mfd: max77843: Add max77843 MFD driver core driver

This patch adds MAX77843 core/irq driver to support PMIC,
MUIC(Micro USB Interface Controller), Charger, Fuel Gauge,
LED and Haptic device.
Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

drivers/mfd/Kconfig

@@ -456,6 +456,20 @@ config MFD_MAX77693
 	  additional drivers must be enabled in order to use the functionality
 	  of the device.
 
+config MFD_MAX77843
+	bool "Maxim Semiconductor MAX77843 PMIC Support"
+	depends on I2C=y
+	select MFD_CORE
+	select REGMAP_I2C
+	select REGMAP_IRQ
+	help
+	  Say yes here to add support for Maxim Semiconductor MAX77843.
+	  This is companion Power Management IC with LEDs, Haptic, Charger,
+	  Fuel Gauge, MUIC(Micro USB Interface Controller) controls on chip.
+	  This driver provides common support for accessing the device;
+	  additional drivers must be enabled in order to use the functionality
+	  of the device.
+
 config MFD_MAX8907
 	tristate "Maxim Semiconductor MAX8907 PMIC Support"
 	select MFD_CORE

drivers/mfd/Makefile

@@ -117,6 +117,7 @@ obj-$(CONFIG_MFD_DA9150)	+= da9150-core.o
 obj-$(CONFIG_MFD_MAX14577)	+= max14577.o
 obj-$(CONFIG_MFD_MAX77686)	+= max77686.o
 obj-$(CONFIG_MFD_MAX77693)	+= max77693.o
+obj-$(CONFIG_MFD_MAX77843)	+= max77843.o
 obj-$(CONFIG_MFD_MAX8907)	+= max8907.o
 max8925-objs			:= max8925-core.o max8925-i2c.o
 obj-$(CONFIG_MFD_MAX8925)	+= max8925.o

