Commit c7f40ff1 authored by john stultz's avatar john stultz Committed by Linus Torvalds

[PATCH] i386: Kill references to xtime

Remove all references to xtime in i386 and replace them w/
get/set_timeofday().  Requires some ugly and uncertain changes to APM, but
has been lightly tested to work.
Signed-off-by: default avatarJohn Stultz <johnstul@us.ibm.com>
Acked-by: default avatarIngo Molnar <mingo@elte.hu>
Acked-by: default avatarMikael Pettersson <mikpe@it.uu.se>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent 0f0f1b40
......@@ -1154,9 +1154,11 @@ static void queue_event(apm_event_t event, struct apm_user *sender)
static void set_time(void)
{
struct timespec ts;
if (got_clock_diff) { /* Must know time zone in order to set clock */
xtime.tv_sec = get_cmos_time() + clock_cmos_diff;
xtime.tv_nsec = 0;
ts.tv_sec = get_cmos_time() + clock_cmos_diff;
ts.tv_nsec = 0;
do_settimeofday(&ts);
}
}
......@@ -1232,13 +1234,8 @@ static int suspend(int vetoable)
restore_processor_state();
local_irq_disable();
write_seqlock(&xtime_lock);
spin_lock(&i8253_lock);
reinit_timer();
set_time();
spin_unlock(&i8253_lock);
write_sequnlock(&xtime_lock);
reinit_timer();
if (err == APM_NO_ERROR)
err = APM_SUCCESS;
......@@ -1365,9 +1362,7 @@ static void check_events(void)
ignore_bounce = 1;
if ((event != APM_NORMAL_RESUME)
|| (ignore_normal_resume == 0)) {
write_seqlock_irq(&xtime_lock);
set_time();
write_sequnlock_irq(&xtime_lock);
device_resume();
pm_send_all(PM_RESUME, (void *)0);
queue_event(event, NULL);
......@@ -1383,9 +1378,7 @@ static void check_events(void)
break;
case APM_UPDATE_TIME:
write_seqlock_irq(&xtime_lock);
set_time();
write_sequnlock_irq(&xtime_lock);
break;
case APM_CRITICAL_SUSPEND:
......
......@@ -288,7 +288,7 @@ static int timer_resume(struct sys_device *dev)
unsigned long flags;
unsigned long sec;
unsigned long sleep_length;
struct timespec ts;
#ifdef CONFIG_HPET_TIMER
if (is_hpet_enabled())
hpet_reenable();
......@@ -296,9 +296,11 @@ static int timer_resume(struct sys_device *dev)
setup_pit_timer();
sec = get_cmos_time() + clock_cmos_diff;
sleep_length = (get_cmos_time() - sleep_start) * HZ;
ts.tv_sec = sec;
ts.tv_nsec = 0;
do_settimeofday(&ts);
write_seqlock_irqsave(&xtime_lock, flags);
xtime.tv_sec = sec;
xtime.tv_nsec = 0;
jiffies_64 += sleep_length;
wall_jiffies += sleep_length;
write_sequnlock_irqrestore(&xtime_lock, flags);
......@@ -334,10 +336,11 @@ extern void (*late_time_init)(void);
/* Duplicate of time_init() below, with hpet_enable part added */
static void __init hpet_time_init(void)
{
xtime.tv_sec = get_cmos_time();
xtime.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ);
set_normalized_timespec(&wall_to_monotonic,
-xtime.tv_sec, -xtime.tv_nsec);
struct timespec ts;
ts.tv_sec = get_cmos_time();
ts.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ);
do_settimeofday(&ts);
if ((hpet_enable() >= 0) && hpet_use_timer) {
printk("Using HPET for base-timer\n");
......@@ -349,6 +352,7 @@ static void __init hpet_time_init(void)
void __init time_init(void)
{
struct timespec ts;
#ifdef CONFIG_HPET_TIMER
if (is_hpet_capable()) {
/*
......@@ -359,10 +363,10 @@ void __init time_init(void)
return;
}
#endif
xtime.tv_sec = get_cmos_time();
xtime.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ);
set_normalized_timespec(&wall_to_monotonic,
-xtime.tv_sec, -xtime.tv_nsec);
ts.tv_sec = get_cmos_time();
ts.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ);
do_settimeofday(&ts);
time_init_hook();
}
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment