Input: rename cap1106 driver to cap11xx

There are several devices in cap11xx family besides cap1106. The driver can
be made to support all of them, so let's give it more generic name.
Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Reviewed-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Documentation/devicetree/bindings/input/cap1106.txt → Documentation/devicetree/bindings/input/cap11xx.txt

-Device tree bindings for Microchip CAP1106, 6 channel capacitive touch sensor
+Device tree bindings for Microchip CAP11xx based capacitive touch sensors
 
-The node for this driver must be a child of a I2C controller node, as the
+The node for this device must be a child of a I2C controller node, as the
 device communication via I2C only.
 
 Required properties:
 
-	compatible:		Must be "microchip,cap1106"
+	compatible:		Must contain one of:
+					"microchip,cap1106"
 
 	reg:			The I2C slave address of the device.
 				Only 0x28 is valid.
@@ -43,11 +44,11 @@ i2c_controller {
 		autorepeat;
 		microchip,sensor-gain = <2>;
 
-		linux,keycodes = <103		/* KEY_UP */
-				  106		/* KEY_RIGHT */
-				  108		/* KEY_DOWN */
-				  105		/* KEY_LEFT */
-				  109		/* KEY_PAGEDOWN */
-				  104>;		/* KEY_PAGEUP */
+		linux,keycodes = <103>,		/* KEY_UP */
+				 <106>,		/* KEY_RIGHT */
+				 <108>,		/* KEY_DOWN */
+				 <105>,		/* KEY_LEFT */
+				 <109>,		/* KEY_PAGEDOWN */
+				 <104>;		/* KEY_PAGEUP */
 	};
 }

drivers/input/keyboard/Kconfig

@@ -665,14 +665,14 @@ config KEYBOARD_CROS_EC
 	  To compile this driver as a module, choose M here: the
 	  module will be called cros_ec_keyb.
 
-config KEYBOARD_CAP1106
-	tristate "Microchip CAP1106 touch sensor"
+config KEYBOARD_CAP11XX
+	tristate "Microchip CAP11XX based touch sensors"
 	depends on OF && I2C
 	select REGMAP_I2C
 	help
-	  Say Y here to enable the CAP1106 touch sensor driver.
+	  Say Y here to enable the CAP11XX touch sensor driver.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called cap1106.
+	  module will be called cap11xx.
 
 endif

drivers/input/keyboard/Makefile

@@ -11,7 +11,7 @@ obj-$(CONFIG_KEYBOARD_AMIGA)		+= amikbd.o
 obj-$(CONFIG_KEYBOARD_ATARI)		+= atakbd.o
 obj-$(CONFIG_KEYBOARD_ATKBD)		+= atkbd.o
 obj-$(CONFIG_KEYBOARD_BFIN)		+= bf54x-keys.o
-obj-$(CONFIG_KEYBOARD_CAP1106)		+= cap1106.o
+obj-$(CONFIG_KEYBOARD_CAP11XX)		+= cap11xx.o
 obj-$(CONFIG_KEYBOARD_CLPS711X)		+= clps711x-keypad.o
 obj-$(CONFIG_KEYBOARD_CROS_EC)		+= cros_ec_keyb.o
 obj-$(CONFIG_KEYBOARD_DAVINCI)		+= davinci_keyscan.o