drivers/mfd/max77843.c

+/*
+ * MFD core driver for the Maxim MAX77843
+ *
+ * Copyright (C) 2015 Samsung Electronics
+ * Author: Jaewon Kim <jaewon02.kim@samsung.com>
+ * Author: Beomho Seo <beomho.seo@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/max77843-private.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+static const struct mfd_cell max77843_devs[] = {
+	{
+		.name = "max77843-muic",
+		.of_compatible = "maxim,max77843-muic",
+	}, {
+		.name = "max77843-regulator",
+		.of_compatible = "maxim,max77843-regulator",
+	}, {
+		.name = "max77843-charger",
+		.of_compatible = "maxim,max77843-charger"
+	}, {
+		.name = "max77843-fuelgauge",
+		.of_compatible = "maxim,max77843-fuelgauge",
+	}, {
+		.name = "max77843-haptic",
+		.of_compatible = "maxim,max77843-haptic",
+	},
+};
+
+static const struct regmap_config max77843_charger_regmap_config = {
+	.reg_bits	= 8,
+	.val_bits	= 8,
+	.max_register	= MAX77843_CHG_REG_END,
+};
+
+static const struct regmap_config max77843_regmap_config = {
+	.reg_bits	= 8,
+	.val_bits	= 8,
+	.max_register	= MAX77843_SYS_REG_END,
+};
+
+static const struct regmap_irq max77843_irqs[] = {
+	/* TOPSYS interrupts */
+	{ .reg_offset = 0, .mask = MAX77843_SYS_IRQ_SYSUVLO_INT, },
+	{ .reg_offset = 0, .mask = MAX77843_SYS_IRQ_SYSOVLO_INT, },
+	{ .reg_offset = 0, .mask = MAX77843_SYS_IRQ_TSHDN_INT, },
+	{ .reg_offset = 0, .mask = MAX77843_SYS_IRQ_TM_INT, },
+};
+
+static const struct regmap_irq_chip max77843_irq_chip = {
+	.name		= "max77843",
+	.status_base	= MAX77843_SYS_REG_SYSINTSRC,
+	.mask_base	= MAX77843_SYS_REG_SYSINTMASK,
+	.mask_invert	= false,
+	.num_regs	= 1,
+	.irqs		= max77843_irqs,
+	.num_irqs	= ARRAY_SIZE(max77843_irqs),
+};
+
+/* Charger and Charger regulator use same regmap. */
+static int max77843_chg_init(struct max77843 *max77843)
+{
+	int ret;
+
+	max77843->i2c_chg = i2c_new_dummy(max77843->i2c->adapter, I2C_ADDR_CHG);
+	if (!max77843->i2c_chg) {
+		dev_err(&max77843->i2c->dev,
+				"Cannot allocate I2C device for Charger\n");
+		return PTR_ERR(max77843->i2c_chg);
+	}
+	i2c_set_clientdata(max77843->i2c_chg, max77843);
+
+	max77843->regmap_chg = devm_regmap_init_i2c(max77843->i2c_chg,
+			&max77843_charger_regmap_config);
+	if (IS_ERR(max77843->regmap_chg)) {
+		ret = PTR_ERR(max77843->regmap_chg);
+		goto err_chg_i2c;
+	}
+
+	return 0;
+
+err_chg_i2c:
+	i2c_unregister_device(max77843->i2c_chg);
+
+	return ret;
+}
+
+static int max77843_probe(struct i2c_client *i2c,
+			  const struct i2c_device_id *id)
+{
+	struct max77843 *max77843;
+	unsigned int reg_data;
+	int ret;
+
+	max77843 = devm_kzalloc(&i2c->dev, sizeof(*max77843), GFP_KERNEL);
+	if (!max77843)
+		return -ENOMEM;
+
+	i2c_set_clientdata(i2c, max77843);
+	max77843->dev = &i2c->dev;
+	max77843->i2c = i2c;
+	max77843->irq = i2c->irq;
+
+	max77843->regmap = devm_regmap_init_i2c(i2c,
+			&max77843_regmap_config);
+	if (IS_ERR(max77843->regmap)) {
+		dev_err(&i2c->dev, "Failed to allocate topsys register map\n");
+		return PTR_ERR(max77843->regmap);
+	}
+
+	ret = regmap_add_irq_chip(max77843->regmap, max77843->irq,
+			IRQF_TRIGGER_LOW | IRQF_ONESHOT | IRQF_SHARED,
+			0, &max77843_irq_chip, &max77843->irq_data);
+	if (ret) {
+		dev_err(&i2c->dev, "Failed to add TOPSYS IRQ chip\n");
+		return ret;
+	}
+
+	ret = regmap_read(max77843->regmap,
+			MAX77843_SYS_REG_PMICID, &reg_data);
+	if (ret < 0) {
+		dev_err(&i2c->dev, "Failed to read PMIC ID\n");
+		goto err_pmic_id;
+	}
+	dev_info(&i2c->dev, "device ID: 0x%x\n", reg_data);
+
+	ret = max77843_chg_init(max77843);
+	if (ret) {
+		dev_err(&i2c->dev, "Failed to init Charger\n");
+		goto err_pmic_id;
+	}
+
+	ret = regmap_update_bits(max77843->regmap,
+				 MAX77843_SYS_REG_INTSRCMASK,
+				 MAX77843_INTSRC_MASK_MASK,
+				 (unsigned int)~MAX77843_INTSRC_MASK_MASK);
+	if (ret < 0) {
+		dev_err(&i2c->dev, "Failed to unmask interrupt source\n");
+		goto err_pmic_id;
+	}
+
+	ret = mfd_add_devices(max77843->dev, -1, max77843_devs,
+			      ARRAY_SIZE(max77843_devs), NULL, 0, NULL);
+	if (ret < 0) {
+		dev_err(&i2c->dev, "Failed to add mfd device\n");
+		goto err_pmic_id;
+	}
+
+	device_init_wakeup(max77843->dev, true);
+
+	return 0;
+
+err_pmic_id:
+	regmap_del_irq_chip(max77843->irq, max77843->irq_data);
+
+	return ret;
+}
+
+static int max77843_remove(struct i2c_client *i2c)
+{
+	struct max77843 *max77843 = i2c_get_clientdata(i2c);
+
+	mfd_remove_devices(max77843->dev);
+
+	regmap_del_irq_chip(max77843->irq, max77843->irq_data);
+
+	i2c_unregister_device(max77843->i2c_chg);
+
+	return 0;
+}
+
+static const struct of_device_id max77843_dt_match[] = {
+	{ .compatible = "maxim,max77843", },
+	{ },
+};
+
+static const struct i2c_device_id max77843_id[] = {
+	{ "max77843", },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, max77843_id);
+
+static int __maybe_unused max77843_suspend(struct device *dev)
+{
+	struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+	struct max77843 *max77843 = i2c_get_clientdata(i2c);
+
+	disable_irq(max77843->irq);
+	if (device_may_wakeup(dev))
+		enable_irq_wake(max77843->irq);
+
+	return 0;
+}
+
+static int __maybe_unused max77843_resume(struct device *dev)
+{
+	struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+	struct max77843 *max77843 = i2c_get_clientdata(i2c);
+
+	if (device_may_wakeup(dev))
+		disable_irq_wake(max77843->irq);
+	enable_irq(max77843->irq);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(max77843_pm, max77843_suspend, max77843_resume);
+
+static struct i2c_driver max77843_i2c_driver = {
+	.driver	= {
+		.name = "max77843",
+		.pm = &max77843_pm,
+		.of_match_table = max77843_dt_match,
+	},
+	.probe = max77843_probe,
+	.remove = max77843_remove,
+	.id_table = max77843_id,
+};
+
+static int __init max77843_i2c_init(void)
+{
+	return i2c_add_driver(&max77843_i2c_driver);
+}
+subsys_initcall(max77843_i2c_init);
+
+static void __exit max77843_i2c_exit(void)
+{
+	i2c_del_driver(&max77843_i2c_driver);
+}
+module_exit(max77843_i2c_exit);