platform/mellanox: mlxreg-hotplug: Modify to use a regmap interface

Restructure mlxreg header for unification of hotplug item definitions.

Unify hotplug items to allow any kind of item (power controller, fan
eeprom, psu eeprom, asic health) in common way.

Use a hardware independent regmap interface, enabling the support of
hotplug events over programmable devices attached to different bus
types, such as I2C, LPC, or SPI. Add a device node to the
mlxreg_core_data structure.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
[dvhart: spelling corrections, refactor device node introduction]
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

drivers/platform/mellanox/Kconfig

@@ -16,6 +16,7 @@ if MELLANOX_PLATFORM
 
 config MLXREG_HOTPLUG
 	tristate "Mellanox platform hotplug driver support"
+	depends on REGMAP
 	depends on HWMON
 	depends on I2C
 	---help---

drivers/platform/mellanox/mlxreg-hotplug.c

@@ -37,99 +37,97 @@
 #include <linux/hwmon-sysfs.h>
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
-#include <linux/io.h>
 #include <linux/module.h>
+#include <linux/of_device.h>
 #include <linux/platform_data/mlxreg.h>
 #include <linux/platform_device.h>
 #include <linux/spinlock.h>
+#include <linux/regmap.h>
 #include <linux/workqueue.h>
 
-/* Offset of event and mask registers from status register */
+/* Offset of event and mask registers from status register. */
 #define MLXREG_HOTPLUG_EVENT_OFF	1
 #define MLXREG_HOTPLUG_MASK_OFF		2
 #define MLXREG_HOTPLUG_AGGR_MASK_OFF	1
 
-#define MLXREG_HOTPLUG_ATTRS_NUM	8
+/* ASIC health parameters. */
+#define MLXREG_HOTPLUG_HEALTH_MASK	0x02
+#define MLXREG_HOTPLUG_RST_CNTR		3
 
-/**
- * enum mlxreg_hotplug_attr_type - sysfs attributes for hotplug events:
- * @MLXREG_HOTPLUG_ATTR_TYPE_PSU: power supply unit attribute;
- * @MLXREG_HOTPLUG_ATTR_TYPE_PWR: power cable attribute;
- * @MLXREG_HOTPLUG_ATTR_TYPE_FAN: FAN drawer attribute;
- */
-enum mlxreg_hotplug_attr_type {
-	MLXREG_HOTPLUG_ATTR_TYPE_PSU,
-	MLXREG_HOTPLUG_ATTR_TYPE_PWR,
-	MLXREG_HOTPLUG_ATTR_TYPE_FAN,
-};
+#define MLXREG_HOTPLUG_ATTRS_MAX	24
 
 /**
  * struct mlxreg_hotplug_priv_data - platform private data:
- * @irq: platform interrupt number;
+ * @irq: platform device interrupt number;
  * @pdev: platform device;
  * @plat: platform data;
+ * @dwork: delayed work template;
+ * @lock: spin lock;
  * @hwmon: hwmon device;
  * @mlxreg_hotplug_attr: sysfs attributes array;
  * @mlxreg_hotplug_dev_attr: sysfs sensor device attribute array;
  * @group: sysfs attribute group;
  * @groups: list of sysfs attribute group for hwmon registration;
- * @dwork: delayed work template;
- * @lock: spin lock;
+ * @cell: location of top aggregation interrupt register;
+ * @mask: top aggregation interrupt common mask;
  * @aggr_cache: last value of aggregation register status;
- * @psu_cache: last value of PSU register status;
- * @pwr_cache: last value of power register status;
- * @fan_cache: last value of FAN register status;
  */
 struct mlxreg_hotplug_priv_data {
 	int irq;
+	struct device *dev;
 	struct platform_device *pdev;
 	struct mlxreg_hotplug_platform_data *plat;
+	struct regmap *regmap;
+	struct delayed_work dwork_irq;
+	struct delayed_work dwork;
+	spinlock_t lock; /* sync with interrupt */
 	struct device *hwmon;
-	struct attribute *mlxreg_hotplug_attr[MLXREG_HOTPLUG_ATTRS_NUM + 1];
+	struct attribute *mlxreg_hotplug_attr[MLXREG_HOTPLUG_ATTRS_MAX + 1];
 	struct sensor_device_attribute_2
-			mlxreg_hotplug_dev_attr[MLXREG_HOTPLUG_ATTRS_NUM];
+			mlxreg_hotplug_dev_attr[MLXREG_HOTPLUG_ATTRS_MAX];
 	struct attribute_group group;
 	const struct attribute_group *groups[2];
-	struct delayed_work dwork;
-	spinlock_t lock;
-	u8 aggr_cache;
-	u8 psu_cache;
-	u8 pwr_cache;
-	u8 fan_cache;
+	u32 cell;
+	u32 mask;
+	u32 aggr_cache;
+	bool after_probe;
 };
 
 static int mlxreg_hotplug_device_create(struct device *dev,
-					struct mlxreg_hotplug_device *item)
+					struct mlxreg_core_data *data)
 {
-	item->adapter = i2c_get_adapter(item->nr);
-	if (!item->adapter) {
+	data->hpdev.adapter = i2c_get_adapter(data->hpdev.nr);
+	if (!data->hpdev.adapter) {
 		dev_err(dev, "Failed to get adapter for bus %d\n",
-			item->nr);
+			data->hpdev.nr);
 		return -EFAULT;
 	}
 
-	item->client = i2c_new_device(item->adapter, &item->brdinfo);
-	if (!item->client) {
+	data->hpdev.client = i2c_new_device(data->hpdev.adapter,
+					    data->hpdev.brdinfo);
+	if (!data->hpdev.client) {
 		dev_err(dev, "Failed to create client %s at bus %d at addr 0x%02x\n",
-			item->brdinfo.type, item->nr, item->brdinfo.addr);
-		i2c_put_adapter(item->adapter);
-		item->adapter = NULL;
+			data->hpdev.brdinfo->type, data->hpdev.nr,
+			data->hpdev.brdinfo->addr);
+
+		i2c_put_adapter(data->hpdev.adapter);
+		data->hpdev.adapter = NULL;
 		return -EFAULT;
 	}
 
 	return 0;
 }
 
-static void mlxreg_hotplug_device_destroy(struct mlxreg_hotplug_device *item)
+static void mlxreg_hotplug_device_destroy(struct mlxreg_core_data *data)
 {
-	if (item->client) {
-		i2c_unregister_device(item->client);
-		item->client = NULL;
+	if (data->hpdev.client) {
+		i2c_unregister_device(data->hpdev.client);
+		data->hpdev.client = NULL;
 	}
 
-	if (item->adapter) {
-		i2c_put_adapter(item->adapter);
-		item->adapter = NULL;
+	if (data->hpdev.adapter) {
+		i2c_put_adapter(data->hpdev.adapter);
+		data->hpdev.adapter = NULL;
 	}
 }
 
@@ -137,41 +135,76 @@ static ssize_t mlxreg_hotplug_attr_show(struct device *dev,
 					struct device_attribute *attr,
 					char *buf)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct mlxreg_hotplug_priv_data *priv = platform_get_drvdata(pdev);
+	struct mlxreg_hotplug_priv_data *priv = dev_get_drvdata(dev);
+	struct mlxreg_core_hotplug_platform_data *pdata;
 	int index = to_sensor_dev_attr_2(attr)->index;
 	int nr = to_sensor_dev_attr_2(attr)->nr;
-	u8 reg_val = 0;
-
-	switch (nr) {
-	case MLXREG_HOTPLUG_ATTR_TYPE_PSU:
-		/* Bit = 0 : PSU is present. */
-		reg_val = !!!(inb(priv->plat->psu_reg_offset) & BIT(index));
-		break;
-
-	case MLXREG_HOTPLUG_ATTR_TYPE_PWR:
-		/* Bit = 1 : power cable is attached. */
-		reg_val = !!(inb(priv->plat->pwr_reg_offset) & BIT(index %
-						priv->plat->pwr_count));
-		break;
-
-	case MLXREG_HOTPLUG_ATTR_TYPE_FAN:
-		/* Bit = 0 : FAN is present. */
-		reg_val = !!!(inb(priv->plat->fan_reg_offset) & BIT(index %
-						priv->plat->fan_count));
-		break;
+	struct mlxreg_core_item *item;
+	struct mlxreg_core_data *data;
+	u32 regval;
+	int ret;
+
+	pdata = dev_get_platdata(&priv->pdev->dev);
+	item = pdata->items + nr;
+	data = item->data + index;
+
+	ret = regmap_read(priv->regmap, data->reg, &regval);
+	if (ret)
+		return ret;
+
+	if (item->health) {
+		regval &= data->mask;
+	} else {
+		/* Bit = 0 : functional if item->inversed is true. */
+		if (item->inversed)
+			regval = !(regval & data->mask);
+		else
+			regval = !!(regval & data->mask);
 	}
 
-	return sprintf(buf, "%u\n", reg_val);
+	return sprintf(buf, "%u\n", regval);
 }
 
 #define PRIV_ATTR(i) priv->mlxreg_hotplug_attr[i]
 #define PRIV_DEV_ATTR(i) priv->mlxreg_hotplug_dev_attr[i]
+
 static int mlxreg_hotplug_attr_init(struct mlxreg_hotplug_priv_data *priv)
 {
-	int num_attrs = priv->plat->psu_count + priv->plat->pwr_count +
-			priv->plat->fan_count;
-	int i;
+	struct mlxreg_core_hotplug_platform_data *pdata;
+	struct mlxreg_core_item *item;
+	struct mlxreg_core_data *data;
+	int num_attrs = 0, id = 0, i, j;
+
+	pdata = dev_get_platdata(&priv->pdev->dev);
+	item = pdata->items;
+
+	/* Go over all kinds of items - psu, pwr, fan. */
+	for (i = 0; i < pdata->counter; i++, item++) {
+		num_attrs += item->count;
+		data = item->data;
+		/* Go over all units within the item. */
+		for (j = 0; j < item->count; j++, data++, id++) {
+			PRIV_ATTR(id) = &PRIV_DEV_ATTR(id).dev_attr.attr;
+			PRIV_ATTR(id)->name = devm_kasprintf(&priv->pdev->dev,
+							     GFP_KERNEL,
+							     data->label);
+
+			if (!PRIV_ATTR(id)->name) {
+				dev_err(priv->dev, "Memory allocation failed for attr %d.\n",
+					id);
+				return -ENOMEM;
+			}
+
+			PRIV_DEV_ATTR(id).dev_attr.attr.name =
+							PRIV_ATTR(id)->name;
+			PRIV_DEV_ATTR(id).dev_attr.attr.mode = 0444;
+			PRIV_DEV_ATTR(id).dev_attr.show =
+						mlxreg_hotplug_attr_show;
+			PRIV_DEV_ATTR(id).nr = i;
+			PRIV_DEV_ATTR(id).index = j;
+			sysfs_attr_init(&PRIV_DEV_ATTR(id).dev_attr.attr);
+		}
+	}
 
 	priv->group.attrs = devm_kzalloc(&priv->pdev->dev, num_attrs *
 					 sizeof(struct attribute *),
@@ -179,38 +212,6 @@ static int mlxreg_hotplug_attr_init(struct mlxreg_hotplug_priv_data *priv)
 	if (!priv->group.attrs)
 		return -ENOMEM;
 
-	for (i = 0; i < num_attrs; i++) {
-		PRIV_ATTR(i) = &PRIV_DEV_ATTR(i).dev_attr.attr;
-
-		if (i < priv->plat->psu_count) {
-			PRIV_ATTR(i)->name = devm_kasprintf(&priv->pdev->dev,
-						GFP_KERNEL, "psu%u", i + 1);
-			PRIV_DEV_ATTR(i).nr = MLXREG_HOTPLUG_ATTR_TYPE_PSU;
-		} else if (i < priv->plat->psu_count + priv->plat->pwr_count) {
-			PRIV_ATTR(i)->name = devm_kasprintf(&priv->pdev->dev,
-						GFP_KERNEL, "pwr%u", i %
-						priv->plat->pwr_count + 1);
-			PRIV_DEV_ATTR(i).nr = MLXREG_HOTPLUG_ATTR_TYPE_PWR;
-		} else {
-			PRIV_ATTR(i)->name = devm_kasprintf(&priv->pdev->dev,
-						GFP_KERNEL, "fan%u", i %
-						priv->plat->fan_count + 1);
-			PRIV_DEV_ATTR(i).nr = MLXREG_HOTPLUG_ATTR_TYPE_FAN;
-		}
-
-		if (!PRIV_ATTR(i)->name) {
-			dev_err(&priv->pdev->dev, "Memory allocation failed for sysfs attribute %d.\n",
-				i + 1);
-			return -ENOMEM;
-		}
-
-		PRIV_DEV_ATTR(i).dev_attr.attr.name = PRIV_ATTR(i)->name;
-		PRIV_DEV_ATTR(i).dev_attr.attr.mode = S_IRUGO;
-		PRIV_DEV_ATTR(i).dev_attr.show = mlxreg_hotplug_attr_show;
-		PRIV_DEV_ATTR(i).index = i;
-		sysfs_attr_init(&PRIV_DEV_ATTR(i).dev_attr.attr);
-	}
-
 	priv->group.attrs = priv->mlxreg_hotplug_attr;
 	priv->groups[0] = &priv->group;
 	priv->groups[1] = NULL;
@@ -218,20 +219,13 @@ static int mlxreg_hotplug_attr_init(struct mlxreg_hotplug_priv_data *priv)
 	return 0;
 }
 
-static inline void
-mlxreg_hotplug_work_helper(struct device *dev,
-			   struct mlxreg_hotplug_device *item, u8 is_inverse,
-			   u16 offset, u8 mask, u8 *cache)
+static void
+mlxreg_hotplug_work_helper(struct mlxreg_hotplug_priv_data *priv,
+			   struct mlxreg_core_item *item)
 {
-	u8 val, asserted;
-	int bit;
-
-	/* Mask event. */
-	outb(0, offset + MLXREG_HOTPLUG_MASK_OFF);
-	/* Read status. */
-	val = inb(offset) & mask;
-	asserted = *cache ^ val;
-	*cache = val;
+	struct mlxreg_core_data *data;
+	u32 asserted, regval, bit;
+	int ret;
 
 	/*
 	 * Validate if item related to received signal type is valid.
@@ -241,86 +235,177 @@ mlxreg_hotplug_work_helper(struct device *dev,
 	 * signals from other devices if any.
 	 */
 	if (unlikely(!item)) {
-		dev_err(dev, "False signal is received: register at offset 0x%02x, mask 0x%02x.\n",
-			offset, mask);
+		dev_err(priv->dev, "False signal: at offset:mask 0x%02x:0x%02x.\n",
+			item->reg, item->mask);
+
 		return;
 	}
 
+	/* Mask event. */
+	ret = regmap_write(priv->regmap, item->reg + MLXREG_HOTPLUG_MASK_OFF,
+			   0);
+	if (ret)
+		goto out;
+
+	/* Read status. */
+	ret = regmap_read(priv->regmap, item->reg, &regval);
+	if (ret)
+		goto out;
+
+	/* Set asserted bits and save last status. */
+	regval &= item->mask;
+	asserted = item->cache ^ regval;
+	item->cache = regval;
+
 	for_each_set_bit(bit, (unsigned long *)&asserted, 8) {
-		if (val & BIT(bit)) {
-			if (is_inverse)
-				mlxreg_hotplug_device_destroy(item + bit);
+		data = item->data + bit;
+		if (regval & BIT(bit)) {
+			if (item->inversed)
+				mlxreg_hotplug_device_destroy(data);
 			else
-				mlxreg_hotplug_device_create(dev, item + bit);
+				mlxreg_hotplug_device_create(priv->dev, data);
 		} else {
-			if (is_inverse)
-				mlxreg_hotplug_device_create(dev, item + bit);
+			if (item->inversed)
+				mlxreg_hotplug_device_create(priv->dev, data);
 			else
-				mlxreg_hotplug_device_destroy(item + bit);
+				mlxreg_hotplug_device_destroy(data);
 		}
 	}
 
 	/* Acknowledge event. */
-	outb(0, offset + MLXREG_HOTPLUG_EVENT_OFF);
+	ret = regmap_write(priv->regmap, item->reg + MLXREG_HOTPLUG_EVENT_OFF,
+			   0);
+	if (ret)
+		goto out;
+
 	/* Unmask event. */
-	outb(mask, offset + MLXREG_HOTPLUG_MASK_OFF);
+	ret = regmap_write(priv->regmap, item->reg + MLXREG_HOTPLUG_MASK_OFF,
+			   item->mask);
+
+ out:
+	if (ret)
+		dev_err(priv->dev, "Failed to complete workqueue.\n");
+}
+
+static void
+mlxreg_hotplug_health_work_helper(struct mlxreg_hotplug_priv_data *priv,
+				  struct mlxreg_core_item *item)
+{
+	struct mlxreg_core_data *data = item->data;
+	u32 regval;
+	int i, ret;
+
+	for (i = 0; i < item->count; i++, data++) {
+		/* Mask event. */
+		ret = regmap_write(priv->regmap, data->reg +
+				   MLXREG_HOTPLUG_MASK_OFF, 0);
+		if (ret)
+			goto out;
+
+		/* Read status. */
+		ret = regmap_read(priv->regmap, data->reg, &regval);
+		if (ret)
+			goto out;
+
+		regval &= data->mask;
+		item->cache = regval;
+		if (regval == MLXREG_HOTPLUG_HEALTH_MASK) {
+			if ((data->health_cntr++ == MLXREG_HOTPLUG_RST_CNTR) ||
+			    !priv->after_probe) {
+				mlxreg_hotplug_device_create(priv->dev, data);
+				data->attached = true;
+			}
+		} else {
+			if (data->attached) {
+				mlxreg_hotplug_device_destroy(data);
+				data->attached = false;
+				data->health_cntr = 0;
+			}
+		}
+
+		/* Acknowledge event. */
+		ret = regmap_write(priv->regmap, data->reg +
+				   MLXREG_HOTPLUG_EVENT_OFF, 0);
+		if (ret)
+			goto out;
+
+		/* Unmask event. */
+		ret = regmap_write(priv->regmap, data->reg +
+				   MLXREG_HOTPLUG_MASK_OFF, data->mask);
+		if (ret)
+			goto out;
+	}
+
+ out:
+	if (ret)
+		dev_err(priv->dev, "Failed to complete workqueue.\n");
 }
 
 /*
- * mlxreg_hotplug_work_handler - performs traversing of CPLD interrupt
+ * mlxreg_hotplug_work_handler - performs traversing of device interrupt
  * registers according to the below hierarchy schema:
  *
  *				Aggregation registers (status/mask)
  * PSU registers:		*---*
  * *-----------------*		|   |
- * |status/event/mask|----->| * |
+ * |status/event/mask|----->    | * |
  * *-----------------*		|   |
  * Power registers:		|   |
  * *-----------------*		|   |
- * |status/event/mask|----->| * |---> CPU
+ * |status/event/mask|----->    | * |
  * *-----------------*		|   |
- * FAN registers:
+ * FAN registers:		|   |--> CPU
  * *-----------------*		|   |
- * |status/event/mask|----->| * |
+ * |status/event/mask|----->    | * |
+ * *-----------------*		|   |
+ * ASIC registers:		|   |
+ * *-----------------*		|   |
+ * |status/event/mask|----->    | * |
  * *-----------------*		|   |
  *				*---*
+ *
  * In case some system changed are detected: FAN in/out, PSU in/out, power
- * cable attached/detached, relevant device is created or destroyed.
+ * cable attached/detached, ASIC health good/bad, relevant device is created
+ * or destroyed.
  */
 static void mlxreg_hotplug_work_handler(struct work_struct *work)
 {
-	struct mlxreg_hotplug_priv_data *priv = container_of(work,
-				struct mlxreg_hotplug_priv_data, dwork.work);
-	u8 val, aggr_asserted;
+	struct mlxreg_core_hotplug_platform_data *pdata;
+	struct mlxreg_hotplug_priv_data *priv;
+	struct mlxreg_core_item *item;
+	u32 regval, aggr_asserted;
 	unsigned long flags;
+	int i, ret;
+
+	priv = container_of(work, struct mlxreg_hotplug_priv_data,
+			    dwork_irq.work);
+	pdata = dev_get_platdata(&priv->pdev->dev);
+	item = pdata->items;
 
 	/* Mask aggregation event. */
-	outb(0, priv->plat->top_aggr_offset + MLXREG_HOTPLUG_AGGR_MASK_OFF);
+	ret = regmap_write(priv->regmap, pdata->cell +
+			   MLXREG_HOTPLUG_AGGR_MASK_OFF, 0);
+	if (ret < 0)
+		goto out;
+
 	/* Read aggregation status. */
-	val = inb(priv->plat->top_aggr_offset) & priv->plat->top_aggr_mask;
-	aggr_asserted = priv->aggr_cache ^ val;
-	priv->aggr_cache = val;
-
-	/* Handle PSU configuration changes. */
-	if (aggr_asserted & priv->plat->top_aggr_psu_mask)
-		mlxreg_hotplug_work_helper(&priv->pdev->dev, priv->plat->psu,
-					   1, priv->plat->psu_reg_offset,
-					   priv->plat->psu_mask,
-					   &priv->psu_cache);
-
-	/* Handle power cable configuration changes. */
-	if (aggr_asserted & priv->plat->top_aggr_pwr_mask)
-		mlxreg_hotplug_work_helper(&priv->pdev->dev, priv->plat->pwr,
-					   0, priv->plat->pwr_reg_offset,
-					   priv->plat->pwr_mask,
-					   &priv->pwr_cache);
-
-	/* Handle FAN configuration changes. */
-	if (aggr_asserted & priv->plat->top_aggr_fan_mask)
-		mlxreg_hotplug_work_helper(&priv->pdev->dev, priv->plat->fan,
-					   1, priv->plat->fan_reg_offset,
-					   priv->plat->fan_mask,
-					   &priv->fan_cache);
+	ret = regmap_read(priv->regmap, pdata->cell, &regval);
+	if (ret)
+		goto out;
+
+	regval &= pdata->mask;
+	aggr_asserted = priv->aggr_cache ^ regval;
+	priv->aggr_cache = regval;
+
+	/* Handle topology and health configuration changes. */
+	for (i = 0; i < pdata->counter; i++, item++) {
+		if (aggr_asserted & item->aggr_mask) {
+			if (item->health)
+				mlxreg_hotplug_health_work_helper(priv, item);
+			else
+				mlxreg_hotplug_work_helper(priv, item);
+		}
+	}
 
 	if (aggr_asserted) {
 		spin_lock_irqsave(&priv->lock, flags);
@@ -335,8 +420,8 @@ static void mlxreg_hotplug_work_handler(struct work_struct *work)
 		 * validates that no new signals have been received during
 		 * masking.
 		 */
-		cancel_delayed_work(&priv->dwork);
-		schedule_delayed_work(&priv->dwork, 0);
+		cancel_delayed_work(&priv->dwork_irq);
+		schedule_delayed_work(&priv->dwork_irq, 0);
 
 		spin_unlock_irqrestore(&priv->lock, flags);
 
@@ -344,92 +429,119 @@ static void mlxreg_hotplug_work_handler(struct work_struct *work)
 	}
 
 	/* Unmask aggregation event (no need acknowledge). */
-	outb(priv->plat->top_aggr_mask, priv->plat->top_aggr_offset +
-						MLXREG_HOTPLUG_AGGR_MASK_OFF);
+	ret = regmap_write(priv->regmap, pdata->cell +
+			   MLXREG_HOTPLUG_AGGR_MASK_OFF, pdata->mask);
+
+ out:
+	if (ret)
+		dev_err(priv->dev, "Failed to complete workqueue.\n");
 }
 
-static void mlxreg_hotplug_set_irq(struct mlxreg_hotplug_priv_data *priv)
+static int mlxreg_hotplug_set_irq(struct mlxreg_hotplug_priv_data *priv)
 {
-	/* Clear psu presense event. */
-	outb(0, priv->plat->psu_reg_offset + MLXREG_HOTPLUG_EVENT_OFF);
-	/* Set psu initial status as mask and unmask psu event. */
-	priv->psu_cache = priv->plat->psu_mask;
-	outb(priv->plat->psu_mask, priv->plat->psu_reg_offset +
-						MLXREG_HOTPLUG_MASK_OFF);
-
-	/* Clear power cable event. */
-	outb(0, priv->plat->pwr_reg_offset + MLXREG_HOTPLUG_EVENT_OFF);
-	/* Keep power initial status as zero and unmask power event. */
-	outb(priv->plat->pwr_mask, priv->plat->pwr_reg_offset +
-						MLXREG_HOTPLUG_MASK_OFF);
-
-	/* Clear fan presense event. */
-	outb(0, priv->plat->fan_reg_offset + MLXREG_HOTPLUG_EVENT_OFF);
-	/* Set fan initial status as mask and unmask fan event. */
-	priv->fan_cache = priv->plat->fan_mask;
-	outb(priv->plat->fan_mask, priv->plat->fan_reg_offset +
-						MLXREG_HOTPLUG_MASK_OFF);
+	struct mlxreg_core_hotplug_platform_data *pdata;
+	struct mlxreg_core_item *item;
+	int i, ret;
+
+	pdata = dev_get_platdata(&priv->pdev->dev);
+	item = pdata->items;
+
+	for (i = 0; i < pdata->counter; i++, item++) {
+		/* Clear group presense event. */
+		ret = regmap_write(priv->regmap, item->reg +
+				   MLXREG_HOTPLUG_EVENT_OFF, 0);
+		if (ret)
+			goto out;
+
+		/* Set group initial status as mask and unmask group event. */
+		if (item->inversed) {
+			item->cache = item->mask;
+			ret = regmap_write(priv->regmap, item->reg +
+					   MLXREG_HOTPLUG_MASK_OFF,
+					   item->mask);
+			if (ret)
+				goto out;
+		}
+	}
 
 	/* Keep aggregation initial status as zero and unmask events. */
-	outb(priv->plat->top_aggr_mask, priv->plat->top_aggr_offset +
-						MLXREG_HOTPLUG_AGGR_MASK_OFF);
+	ret = regmap_write(priv->regmap, pdata->cell +
+			   MLXREG_HOTPLUG_AGGR_MASK_OFF, pdata->mask);
+	if (ret)
+		goto out;
+
+	/* Keep low aggregation initial status as zero and unmask events. */
+	if (pdata->cell_low) {
+		ret = regmap_write(priv->regmap, pdata->cell_low +
+				   MLXREG_HOTPLUG_AGGR_MASK_OFF,
+				   pdata->mask_low);
+		if (ret)
+			goto out;
+	}
 
 	/* Invoke work handler for initializing hot plug devices setting. */
-	mlxreg_hotplug_work_handler(&priv->dwork.work);
+	mlxreg_hotplug_work_handler(&priv->dwork_irq.work);
 
+ out:
+	if (ret)
+		dev_err(priv->dev, "Failed to set interrupts.\n");
 	enable_irq(priv->irq);
+	return ret;
 }
 
 static void mlxreg_hotplug_unset_irq(struct mlxreg_hotplug_priv_data *priv)
 {
-	int i;
+	struct mlxreg_core_hotplug_platform_data *pdata;
+	struct mlxreg_core_item *item;
+	struct mlxreg_core_data *data;
+	int count, i, j;
 
+	pdata = dev_get_platdata(&priv->pdev->dev);
+	item = pdata->items;
 	disable_irq(priv->irq);
-	cancel_delayed_work_sync(&priv->dwork);
-
-	/* Mask aggregation event. */
-	outb(0, priv->plat->top_aggr_offset + MLXREG_HOTPLUG_AGGR_MASK_OFF);
+	cancel_delayed_work_sync(&priv->dwork_irq);
 
-	/* Mask psu presense event. */
-	outb(0, priv->plat->psu_reg_offset + MLXREG_HOTPLUG_MASK_OFF);
-	/* Clear psu presense event. */
-	outb(0, priv->plat->psu_reg_offset + MLXREG_HOTPLUG_EVENT_OFF);
+	/* Mask low aggregation event, if defined. */
+	if (pdata->cell_low)
+		regmap_write(priv->regmap, pdata->cell_low +
+			     MLXREG_HOTPLUG_AGGR_MASK_OFF, 0);
 
-	/* Mask power cable event. */
-	outb(0, priv->plat->pwr_reg_offset + MLXREG_HOTPLUG_MASK_OFF);
-	/* Clear power cable event. */
-	outb(0, priv->plat->pwr_reg_offset + MLXREG_HOTPLUG_EVENT_OFF);
-
-	/* Mask fan presense event. */
-	outb(0, priv->plat->fan_reg_offset + MLXREG_HOTPLUG_MASK_OFF);
-	/* Clear fan presense event. */
-	outb(0, priv->plat->fan_reg_offset + MLXREG_HOTPLUG_EVENT_OFF);
-
-	/* Remove all the attached devices. */
-	for (i = 0; i < priv->plat->psu_count; i++)
-		mlxreg_hotplug_device_destroy(priv->plat->psu + i);
-
-	for (i = 0; i < priv->plat->pwr_count; i++)
-		mlxreg_hotplug_device_destroy(priv->plat->pwr + i);
-
-	for (i = 0; i < priv->plat->fan_count; i++)
-		mlxreg_hotplug_device_destroy(priv->plat->fan + i);
+	/* Mask aggregation event. */
+	regmap_write(priv->regmap, pdata->cell + MLXREG_HOTPLUG_AGGR_MASK_OFF,
+		     0);
+
+	/* Clear topology configurations. */
+	for (i = 0; i < pdata->counter; i++, item++) {
+		data = item->data;
+		/* Mask group presense event. */
+		regmap_write(priv->regmap, data->reg + MLXREG_HOTPLUG_MASK_OFF,
+			     0);
+		/* Clear group presense event. */
+		regmap_write(priv->regmap, data->reg +
+			     MLXREG_HOTPLUG_EVENT_OFF, 0);
+
+		/* Remove all the attached devices in group. */
+		count = item->count;
+		for (j = 0; j < count; j++, data++)
+			mlxreg_hotplug_device_destroy(data);
+	}
 }
 
 static irqreturn_t mlxreg_hotplug_irq_handler(int irq, void *dev)
 {
-	struct mlxreg_hotplug_priv_data *priv =
-				(struct mlxreg_hotplug_priv_data *)dev;
+	struct mlxreg_hotplug_priv_data *priv;
+
+	priv = (struct mlxreg_hotplug_priv_data *)dev;
 
 	/* Schedule work task for immediate execution.*/
-	schedule_delayed_work(&priv->dwork, 0);
+	schedule_delayed_work(&priv->dwork_irq, 0);
 
 	return IRQ_HANDLED;
 }
 
 static int mlxreg_hotplug_probe(struct platform_device *pdev)
 {
-	struct mlxreg_hotplug_platform_data *pdata;
+	struct mlxreg_core_hotplug_platform_data *pdata;
 	struct mlxreg_hotplug_priv_data *priv;
 	int err;
 
@@ -443,31 +555,42 @@ static int mlxreg_hotplug_probe(struct platform_device *pdev)
 	if (!priv)
 		return -ENOMEM;
 
-	priv->pdev = pdev;
-	priv->plat = pdata;
-
+	if (pdata->irq) {
+		priv->irq = pdata->irq;
+	} else {
 		priv->irq = platform_get_irq(pdev, 0);
 		if (priv->irq < 0) {
 			dev_err(&pdev->dev, "Failed to get platform irq: %d\n",
 				priv->irq);
 			return priv->irq;
 		}
+	}
+
+	priv->regmap = pdata->regmap;
+	priv->dev = pdev->dev.parent;
+	priv->pdev = pdev;
 
 	err = devm_request_irq(&pdev->dev, priv->irq,
-			       mlxreg_hotplug_irq_handler, 0, pdev->name,
-			       priv);
+			       mlxreg_hotplug_irq_handler, IRQF_TRIGGER_FALLING
+			       | IRQF_SHARED, "mlxreg-hotplug", priv);
 	if (err) {
 		dev_err(&pdev->dev, "Failed to request irq: %d\n", err);
 		return err;
 	}
-	disable_irq(priv->irq);
 
-	INIT_DELAYED_WORK(&priv->dwork, mlxreg_hotplug_work_handler);
+	disable_irq(priv->irq);
 	spin_lock_init(&priv->lock);
+	INIT_DELAYED_WORK(&priv->dwork_irq, mlxreg_hotplug_work_handler);
+	/* Perform initial interrupts setup. */
+	mlxreg_hotplug_set_irq(priv);
+
+	priv->after_probe = true;
+	dev_set_drvdata(&pdev->dev, priv);
 
 	err = mlxreg_hotplug_attr_init(priv);
 	if (err) {
-		dev_err(&pdev->dev, "Failed to allocate attributes: %d\n", err);
+		dev_err(&pdev->dev, "Failed to allocate attributes: %d\n",
+			err);
 		return err;
 	}
 
@@ -479,17 +602,12 @@ static int mlxreg_hotplug_probe(struct platform_device *pdev)
 		return PTR_ERR(priv->hwmon);
 	}
 
-	platform_set_drvdata(pdev, priv);
-
-	/* Perform initial interrupts setup. */
-	mlxreg_hotplug_set_irq(priv);
-
 	return 0;
 }
 
 static int mlxreg_hotplug_remove(struct platform_device *pdev)
 {
-	struct mlxreg_hotplug_priv_data *priv = platform_get_drvdata(pdev);
+	struct mlxreg_hotplug_priv_data *priv = dev_get_drvdata(&pdev->dev);
 
 	/* Clean interrupts setup. */
 	mlxreg_hotplug_unset_irq(priv);

drivers/platform/x86/mlx-platform.c

@@ -35,20 +35,22 @@
 #include <linux/dmi.h>
 #include <linux/i2c.h>
 #include <linux/i2c-mux.h>
+#include <linux/io.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/platform_data/i2c-mux-reg.h>
 #include <linux/platform_data/mlxreg.h>
+#include <linux/regmap.h>
 
 #define MLX_PLAT_DEVICE_NAME		"mlxplat"
 
 /* LPC bus IO offsets */
 #define MLXPLAT_CPLD_LPC_I2C_BASE_ADRR		0x2000
 #define MLXPLAT_CPLD_LPC_REG_BASE_ADRR		0x2500
-#define MLXPLAT_CPLD_LPC_REG_AGGR_ADRR		0x253a
-#define MLXPLAT_CPLD_LPC_REG_PSU_ADRR		0x2558
-#define MLXPLAT_CPLD_LPC_REG_PWR_ADRR		0x2564
-#define MLXPLAT_CPLD_LPC_REG_FAN_ADRR		0x2588
+#define MLXPLAT_CPLD_LPC_REG_AGGR_OFFSET	0x3a
+#define MLXPLAT_CPLD_LPC_REG_PSU_OFFSET		0x58
+#define MLXPLAT_CPLD_LPC_REG_PWR_OFFSET		0x64
+#define MLXPLAT_CPLD_LPC_REG_FAN_OFFSET		0x88
 #define MLXPLAT_CPLD_LPC_IO_RANGE		0x100
 #define MLXPLAT_CPLD_LPC_I2C_CH1_OFF		0xdb
 #define MLXPLAT_CPLD_LPC_I2C_CH2_OFF		0xda
@@ -138,78 +140,194 @@ static struct i2c_mux_reg_platform_data mlxplat_mux_data[] = {
 };
 
 /* Platform hotplug devices */
-static struct mlxreg_hotplug_device mlxplat_mlxcpld_psu[] = {
+static struct i2c_board_info mlxplat_mlxcpld_psu[] = {
 	{
-		.brdinfo = { I2C_BOARD_INFO("24c02", 0x51) },
-		.nr = 10,
+		I2C_BOARD_INFO("24c02", 0x51),
 	},
 	{
-		.brdinfo = { I2C_BOARD_INFO("24c02", 0x50) },
-		.nr = 10,
+		I2C_BOARD_INFO("24c02", 0x50),
 	},
 };
 
-static struct mlxreg_hotplug_device mlxplat_mlxcpld_pwr[] = {
+static struct i2c_board_info mlxplat_mlxcpld_pwr[] = {
 	{
-		.brdinfo = { I2C_BOARD_INFO("dps460", 0x59) },
-		.nr = 10,
+		I2C_BOARD_INFO("dps460", 0x59),
 	},
 	{
-		.brdinfo = { I2C_BOARD_INFO("dps460", 0x58) },
-		.nr = 10,
+		I2C_BOARD_INFO("dps460", 0x58),
 	},
 };
 
-static struct mlxreg_hotplug_device mlxplat_mlxcpld_fan[] = {
+static struct i2c_board_info mlxplat_mlxcpld_fan[] = {
 	{
-		.brdinfo = { I2C_BOARD_INFO("24c32", 0x50) },
-		.nr = 11,
+		I2C_BOARD_INFO("24c32", 0x50),
 	},
 	{
-		.brdinfo = { I2C_BOARD_INFO("24c32", 0x50) },
-		.nr = 12,
+		I2C_BOARD_INFO("24c32", 0x50),
 	},
 	{
-		.brdinfo = { I2C_BOARD_INFO("24c32", 0x50) },
-		.nr = 13,
+		I2C_BOARD_INFO("24c32", 0x50),
 	},
 	{
-		.brdinfo = { I2C_BOARD_INFO("24c32", 0x50) },
-		.nr = 14,
+		I2C_BOARD_INFO("24c32", 0x50),
 	},
 };
 
 /* Platform hotplug default data */
+static struct mlxreg_core_data mlxplat_mlxcpld_default_psu_items_data[] = {
+	{
+		.label = "psu1",
+		.reg = MLXPLAT_CPLD_LPC_REG_PSU_OFFSET,
+		.mask = BIT(0),
+		.hpdev.brdinfo = &mlxplat_mlxcpld_psu[0],
+		.hpdev.nr = 10,
+	},
+	{
+		.label = "psu2",
+		.reg = MLXPLAT_CPLD_LPC_REG_PSU_OFFSET,
+		.mask = BIT(1),
+		.hpdev.brdinfo = &mlxplat_mlxcpld_psu[1],
+		.hpdev.nr = 10,
+	},
+};
+
+static struct mlxreg_core_data mlxplat_mlxcpld_default_pwr_items_data[] = {
+	{
+		.label = "pwr1",
+		.reg = MLXPLAT_CPLD_LPC_REG_PWR_OFFSET,
+		.mask = BIT(0),
+		.hpdev.brdinfo = &mlxplat_mlxcpld_pwr[0],
+		.hpdev.nr = 10,
+	},
+	{
+		.label = "pwr2",
+		.reg = MLXPLAT_CPLD_LPC_REG_PWR_OFFSET,
+		.mask = BIT(1),
+		.hpdev.brdinfo = &mlxplat_mlxcpld_pwr[1],
+		.hpdev.nr = 10,
+	},
+};
+
+static struct mlxreg_core_data mlxplat_mlxcpld_default_fan_items_data[] = {
+	{
+		.label = "fan1",
+		.reg = MLXPLAT_CPLD_LPC_REG_FAN_OFFSET,
+		.mask = BIT(0),
+		.hpdev.brdinfo = &mlxplat_mlxcpld_fan[0],
+		.hpdev.nr = 11,
+	},
+	{
+		.label = "fan2",
+		.reg = MLXPLAT_CPLD_LPC_REG_FAN_OFFSET,
+		.mask = BIT(1),
+		.hpdev.brdinfo = &mlxplat_mlxcpld_fan[1],
+		.hpdev.nr = 12,
+	},
+	{
+		.label = "fan3",
+		.reg = MLXPLAT_CPLD_LPC_REG_FAN_OFFSET,
+		.mask = BIT(2),
+		.hpdev.brdinfo = &mlxplat_mlxcpld_fan[2],
+		.hpdev.nr = 13,
+	},
+	{
+		.label = "fan4",
+		.reg = MLXPLAT_CPLD_LPC_REG_FAN_OFFSET,
+		.mask = BIT(3),
+		.hpdev.brdinfo = &mlxplat_mlxcpld_fan[3],
+		.hpdev.nr = 14,
+	},
+};
+
+static struct mlxreg_core_item mlxplat_mlxcpld_default_items[] = {
+	{
+		.data = mlxplat_mlxcpld_default_psu_items_data,
+		.aggr_mask = MLXPLAT_CPLD_AGGR_PSU_MASK_DEF,
+		.reg = MLXPLAT_CPLD_LPC_REG_PSU_OFFSET,
+		.mask = MLXPLAT_CPLD_PSU_MASK,
+		.count = ARRAY_SIZE(mlxplat_mlxcpld_psu),
+		.inversed = 1,
+		.health = false,
+	},
+	{
+		.data = mlxplat_mlxcpld_default_pwr_items_data,
+		.aggr_mask = MLXPLAT_CPLD_AGGR_PWR_MASK_DEF,
+		.reg = MLXPLAT_CPLD_LPC_REG_PWR_OFFSET,
+		.mask = MLXPLAT_CPLD_PWR_MASK,
+		.count = ARRAY_SIZE(mlxplat_mlxcpld_pwr),
+		.inversed = 0,
+		.health = false,
+	},
+	{
+		.data = mlxplat_mlxcpld_default_fan_items_data,
+		.aggr_mask = MLXPLAT_CPLD_AGGR_FAN_MASK_DEF,
+		.reg = MLXPLAT_CPLD_LPC_REG_FAN_OFFSET,
+		.mask = MLXPLAT_CPLD_FAN_MASK,
+		.count = ARRAY_SIZE(mlxplat_mlxcpld_fan),
+		.inversed = 1,
+		.health = false,
+	},
+};
+
 static
-struct mlxreg_hotplug_platform_data mlxplat_mlxcpld_default_data = {
-	.top_aggr_offset = MLXPLAT_CPLD_LPC_REG_AGGR_ADRR,
-	.top_aggr_mask = MLXPLAT_CPLD_AGGR_MASK_DEF,
-	.top_aggr_psu_mask = MLXPLAT_CPLD_AGGR_PSU_MASK_DEF,
-	.psu_reg_offset = MLXPLAT_CPLD_LPC_REG_PSU_ADRR,
-	.psu_mask = MLXPLAT_CPLD_PSU_MASK,
-	.psu_count = ARRAY_SIZE(mlxplat_mlxcpld_psu),
-	.psu = mlxplat_mlxcpld_psu,
-	.top_aggr_pwr_mask = MLXPLAT_CPLD_AGGR_PWR_MASK_DEF,
-	.pwr_reg_offset = MLXPLAT_CPLD_LPC_REG_PWR_ADRR,
-	.pwr_mask = MLXPLAT_CPLD_PWR_MASK,
-	.pwr_count = ARRAY_SIZE(mlxplat_mlxcpld_pwr),
-	.pwr = mlxplat_mlxcpld_pwr,
-	.top_aggr_fan_mask = MLXPLAT_CPLD_AGGR_FAN_MASK_DEF,
-	.fan_reg_offset = MLXPLAT_CPLD_LPC_REG_FAN_ADRR,
-	.fan_mask = MLXPLAT_CPLD_FAN_MASK,
-	.fan_count = ARRAY_SIZE(mlxplat_mlxcpld_fan),
-	.fan = mlxplat_mlxcpld_fan,
+struct mlxreg_core_hotplug_platform_data mlxplat_mlxcpld_default_data = {
+	.items = mlxplat_mlxcpld_default_items,
+	.counter = ARRAY_SIZE(mlxplat_mlxcpld_default_items),
+	.cell = MLXPLAT_CPLD_LPC_REG_AGGR_OFFSET,
+	.mask = MLXPLAT_CPLD_AGGR_MASK_DEF,
 };
 
 /* Platform hotplug MSN21xx system family data */
+static struct mlxreg_core_item mlxplat_mlxcpld_msn21xx_items[] = {
+	{
+		.data = mlxplat_mlxcpld_default_pwr_items_data,
+		.aggr_mask = MLXPLAT_CPLD_AGGR_PWR_MASK_DEF,
+		.reg = MLXPLAT_CPLD_LPC_REG_PWR_OFFSET,
+		.mask = MLXPLAT_CPLD_PWR_MASK,
+		.count = ARRAY_SIZE(mlxplat_mlxcpld_pwr),
+		.inversed = 0,
+		.health = false,
+	},
+};
+
 static
-struct mlxreg_hotplug_platform_data mlxplat_mlxcpld_msn21xx_data = {
-	.top_aggr_offset = MLXPLAT_CPLD_LPC_REG_AGGR_ADRR,
-	.top_aggr_mask = MLXPLAT_CPLD_AGGR_MASK_MSN21XX,
-	.top_aggr_pwr_mask = MLXPLAT_CPLD_AGGR_MASK_MSN21XX,
-	.pwr_reg_offset = MLXPLAT_CPLD_LPC_REG_PWR_ADRR,
-	.pwr_mask = MLXPLAT_CPLD_PWR_MASK,
-	.pwr_count = ARRAY_SIZE(mlxplat_mlxcpld_pwr),
+struct mlxreg_core_hotplug_platform_data mlxplat_mlxcpld_msn21xx_data = {
+	.items = mlxplat_mlxcpld_msn21xx_items,
+	.counter = ARRAY_SIZE(mlxplat_mlxcpld_msn21xx_items),
+	.cell = MLXPLAT_CPLD_LPC_REG_AGGR_OFFSET,
+	.mask = MLXPLAT_CPLD_AGGR_MASK_DEF,
+};
+
+struct mlxplat_mlxcpld_regmap_context {
+	void __iomem *base;
+};
+
+static struct mlxplat_mlxcpld_regmap_context mlxplat_mlxcpld_regmap_ctx;
+
+static int
+mlxplat_mlxcpld_reg_read(void *context, unsigned int reg, unsigned int *val)
+{
+	struct mlxplat_mlxcpld_regmap_context *ctx = context;
+
+	*val = ioread8(ctx->base + reg);
+	return 0;
+}
+
+static int
+mlxplat_mlxcpld_reg_write(void *context, unsigned int reg, unsigned int val)
+{
+	struct mlxplat_mlxcpld_regmap_context *ctx = context;
+
+	iowrite8(val, ctx->base + reg);
+	return 0;
+}
+
+static const struct regmap_config mlxplat_mlxcpld_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = 255,
+	.reg_read = mlxplat_mlxcpld_reg_read,
+	.reg_write = mlxplat_mlxcpld_reg_write,
 };
 
 static struct resource mlxplat_mlxcpld_resources[] = {
@@ -217,7 +335,7 @@ static struct resource mlxplat_mlxcpld_resources[] = {
 };
 
 static struct platform_device *mlxplat_dev;
-static struct mlxreg_hotplug_platform_data *mlxplat_hotplug;
+static struct mlxreg_core_hotplug_platform_data *mlxplat_hotplug;
 
 static int __init mlxplat_dmi_default_matched(const struct dmi_system_id *dmi)
 {
@@ -328,6 +446,21 @@ static int __init mlxplat_init(void)
 		}
 	}
 
+	mlxplat_mlxcpld_regmap_ctx.base = devm_ioport_map(&mlxplat_dev->dev,
+			       mlxplat_lpc_resources[1].start, 1);
+	if (IS_ERR(mlxplat_mlxcpld_regmap_ctx.base)) {
+		err = PTR_ERR(mlxplat_mlxcpld_regmap_ctx.base);
+		goto fail_platform_mux_register;
+	}
+
+	mlxplat_hotplug->regmap = devm_regmap_init(&mlxplat_dev->dev, NULL,
+					&mlxplat_mlxcpld_regmap_ctx,
+					&mlxplat_mlxcpld_regmap_config);
+	if (IS_ERR(mlxplat_hotplug->regmap)) {
+		err = PTR_ERR(mlxplat_hotplug->regmap);
+		goto fail_platform_mux_register;
+	}
+
 	priv->pdev_hotplug = platform_device_register_resndata(
 				&mlxplat_dev->dev, "mlxreg-hotplug",
 				PLATFORM_DEVID_NONE,

include/linux/platform_data/mlxreg.h

@@ -34,8 +34,11 @@
 #ifndef __LINUX_PLATFORM_DATA_MLXREG_H
 #define __LINUX_PLATFORM_DATA_MLXREG_H
 
+#define MLXREG_CORE_LABEL_MAX_SIZE	32
+
 /**
  * struct mlxreg_hotplug_device - I2C device data:
+ *
  * @adapter: I2C device adapter;
  * @client: I2C device client;
  * @brdinfo: device board information;
@@ -47,52 +50,95 @@
 struct mlxreg_hotplug_device {
 	struct i2c_adapter *adapter;
 	struct i2c_client *client;
-	struct i2c_board_info brdinfo;
+	struct i2c_board_info *brdinfo;
 	int nr;
 };
 
 /**
- * struct mlxreg_hotplug_platform_data - device platform data:
- * @top_aggr_offset: offset of top aggregation interrupt register;
- * @top_aggr_mask: top aggregation interrupt common mask;
- * @top_aggr_psu_mask: top aggregation interrupt PSU mask;
- * @psu_reg_offset: offset of PSU interrupt register;
- * @psu_mask: PSU interrupt mask;
- * @psu_count: number of equipped replaceable PSUs;
- * @psu: pointer to PSU devices data array;
- * @top_aggr_pwr_mask: top aggregation interrupt power mask;
- * @pwr_reg_offset: offset of power interrupt register
- * @pwr_mask: power interrupt mask;
- * @pwr_count: number of power sources;
- * @pwr: pointer to power devices data array;
- * @top_aggr_fan_mask: top aggregation interrupt FAN mask;
- * @fan_reg_offset: offset of FAN interrupt register;
- * @fan_mask: FAN interrupt mask;
- * @fan_count: number of equipped replaceable FANs;
- * @fan: pointer to FAN devices data array;
+ * struct mlxreg_core_data - attributes control data:
+ *
+ * @label: attribute label;
+ * @label: attribute register offset;
+ * @reg: attribute register;
+ * @mask: attribute access mask;
+ * @mode: access mode;
+ * @bit: attribute effective bit;
+ * @np - pointer to node platform associated with attribute;
+ * @hpdev - hotplug device data;
+ * @health_cntr: dynamic device health indication counter;
+ * @attached: true if device has been attached after good health indication;
+ */
+struct mlxreg_core_data {
+	char label[MLXREG_CORE_LABEL_MAX_SIZE];
+	u32 reg;
+	u32 mask;
+	u32 bit;
+	umode_t	mode;
+	struct device_node *np;
+	struct mlxreg_hotplug_device hpdev;
+	u8 health_cntr;
+	bool attached;
+};
+
+/**
+ * struct mlxreg_core_item - same type components controlled by the driver:
+ *
+ * @data: component data;
+ * @aggr_mask: group aggregation mask;
+ * @reg: group interrupt status register;
+ * @mask: group interrupt mask;
+ * @cache: last status value for elements fro the same group;
+ * @count: number of available elements in the group;
+ * @ind: element's index inside the group;
+ * @inversed: if 0: 0 for signal status is OK, if 1 - 1 is OK;
+ * @health: true if device has health indication, false in other case;
+ */
+struct mlxreg_core_item {
+	struct mlxreg_core_data *data;
+	u32 aggr_mask;
+	u32 reg;
+	u32 mask;
+	u32 cache;
+	u8 count;
+	u8 ind;
+	u8 inversed;
+	u8 health;
+};
+
+/**
+ * struct mlxreg_core_platform_data - platform data:
+ *
+ * @led_data: led private data;
+ * @regmap: register map of parent device;
+ * @counter: number of led instances;
+ */
+struct mlxreg_core_platform_data {
+	struct mlxreg_core_data *data;
+	void *regmap;
+	int counter;
+};
+
+/**
+ * struct mlxreg_core_hotplug_platform_data - hotplug platform data:
  *
- * Structure represents board platform data, related to system hotplug events,
- * like FAN, PSU, power cable insertion and removing. This data provides the
- * number of hot-pluggable devices and hardware description for event handling.
+ * @items: same type components with the hotplug capability;
+ * @irq: platform interrupt number;
+ * @regmap: register map of parent device;
+ * @counter: number of the components with the hotplug capability;
+ * @cell: location of top aggregation interrupt register;
+ * @mask: top aggregation interrupt common mask;
+ * @cell_low: location of low aggregation interrupt register;
+ * @mask_low: low aggregation interrupt common mask;
  */
-struct mlxreg_hotplug_platform_data {
-	u16 top_aggr_offset;
-	u8 top_aggr_mask;
-	u8 top_aggr_psu_mask;
-	u16 psu_reg_offset;
-	u8 psu_mask;
-	u8 psu_count;
-	struct mlxreg_hotplug_device *psu;
-	u8 top_aggr_pwr_mask;
-	u16 pwr_reg_offset;
-	u8 pwr_mask;
-	u8 pwr_count;
-	struct mlxreg_hotplug_device *pwr;
-	u8 top_aggr_fan_mask;
-	u16 fan_reg_offset;
-	u8 fan_mask;
-	u8 fan_count;
-	struct mlxreg_hotplug_device *fan;
+struct mlxreg_core_hotplug_platform_data {
+	struct mlxreg_core_item *items;
+	int irq;
+	void *regmap;
+	int counter;
+	u32 cell;
+	u32 mask;
+	u32 cell_low;
+	u32 mask_low;
 };
 
 #endif /* __LINUX_PLATFORM_DATA_MLXREG_H */