[CPUFREQ] EXYNOS4210: Remove code about bus on cpufreq

This patch removes code for bus on cpufreq because the code
for bus frequency changing moves to busfreq driver.
So code about bus on cpufreq is not necessary.
Signed-off-by: Jaecheol Lee <jc.lee@samsung.com>
Signed-off-by: Jongpill Lee <boyko.lee@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Dave Jones <davej@redhat.com>

drivers/cpufreq/exynos4210-cpufreq.c

@@ -33,21 +33,13 @@ static struct clk *mout_mpll;
 static struct clk *mout_apll;
 
 static struct regulator *arm_regulator;
-static struct regulator *int_regulator;
 
 static struct cpufreq_freqs freqs;
-static unsigned int memtype;
 
 static unsigned int locking_frequency;
 static bool frequency_locked;
 static DEFINE_MUTEX(cpufreq_lock);
 
-enum exynos4_memory_type {
-	DDR2 = 4,
-	LPDDR2,
-	DDR3,
-};
-
 enum cpufreq_level_index {
 	L0, L1, L2, L3, CPUFREQ_LEVEL_END,
 };
@@ -99,87 +91,24 @@ static unsigned int clkdiv_cpu1[CPUFREQ_LEVEL_END][2] = {
 	{ 3, 0 },
 };
 
-static unsigned int clkdiv_dmc0[CPUFREQ_LEVEL_END][8] = {
-	/*
-	 * Clock divider value for following
-	 * { DIVACP, DIVACP_PCLK, DIVDPHY, DIVDMC, DIVDMCD
-	 *		DIVDMCP, DIVCOPY2, DIVCORE_TIMERS }
-	 */
-
-	/* DMC L0: 400MHz */
-	{ 3, 1, 1, 1, 1, 1, 3, 1 },
-
-	/* DMC L1: 400MHz */
-	{ 3, 1, 1, 1, 1, 1, 3, 1 },
-
-	/* DMC L2: 266.7MHz */
-	{ 7, 1, 1, 2, 1, 1, 3, 1 },
-
-	/* DMC L3: 200MHz */
-	{ 7, 1, 1, 3, 1, 1, 3, 1 },
-};
-
-static unsigned int clkdiv_top[CPUFREQ_LEVEL_END][5] = {
-	/*
-	 * Clock divider value for following
-	 * { DIVACLK200, DIVACLK100, DIVACLK160, DIVACLK133, DIVONENAND }
-	 */
-
-	/* ACLK200 L0: 200MHz */
-	{ 3, 7, 4, 5, 1 },
-
-	/* ACLK200 L1: 200MHz */
-	{ 3, 7, 4, 5, 1 },
-
-	/* ACLK200 L2: 160MHz */
-	{ 4, 7, 5, 7, 1 },
-
-	/* ACLK200 L3: 133.3MHz */
-	{ 5, 7, 7, 7, 1 },
-};
-
-static unsigned int clkdiv_lr_bus[CPUFREQ_LEVEL_END][2] = {
-	/*
-	 * Clock divider value for following
-	 * { DIVGDL/R, DIVGPL/R }
-	 */
-
-	/* ACLK_GDL/R L0: 200MHz */
-	{ 3, 1 },
-
-	/* ACLK_GDL/R L1: 200MHz */
-	{ 3, 1 },
-
-	/* ACLK_GDL/R L2: 160MHz */
-	{ 4, 1 },
-
-	/* ACLK_GDL/R L3: 133.3MHz */
-	{ 5, 1 },
-};
-
 struct cpufreq_voltage_table {
 	unsigned int	index;		/* any */
 	unsigned int	arm_volt;	/* uV */
-	unsigned int	int_volt;
 };
 
 static struct cpufreq_voltage_table exynos4_volt_table[CPUFREQ_LEVEL_END] = {
 	{
 		.index		= L0,
 		.arm_volt	= 1200000,
-		.int_volt	= 1100000,
 	}, {
 		.index		= L1,
 		.arm_volt	= 1100000,
-		.int_volt	= 1100000,
 	}, {
 		.index		= L2,
 		.arm_volt	= 1000000,
-		.int_volt	= 1000000,
 	}, {
 		.index		= L3,
 		.arm_volt	= 900000,
-		.int_volt	= 1000000,
 	},
 };
 
@@ -248,80 +177,6 @@ static void exynos4_set_clkdiv(unsigned int div_index)
 	do {
 		tmp = __raw_readl(S5P_CLKDIV_STATCPU1);
 	} while (tmp & 0x11);
-
-	/* Change Divider - DMC0 */
-
-	tmp = __raw_readl(S5P_CLKDIV_DMC0);
-
-	tmp &= ~(S5P_CLKDIV_DMC0_ACP_MASK | S5P_CLKDIV_DMC0_ACPPCLK_MASK |
-		S5P_CLKDIV_DMC0_DPHY_MASK | S5P_CLKDIV_DMC0_DMC_MASK |
-		S5P_CLKDIV_DMC0_DMCD_MASK | S5P_CLKDIV_DMC0_DMCP_MASK |
-		S5P_CLKDIV_DMC0_COPY2_MASK | S5P_CLKDIV_DMC0_CORETI_MASK);
-
-	tmp |= ((clkdiv_dmc0[div_index][0] << S5P_CLKDIV_DMC0_ACP_SHIFT) |
-		(clkdiv_dmc0[div_index][1] << S5P_CLKDIV_DMC0_ACPPCLK_SHIFT) |
-		(clkdiv_dmc0[div_index][2] << S5P_CLKDIV_DMC0_DPHY_SHIFT) |
-		(clkdiv_dmc0[div_index][3] << S5P_CLKDIV_DMC0_DMC_SHIFT) |
-		(clkdiv_dmc0[div_index][4] << S5P_CLKDIV_DMC0_DMCD_SHIFT) |
-		(clkdiv_dmc0[div_index][5] << S5P_CLKDIV_DMC0_DMCP_SHIFT) |
-		(clkdiv_dmc0[div_index][6] << S5P_CLKDIV_DMC0_COPY2_SHIFT) |
-		(clkdiv_dmc0[div_index][7] << S5P_CLKDIV_DMC0_CORETI_SHIFT));
-
-	__raw_writel(tmp, S5P_CLKDIV_DMC0);
-
-	do {
-		tmp = __raw_readl(S5P_CLKDIV_STAT_DMC0);
-	} while (tmp & 0x11111111);
-
-	/* Change Divider - TOP */
-
-	tmp = __raw_readl(S5P_CLKDIV_TOP);
-
-	tmp &= ~(S5P_CLKDIV_TOP_ACLK200_MASK | S5P_CLKDIV_TOP_ACLK100_MASK |
-		S5P_CLKDIV_TOP_ACLK160_MASK | S5P_CLKDIV_TOP_ACLK133_MASK |
-		S5P_CLKDIV_TOP_ONENAND_MASK);
-
-	tmp |= ((clkdiv_top[div_index][0] << S5P_CLKDIV_TOP_ACLK200_SHIFT) |
-		(clkdiv_top[div_index][1] << S5P_CLKDIV_TOP_ACLK100_SHIFT) |
-		(clkdiv_top[div_index][2] << S5P_CLKDIV_TOP_ACLK160_SHIFT) |
-		(clkdiv_top[div_index][3] << S5P_CLKDIV_TOP_ACLK133_SHIFT) |
-		(clkdiv_top[div_index][4] << S5P_CLKDIV_TOP_ONENAND_SHIFT));
-
-	__raw_writel(tmp, S5P_CLKDIV_TOP);
-
-	do {
-		tmp = __raw_readl(S5P_CLKDIV_STAT_TOP);
-	} while (tmp & 0x11111);
-
-	/* Change Divider - LEFTBUS */
-
-	tmp = __raw_readl(S5P_CLKDIV_LEFTBUS);
-
-	tmp &= ~(S5P_CLKDIV_BUS_GDLR_MASK | S5P_CLKDIV_BUS_GPLR_MASK);
-
-	tmp |= ((clkdiv_lr_bus[div_index][0] << S5P_CLKDIV_BUS_GDLR_SHIFT) |
-		(clkdiv_lr_bus[div_index][1] << S5P_CLKDIV_BUS_GPLR_SHIFT));
-
-	__raw_writel(tmp, S5P_CLKDIV_LEFTBUS);
-
-	do {
-		tmp = __raw_readl(S5P_CLKDIV_STAT_LEFTBUS);
-	} while (tmp & 0x11);
-
-	/* Change Divider - RIGHTBUS */
-
-	tmp = __raw_readl(S5P_CLKDIV_RIGHTBUS);
-
-	tmp &= ~(S5P_CLKDIV_BUS_GDLR_MASK | S5P_CLKDIV_BUS_GPLR_MASK);
-
-	tmp |= ((clkdiv_lr_bus[div_index][0] << S5P_CLKDIV_BUS_GDLR_SHIFT) |
-		(clkdiv_lr_bus[div_index][1] << S5P_CLKDIV_BUS_GPLR_SHIFT));
-
-	__raw_writel(tmp, S5P_CLKDIV_RIGHTBUS);
-
-	do {
-		tmp = __raw_readl(S5P_CLKDIV_STAT_RIGHTBUS);
-	} while (tmp & 0x11);
 }
 
 static void exynos4_set_apll(unsigned int index)
@@ -410,7 +265,7 @@ static int exynos4_target(struct cpufreq_policy *policy,
 			  unsigned int relation)
 {
 	unsigned int index, old_index;
-	unsigned int arm_volt, int_volt;
+	unsigned int arm_volt;
 	int err = -EINVAL;
 
 	freqs.old = exynos4_getspeed(policy->cpu);
@@ -440,7 +295,6 @@ static int exynos4_target(struct cpufreq_policy *policy,
 
 	/* get the voltage value */
 	arm_volt = exynos4_volt_table[index].arm_volt;
-	int_volt = exynos4_volt_table[index].int_volt;
 
 	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 
@@ -448,7 +302,6 @@ static int exynos4_target(struct cpufreq_policy *policy,
 	if (freqs.new > freqs.old) {
 		/* Voltage up */
 		regulator_set_voltage(arm_regulator, arm_volt, arm_volt);
-		regulator_set_voltage(int_regulator, int_volt, int_volt);
 	}
 
 	/* Clock Configuration Procedure */
@@ -458,7 +311,6 @@ static int exynos4_target(struct cpufreq_policy *policy,
 	if (freqs.new < freqs.old) {
 		/* Voltage down */
 		regulator_set_voltage(arm_regulator, arm_volt, arm_volt);
-		regulator_set_voltage(int_regulator, int_volt, int_volt);
 	}
 
 	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
@@ -636,27 +488,6 @@ static int __init exynos4_cpufreq_init(void)
 		goto out;
 	}
 
-	int_regulator = regulator_get(NULL, "vdd_int");
-	if (IS_ERR(int_regulator)) {
-		printk(KERN_ERR "failed to get resource %s\n", "vdd_int");
-		goto out;
-	}
-
-	/*
-	 * Check DRAM type.
-	 * Because DVFS level is different according to DRAM type.
-	 */
-	memtype = __raw_readl(S5P_VA_DMC0 + S5P_DMC0_MEMCON_OFFSET);
-	memtype = (memtype >> S5P_DMC0_MEMTYPE_SHIFT);
-	memtype &= S5P_DMC0_MEMTYPE_MASK;
-
-	if ((memtype < DDR2) && (memtype > DDR3)) {
-		printk(KERN_ERR "%s: wrong memtype= 0x%x\n", __func__, memtype);
-		goto out;
-	} else {
-		printk(KERN_DEBUG "%s: memtype= 0x%x\n", __func__, memtype);
-	}
-
 	register_pm_notifier(&exynos4_cpufreq_nb);
 
 	return cpufreq_register_driver(&exynos4_driver);
@@ -677,9 +508,6 @@ static int __init exynos4_cpufreq_init(void)
 	if (!IS_ERR(arm_regulator))
 		regulator_put(arm_regulator);
 
-	if (!IS_ERR(int_regulator))
-		regulator_put(int_regulator);
-
 	printk(KERN_ERR "%s: failed initialization\n", __func__);
 
 	return -EINVAL;