Commit c8cf6990 authored by Sam Ravnborg's avatar Sam Ravnborg

drm/panel: raydium: Use dev_ based logging

Standardize on the dev_ based logging and drop the include of drm_print.h.
Fix a few cases where "x@" was used when printing the mode.
Signed-off-by: default avatarSam Ravnborg <sam@ravnborg.org>
Reviewed-by: default avatarGuido Günther <agx@sigxcpu.org>
Cc: Robert Chiras <robert.chiras@nxp.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200815125406.1153224-4-sam@ravnborg.org
parent b75efff5
......@@ -19,7 +19,6 @@
#include <drm/drm_crtc.h>
#include <drm/drm_mipi_dsi.h>
#include <drm/drm_panel.h>
#include <drm/drm_print.h>
/* Panel specific color-format bits */
#define COL_FMT_16BPP 0x55
......@@ -329,7 +328,7 @@ static int rad_panel_enable(struct drm_panel *panel)
ret = rad_panel_push_cmd_list(dsi);
if (ret < 0) {
DRM_DEV_ERROR(dev, "Failed to send MCS (%d)\n", ret);
dev_err(dev, "Failed to send MCS (%d)\n", ret);
goto fail;
}
......@@ -341,7 +340,7 @@ static int rad_panel_enable(struct drm_panel *panel)
/* Software reset */
ret = mipi_dsi_dcs_soft_reset(dsi);
if (ret < 0) {
DRM_DEV_ERROR(dev, "Failed to do Software Reset (%d)\n", ret);
dev_err(dev, "Failed to do Software Reset (%d)\n", ret);
goto fail;
}
......@@ -350,33 +349,32 @@ static int rad_panel_enable(struct drm_panel *panel)
/* Set DSI mode */
ret = mipi_dsi_generic_write(dsi, (u8[]){ 0xC2, 0x0B }, 2);
if (ret < 0) {
DRM_DEV_ERROR(dev, "Failed to set DSI mode (%d)\n", ret);
dev_err(dev, "Failed to set DSI mode (%d)\n", ret);
goto fail;
}
/* Set tear ON */
ret = mipi_dsi_dcs_set_tear_on(dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
if (ret < 0) {
DRM_DEV_ERROR(dev, "Failed to set tear ON (%d)\n", ret);
dev_err(dev, "Failed to set tear ON (%d)\n", ret);
goto fail;
}
/* Set tear scanline */
ret = mipi_dsi_dcs_set_tear_scanline(dsi, 0x380);
if (ret < 0) {
DRM_DEV_ERROR(dev, "Failed to set tear scanline (%d)\n", ret);
dev_err(dev, "Failed to set tear scanline (%d)\n", ret);
goto fail;
}
/* Set pixel format */
ret = mipi_dsi_dcs_set_pixel_format(dsi, color_format);
DRM_DEV_DEBUG_DRIVER(dev, "Interface color format set to 0x%x\n",
color_format);
dev_dbg(dev, "Interface color format set to 0x%x\n", color_format);
if (ret < 0) {
DRM_DEV_ERROR(dev, "Failed to set pixel format (%d)\n", ret);
dev_err(dev, "Failed to set pixel format (%d)\n", ret);
goto fail;
}
/* Exit sleep mode */
ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
if (ret < 0) {
DRM_DEV_ERROR(dev, "Failed to exit sleep mode (%d)\n", ret);
dev_err(dev, "Failed to exit sleep mode (%d)\n", ret);
goto fail;
}
......@@ -384,7 +382,7 @@ static int rad_panel_enable(struct drm_panel *panel)
ret = mipi_dsi_dcs_set_display_on(dsi);
if (ret < 0) {
DRM_DEV_ERROR(dev, "Failed to set display ON (%d)\n", ret);
dev_err(dev, "Failed to set display ON (%d)\n", ret);
goto fail;
}
......@@ -418,7 +416,7 @@ static int rad_panel_disable(struct drm_panel *panel)
ret = mipi_dsi_dcs_set_display_off(dsi);
if (ret < 0) {
DRM_DEV_ERROR(dev, "Failed to set display OFF (%d)\n", ret);
dev_err(dev, "Failed to set display OFF (%d)\n", ret);
return ret;
}
......@@ -426,7 +424,7 @@ static int rad_panel_disable(struct drm_panel *panel)
ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
if (ret < 0) {
DRM_DEV_ERROR(dev, "Failed to enter sleep mode (%d)\n", ret);
dev_err(dev, "Failed to enter sleep mode (%d)\n", ret);
return ret;
}
......@@ -442,7 +440,7 @@ static int rad_panel_get_modes(struct drm_panel *panel,
mode = drm_mode_duplicate(connector->dev, &default_mode);
if (!mode) {
DRM_DEV_ERROR(panel->dev, "failed to add mode %ux%ux@%u\n",
dev_err(panel->dev, "failed to add mode %ux%u@%u\n",
default_mode.hdisplay, default_mode.vdisplay,
drm_mode_vrefresh(&default_mode));
return -ENOMEM;
......@@ -626,8 +624,7 @@ static int rad_panel_remove(struct mipi_dsi_device *dsi)
ret = mipi_dsi_detach(dsi);
if (ret)
DRM_DEV_ERROR(dev, "Failed to detach from host (%d)\n",
ret);
dev_err(dev, "Failed to detach from host (%d)\n", ret);
drm_panel_remove(&rad->panel);
......
......@@ -17,7 +17,6 @@
#include <drm/drm_mipi_dsi.h>
#include <drm/drm_modes.h>
#include <drm/drm_panel.h>
#include <drm/drm_print.h>
/*** Manufacturer Command Set ***/
#define MCS_CMD_MODE_SW 0xFE /* CMD Mode Switch */
......@@ -110,8 +109,7 @@ static void rm68200_dcs_write_buf(struct rm68200 *ctx, const void *data,
err = mipi_dsi_dcs_write_buffer(dsi, data, len);
if (err < 0)
DRM_ERROR_RATELIMITED("MIPI DSI DCS write buffer failed: %d\n",
err);
dev_err_ratelimited(ctx->dev, "MIPI DSI DCS write buffer failed: %d\n", err);
}
static void rm68200_dcs_write_cmd(struct rm68200 *ctx, u8 cmd, u8 value)
......@@ -121,7 +119,7 @@ static void rm68200_dcs_write_cmd(struct rm68200 *ctx, u8 cmd, u8 value)
err = mipi_dsi_dcs_write(dsi, cmd, &value, 1);
if (err < 0)
DRM_ERROR_RATELIMITED("MIPI DSI DCS write failed: %d\n", err);
dev_err_ratelimited(ctx->dev, "MIPI DSI DCS write failed: %d\n", err);
}
#define dcs_write_seq(ctx, seq...) \
......@@ -256,11 +254,11 @@ static int rm68200_unprepare(struct drm_panel *panel)
ret = mipi_dsi_dcs_set_display_off(dsi);
if (ret)
DRM_WARN("failed to set display off: %d\n", ret);
dev_warn(panel->dev, "failed to set display off: %d\n", ret);
ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
if (ret)
DRM_WARN("failed to enter sleep mode: %d\n", ret);
dev_warn(panel->dev, "failed to enter sleep mode: %d\n", ret);
msleep(120);
......@@ -287,7 +285,7 @@ static int rm68200_prepare(struct drm_panel *panel)
ret = regulator_enable(ctx->supply);
if (ret < 0) {
DRM_ERROR("failed to enable supply: %d\n", ret);
dev_err(ctx->dev, "failed to enable supply: %d\n", ret);
return ret;
}
......@@ -336,7 +334,7 @@ static int rm68200_get_modes(struct drm_panel *panel,
mode = drm_mode_duplicate(connector->dev, &default_mode);
if (!mode) {
DRM_ERROR("failed to add mode %ux%ux@%u\n",
dev_err(panel->dev, "failed to add mode %ux%u@%u\n",
default_mode.hdisplay, default_mode.vdisplay,
drm_mode_vrefresh(&default_mode));
return -ENOMEM;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment