Commit c7b28f52 authored by Jason A. Donenfeld's avatar Jason A. Donenfeld Committed by Jani Nikula

drm/i915/display: Re-add check for low voltage sku for max dp source rate

This reverts commit 73867c87 ("drm/i915/display: Remove check for
low voltage sku for max dp source rate"), which, on an i7-11850H iGPU
with a Thinkpad X1 Extreme Gen 4, attached to a LG LP160UQ1-SPB1
embedded panel, causes wild flickering glitching technicolor
pyrotechnics on resumption from suspend. The display shows strobing
colors in an utter disaster explosion of pantone, as though bombs were
dropped on the leprechauns at the base of the rainbow.

Rebooting the machine fixes the issue, presumably because the display is
initialized by firmware rather than by i915. Otherwise, the GPU appears
to work fine.

Bisection traced it back to this commit, which makes sense given the
issues.

Note: This re-opens, and puts back to the drawing board,
https://gitlab.freedesktop.org/drm/intel/-/issues/5272 which was fixed
by the regressing commit.

Fixes: 73867c87 ("drm/i915/display: Remove check for low voltage sku for max dp source rate")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6205
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Jani Saarinen <jani.saarinen@intel.com>
Signed-off-by: default avatarJason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: default avatarJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220613102241.9236-1-Jason@zx2c4.com
(cherry picked from commit d5929835)
Signed-off-by: default avatarJani Nikula <jani.nikula@intel.com>
parent 3828296a
......@@ -388,13 +388,23 @@ static int dg2_max_source_rate(struct intel_dp *intel_dp)
return intel_dp_is_edp(intel_dp) ? 810000 : 1350000;
}
static bool is_low_voltage_sku(struct drm_i915_private *i915, enum phy phy)
{
u32 voltage;
voltage = intel_de_read(i915, ICL_PORT_COMP_DW3(phy)) & VOLTAGE_INFO_MASK;
return voltage == VOLTAGE_INFO_0_85V;
}
static int icl_max_source_rate(struct intel_dp *intel_dp)
{
struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev);
enum phy phy = intel_port_to_phy(dev_priv, dig_port->base.port);
if (intel_phy_is_combo(dev_priv, phy) && !intel_dp_is_edp(intel_dp))
if (intel_phy_is_combo(dev_priv, phy) &&
(is_low_voltage_sku(dev_priv, phy) || !intel_dp_is_edp(intel_dp)))
return 540000;
return 810000;
......@@ -402,7 +412,23 @@ static int icl_max_source_rate(struct intel_dp *intel_dp)
static int ehl_max_source_rate(struct intel_dp *intel_dp)
{
if (intel_dp_is_edp(intel_dp))
struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev);
enum phy phy = intel_port_to_phy(dev_priv, dig_port->base.port);
if (intel_dp_is_edp(intel_dp) || is_low_voltage_sku(dev_priv, phy))
return 540000;
return 810000;
}
static int dg1_max_source_rate(struct intel_dp *intel_dp)
{
struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
struct drm_i915_private *i915 = to_i915(dig_port->base.base.dev);
enum phy phy = intel_port_to_phy(i915, dig_port->base.port);
if (intel_phy_is_combo(i915, phy) && is_low_voltage_sku(i915, phy))
return 540000;
return 810000;
......@@ -445,7 +471,7 @@ intel_dp_set_source_rates(struct intel_dp *intel_dp)
max_rate = dg2_max_source_rate(intel_dp);
else if (IS_ALDERLAKE_P(dev_priv) || IS_ALDERLAKE_S(dev_priv) ||
IS_DG1(dev_priv) || IS_ROCKETLAKE(dev_priv))
max_rate = 810000;
max_rate = dg1_max_source_rate(intel_dp);
else if (IS_JSL_EHL(dev_priv))
max_rate = ehl_max_source_rate(intel_dp);
else
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment