Commit c7d7ea67 authored by Romain Perier's avatar Romain Perier Committed by Gregory CLEMENT

arm64: dts: marvell: Add I2C definitions for the Armada 3700

The Armada 3700 has two i2c bus interface units, this commit adds the
definitions of the corresponding device nodes. It also enables the node
on the development board for this SoC.
Signed-off-by: default avatarRomain Perier <romain.perier@free-electrons.com>
Acked-by: default avatarGregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: default avatarGregory CLEMENT <gregory.clement@free-electrons.com>
parent bc357393
...@@ -62,6 +62,10 @@ memory@0 { ...@@ -62,6 +62,10 @@ memory@0 {
}; };
}; };
&i2c0 {
status = "okay";
};
/* CON3 */ /* CON3 */
&sata { &sata {
status = "okay"; status = "okay";
......
...@@ -109,6 +109,24 @@ spi0: spi@10600 { ...@@ -109,6 +109,24 @@ spi0: spi@10600 {
status = "disabled"; status = "disabled";
}; };
i2c0: i2c@11000 {
compatible = "marvell,armada-3700-i2c";
reg = <0x11000 0x24>;
clocks = <&nb_periph_clk 10>;
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
mrvl,i2c-fast-mode;
status = "disabled";
};
i2c1: i2c@11080 {
compatible = "marvell,armada-3700-i2c";
reg = <0x11080 0x24>;
clocks = <&nb_periph_clk 9>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
mrvl,i2c-fast-mode;
status = "disabled";
};
uart0: serial@12000 { uart0: serial@12000 {
compatible = "marvell,armada-3700-uart"; compatible = "marvell,armada-3700-uart";
reg = <0x12000 0x400>; reg = <0x12000 0x400>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment