soc: bcm2835: sync firmware properties with downstream

Add latest firmware property tags from the latest Raspberry Pi downstream
kernel. This is needed to use the reboot notify in the following
commit.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

include/soc/bcm2835/raspberrypi-firmware.h

@@ -73,6 +73,8 @@ enum rpi_firmware_property_tag {
 	RPI_FIRMWARE_GET_CUSTOMER_OTP =                       0x00030021,
 	RPI_FIRMWARE_GET_DOMAIN_STATE =                       0x00030030,
 	RPI_FIRMWARE_GET_THROTTLED =                          0x00030046,
+	RPI_FIRMWARE_GET_CLOCK_MEASURED =                     0x00030047,
+	RPI_FIRMWARE_NOTIFY_REBOOT =                          0x00030048,
 	RPI_FIRMWARE_SET_CLOCK_STATE =                        0x00038001,
 	RPI_FIRMWARE_SET_CLOCK_RATE =                         0x00038002,
 	RPI_FIRMWARE_SET_VOLTAGE =                            0x00038003,
@@ -86,6 +88,8 @@ enum rpi_firmware_property_tag {
 	RPI_FIRMWARE_SET_GPIO_CONFIG =                        0x00038043,
 	RPI_FIRMWARE_GET_PERIPH_REG =                         0x00030045,
 	RPI_FIRMWARE_SET_PERIPH_REG =                         0x00038045,
+	RPI_FIRMWARE_GET_POE_HAT_VAL =                        0x00030049,
+	RPI_FIRMWARE_SET_POE_HAT_VAL =                        0x00030050,
 
 
 	/* Dispmanx TAGS */