Commit c68308dd authored by Wolfram Sang's avatar Wolfram Sang Committed by Anatolij Gustschin

gpio: move mpc8xxx/512x gpio driver to drivers/gpio

Move the driver to the place where it is expected to be nowadays. Also
rename its CONFIG-name to match the rest and adapt the defconfigs.
Finally, move selection of REQUIRE_GPIOLIB or WANTS_OPTIONAL_GPIOLIB to
the platforms, because this option is per-platform and not per-driver.
Signed-off-by: default avatarWolfram Sang <w.sang@pengutronix.de>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: default avatarGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: default avatarAnatolij Gustschin <agust@denx.de>
parent 40dc7e8b
......@@ -24,7 +24,7 @@ CONFIG_P1023_RDS=y
CONFIG_QUICC_ENGINE=y
CONFIG_QE_GPIO=y
CONFIG_CPM2=y
CONFIG_MPC8xxx_GPIO=y
CONFIG_GPIO_MPC8XXX=y
CONFIG_HIGHMEM=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
......
......@@ -20,7 +20,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_XES_MPC85xx=y
CONFIG_MPC8xxx_GPIO=y
CONFIG_GPIO_MPC8XXX=y
CONFIG_HIGHMEM=y
CONFIG_MATH_EMULATION=y
CONFIG_SPARSE_IRQ=y
......
......@@ -41,7 +41,7 @@ CONFIG_TQM8560=y
CONFIG_SBC8548=y
CONFIG_QUICC_ENGINE=y
CONFIG_QE_GPIO=y
CONFIG_MPC8xxx_GPIO=y
CONFIG_GPIO_MPC8XXX=y
CONFIG_HIGHMEM=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
......
......@@ -42,7 +42,7 @@ CONFIG_TQM8560=y
CONFIG_SBC8548=y
CONFIG_QUICC_ENGINE=y
CONFIG_QE_GPIO=y
CONFIG_MPC8xxx_GPIO=y
CONFIG_GPIO_MPC8XXX=y
CONFIG_HIGHMEM=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
......
......@@ -70,7 +70,7 @@ CONFIG_TAU_AVERAGE=y
CONFIG_QUICC_ENGINE=y
CONFIG_QE_GPIO=y
CONFIG_PPC_BESTCOMM=y
CONFIG_MPC8xxx_GPIO=y
CONFIG_GPIO_MPC8XXX=y
CONFIG_MCU_MPC8349EMITX=m
CONFIG_HIGHMEM=y
CONFIG_NO_HZ=y
......
......@@ -6,6 +6,7 @@ config PPC_MPC512x
select PPC_CLOCK
select PPC_PCI_CHOICE
select FSL_PCI if PCI
select ARCH_WANT_OPTIONAL_GPIOLIB
config MPC5121_ADS
bool "Freescale MPC5121E ADS"
......
......@@ -114,18 +114,21 @@ config KMETER1
endif
# used for usb
# used for usb & gpio
config PPC_MPC831x
bool
select ARCH_WANT_OPTIONAL_GPIOLIB
# used for math-emu
config PPC_MPC832x
bool
# used for usb
# used for usb & gpio
config PPC_MPC834x
bool
select ARCH_WANT_OPTIONAL_GPIOLIB
# used for usb
# used for usb & gpio
config PPC_MPC837x
bool
select ARCH_WANT_OPTIONAL_GPIOLIB
......@@ -177,7 +177,8 @@ config P2040_RDB
select PPC_E500MC
select PHYS_64BIT
select SWIOTLB
select MPC8xxx_GPIO
select ARCH_REQUIRE_GPIOLIB
select GPIO_MPC8XXX
select HAS_RAPIDIO
select PPC_EPAPR_HV_PIC
help
......@@ -189,7 +190,8 @@ config P3041_DS
select PPC_E500MC
select PHYS_64BIT
select SWIOTLB
select MPC8xxx_GPIO
select ARCH_REQUIRE_GPIOLIB
select GPIO_MPC8XXX
select HAS_RAPIDIO
select PPC_EPAPR_HV_PIC
help
......@@ -201,7 +203,8 @@ config P4080_DS
select PPC_E500MC
select PHYS_64BIT
select SWIOTLB
select MPC8xxx_GPIO
select ARCH_REQUIRE_GPIOLIB
select GPIO_MPC8XXX
select HAS_RAPIDIO
select PPC_EPAPR_HV_PIC
help
......@@ -216,7 +219,8 @@ config P5020_DS
select PPC_E500MC
select PHYS_64BIT
select SWIOTLB
select MPC8xxx_GPIO
select ARCH_REQUIRE_GPIOLIB
select GPIO_MPC8XXX
select HAS_RAPIDIO
select PPC_EPAPR_HV_PIC
help
......
......@@ -4,6 +4,7 @@ menuconfig PPC_86xx
depends on 6xx
select FSL_SOC
select ALTIVEC
select ARCH_WANT_OPTIONAL_GPIOLIB
help
The Freescale E600 SoCs have 74xx cores.
......
......@@ -334,16 +334,6 @@ config OF_RTC
source "arch/powerpc/sysdev/bestcomm/Kconfig"
config MPC8xxx_GPIO
bool "MPC512x/MPC8xxx GPIO support"
depends on PPC_MPC512x || PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || \
FSL_SOC_BOOKE || PPC_86xx
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
help
Say Y here if you're going to use hardware that connects to the
MPC512x/831x/834x/837x/8572/8610 GPIOs.
config SIMPLE_GPIO
bool "Support for simple, memory-mapped GPIO controllers"
depends on PPC
......
......@@ -18,7 +18,6 @@ obj-$(CONFIG_FSL_PCI) += fsl_pci.o $(fsl-msi-obj-y)
obj-$(CONFIG_FSL_PMC) += fsl_pmc.o
obj-$(CONFIG_FSL_LBC) += fsl_lbc.o
obj-$(CONFIG_FSL_GTM) += fsl_gtm.o
obj-$(CONFIG_MPC8xxx_GPIO) += mpc8xxx_gpio.o
obj-$(CONFIG_FSL_85XX_CACHE_SRAM) += fsl_85xx_l2ctlr.o fsl_85xx_cache_sram.o
obj-$(CONFIG_SIMPLE_GPIO) += simple_gpio.o
obj-$(CONFIG_FSL_RIO) += fsl_rio.o
......
......@@ -103,6 +103,14 @@ config GPIO_MPC5200
def_bool y
depends on PPC_MPC52xx
config GPIO_MPC8XXX
bool "MPC512x/MPC8xxx GPIO support"
depends on PPC_MPC512x || PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || \
FSL_SOC_BOOKE || PPC_86xx
help
Say Y here if you're going to use hardware that connects to the
MPC512x/831x/834x/837x/8572/8610 GPIOs.
config GPIO_MSM_V1
tristate "Qualcomm MSM GPIO v1"
depends on GPIOLIB && ARCH_MSM
......
......@@ -27,6 +27,7 @@ obj-$(CONFIG_GPIO_MC33880) += gpio-mc33880.o
obj-$(CONFIG_GPIO_MCP23S08) += gpio-mcp23s08.o
obj-$(CONFIG_GPIO_ML_IOH) += gpio-ml-ioh.o
obj-$(CONFIG_GPIO_MPC5200) += gpio-mpc5200.o
obj-$(CONFIG_GPIO_MPC8XXX) += gpio-mpc8xxx.o
obj-$(CONFIG_GPIO_MSM_V1) += gpio-msm-v1.o
obj-$(CONFIG_GPIO_MSM_V2) += gpio-msm-v2.o
obj-$(CONFIG_GPIO_MXC) += gpio-mxc.o
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment