Commit c61c15e0 authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM 64-bit DT updates from Arnd Bergmann:
 "ARM64 DT updates are fairly small this time, only two new SoCs and a
  handful of new machines get added, all of them similar to other
  hardware we already support.

  New SoC:

   - HiSilicon Kirin960/Hi3660 and HiKey960 development board

   - NXP LS1012a with three reference boards:
        http://www.nxp.com/products/microcontrollers-and-processors/arm-processors/qoriq-layerscape-arm-processors/qoriq-layerscape-1012a-low-power-communication-processor:LS1012A

  New development board:

   - Banana Pi M64, based on Allwinner A64:
        http://www.banana-pi.org/m64.html

   - SolidRun MACCHIATOBin based on Marvell Armada 8K:
        https://www.solid-run.com/marvell-armada-family/armada-8040-community-board/

   - Broadcom BCM958712DxXMC NorthStar2 reference board (another one)

  A lot of platforms improve support for existing machines by adding
  extra devices for which a binding and driver is availabe:

  Allwinner:
   - MMC, USB

  ARM Juno:
   - Coresight, STM

  Broadcom:
   - NS2 GICv2m irqchip and PCIe

  Marvell:
   - Armada 3700 SPI, I2C, ethernet switch

  Mediatek:
   - MT8173 thermal

  NXP i.MX:
   - LS1046A thermal

  Qualcomm:
   - coresight on MSM8916, HDMI, WCNSS, SCM

  Renesas:
   - r8a779[56] thermal, powerdomain, ethernet, sound, pwm, can, can fd

  Rockchip:
   - thermal, eDP, pinctrl enhancements

  Samsung:
   - TM2 touchkey, Exynos5433 HDMI and power management improvements

  UniPhier:
   - SD reset, eMMC controller

  ZTE:
   - oppv2 cpufreq"

* tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (110 commits)
  arm64: dts: qcom: Add msm8916 CoreSight components
  arm64: dts: marvell: adjust name of sd-mmc-gop clock in syscon
  arm64: allwinner: add BananaPi-M64 support
  arm64: allwinner: a64: add UART1 pin nodes
  arm64: allwinner: pine64: add MMC support
  arm64: allwinner: a64: Increase the MMC max frequency
  arm64: allwinner: a64: Add MMC pinctrl nodes
  arm64: allwinner: a64: Add MMC nodes
  dt-bindings: clockgen: Add compatible string for LS1012A
  Documentation: DT: add LS1012A compatible for SCFG and DCFG
  Documentation: DT: Add entry for FSL LS1012A RDB, FRDM, QDS boards
  arm64: dts: marvell: add generic-ahci compatibles for CP110 ahci
  arm64: tegra: Use symbolic reset identifiers
  arm64: dts: r8a7796: Mark EthernetAVB device node disabled
  arm64: dts: r8a7795: Mark EthernetAVB device node disabled
  arm64: dts: r8a7795: tidyup audma definition order
  arm64: dts: r8a7796: Link ARM GIC to clock and clock domain
  arm64: dts: r8a7795: Link ARM GIC to clock and clock domain
  arm64: dts: r8a7796: Add R-Car Gen3 thermal support
  arm64: dts: r8a7795: Add R-Car Gen3 thermal support
  ...
parents 195849ea cbab3197
...@@ -158,6 +158,7 @@ nodes to be present and contain the properties described below. ...@@ -158,6 +158,7 @@ nodes to be present and contain the properties described below.
"arm,cortex-a53" "arm,cortex-a53"
"arm,cortex-a57" "arm,cortex-a57"
"arm,cortex-a72" "arm,cortex-a72"
"arm,cortex-a73"
"arm,cortex-m0" "arm,cortex-m0"
"arm,cortex-m0+" "arm,cortex-m0+"
"arm,cortex-m1" "arm,cortex-m1"
......
...@@ -108,7 +108,7 @@ status. ...@@ -108,7 +108,7 @@ status.
- compatible: Should contain a chip-specific compatible string, - compatible: Should contain a chip-specific compatible string,
Chip-specific strings are of the form "fsl,<chip>-scfg", Chip-specific strings are of the form "fsl,<chip>-scfg",
The following <chip>s are known to be supported: The following <chip>s are known to be supported:
ls1021a, ls1043a, ls1046a, ls2080a. ls1012a, ls1021a, ls1043a, ls1046a, ls2080a.
- reg: should contain base address and length of SCFG memory-mapped registers - reg: should contain base address and length of SCFG memory-mapped registers
...@@ -126,7 +126,7 @@ core start address and release the secondary core from holdoff and startup. ...@@ -126,7 +126,7 @@ core start address and release the secondary core from holdoff and startup.
- compatible: Should contain a chip-specific compatible string, - compatible: Should contain a chip-specific compatible string,
Chip-specific strings are of the form "fsl,<chip>-dcfg", Chip-specific strings are of the form "fsl,<chip>-dcfg",
The following <chip>s are known to be supported: The following <chip>s are known to be supported:
ls1021a, ls1043a, ls1046a, ls2080a. ls1012a, ls1021a, ls1043a, ls1046a, ls2080a.
- reg : should contain base address and length of DCFG memory-mapped registers - reg : should contain base address and length of DCFG memory-mapped registers
...@@ -139,6 +139,22 @@ Example: ...@@ -139,6 +139,22 @@ Example:
Freescale ARMv8 based Layerscape SoC family Device Tree Bindings Freescale ARMv8 based Layerscape SoC family Device Tree Bindings
---------------------------------------------------------------- ----------------------------------------------------------------
LS1012A SoC
Required root node properties:
- compatible = "fsl,ls1012a";
LS1012A ARMv8 based RDB Board
Required root node properties:
- compatible = "fsl,ls1012a-rdb", "fsl,ls1012a";
LS1012A ARMv8 based FRDM Board
Required root node properties:
- compatible = "fsl,ls1012a-frdm", "fsl,ls1012a";
LS1012A ARMv8 based QDS Board
Required root node properties:
- compatible = "fsl,ls1012a-qds", "fsl,ls1012a";
LS1043A SoC LS1043A SoC
Required root node properties: Required root node properties:
- compatible = "fsl,ls1043a"; - compatible = "fsl,ls1043a";
......
Hisilicon Platforms Device Tree Bindings Hisilicon Platforms Device Tree Bindings
---------------------------------------------------- ----------------------------------------------------
Hi3660 SoC
Required root node properties:
- compatible = "hisilicon,hi3660";
Hi4511 Board Hi4511 Board
Required root node properties: Required root node properties:
- compatible = "hisilicon,hi3620-hi4511"; - compatible = "hisilicon,hi3620-hi4511";
......
...@@ -75,7 +75,7 @@ Boards: ...@@ -75,7 +75,7 @@ Boards:
compatible = "renesas,rskrza1", "renesas,r7s72100" compatible = "renesas,rskrza1", "renesas,r7s72100"
- Salvator-X (RTP0RC7795SIPB0010S) - Salvator-X (RTP0RC7795SIPB0010S)
compatible = "renesas,salvator-x", "renesas,r8a7795"; compatible = "renesas,salvator-x", "renesas,r8a7795";
- Salvator-X - Salvator-X (RTP0RC7796SIPB0011S)
compatible = "renesas,salvator-x", "renesas,r8a7796"; compatible = "renesas,salvator-x", "renesas,r8a7796";
- SILK (RTP0RC7794LCB00011S) - SILK (RTP0RC7794LCB00011S)
compatible = "renesas,silk", "renesas,r8a7794" compatible = "renesas,silk", "renesas,r8a7794"
......
...@@ -31,6 +31,7 @@ Required properties: ...@@ -31,6 +31,7 @@ Required properties:
* "fsl,t4240-clockgen" * "fsl,t4240-clockgen"
* "fsl,b4420-clockgen" * "fsl,b4420-clockgen"
* "fsl,b4860-clockgen" * "fsl,b4860-clockgen"
* "fsl,ls1012a-clockgen"
* "fsl,ls1021a-clockgen" * "fsl,ls1021a-clockgen"
* "fsl,ls1043a-clockgen" * "fsl,ls1043a-clockgen"
* "fsl,ls1046a-clockgen" * "fsl,ls1046a-clockgen"
......
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-bananapi-m64.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb
always := $(dtb-y) always := $(dtb-y)
......
/*
* Copyright (c) 2016 ARM Ltd.
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "sun50i-a64.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "BananaPi-M64";
compatible = "sinovoip,bananapi-m64", "allwinner,sun50i-a64";
aliases {
serial0 = &uart0;
serial1 = &uart1;
};
chosen {
stdout-path = "serial0:115200n8";
};
reg_vcc3v3: vcc3v3 {
compatible = "regulator-fixed";
regulator-name = "vcc3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
status = "okay";
};
&i2c1_pins {
bias-pull-up;
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v3>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
cd-inverted;
disable-wp;
bus-width = <4>;
status = "okay";
};
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
non-removable;
status = "okay";
};
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <8>;
non-removable;
cap-mmc-hw-reset;
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
status = "okay";
};
...@@ -44,6 +44,8 @@ ...@@ -44,6 +44,8 @@
#include "sun50i-a64.dtsi" #include "sun50i-a64.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ { / {
model = "Pine64"; model = "Pine64";
compatible = "pine64,pine64", "allwinner,sun50i-a64"; compatible = "pine64,pine64", "allwinner,sun50i-a64";
...@@ -55,11 +57,16 @@ aliases { ...@@ -55,11 +57,16 @@ aliases {
chosen { chosen {
stdout-path = "serial0:115200n8"; stdout-path = "serial0:115200n8";
}; };
reg_vcc3v3: vcc3v3 {
compatible = "regulator-fixed";
regulator-name = "vcc3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
}; };
&uart0 { &ehci1 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
status = "okay"; status = "okay";
}; };
...@@ -72,3 +79,33 @@ &i2c1 { ...@@ -72,3 +79,33 @@ &i2c1 {
&i2c1_pins { &i2c1_pins {
bias-pull-up; bias-pull-up;
}; };
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v3>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
cd-inverted;
disable-wp;
bus-width = <4>;
status = "okay";
};
&ohci1 {
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
status = "okay";
};
&usb_otg {
dr_mode = "host";
status = "okay";
};
&usbphy {
status = "okay";
};
...@@ -42,8 +42,9 @@ ...@@ -42,8 +42,9 @@
* OTHER DEALINGS IN THE SOFTWARE. * OTHER DEALINGS IN THE SOFTWARE.
*/ */
#include <dt-bindings/clock/sun50i-a64-ccu.h>
#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/pinctrl/sun4i-a10.h> #include <dt-bindings/reset/sun50i-a64-ccu.h>
/ { / {
interrupt-parent = <&gic>; interrupt-parent = <&gic>;
...@@ -120,6 +121,105 @@ soc { ...@@ -120,6 +121,105 @@ soc {
#size-cells = <1>; #size-cells = <1>;
ranges; ranges;
mmc0: mmc@1c0f000 {
compatible = "allwinner,sun50i-a64-mmc";
reg = <0x01c0f000 0x1000>;
clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
clock-names = "ahb", "mmc";
resets = <&ccu RST_BUS_MMC0>;
reset-names = "ahb";
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
max-frequency = <150000000>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
mmc1: mmc@1c10000 {
compatible = "allwinner,sun50i-a64-mmc";
reg = <0x01c10000 0x1000>;
clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
clock-names = "ahb", "mmc";
resets = <&ccu RST_BUS_MMC1>;
reset-names = "ahb";
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
max-frequency = <150000000>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
mmc2: mmc@1c11000 {
compatible = "allwinner,sun50i-a64-emmc";
reg = <0x01c11000 0x1000>;
clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
clock-names = "ahb", "mmc";
resets = <&ccu RST_BUS_MMC2>;
reset-names = "ahb";
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
max-frequency = <200000000>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
usb_otg: usb@01c19000 {
compatible = "allwinner,sun8i-a33-musb";
reg = <0x01c19000 0x0400>;
clocks = <&ccu CLK_BUS_OTG>;
resets = <&ccu RST_BUS_OTG>;
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "mc";
phys = <&usbphy 0>;
phy-names = "usb";
extcon = <&usbphy 0>;
status = "disabled";
};
usbphy: phy@01c19400 {
compatible = "allwinner,sun50i-a64-usb-phy";
reg = <0x01c19400 0x14>,
<0x01c1b800 0x4>;
reg-names = "phy_ctrl",
"pmu1";
clocks = <&ccu CLK_USB_PHY0>,
<&ccu CLK_USB_PHY1>;
clock-names = "usb0_phy",
"usb1_phy";
resets = <&ccu RST_USB_PHY0>,
<&ccu RST_USB_PHY1>;
reset-names = "usb0_reset",
"usb1_reset";
status = "disabled";
#phy-cells = <1>;
};
ehci1: usb@01c1b000 {
compatible = "allwinner,sun50i-a64-ehci", "generic-ehci";
reg = <0x01c1b000 0x100>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_OHCI1>,
<&ccu CLK_BUS_EHCI1>,
<&ccu CLK_USB_OHCI1>;
resets = <&ccu RST_BUS_OHCI1>,
<&ccu RST_BUS_EHCI1>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
};
ohci1: usb@01c1b400 {
compatible = "allwinner,sun50i-a64-ohci", "generic-ohci";
reg = <0x01c1b400 0x100>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_OHCI1>,
<&ccu CLK_USB_OHCI1>;
resets = <&ccu RST_BUS_OHCI1>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
};
ccu: clock@01c20000 { ccu: clock@01c20000 {
compatible = "allwinner,sun50i-a64-ccu"; compatible = "allwinner,sun50i-a64-ccu";
reg = <0x01c20000 0x400>; reg = <0x01c20000 0x400>;
...@@ -146,10 +246,45 @@ i2c1_pins: i2c1_pins { ...@@ -146,10 +246,45 @@ i2c1_pins: i2c1_pins {
function = "i2c1"; function = "i2c1";
}; };
mmc0_pins: mmc0-pins {
pins = "PF0", "PF1", "PF2", "PF3",
"PF4", "PF5";
function = "mmc0";
drive-strength = <30>;
bias-pull-up;
};
mmc1_pins: mmc1-pins {
pins = "PG0", "PG1", "PG2", "PG3",
"PG4", "PG5";
function = "mmc1";
drive-strength = <30>;
bias-pull-up;
};
mmc2_pins: mmc2-pins {
pins = "PC1", "PC5", "PC6", "PC8", "PC9",
"PC10","PC11", "PC12", "PC13",
"PC14", "PC15", "PC16";
function = "mmc2";
drive-strength = <30>;
bias-pull-up;
};
uart0_pins_a: uart0@0 { uart0_pins_a: uart0@0 {
pins = "PB8", "PB9"; pins = "PB8", "PB9";
function = "uart0"; function = "uart0";
}; };
uart1_pins: uart1_pins {
pins = "PG6", "PG7";
function = "uart1";
};
uart1_rts_cts_pins: uart1_rts_cts_pins {
pins = "PG8", "PG9";
function = "uart1";
};
}; };
uart0: serial@1c28000 { uart0: serial@1c28000 {
......
#include "juno-clocks.dtsi"
/ {
/* /*
* Devices shared by all Juno boards * Devices shared by all Juno boards
*/ */
dma-ranges = <0 0 0 0 0x100 0>;
memtimer: timer@2a810000 { memtimer: timer@2a810000 {
compatible = "arm,armv7-timer-mem"; compatible = "arm,armv7-timer-mem";
...@@ -48,6 +52,7 @@ smmu_etr: iommu@2b600000 { ...@@ -48,6 +52,7 @@ smmu_etr: iommu@2b600000 {
#iommu-cells = <1>; #iommu-cells = <1>;
#global-interrupts = <1>; #global-interrupts = <1>;
dma-coherent; dma-coherent;
power-domains = <&scpi_devpd 0>;
status = "disabled"; status = "disabled";
}; };
...@@ -83,7 +88,7 @@ timer { ...@@ -83,7 +88,7 @@ timer {
* The actual size is just 4K though 64K is reserved. Access to the * The actual size is just 4K though 64K is reserved. Access to the
* unmapped reserved region results in a DECERR response. * unmapped reserved region results in a DECERR response.
*/ */
etf@20010000 { etf@20010000 { /* etf0 */
compatible = "arm,coresight-tmc", "arm,primecell"; compatible = "arm,coresight-tmc", "arm,primecell";
reg = <0 0x20010000 0 0x1000>; reg = <0 0x20010000 0 0x1000>;
...@@ -97,7 +102,7 @@ ports { ...@@ -97,7 +102,7 @@ ports {
/* input port */ /* input port */
port@0 { port@0 {
reg = <0>; reg = <0>;
etf_in_port: endpoint { etf0_in_port: endpoint {
slave-mode; slave-mode;
remote-endpoint = <&main_funnel_out_port>; remote-endpoint = <&main_funnel_out_port>;
}; };
...@@ -106,8 +111,7 @@ etf_in_port: endpoint { ...@@ -106,8 +111,7 @@ etf_in_port: endpoint {
/* output port */ /* output port */
port@1 { port@1 {
reg = <0>; reg = <0>;
etf_out_port: endpoint { etf0_out_port: endpoint {
remote-endpoint = <&replicator_in_port0>;
}; };
}; };
}; };
...@@ -128,7 +132,8 @@ tpiu_in_port: endpoint { ...@@ -128,7 +132,8 @@ tpiu_in_port: endpoint {
}; };
}; };
main-funnel@20040000 { /* main funnel on Juno r0, cssys0 funnel on Juno r1/r2 as per TRM*/
main_funnel: funnel@20040000 {
compatible = "arm,coresight-funnel", "arm,primecell"; compatible = "arm,coresight-funnel", "arm,primecell";
reg = <0 0x20040000 0 0x1000>; reg = <0 0x20040000 0 0x1000>;
...@@ -139,13 +144,15 @@ ports { ...@@ -139,13 +144,15 @@ ports {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
/* output port */
port@0 { port@0 {
reg = <0>; reg = <0>;
main_funnel_out_port: endpoint { main_funnel_out_port: endpoint {
remote-endpoint = <&etf_in_port>; remote-endpoint = <&etf0_in_port>;
}; };
}; };
/* input ports */
port@1 { port@1 {
reg = <0>; reg = <0>;
main_funnel_in_port0: endpoint { main_funnel_in_port0: endpoint {
...@@ -161,7 +168,6 @@ main_funnel_in_port1: endpoint { ...@@ -161,7 +168,6 @@ main_funnel_in_port1: endpoint {
remote-endpoint = <&cluster1_funnel_out_port>; remote-endpoint = <&cluster1_funnel_out_port>;
}; };
}; };
}; };
}; };
...@@ -181,6 +187,21 @@ etr_in_port: endpoint { ...@@ -181,6 +187,21 @@ etr_in_port: endpoint {
}; };
}; };
stm@20100000 {
compatible = "arm,coresight-stm", "arm,primecell";
reg = <0 0x20100000 0 0x1000>,
<0 0x28000000 0 0x1000000>;
reg-names = "stm-base", "stm-stimulus-base";
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
port {
stm_out_port: endpoint {
};
};
};
etm0: etm@22040000 { etm0: etm@22040000 {
compatible = "arm,coresight-etm4x", "arm,primecell"; compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x22040000 0 0x1000>; reg = <0 0x22040000 0 0x1000>;
...@@ -195,7 +216,7 @@ cluster0_etm0_out_port: endpoint { ...@@ -195,7 +216,7 @@ cluster0_etm0_out_port: endpoint {
}; };
}; };
cluster0-funnel@220c0000 { funnel@220c0000 { /* cluster0 funnel */
compatible = "arm,coresight-funnel", "arm,primecell"; compatible = "arm,coresight-funnel", "arm,primecell";
reg = <0 0x220c0000 0 0x1000>; reg = <0 0x220c0000 0 0x1000>;
...@@ -259,7 +280,7 @@ cluster1_etm0_out_port: endpoint { ...@@ -259,7 +280,7 @@ cluster1_etm0_out_port: endpoint {
}; };
}; };
cluster1-funnel@230c0000 { funnel@230c0000 { /* cluster1 funnel */
compatible = "arm,coresight-funnel", "arm,primecell"; compatible = "arm,coresight-funnel", "arm,primecell";
reg = <0 0x230c0000 0 0x1000>; reg = <0 0x230c0000 0 0x1000>;
...@@ -382,7 +403,6 @@ port@2 { ...@@ -382,7 +403,6 @@ port@2 {
reg = <0>; reg = <0>;
replicator_in_port0: endpoint { replicator_in_port0: endpoint {
slave-mode; slave-mode;
remote-endpoint = <&etf_out_port>;
}; };
}; };
}; };
...@@ -507,8 +527,6 @@ gpu1_thermal_zone: gpu1 { ...@@ -507,8 +527,6 @@ gpu1_thermal_zone: gpu1 {
}; };
}; };
/include/ "juno-clocks.dtsi"
smmu_dma: iommu@7fb00000 { smmu_dma: iommu@7fb00000 {
compatible = "arm,mmu-401", "arm,smmu-v1"; compatible = "arm,mmu-401", "arm,smmu-v1";
reg = <0x0 0x7fb00000 0x0 0x10000>; reg = <0x0 0x7fb00000 0x0 0x10000>;
...@@ -719,3 +737,4 @@ site2: tlx@60000000 { ...@@ -719,3 +737,4 @@ site2: tlx@60000000 {
interrupt-map-mask = <0 0>; interrupt-map-mask = <0 0>;
interrupt-map = <0 0 &gic 0 0 0 168 IRQ_TYPE_LEVEL_HIGH>; interrupt-map = <0 0 &gic 0 0 0 168 IRQ_TYPE_LEVEL_HIGH>;
}; };
};
...@@ -6,7 +6,7 @@ ...@@ -6,7 +6,7 @@
* This file is licensed under a dual GPLv2 or BSD license. * This file is licensed under a dual GPLv2 or BSD license.
* *
*/ */
/ {
/* SoC fixed clocks */ /* SoC fixed clocks */
soc_uartclk: refclk7273800hz { soc_uartclk: refclk7273800hz {
compatible = "fixed-clock"; compatible = "fixed-clock";
...@@ -42,3 +42,4 @@ soc_faxiclk: refclk400mhz { ...@@ -42,3 +42,4 @@ soc_faxiclk: refclk400mhz {
clock-frequency = <400000000>; clock-frequency = <400000000>;
clock-output-names = "faxi_clk"; clock-output-names = "faxi_clk";
}; };
};
/ {
funnel@20130000 { /* cssys1 */
compatible = "arm,coresight-funnel", "arm,primecell";
reg = <0 0x20130000 0 0x1000>;
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
/* output port */
port@0 {
reg = <0>;
csys1_funnel_out_port: endpoint {
remote-endpoint = <&etf1_in_port>;
};
};
/* input port */
port@1 {
reg = <0>;
csys1_funnel_in_port0: endpoint {
slave-mode;
};
};
};
};
etf@20140000 { /* etf1 */
compatible = "arm,coresight-tmc", "arm,primecell";
reg = <0 0x20140000 0 0x1000>;
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
/* input port */
port@0 {
reg = <0>;
etf1_in_port: endpoint {
slave-mode;
remote-endpoint = <&csys1_funnel_out_port>;
};
};
/* output port */
port@1 {
reg = <0>;
etf1_out_port: endpoint {
remote-endpoint = <&csys2_funnel_in_port1>;
};
};
};
};
funnel@20150000 { /* cssys2 */
compatible = "arm,coresight-funnel", "arm,primecell";
reg = <0 0x20150000 0 0x1000>;
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
/* output port */
port@0 {
reg = <0>;
csys2_funnel_out_port: endpoint {
remote-endpoint = <&replicator_in_port0>;
};
};
/* input ports */
port@1 {
reg = <0>;
csys2_funnel_in_port0: endpoint {
slave-mode;
remote-endpoint = <&etf0_out_port>;
};
};
port@2 {
reg = <1>;
csys2_funnel_in_port1: endpoint {
slave-mode;
remote-endpoint = <&etf1_out_port>;
};
};
};
};
};
...@@ -131,13 +131,6 @@ ethernet@2,00000000 { ...@@ -131,13 +131,6 @@ ethernet@2,00000000 {
vddvario-supply = <&mb_fixed_3v3>; vddvario-supply = <&mb_fixed_3v3>;
}; };
usb@5,00000000 {
compatible = "nxp,usb-isp1763";
reg = <5 0x00000000 0x20000>;
bus-width = <16>;
interrupts = <4>;
};
iofpga@3,00000000 { iofpga@3,00000000 {
compatible = "simple-bus"; compatible = "simple-bus";
#address-cells = <1>; #address-cells = <1>;
......
...@@ -9,6 +9,8 @@ ...@@ -9,6 +9,8 @@
/dts-v1/; /dts-v1/;
#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/arm-gic.h>
#include "juno-base.dtsi"
#include "juno-cs-r1r2.dtsi"
/ { / {
model = "ARM Juno development board (r1)"; model = "ARM Juno development board (r1)";
...@@ -176,8 +178,6 @@ pmu_a53 { ...@@ -176,8 +178,6 @@ pmu_a53 {
<&A53_2>, <&A53_2>,
<&A53_3>; <&A53_3>;
}; };
#include "juno-base.dtsi"
}; };
&memtimer { &memtimer {
...@@ -227,3 +227,15 @@ &gpu0_thermal_zone { ...@@ -227,3 +227,15 @@ &gpu0_thermal_zone {
&gpu1_thermal_zone { &gpu1_thermal_zone {
status = "okay"; status = "okay";
}; };
&etf0_out_port {
remote-endpoint = <&csys2_funnel_in_port0>;
};
&replicator_in_port0 {
remote-endpoint = <&csys2_funnel_out_port>;
};
&stm_out_port {
remote-endpoint = <&csys1_funnel_in_port0>;
};
...@@ -9,6 +9,8 @@ ...@@ -9,6 +9,8 @@
/dts-v1/; /dts-v1/;
#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/arm-gic.h>
#include "juno-base.dtsi"
#include "juno-cs-r1r2.dtsi"
/ { / {
model = "ARM Juno development board (r2)"; model = "ARM Juno development board (r2)";
...@@ -176,8 +178,6 @@ pmu_a53 { ...@@ -176,8 +178,6 @@ pmu_a53 {
<&A53_2>, <&A53_2>,
<&A53_3>; <&A53_3>;
}; };
#include "juno-base.dtsi"
}; };
&memtimer { &memtimer {
...@@ -227,3 +227,15 @@ &gpu0_thermal_zone { ...@@ -227,3 +227,15 @@ &gpu0_thermal_zone {
&gpu1_thermal_zone { &gpu1_thermal_zone {
status = "okay"; status = "okay";
}; };
&etf0_out_port {
remote-endpoint = <&csys2_funnel_in_port0>;
};
&replicator_in_port0 {
remote-endpoint = <&csys2_funnel_out_port>;
};
&stm_out_port {
remote-endpoint = <&csys1_funnel_in_port0>;
};
...@@ -9,6 +9,7 @@ ...@@ -9,6 +9,7 @@
/dts-v1/; /dts-v1/;
#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/arm-gic.h>
#include "juno-base.dtsi"
/ { / {
model = "ARM Juno development board (r0)"; model = "ARM Juno development board (r0)";
...@@ -176,8 +177,6 @@ pmu_a53 { ...@@ -176,8 +177,6 @@ pmu_a53 {
<&A53_2>, <&A53_2>,
<&A53_3>; <&A53_3>;
}; };
#include "juno-base.dtsi"
}; };
&etm0 { &etm0 {
...@@ -203,3 +202,27 @@ &etm4 { ...@@ -203,3 +202,27 @@ &etm4 {
&etm5 { &etm5 {
cpu = <&A53_3>; cpu = <&A53_3>;
}; };
&etf0_out_port {
remote-endpoint = <&replicator_in_port0>;
};
&replicator_in_port0 {
remote-endpoint = <&etf0_out_port>;
};
&stm_out_port {
remote-endpoint = <&main_funnel_in_port2>;
};
&main_funnel {
ports {
port@3 {
reg = <2>;
main_funnel_in_port2: endpoint {
slave-mode;
remote-endpoint = <&stm_out_port>;
};
};
};
};
dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-b.dtb dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-b.dtb
dtb-$(CONFIG_ARCH_BCM_IPROC) += ns2-svk.dtb dtb-$(CONFIG_ARCH_BCM_IPROC) += ns2-svk.dtb ns2-xmc.dtb
dtb-$(CONFIG_ARCH_VULCAN) += vulcan-eval.dtb dtb-$(CONFIG_ARCH_VULCAN) += vulcan-eval.dtb
always := $(dtb-y) always := $(dtb-y)
......
...@@ -76,6 +76,10 @@ &pcie4 { ...@@ -76,6 +76,10 @@ &pcie4 {
status = "ok"; status = "ok";
}; };
&pcie8 {
status = "ok";
};
&i2c0 { &i2c0 {
status = "ok"; status = "ok";
}; };
......
/*
* BSD LICENSE
*
* Copyright(c) 2016 Broadcom. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of Broadcom Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/dts-v1/;
#include "ns2.dtsi"
/ {
model = "Broadcom NS2 XMC";
compatible = "brcm,ns2-xmc", "brcm,ns2";
aliases {
serial0 = &uart3;
};
chosen {
stdout-path = "serial0:115200n8";
bootargs = "earlycon=uart8250,mmio32,0x66130000";
};
memory {
device_type = "memory";
reg = <0x000000000 0x80000000 0x00000001 0x00000000>;
};
};
&enet {
status = "ok";
};
&i2c0 {
status = "ok";
};
&i2c1 {
status = "ok";
};
&mdio_mux_iproc {
mdio@10 {
gphy0: eth-phy@10 {
reg = <0x10>;
};
};
};
&nand {
nandcs@0 {
compatible = "brcm,nandcs";
reg = <0>;
nand-ecc-mode = "hw";
nand-ecc-strength = <8>;
nand-ecc-step-size = <512>;
nand-bus-width = <16>;
brcm,nand-oob-sector-size = <16>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "nboot";
reg = <0x00000000 0x00280000>; /* 2.5MB */
read-only;
};
partition@280000 {
label = "nenv";
reg = <0x00280000 0x00040000>; /* 0.25MB */
read-only;
};
partition@2c0000 {
label = "ndtb";
reg = <0x002c0000 0x00040000>; /* 0.25MB */
read-only;
};
partition@300000 {
label = "nsystem";
reg = <0x00300000 0x03d00000>; /* 61MB */
read-only;
};
partition@4000000 {
label = "nrootfs";
reg = <0x04000000 0x06400000>; /* 100MB */
};
partition@0a400000{
label = "ncustfs";
reg = <0x0a400000 0x35c00000>; /* 860MB */
};
};
};
&pci_phy0 {
status = "ok";
};
&pcie0 {
status = "ok";
};
&pcie8 {
status = "ok";
};
&sata_phy0 {
status = "ok";
};
&sata_phy1 {
status = "ok";
};
&sata {
status = "ok";
};
&qspi {
flash: m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "m25p80";
spi-max-frequency = <62500000>;
m25p,default-addr-width = <3>;
reg = <0x0 0x0>;
partition@0 {
label = "bl0";
reg = <0x00000000 0x00080000>; /* 512KB */
};
partition@80000 {
label = "fip";
reg = <0x00080000 0x00150000>; /* 1344KB */
};
partition@1e0000 {
label = "env";
reg = <0x001e0000 0x00010000>;/* 64KB */
};
partition@1f0000 {
label = "dtb";
reg = <0x001f0000 0x00010000>; /* 64KB */
};
partition@200000 {
label = "kernel";
reg = <0x00200000 0x00e00000>; /* 14MB */
};
partition@1000000 {
label = "rootfs";
reg = <0x01000000 0x01000000>; /* 16MB */
};
};
};
&uart3 {
status = "ok";
};
...@@ -30,6 +30,8 @@ ...@@ -30,6 +30,8 @@
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/ */
/memreserve/ 0x81000000 0x00200000;
#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/bcm-ns2.h> #include <dt-bindings/clock/bcm-ns2.h>
...@@ -115,7 +117,7 @@ pcie0: pcie@20020000 { ...@@ -115,7 +117,7 @@ pcie0: pcie@20020000 {
#interrupt-cells = <1>; #interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>; interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 281 IRQ_TYPE_NONE>; interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 281 IRQ_TYPE_NONE>;
linux,pci-domain = <0>; linux,pci-domain = <0>;
...@@ -136,18 +138,7 @@ pcie0: pcie@20020000 { ...@@ -136,18 +138,7 @@ pcie0: pcie@20020000 {
phys = <&pci_phy0>; phys = <&pci_phy0>;
phy-names = "pcie-phy"; phy-names = "pcie-phy";
msi-parent = <&msi0>; msi-parent = <&v2m0>;
msi0: msi@20020000 {
compatible = "brcm,iproc-msi";
msi-controller;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 277 IRQ_TYPE_NONE>,
<GIC_SPI 278 IRQ_TYPE_NONE>,
<GIC_SPI 279 IRQ_TYPE_NONE>,
<GIC_SPI 280 IRQ_TYPE_NONE>;
brcm,num-eq-region = <1>;
brcm,num-msi-msg-region = <1>;
};
}; };
pcie4: pcie@50020000 { pcie4: pcie@50020000 {
...@@ -156,7 +147,7 @@ pcie4: pcie@50020000 { ...@@ -156,7 +147,7 @@ pcie4: pcie@50020000 {
#interrupt-cells = <1>; #interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>; interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 305 IRQ_TYPE_NONE>; interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 305 IRQ_TYPE_NONE>;
linux,pci-domain = <4>; linux,pci-domain = <4>;
...@@ -177,16 +168,24 @@ pcie4: pcie@50020000 { ...@@ -177,16 +168,24 @@ pcie4: pcie@50020000 {
phys = <&pci_phy1>; phys = <&pci_phy1>;
phy-names = "pcie-phy"; phy-names = "pcie-phy";
msi-parent = <&msi4>; msi-parent = <&v2m0>;
msi4: msi@50020000 {
compatible = "brcm,iproc-msi";
msi-controller;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 301 IRQ_TYPE_NONE>,
<GIC_SPI 302 IRQ_TYPE_NONE>,
<GIC_SPI 303 IRQ_TYPE_NONE>,
<GIC_SPI 304 IRQ_TYPE_NONE>;
}; };
pcie8: pcie@60c00000 {
compatible = "brcm,iproc-pcie-paxc";
reg = <0 0x60c00000 0 0x1000>;
linux,pci-domain = <8>;
bus-range = <0x0 0x1>;
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
ranges = <0x83000000 0 0x00000000 0 0x60000000 0 0x00c00000>;
status = "disabled";
msi-parent = <&v2m0>;
}; };
soc: soc { soc: soc {
...@@ -331,6 +330,82 @@ gic: interrupt-controller@65210000 { ...@@ -331,6 +330,82 @@ gic: interrupt-controller@65210000 {
<0x65260000 0x1000>; <0x65260000 0x1000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0xf) | interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0xf) |
IRQ_TYPE_LEVEL_HIGH)>; IRQ_TYPE_LEVEL_HIGH)>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x652e0000 0x80000>;
v2m0: v2m@00000 {
compatible = "arm,gic-v2m-frame";
interrupt-parent = <&gic>;
msi-controller;
reg = <0x00000 0x1000>;
arm,msi-base-spi = <72>;
arm,msi-num-spis = <16>;
};
v2m1: v2m@10000 {
compatible = "arm,gic-v2m-frame";
interrupt-parent = <&gic>;
msi-controller;
reg = <0x10000 0x1000>;
arm,msi-base-spi = <88>;
arm,msi-num-spis = <16>;
};
v2m2: v2m@20000 {
compatible = "arm,gic-v2m-frame";
interrupt-parent = <&gic>;
msi-controller;
reg = <0x20000 0x1000>;
arm,msi-base-spi = <104>;
arm,msi-num-spis = <16>;
};
v2m3: v2m@30000 {
compatible = "arm,gic-v2m-frame";
interrupt-parent = <&gic>;
msi-controller;
reg = <0x30000 0x1000>;
arm,msi-base-spi = <120>;
arm,msi-num-spis = <16>;
};
v2m4: v2m@40000 {
compatible = "arm,gic-v2m-frame";
interrupt-parent = <&gic>;
msi-controller;
reg = <0x40000 0x1000>;
arm,msi-base-spi = <136>;
arm,msi-num-spis = <16>;
};
v2m5: v2m@50000 {
compatible = "arm,gic-v2m-frame";
interrupt-parent = <&gic>;
msi-controller;
reg = <0x50000 0x1000>;
arm,msi-base-spi = <152>;
arm,msi-num-spis = <16>;
};
v2m6: v2m@60000 {
compatible = "arm,gic-v2m-frame";
interrupt-parent = <&gic>;
msi-controller;
reg = <0x60000 0x1000>;
arm,msi-base-spi = <168>;
arm,msi-num-spis = <16>;
};
v2m7: v2m@70000 {
compatible = "arm,gic-v2m-frame";
interrupt-parent = <&gic>;
msi-controller;
reg = <0x70000 0x1000>;
arm,msi-base-spi = <184>;
arm,msi-num-spis = <16>;
};
}; };
cci@65590000 { cci@65590000 {
......
/*
* Samsung's Exynos5433 SoC Memory interface and AMBA bus device tree source
*
* Copyright (c) 2016 Samsung Electronics Co., Ltd.
* Chanwoo Choi <cw00.choi@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
&soc {
bus_g2d_400: bus0 {
compatible = "samsung,exynos-bus";
clocks = <&cmu_top CLK_ACLK_G2D_400>;
clock-names = "bus";
operating-points-v2 = <&bus_g2d_400_opp_table>;
status = "disabled";
};
bus_g2d_266: bus1 {
compatible = "samsung,exynos-bus";
clocks = <&cmu_top CLK_ACLK_G2D_266>;
clock-names = "bus";
operating-points-v2 = <&bus_g2d_266_opp_table>;
status = "disabled";
};
bus_gscl: bus2 {
compatible = "samsung,exynos-bus";
clocks = <&cmu_top CLK_ACLK_GSCL_333>;
clock-names = "bus";
operating-points-v2 = <&bus_gscl_opp_table>;
status = "disabled";
};
bus_hevc: bus3 {
compatible = "samsung,exynos-bus";
clocks = <&cmu_top CLK_ACLK_HEVC_400>;
clock-names = "bus";
operating-points-v2 = <&bus_hevc_opp_table>;
status = "disabled";
};
bus_jpeg: bus4 {
compatible = "samsung,exynos-bus";
clocks = <&cmu_top CLK_SCLK_JPEG_MSCL>;
clock-names = "bus";
operating-points-v2 = <&bus_g2d_400_opp_table>;
status = "disabled";
};
bus_mfc: bus5 {
compatible = "samsung,exynos-bus";
clocks = <&cmu_top CLK_ACLK_MFC_400>;
clock-names = "bus";
operating-points-v2 = <&bus_g2d_400_opp_table>;
status = "disabled";
};
bus_mscl: bus6 {
compatible = "samsung,exynos-bus";
clocks = <&cmu_top CLK_ACLK_MSCL_400>;
clock-names = "bus";
operating-points-v2 = <&bus_g2d_400_opp_table>;
status = "disabled";
};
bus_noc0: bus7 {
compatible = "samsung,exynos-bus";
clocks = <&cmu_top CLK_ACLK_BUS0_400>;
clock-names = "bus";
operating-points-v2 = <&bus_hevc_opp_table>;
status = "disabled";
};
bus_noc1: bus8 {
compatible = "samsung,exynos-bus";
clocks = <&cmu_top CLK_ACLK_BUS1_400>;
clock-names = "bus";
operating-points-v2 = <&bus_hevc_opp_table>;
status = "disabled";
};
bus_noc2: bus9 {
compatible = "samsung,exynos-bus";
clocks = <&cmu_mif CLK_ACLK_BUS2_400>;
clock-names = "bus";
operating-points-v2 = <&bus_noc2_opp_table>;
status = "disabled";
};
bus_g2d_400_opp_table: opp_table2 {
compatible = "operating-points-v2";
opp-shared;
opp@400000000 {
opp-hz = /bits/ 64 <400000000>;
opp-microvolt = <1075000>;
};
opp@267000000 {
opp-hz = /bits/ 64 <267000000>;
opp-microvolt = <1000000>;
};
opp@200000000 {
opp-hz = /bits/ 64 <200000000>;
opp-microvolt = <975000>;
};
opp@160000000 {
opp-hz = /bits/ 64 <160000000>;
opp-microvolt = <962500>;
};
opp@134000000 {
opp-hz = /bits/ 64 <134000000>;
opp-microvolt = <950000>;
};
opp@100000000 {
opp-hz = /bits/ 64 <100000000>;
opp-microvolt = <937500>;
};
};
bus_g2d_266_opp_table: opp_table3 {
compatible = "operating-points-v2";
opp@267000000 {
opp-hz = /bits/ 64 <267000000>;
};
opp@200000000 {
opp-hz = /bits/ 64 <200000000>;
};
opp@160000000 {
opp-hz = /bits/ 64 <160000000>;
};
opp@134000000 {
opp-hz = /bits/ 64 <134000000>;
};
opp@100000000 {
opp-hz = /bits/ 64 <100000000>;
};
};
bus_gscl_opp_table: opp_table4 {
compatible = "operating-points-v2";
opp@333000000 {
opp-hz = /bits/ 64 <333000000>;
};
opp@222000000 {
opp-hz = /bits/ 64 <222000000>;
};
opp@166500000 {
opp-hz = /bits/ 64 <166500000>;
};
};
bus_hevc_opp_table: opp_table5 {
compatible = "operating-points-v2";
opp-shared;
opp@400000000 {
opp-hz = /bits/ 64 <400000000>;
};
opp@267000000 {
opp-hz = /bits/ 64 <267000000>;
};
opp@200000000 {
opp-hz = /bits/ 64 <200000000>;
};
opp@160000000 {
opp-hz = /bits/ 64 <160000000>;
};
opp@134000000 {
opp-hz = /bits/ 64 <134000000>;
};
opp@100000000 {
opp-hz = /bits/ 64 <100000000>;
};
};
bus_noc2_opp_table: opp_table6 {
compatible = "operating-points-v2";
opp@400000000 {
opp-hz = /bits/ 64 <400000000>;
};
opp@200000000 {
opp-hz = /bits/ 64 <200000000>;
};
opp@134000000 {
opp-hz = /bits/ 64 <134000000>;
};
opp@100000000 {
opp-hz = /bits/ 64 <100000000>;
};
};
};
This diff is collapsed.
...@@ -11,23 +11,13 @@ ...@@ -11,23 +11,13 @@
* published by the Free Software Foundation. * published by the Free Software Foundation.
*/ */
#include "exynos5433-tm2.dts" #include "exynos5433-tm2-common.dtsi"
/ { / {
model = "Samsung TM2E board"; model = "Samsung TM2E board";
compatible = "samsung,tm2e", "samsung,exynos5433"; compatible = "samsung,tm2e", "samsung,exynos5433";
}; };
&ldo23_reg {
regulator-name = "CAM_SEN_CORE_1.025V_AP";
regulator-max-microvolt = <1050000>;
};
&ldo25_reg {
regulator-name = "UNUSED_LDO25";
regulator-always-off;
};
&ldo31_reg { &ldo31_reg {
regulator-name = "TSP_VDD_1.8V_AP"; regulator-name = "TSP_VDD_1.8V_AP";
regulator-min-microvolt = <1800000>; regulator-min-microvolt = <1800000>;
......
...@@ -299,7 +299,7 @@ cmu_peric: clock-controller@14c80000 { ...@@ -299,7 +299,7 @@ cmu_peric: clock-controller@14c80000 {
#clock-cells = <1>; #clock-cells = <1>;
}; };
cmu_peris: clock-controller@0x10040000 { cmu_peris: clock-controller@10040000 {
compatible = "samsung,exynos5433-cmu-peris"; compatible = "samsung,exynos5433-cmu-peris";
reg = <0x10040000 0x1000>; reg = <0x10040000 0x1000>;
#clock-cells = <1>; #clock-cells = <1>;
...@@ -599,6 +599,30 @@ mct@101c0000 { ...@@ -599,6 +599,30 @@ mct@101c0000 {
clock-names = "fin_pll", "mct"; clock-names = "fin_pll", "mct";
}; };
ppmu_d0_cpu: ppmu@10480000 {
compatible = "samsung,exynos-ppmu-v2";
reg = <0x10480000 0x2000>;
status = "disabled";
};
ppmu_d0_general: ppmu@10490000 {
compatible = "samsung,exynos-ppmu-v2";
reg = <0x10490000 0x2000>;
status = "disabled";
};
ppmu_d1_cpu: ppmu@104b0000 {
compatible = "samsung,exynos-ppmu-v2";
reg = <0x104b0000 0x2000>;
status = "disabled";
};
ppmu_d1_general: ppmu@104c0000 {
compatible = "samsung,exynos-ppmu-v2";
reg = <0x104c0000 0x2000>;
status = "disabled";
};
pinctrl_alive: pinctrl@10580000 { pinctrl_alive: pinctrl@10580000 {
compatible = "samsung,exynos5433-pinctrl"; compatible = "samsung,exynos5433-pinctrl";
reg = <0x10580000 0x1a20>, <0x11090000 0x100>; reg = <0x10580000 0x1a20>, <0x11090000 0x100>;
...@@ -682,7 +706,7 @@ gic: interrupt-controller@11001000 { ...@@ -682,7 +706,7 @@ gic: interrupt-controller@11001000 {
interrupts = <GIC_PPI 9 0xf04>; interrupts = <GIC_PPI 9 0xf04>;
}; };
mipi_phy: video-phy@105c0710 { mipi_phy: video-phy {
compatible = "samsung,exynos5433-mipi-video-phy"; compatible = "samsung,exynos5433-mipi-video-phy";
#phy-cells = <1>; #phy-cells = <1>;
samsung,pmu-syscon = <&pmu_system_controller>; samsung,pmu-syscon = <&pmu_system_controller>;
...@@ -727,6 +751,29 @@ decon_to_mic: endpoint { ...@@ -727,6 +751,29 @@ decon_to_mic: endpoint {
}; };
}; };
decon_tv: decon@13880000 {
compatible = "samsung,exynos5433-decon-tv";
reg = <0x13880000 0x20b8>;
clocks = <&cmu_disp CLK_PCLK_DECON_TV>,
<&cmu_disp CLK_ACLK_DECON_TV>,
<&cmu_disp CLK_ACLK_SMMU_TV0X>,
<&cmu_disp CLK_ACLK_XIU_TV0X>,
<&cmu_disp CLK_PCLK_SMMU_TV0X>,
<&cmu_disp CLK_SCLK_DECON_TV_VCLK>,
<&cmu_disp CLK_SCLK_DECON_TV_ECLK>;
clock-names = "pclk", "aclk_decon", "aclk_smmu_decon0x",
"aclk_xiu_decon0x", "pclk_smmu_decon0x",
"sclk_decon_vclk", "sclk_decon_eclk";
samsung,disp-sysreg = <&syscon_disp>;
interrupt-names = "fifo", "vsync", "lcd_sys";
interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
iommus = <&sysmmu_tv0x>, <&sysmmu_tv1x>;
iommu-names = "m0", "m1";
};
dsi: dsi@13900000 { dsi: dsi@13900000 {
compatible = "samsung,exynos5433-mipi-dsi"; compatible = "samsung,exynos5433-mipi-dsi";
reg = <0x13900000 0xC0>; reg = <0x13900000 0xC0>;
...@@ -790,6 +837,35 @@ mic_to_dsi: endpoint { ...@@ -790,6 +837,35 @@ mic_to_dsi: endpoint {
}; };
}; };
hdmi: hdmi@13970000 {
compatible = "samsung,exynos5433-hdmi";
reg = <0x13970000 0x70000>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu_disp CLK_PCLK_HDMI>,
<&cmu_disp CLK_PCLK_HDMIPHY>,
<&cmu_disp CLK_PHYCLK_HDMIPHY_TMDS_CLKO>,
<&cmu_disp CLK_PHYCLK_HDMI_PIXEL>,
<&cmu_disp CLK_PHYCLK_HDMIPHY_TMDS_CLKO_PHY>,
<&cmu_disp CLK_MOUT_PHYCLK_HDMIPHY_TMDS_CLKO_USER>,
<&cmu_disp CLK_PHYCLK_HDMIPHY_PIXEL_CLKO_PHY>,
<&cmu_disp CLK_MOUT_PHYCLK_HDMIPHY_PIXEL_CLKO_USER>,
<&xxti>, <&cmu_disp CLK_SCLK_HDMI_SPDIF>;
clock-names = "hdmi_pclk", "hdmi_i_pclk",
"i_tmds_clk", "i_pixel_clk",
"tmds_clko", "tmds_clko_user",
"pixel_clko", "pixel_clko_user",
"oscclk", "i_spdif_clk";
phy = <&hdmiphy>;
ddc = <&hsi2c_11>;
samsung,syscon-phandle = <&pmu_system_controller>;
samsung,sysreg-phandle = <&syscon_disp>;
status = "disabled";
};
hdmiphy: hdmiphy@13af0000 {
reg = <0x13af0000 0x80>;
};
syscon_disp: syscon@13b80000 { syscon_disp: syscon@13b80000 {
compatible = "syscon"; compatible = "syscon";
reg = <0x13b80000 0x1010>; reg = <0x13b80000 0x1010>;
...@@ -868,7 +944,7 @@ mfc: codec@152E0000 { ...@@ -868,7 +944,7 @@ mfc: codec@152E0000 {
iommu-names = "left", "right"; iommu-names = "left", "right";
}; };
sysmmu_decon0x: sysmmu@0x13a00000 { sysmmu_decon0x: sysmmu@13a00000 {
compatible = "samsung,exynos-sysmmu"; compatible = "samsung,exynos-sysmmu";
reg = <0x13a00000 0x1000>; reg = <0x13a00000 0x1000>;
interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
...@@ -878,7 +954,7 @@ sysmmu_decon0x: sysmmu@0x13a00000 { ...@@ -878,7 +954,7 @@ sysmmu_decon0x: sysmmu@0x13a00000 {
#iommu-cells = <0>; #iommu-cells = <0>;
}; };
sysmmu_decon1x: sysmmu@0x13a10000 { sysmmu_decon1x: sysmmu@13a10000 {
compatible = "samsung,exynos-sysmmu"; compatible = "samsung,exynos-sysmmu";
reg = <0x13a10000 0x1000>; reg = <0x13a10000 0x1000>;
interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
...@@ -888,7 +964,27 @@ sysmmu_decon1x: sysmmu@0x13a10000 { ...@@ -888,7 +964,27 @@ sysmmu_decon1x: sysmmu@0x13a10000 {
#iommu-cells = <0>; #iommu-cells = <0>;
}; };
sysmmu_gscl0: sysmmu@0x13C80000 { sysmmu_tv0x: sysmmu@13a20000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x13a20000 0x1000>;
interrupts = <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "pclk", "aclk";
clocks = <&cmu_disp CLK_PCLK_SMMU_TV0X>,
<&cmu_disp CLK_ACLK_SMMU_TV0X>;
#iommu-cells = <0>;
};
sysmmu_tv1x: sysmmu@13a30000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x13a30000 0x1000>;
interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "pclk", "aclk";
clocks = <&cmu_disp CLK_PCLK_SMMU_TV1X>,
<&cmu_disp CLK_ACLK_SMMU_TV1X>;
#iommu-cells = <0>;
};
sysmmu_gscl0: sysmmu@13c80000 {
compatible = "samsung,exynos-sysmmu"; compatible = "samsung,exynos-sysmmu";
reg = <0x13C80000 0x1000>; reg = <0x13C80000 0x1000>;
interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
...@@ -898,7 +994,7 @@ sysmmu_gscl0: sysmmu@0x13C80000 { ...@@ -898,7 +994,7 @@ sysmmu_gscl0: sysmmu@0x13C80000 {
#iommu-cells = <0>; #iommu-cells = <0>;
}; };
sysmmu_gscl1: sysmmu@0x13C90000 { sysmmu_gscl1: sysmmu@13c90000 {
compatible = "samsung,exynos-sysmmu"; compatible = "samsung,exynos-sysmmu";
reg = <0x13C90000 0x1000>; reg = <0x13C90000 0x1000>;
interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
...@@ -908,7 +1004,7 @@ sysmmu_gscl1: sysmmu@0x13C90000 { ...@@ -908,7 +1004,7 @@ sysmmu_gscl1: sysmmu@0x13C90000 {
#iommu-cells = <0>; #iommu-cells = <0>;
}; };
sysmmu_gscl2: sysmmu@0x13CA0000 { sysmmu_gscl2: sysmmu@13ca0000 {
compatible = "samsung,exynos-sysmmu"; compatible = "samsung,exynos-sysmmu";
reg = <0x13CA0000 0x1000>; reg = <0x13CA0000 0x1000>;
interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>;
...@@ -918,7 +1014,7 @@ sysmmu_gscl2: sysmmu@0x13CA0000 { ...@@ -918,7 +1014,7 @@ sysmmu_gscl2: sysmmu@0x13CA0000 {
#iommu-cells = <0>; #iommu-cells = <0>;
}; };
sysmmu_jpeg: sysmmu@0x15060000 { sysmmu_jpeg: sysmmu@15060000 {
compatible = "samsung,exynos-sysmmu"; compatible = "samsung,exynos-sysmmu";
reg = <0x15060000 0x1000>; reg = <0x15060000 0x1000>;
interrupts = <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
...@@ -928,7 +1024,7 @@ sysmmu_jpeg: sysmmu@0x15060000 { ...@@ -928,7 +1024,7 @@ sysmmu_jpeg: sysmmu@0x15060000 {
#iommu-cells = <0>; #iommu-cells = <0>;
}; };
sysmmu_mfc_0: sysmmu@0x15200000 { sysmmu_mfc_0: sysmmu@15200000 {
compatible = "samsung,exynos-sysmmu"; compatible = "samsung,exynos-sysmmu";
reg = <0x15200000 0x1000>; reg = <0x15200000 0x1000>;
interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
...@@ -938,7 +1034,7 @@ sysmmu_mfc_0: sysmmu@0x15200000 { ...@@ -938,7 +1034,7 @@ sysmmu_mfc_0: sysmmu@0x15200000 {
#iommu-cells = <0>; #iommu-cells = <0>;
}; };
sysmmu_mfc_1: sysmmu@0x15210000 { sysmmu_mfc_1: sysmmu@15210000 {
compatible = "samsung,exynos-sysmmu"; compatible = "samsung,exynos-sysmmu";
reg = <0x15210000 0x1000>; reg = <0x15210000 0x1000>;
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
...@@ -1261,7 +1357,7 @@ hsi2c_11: hsi2c@14df0000 { ...@@ -1261,7 +1357,7 @@ hsi2c_11: hsi2c@14df0000 {
status = "disabled"; status = "disabled";
}; };
usbdrd30: usb@15400000 { usbdrd30: usbdrd {
compatible = "samsung,exynos5250-dwusb3"; compatible = "samsung,exynos5250-dwusb3";
clocks = <&cmu_fsys CLK_ACLK_USBDRD30>, clocks = <&cmu_fsys CLK_ACLK_USBDRD30>,
<&cmu_fsys CLK_SCLK_USBDRD30>; <&cmu_fsys CLK_SCLK_USBDRD30>;
...@@ -1308,7 +1404,7 @@ usbhost30_phy: phy@15580000 { ...@@ -1308,7 +1404,7 @@ usbhost30_phy: phy@15580000 {
status = "disabled"; status = "disabled";
}; };
usbhost30: usb@15a00000 { usbhost30: usbhost {
compatible = "samsung,exynos5250-dwusb3"; compatible = "samsung,exynos5250-dwusb3";
clocks = <&cmu_fsys CLK_ACLK_USBHOST30>, clocks = <&cmu_fsys CLK_ACLK_USBHOST30>,
<&cmu_fsys CLK_SCLK_USBHOST30>; <&cmu_fsys CLK_SCLK_USBHOST30>;
...@@ -1398,6 +1494,8 @@ pdma1: pdma@15600000 { ...@@ -1398,6 +1494,8 @@ pdma1: pdma@15600000 {
audio-subsystem@11400000 { audio-subsystem@11400000 {
compatible = "samsung,exynos5433-lpass"; compatible = "samsung,exynos5433-lpass";
reg = <0x11400000 0x100>, <0x11500000 0x08>; reg = <0x11400000 0x100>, <0x11500000 0x08>;
clocks = <&cmu_aud CLK_PCLK_SFR0_CTRL>;
clock-names = "sfr0_ctrl";
samsung,pmu-syscon = <&pmu_system_controller>; samsung,pmu-syscon = <&pmu_system_controller>;
#address-cells = <1>; #address-cells = <1>;
#size-cells = <1>; #size-cells = <1>;
...@@ -1458,5 +1556,6 @@ timer: timer { ...@@ -1458,5 +1556,6 @@ timer: timer {
}; };
}; };
#include "exynos5433-bus.dtsi"
#include "exynos5433-pinctrl.dtsi" #include "exynos5433-pinctrl.dtsi"
#include "exynos5433-tmu.dtsi" #include "exynos5433-tmu.dtsi"
...@@ -497,49 +497,49 @@ sd0_clk: sd0-clk { ...@@ -497,49 +497,49 @@ sd0_clk: sd0-clk {
samsung,pins = "gpr0-0"; samsung,pins = "gpr0-0";
samsung,pin-function = <2>; samsung,pin-function = <2>;
samsung,pin-pud = <0>; samsung,pin-pud = <0>;
samsung,pin-drv = <3>; samsung,pin-drv = <4>;
}; };
sd0_cmd: sd0-cmd { sd0_cmd: sd0-cmd {
samsung,pins = "gpr0-1"; samsung,pins = "gpr0-1";
samsung,pin-function = <2>; samsung,pin-function = <2>;
samsung,pin-pud = <3>; samsung,pin-pud = <3>;
samsung,pin-drv = <3>; samsung,pin-drv = <4>;
}; };
sd0_ds: sd0-ds { sd0_ds: sd0-ds {
samsung,pins = "gpr0-2"; samsung,pins = "gpr0-2";
samsung,pin-function = <2>; samsung,pin-function = <2>;
samsung,pin-pud = <1>; samsung,pin-pud = <1>;
samsung,pin-drv = <3>; samsung,pin-drv = <4>;
}; };
sd0_qrdy: sd0-qrdy { sd0_qrdy: sd0-qrdy {
samsung,pins = "gpr0-3"; samsung,pins = "gpr0-3";
samsung,pin-function = <2>; samsung,pin-function = <2>;
samsung,pin-pud = <1>; samsung,pin-pud = <1>;
samsung,pin-drv = <3>; samsung,pin-drv = <4>;
}; };
sd0_bus1: sd0-bus-width1 { sd0_bus1: sd0-bus-width1 {
samsung,pins = "gpr1-0"; samsung,pins = "gpr1-0";
samsung,pin-function = <2>; samsung,pin-function = <2>;
samsung,pin-pud = <3>; samsung,pin-pud = <3>;
samsung,pin-drv = <3>; samsung,pin-drv = <4>;
}; };
sd0_bus4: sd0-bus-width4 { sd0_bus4: sd0-bus-width4 {
samsung,pins = "gpr1-1", "gpr1-2", "gpr1-3"; samsung,pins = "gpr1-1", "gpr1-2", "gpr1-3";
samsung,pin-function = <2>; samsung,pin-function = <2>;
samsung,pin-pud = <3>; samsung,pin-pud = <3>;
samsung,pin-drv = <3>; samsung,pin-drv = <4>;
}; };
sd0_bus8: sd0-bus-width8 { sd0_bus8: sd0-bus-width8 {
samsung,pins = "gpr1-4", "gpr1-5", "gpr1-6", "gpr1-7"; samsung,pins = "gpr1-4", "gpr1-5", "gpr1-6", "gpr1-7";
samsung,pin-function = <2>; samsung,pin-function = <2>;
samsung,pin-pud = <3>; samsung,pin-pud = <3>;
samsung,pin-drv = <3>; samsung,pin-drv = <4>;
}; };
sd1_clk: sd1-clk { sd1_clk: sd1-clk {
......
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb
......
/*
* Device Tree file for Freescale LS1012A Freedom Board.
*
* Copyright 2016, Freescale Semiconductor
*
* This file is dual-licensed: you can use it either under the terms
* of the GPLv2 or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "fsl-ls1012a.dtsi"
/ {
model = "LS1012A Freedom Board";
compatible = "fsl,ls1012a-frdm", "fsl,ls1012a";
sys_mclk: clock-mclk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <25000000>;
};
reg_1p8v: regulator-1p8v {
compatible = "regulator-fixed";
regulator-name = "1P8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
sound {
compatible = "simple-audio-card";
simple-audio-card,format = "i2s";
simple-audio-card,widgets =
"Microphone", "Microphone Jack",
"Headphone", "Headphone Jack",
"Speaker", "Speaker Ext",
"Line", "Line In Jack";
simple-audio-card,routing =
"MIC_IN", "Microphone Jack",
"Microphone Jack", "Mic Bias",
"LINE_IN", "Line In Jack",
"Headphone Jack", "HP_OUT",
"Speaker Ext", "LINE_OUT";
simple-audio-card,cpu {
sound-dai = <&sai2>;
frame-master;
bitclock-master;
};
simple-audio-card,codec {
sound-dai = <&codec>;
frame-master;
bitclock-master;
system-clock-frequency = <25000000>;
};
};
};
&duart0 {
status = "okay";
};
&i2c0 {
status = "okay";
codec: sgtl5000@a {
#sound-dai-cells = <0>;
compatible = "fsl,sgtl5000";
reg = <0xa>;
VDDA-supply = <&reg_1p8v>;
VDDIO-supply = <&reg_1p8v>;
clocks = <&sys_mclk>;
};
};
&sai2 {
status = "okay";
};
/*
* Device Tree file for Freescale LS1012A QDS Board.
*
* Copyright 2016, Freescale Semiconductor
*
* This file is dual-licensed: you can use it either under the terms
* of the GPLv2 or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "fsl-ls1012a.dtsi"
/ {
model = "LS1012A QDS Board";
compatible = "fsl,ls1012a-qds", "fsl,ls1012a";
sys_mclk: clock-mclk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24576000>;
};
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
sound {
compatible = "simple-audio-card";
simple-audio-card,format = "i2s";
simple-audio-card,widgets =
"Microphone", "Microphone Jack",
"Headphone", "Headphone Jack",
"Speaker", "Speaker Ext",
"Line", "Line In Jack";
simple-audio-card,routing =
"MIC_IN", "Microphone Jack",
"Microphone Jack", "Mic Bias",
"LINE_IN", "Line In Jack",
"Headphone Jack", "HP_OUT",
"Speaker Ext", "LINE_OUT";
simple-audio-card,cpu {
sound-dai = <&sai2>;
frame-master;
bitclock-master;
};
simple-audio-card,codec {
sound-dai = <&codec>;
frame-master;
bitclock-master;
system-clock-frequency = <24576000>;
};
};
};
&duart0 {
status = "okay";
};
&i2c0 {
status = "okay";
pca9547@77 {
compatible = "nxp,pca9547";
reg = <0x77>;
#address-cells = <1>;
#size-cells = <0>;
i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x4>;
codec: sgtl5000@a {
#sound-dai-cells = <0>;
compatible = "fsl,sgtl5000";
reg = <0xa>;
VDDA-supply = <&reg_3p3v>;
VDDIO-supply = <&reg_3p3v>;
clocks = <&sys_mclk>;
};
};
};
};
&sai2 {
status = "okay";
};
/*
* Device Tree file for Freescale LS1012A RDB Board.
*
* Copyright 2016, Freescale Semiconductor
*
* This file is dual-licensed: you can use it either under the terms
* of the GPLv2 or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "fsl-ls1012a.dtsi"
/ {
model = "LS1012A RDB Board";
compatible = "fsl,ls1012a-rdb", "fsl,ls1012a";
};
&duart0 {
status = "okay";
};
&i2c0 {
status = "okay";
};
This diff is collapsed.
...@@ -45,6 +45,7 @@ ...@@ -45,6 +45,7 @@
*/ */
#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/thermal/thermal.h>
/ { / {
compatible = "fsl,ls1046a"; compatible = "fsl,ls1046a";
...@@ -67,6 +68,7 @@ cpu0: cpu@0 { ...@@ -67,6 +68,7 @@ cpu0: cpu@0 {
clocks = <&clockgen 1 0>; clocks = <&clockgen 1 0>;
next-level-cache = <&l2>; next-level-cache = <&l2>;
cpu-idle-states = <&CPU_PH20>; cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
}; };
cpu1: cpu@1 { cpu1: cpu@1 {
...@@ -279,6 +281,84 @@ clockgen: clocking@1ee1000 { ...@@ -279,6 +281,84 @@ clockgen: clocking@1ee1000 {
clocks = <&sysclk>; clocks = <&sysclk>;
}; };
tmu: tmu@1f00000 {
compatible = "fsl,qoriq-tmu";
reg = <0x0 0x1f00000 0x0 0x10000>;
interrupts = <0 33 0x4>;
fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
fsl,tmu-calibration =
/* Calibration data group 1 */
<0x00000000 0x00000026
0x00000001 0x0000002d
0x00000002 0x00000032
0x00000003 0x00000039
0x00000004 0x0000003f
0x00000005 0x00000046
0x00000006 0x0000004d
0x00000007 0x00000054
0x00000008 0x0000005a
0x00000009 0x00000061
0x0000000a 0x0000006a
0x0000000b 0x00000071
/* Calibration data group 2 */
0x00010000 0x00000025
0x00010001 0x0000002c
0x00010002 0x00000035
0x00010003 0x0000003d
0x00010004 0x00000045
0x00010005 0x0000004e
0x00010006 0x00000057
0x00010007 0x00000061
0x00010008 0x0000006b
0x00010009 0x00000076
/* Calibration data group 3 */
0x00020000 0x00000029
0x00020001 0x00000033
0x00020002 0x0000003d
0x00020003 0x00000049
0x00020004 0x00000056
0x00020005 0x00000061
0x00020006 0x0000006d
/* Calibration data group 4 */
0x00030000 0x00000021
0x00030001 0x0000002a
0x00030002 0x0000003c
0x00030003 0x0000004e>;
big-endian;
#thermal-sensor-cells = <1>;
};
thermal-zones {
cpu_thermal: cpu-thermal {
polling-delay-passive = <1000>;
polling-delay = <5000>;
thermal-sensors = <&tmu 3>;
trips {
cpu_alert: cpu-alert {
temperature = <85000>;
hysteresis = <2000>;
type = "passive";
};
cpu_crit: cpu-crit {
temperature = <95000>;
hysteresis = <2000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu_alert>;
cooling-device =
<&cpu0 THERMAL_NO_LIMIT
THERMAL_NO_LIMIT>;
};
};
};
};
dspi: dspi@2100000 { dspi: dspi@2100000 {
compatible = "fsl,ls1021a-v1.0-dspi"; compatible = "fsl,ls1021a-v1.0-dspi";
#address-cells = <1>; #address-cells = <1>;
......
...@@ -102,7 +102,6 @@ pca9547@75 { ...@@ -102,7 +102,6 @@ pca9547@75 {
reg = <0x75>; reg = <0x75>;
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
status = "disabled";
i2c@1 { i2c@1 {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
......
dtb-$(CONFIG_ARCH_HISI) += hi3660-hikey960.dtb
dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb
dtb-$(CONFIG_ARCH_HISI) += hip05-d02.dtb dtb-$(CONFIG_ARCH_HISI) += hip05-d02.dtb
dtb-$(CONFIG_ARCH_HISI) += hip06-d03.dtb dtb-$(CONFIG_ARCH_HISI) += hip06-d03.dtb
......
/*
* dts file for Hisilicon HiKey960 Development Board
*
* Copyright (C) 2016, Hisilicon Ltd.
*
*/
/dts-v1/;
#include "hi3660.dtsi"
/ {
model = "HiKey960";
compatible = "hisilicon,hi3660";
aliases {
serial5 = &uart5; /* console UART */
};
chosen {
stdout-path = "serial5:115200n8";
};
memory@0 {
device_type = "memory";
/* rewrite this at bootloader */
reg = <0x0 0x0 0x0 0x0>;
};
};
&uart5 {
status = "okay";
};
This diff is collapsed.
...@@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb ...@@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-7040-db.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-7040-db.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-db.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-db.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-mcbin.dtb
always := $(dtb-y) always := $(dtb-y)
subdir-y := $(dts-dirs) subdir-y := $(dts-dirs)
......
This diff is collapsed.
...@@ -74,13 +74,14 @@ cpm_syscon0: system-controller@440000 { ...@@ -74,13 +74,14 @@ cpm_syscon0: system-controller@440000 {
"cpm-gop-dp", "none", "cpm-pcie_x10", "cpm-gop-dp", "none", "cpm-pcie_x10",
"cpm-pcie_x11", "cpm-pcie_x4", "cpm-pcie-xor", "cpm-pcie_x11", "cpm-pcie_x4", "cpm-pcie-xor",
"cpm-sata", "cpm-sata-usb", "cpm-main", "cpm-sata", "cpm-sata-usb", "cpm-main",
"cpm-sd-mmc", "none", "none", "cpm-sd-mmc-gop", "none", "none",
"cpm-slow-io", "cpm-usb3h0", "cpm-usb3h1", "cpm-slow-io", "cpm-usb3h0", "cpm-usb3h1",
"cpm-usb3dev", "cpm-eip150", "cpm-eip197"; "cpm-usb3dev", "cpm-eip150", "cpm-eip197";
}; };
cpm_sata0: sata@540000 { cpm_sata0: sata@540000 {
compatible = "marvell,armada-8k-ahci"; compatible = "marvell,armada-8k-ahci",
"generic-ahci";
reg = <0x540000 0x30000>; reg = <0x540000 0x30000>;
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpm_syscon0 1 15>; clocks = <&cpm_syscon0 1 15>;
......
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
...@@ -277,6 +277,8 @@ &rcar_sound { ...@@ -277,6 +277,8 @@ &rcar_sound {
<&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
<&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
<&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
<&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
<&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
<&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
<&audio_clk_a>, <&cs2000>, <&audio_clk_a>, <&cs2000>,
<&audio_clk_c>, <&audio_clk_c>,
......
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment