Commit c9176e10 authored by Sven Peter's avatar Sven Peter Committed by Luiz Augusto von Dentz

dt-bindings: net: Add Broadcom BCM4377 family PCIe Bluetooth

These chips are combined Wi-Fi/Bluetooth radios which expose a
PCI subfunction for the Bluetooth part.
They are found in Apple machines such as the x86 models with the T2
chip or the arm64 models with the M1 or M2 chips.
Signed-off-by: default avatarSven Peter <sven@svenpeter.dev>
Reviewed-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
parent 45564c4e
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/net/bluetooth/brcm,bcm4377-bluetooth.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Broadcom BCM4377 family PCIe Bluetooth Chips
maintainers:
- Sven Peter <sven@svenpeter.dev>
description:
This binding describes Broadcom BCM4377 family PCIe-attached bluetooth chips
usually found in Apple machines. The Wi-Fi part of the chip is described in
bindings/net/wireless/brcm,bcm4329-fmac.yaml.
allOf:
- $ref: bluetooth-controller.yaml#
properties:
compatible:
enum:
- pci14e4,5fa0 # BCM4377
- pci14e4,5f69 # BCM4378
- pci14e4,5f71 # BCM4387
reg:
maxItems: 1
brcm,board-type:
$ref: /schemas/types.yaml#/definitions/string
description: Board type of the Bluetooth chip. This is used to decouple
the overall system board from the Bluetooth module and used to construct
firmware and calibration data filenames.
On Apple platforms, this should be the Apple module-instance codename
prefixed by "apple,", e.g. "apple,atlantisb".
pattern: '^apple,.*'
brcm,taurus-cal-blob:
$ref: /schemas/types.yaml#/definitions/uint8-array
description: A per-device calibration blob for the Bluetooth radio. This
should be filled in by the bootloader from platform configuration
data, if necessary, and will be uploaded to the device.
This blob is used if the chip stepping of the Bluetooth module does not
support beamforming.
brcm,taurus-bf-cal-blob:
$ref: /schemas/types.yaml#/definitions/uint8-array
description: A per-device calibration blob for the Bluetooth radio. This
should be filled in by the bootloader from platform configuration
data, if necessary, and will be uploaded to the device.
This blob is used if the chip stepping of the Bluetooth module supports
beamforming.
local-bd-address: true
required:
- compatible
- reg
- local-bd-address
- brcm,board-type
additionalProperties: false
examples:
- |
pcie@a0000000 {
#address-cells = <3>;
#size-cells = <2>;
reg = <0xa0000000 0x1000000>;
device_type = "pci";
ranges = <0x43000000 0x6 0xa0000000 0xa0000000 0x0 0x20000000>;
bluetooth@0,1 {
compatible = "pci14e4,5f69";
reg = <0x100 0x0 0x0 0x0 0x0>;
brcm,board-type = "apple,honshu";
/* To be filled by the bootloader */
local-bd-address = [00 00 00 00 00 00];
};
};
...@@ -1903,6 +1903,7 @@ F: Documentation/devicetree/bindings/interrupt-controller/apple,* ...@@ -1903,6 +1903,7 @@ F: Documentation/devicetree/bindings/interrupt-controller/apple,*
F: Documentation/devicetree/bindings/iommu/apple,dart.yaml F: Documentation/devicetree/bindings/iommu/apple,dart.yaml
F: Documentation/devicetree/bindings/iommu/apple,sart.yaml F: Documentation/devicetree/bindings/iommu/apple,sart.yaml
F: Documentation/devicetree/bindings/mailbox/apple,mailbox.yaml F: Documentation/devicetree/bindings/mailbox/apple,mailbox.yaml
F: Documentation/devicetree/bindings/net/bluetooth/brcm,bcm4377-bluetooth.yaml
F: Documentation/devicetree/bindings/nvme/apple,nvme-ans.yaml F: Documentation/devicetree/bindings/nvme/apple,nvme-ans.yaml
F: Documentation/devicetree/bindings/nvmem/apple,efuses.yaml F: Documentation/devicetree/bindings/nvmem/apple,efuses.yaml
F: Documentation/devicetree/bindings/pci/apple,pcie.yaml F: Documentation/devicetree/bindings/pci/apple,pcie.yaml
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment