Commit c7ce74bc authored by Mugunthan V N's avatar Mugunthan V N Committed by Tony Lindgren

ARM: dts: am335x: fix cd-gpios definition as per hardware design and dt binding docs

As per mmc device tree binding documentation card detect gpio has
to be active low signal. When a hardware is designed with active
high card detect, gpio polarity has to be changed with
cd-inverted dt property.

In AM335x the card detect gpio is designed as active low gpio.
So correcting the dt card detect gpio definition.
Signed-off-by: default avatarMugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent 3993fa63
...@@ -383,8 +383,7 @@ &mmc1 { ...@@ -383,8 +383,7 @@ &mmc1 {
bus-width = <0x4>; bus-width = <0x4>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>; pinctrl-0 = <&mmc1_pins>;
cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
cd-inverted;
}; };
&aes { &aes {
......
...@@ -737,7 +737,7 @@ &mmc1 { ...@@ -737,7 +737,7 @@ &mmc1 {
bus-width = <4>; bus-width = <4>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>; pinctrl-0 = <&mmc1_pins>;
cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
}; };
&mmc3 { &mmc3 {
......
...@@ -647,7 +647,7 @@ &mmc1 { ...@@ -647,7 +647,7 @@ &mmc1 {
bus-width = <4>; bus-width = <4>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>; pinctrl-0 = <&mmc1_pins>;
cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
}; };
&sham { &sham {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment