTEL_SST
-	depends on SND_SOC_INTEL_SKYLAKE
 	select SND_SOC_RT5663
 	select SND_SOC_MAX98927
 	select SND_SOC_DMIC
@@ -243,14 +253,13 @@ config SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH
 	help
 	  This adds support for ASoC Onboard Codec I2S machine driver. This will
 	  create an alsa sound card for RT5663 + MAX98927.
-	  Say Y if you have such a device.
+	  Say Y or m if you have such a device. This is a recommended option.
 	  If unsure select "N".
 
 config SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH
         tristate "ASoC Audio driver for KBL with RT5663, RT5514 and MAX98927 in I2S Mode"
         depends on X86_INTEL_LPSS && I2C && SPI
         select SND_SOC_INTEL_SST
-        depends on SND_SOC_INTEL_SKYLAKE
         select SND_SOC_RT5663
         select SND_SOC_RT5514
         select SND_SOC_RT5514_SPI
@@ -259,7 +268,8 @@ config SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH
         help
           This adds support for ASoC Onboard Codec I2S machine driver. This will
           create an alsa sound card for RT5663 + RT5514 + MAX98927.
-          Say Y if you have such a device.
+          Say Y or m if you have such a device. This is a recommended option.
           If unsure select "N".
-
 endif
+
+endif ## SND_SOC_INTEL_MACH