Commit c9b37458 authored by Liu Junliang's avatar Liu Junliang Committed by David S. Miller

USB2NET : SR9700 : One chip USB 1.1 USB2NET SR9700Device Driver Support

Signed-off-by: default avatarLiu Junliang <liujunliang_ljl@163.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent a77dcb8c
...@@ -268,6 +268,14 @@ config USB_NET_DM9601 ...@@ -268,6 +268,14 @@ config USB_NET_DM9601
This option adds support for Davicom DM9601 based USB 1.1 This option adds support for Davicom DM9601 based USB 1.1
10/100 Ethernet adapters. 10/100 Ethernet adapters.
config USB_NET_SR9700
tristate "CoreChip-sz SR9700 based USB 1.1 10/100 ethernet devices"
depends on USB_USBNET
select CRC32
help
This option adds support for CoreChip-sz SR9700 based USB 1.1
10/100 Ethernet adapters.
config USB_NET_SMSC75XX config USB_NET_SMSC75XX
tristate "SMSC LAN75XX based USB 2.0 gigabit ethernet devices" tristate "SMSC LAN75XX based USB 2.0 gigabit ethernet devices"
depends on USB_USBNET depends on USB_USBNET
......
...@@ -14,6 +14,7 @@ obj-$(CONFIG_USB_NET_AX88179_178A) += ax88179_178a.o ...@@ -14,6 +14,7 @@ obj-$(CONFIG_USB_NET_AX88179_178A) += ax88179_178a.o
obj-$(CONFIG_USB_NET_CDCETHER) += cdc_ether.o r815x.o obj-$(CONFIG_USB_NET_CDCETHER) += cdc_ether.o r815x.o
obj-$(CONFIG_USB_NET_CDC_EEM) += cdc_eem.o obj-$(CONFIG_USB_NET_CDC_EEM) += cdc_eem.o
obj-$(CONFIG_USB_NET_DM9601) += dm9601.o obj-$(CONFIG_USB_NET_DM9601) += dm9601.o
obj-$(CONFIG_USB_NET_SR9700) += sr9700.o
obj-$(CONFIG_USB_NET_SMSC75XX) += smsc75xx.o obj-$(CONFIG_USB_NET_SMSC75XX) += smsc75xx.o
obj-$(CONFIG_USB_NET_SMSC95XX) += smsc95xx.o obj-$(CONFIG_USB_NET_SMSC95XX) += smsc95xx.o
obj-$(CONFIG_USB_NET_GL620A) += gl620a.o obj-$(CONFIG_USB_NET_GL620A) += gl620a.o
......
/*
* CoreChip-sz SR9700 one chip USB 1.1 Ethernet Devices
*
* Author : Liu Junliang <liujunliang_ljl@163.com>
*
* Based on dm9601.c
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/stddef.h>
#include <linux/init.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/ethtool.h>
#include <linux/mii.h>
#include <linux/usb.h>
#include <linux/crc32.h>
#include <linux/usb/usbnet.h>
#include "sr9700.h"
static int sr_read(struct usbnet *dev, u8 reg, u16 length, void *data)
{
int err;
err = usbnet_read_cmd(dev, SR_RD_REGS, SR_REQ_RD_REG, 0, reg, data,
length);
if ((err != length) && (err >= 0))
err = -EINVAL;
return err;
}
static int sr_write(struct usbnet *dev, u8 reg, u16 length, void *data)
{
int err;
err = usbnet_write_cmd(dev, SR_WR_REGS, SR_REQ_WR_REG, 0, reg, data,
length);
if ((err >= 0) && (err < length))
err = -EINVAL;
return err;
}
static int sr_read_reg(struct usbnet *dev, u8 reg, u8 *value)
{
return sr_read(dev, reg, 1, value);
}
static int sr_write_reg(struct usbnet *dev, u8 reg, u8 value)
{
return usbnet_write_cmd(dev, SR_WR_REGS, SR_REQ_WR_REG,
value, reg, NULL, 0);
}
static void sr_write_async(struct usbnet *dev, u8 reg, u16 length, void *data)
{
usbnet_write_cmd_async(dev, SR_WR_REGS, SR_REQ_WR_REG,
0, reg, data, length);
}
static void sr_write_reg_async(struct usbnet *dev, u8 reg, u8 value)
{
usbnet_write_cmd_async(dev, SR_WR_REGS, SR_REQ_WR_REG,
value, reg, NULL, 0);
}
static int wait_phy_eeprom_ready(struct usbnet *dev, int phy)
{
int i;
for (i = 0; i < SR_SHARE_TIMEOUT; i++) {
u8 tmp = 0;
int ret;
udelay(1);
ret = sr_read_reg(dev, EPCR, &tmp);
if (ret < 0)
return ret;
/* ready */
if (!(tmp & EPCR_ERRE))
return 0;
}
netdev_err(dev->net, "%s write timed out!\n", phy ? "phy" : "eeprom");
return -EIO;
}
static int sr_share_read_word(struct usbnet *dev, int phy, u8 reg,
__le16 *value)
{
int ret;
mutex_lock(&dev->phy_mutex);
sr_write_reg(dev, EPAR, phy ? (reg | EPAR_PHY_ADR) : reg);
sr_write_reg(dev, EPCR, phy ? (EPCR_EPOS | EPCR_ERPRR) : EPCR_ERPRR);
ret = wait_phy_eeprom_ready(dev, phy);
if (ret < 0)
goto out_unlock;
sr_write_reg(dev, EPCR, 0x0);
ret = sr_read(dev, EPDR, 2, value);
netdev_dbg(dev->net, "read shared %d 0x%02x returned 0x%04x, %d\n",
phy, reg, *value, ret);
out_unlock:
mutex_unlock(&dev->phy_mutex);
return ret;
}
static int sr_share_write_word(struct usbnet *dev, int phy, u8 reg,
__le16 value)
{
int ret;
mutex_lock(&dev->phy_mutex);
ret = sr_write(dev, EPDR, 2, &value);
if (ret < 0)
goto out_unlock;
sr_write_reg(dev, EPAR, phy ? (reg | EPAR_PHY_ADR) : reg);
sr_write_reg(dev, EPCR, phy ? (EPCR_WEP | EPCR_EPOS | EPCR_ERPRW) :
(EPCR_WEP | EPCR_ERPRW));
ret = wait_phy_eeprom_ready(dev, phy);
if (ret < 0)
goto out_unlock;
sr_write_reg(dev, EPCR, 0x0);
out_unlock:
mutex_unlock(&dev->phy_mutex);
return ret;
}
static int sr_read_eeprom_word(struct usbnet *dev, u8 offset, void *value)
{
return sr_share_read_word(dev, 0, offset, value);
}
static int sr9700_get_eeprom_len(struct net_device *netdev)
{
return SR_EEPROM_LEN;
}
static int sr9700_get_eeprom(struct net_device *netdev,
struct ethtool_eeprom *eeprom, u8 *data)
{
struct usbnet *dev = netdev_priv(netdev);
__le16 *buf = (__le16 *)data;
int ret = 0;
int i;
/* access is 16bit */
if ((eeprom->offset & 0x01) || (eeprom->len & 0x01))
return -EINVAL;
for (i = 0; i < eeprom->len / 2; i++) {
ret = sr_read_eeprom_word(dev, eeprom->offset / 2 + i, buf + i);
if (ret < 0)
break;
}
return ret;
}
static int sr_mdio_read(struct net_device *netdev, int phy_id, int loc)
{
struct usbnet *dev = netdev_priv(netdev);
__le16 res;
int rc = 0;
if (phy_id) {
netdev_dbg(netdev, "Only internal phy supported\n");
return 0;
}
/* Access NSR_LINKST bit for link status instead of MII_BMSR */
if (loc == MII_BMSR) {
u8 value;
sr_read_reg(dev, NSR, &value);
if (value & NSR_LINKST)
rc = 1;
}
sr_share_read_word(dev, 1, loc, &res);
if (rc == 1)
res = le16_to_cpu(res) | BMSR_LSTATUS;
else
res = le16_to_cpu(res) & ~BMSR_LSTATUS;
netdev_dbg(netdev, "sr_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n",
phy_id, loc, res);
return res;
}
static void sr_mdio_write(struct net_device *netdev, int phy_id, int loc,
int val)
{
struct usbnet *dev = netdev_priv(netdev);
__le16 res = cpu_to_le16(val);
if (phy_id) {
netdev_dbg(netdev, "Only internal phy supported\n");
return;
}
netdev_dbg(netdev, "sr_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n",
phy_id, loc, val);
sr_share_write_word(dev, 1, loc, res);
}
static u32 sr9700_get_link(struct net_device *netdev)
{
struct usbnet *dev = netdev_priv(netdev);
u8 value = 0;
int rc = 0;
/* Get the Link Status directly */
sr_read_reg(dev, NSR, &value);
if (value & NSR_LINKST)
rc = 1;
return rc;
}
static int sr9700_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
{
struct usbnet *dev = netdev_priv(netdev);
return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
}
static const struct ethtool_ops sr9700_ethtool_ops = {
.get_drvinfo = usbnet_get_drvinfo,
.get_link = sr9700_get_link,
.get_msglevel = usbnet_get_msglevel,
.set_msglevel = usbnet_set_msglevel,
.get_eeprom_len = sr9700_get_eeprom_len,
.get_eeprom = sr9700_get_eeprom,
.get_settings = usbnet_get_settings,
.set_settings = usbnet_set_settings,
.nway_reset = usbnet_nway_reset,
};
static void sr9700_set_multicast(struct net_device *netdev)
{
struct usbnet *dev = netdev_priv(netdev);
/* We use the 20 byte dev->data for our 8 byte filter buffer
* to avoid allocating memory that is tricky to free later
*/
u8 *hashes = (u8 *)&dev->data;
/* rx_ctl setting : enable, disable_long, disable_crc */
u8 rx_ctl = RCR_RXEN | RCR_DIS_CRC | RCR_DIS_LONG;
memset(hashes, 0x00, SR_MCAST_SIZE);
/* broadcast address */
hashes[SR_MCAST_SIZE - 1] |= SR_MCAST_ADDR_FLAG;
if (netdev->flags & IFF_PROMISC) {
rx_ctl |= RCR_PRMSC;
} else if (netdev->flags & IFF_ALLMULTI ||
netdev_mc_count(netdev) > SR_MCAST_MAX) {
rx_ctl |= RCR_RUNT;
} else if (!netdev_mc_empty(netdev)) {
struct netdev_hw_addr *ha;
netdev_for_each_mc_addr(ha, netdev) {
u32 crc = ether_crc(ETH_ALEN, ha->addr) >> 26;
hashes[crc >> 3] |= 1 << (crc & 0x7);
}
}
sr_write_async(dev, MAR, SR_MCAST_SIZE, hashes);
sr_write_reg_async(dev, RCR, rx_ctl);
}
static int sr9700_set_mac_address(struct net_device *netdev, void *p)
{
struct usbnet *dev = netdev_priv(netdev);
struct sockaddr *addr = p;
if (!is_valid_ether_addr(addr->sa_data)) {
netdev_err(netdev, "not setting invalid mac address %pM\n",
addr->sa_data);
return -EINVAL;
}
memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
sr_write_async(dev, PAR, 6, netdev->dev_addr);
return 0;
}
static const struct net_device_ops sr9700_netdev_ops = {
.ndo_open = usbnet_open,
.ndo_stop = usbnet_stop,
.ndo_start_xmit = usbnet_start_xmit,
.ndo_tx_timeout = usbnet_tx_timeout,
.ndo_change_mtu = usbnet_change_mtu,
.ndo_validate_addr = eth_validate_addr,
.ndo_do_ioctl = sr9700_ioctl,
.ndo_set_rx_mode = sr9700_set_multicast,
.ndo_set_mac_address = sr9700_set_mac_address,
};
static int sr9700_bind(struct usbnet *dev, struct usb_interface *intf)
{
struct net_device *netdev;
struct mii_if_info *mii;
int ret;
ret = usbnet_get_endpoints(dev, intf);
if (ret)
goto out;
netdev = dev->net;
netdev->netdev_ops = &sr9700_netdev_ops;
netdev->ethtool_ops = &sr9700_ethtool_ops;
netdev->hard_header_len += SR_TX_OVERHEAD;
dev->hard_mtu = netdev->mtu + netdev->hard_header_len;
/* bulkin buffer is preferably not less than 3K */
dev->rx_urb_size = 3072;
mii = &dev->mii;
mii->dev = netdev;
mii->mdio_read = sr_mdio_read;
mii->mdio_write = sr_mdio_write;
mii->phy_id_mask = 0x1f;
mii->reg_num_mask = 0x1f;
sr_write_reg(dev, NCR, NCR_RST);
udelay(20);
/* read MAC
* After Chip Power on, the Chip will reload the MAC from
* EEPROM automatically to PAR. In case there is no EEPROM externally,
* a default MAC address is stored in PAR for making chip work properly.
*/
if (sr_read(dev, PAR, ETH_ALEN, netdev->dev_addr) < 0) {
netdev_err(netdev, "Error reading MAC address\n");
ret = -ENODEV;
goto out;
}
/* power up and reset phy */
sr_write_reg(dev, PRR, PRR_PHY_RST);
/* at least 10ms, here 20ms for safe */
mdelay(20);
sr_write_reg(dev, PRR, 0);
/* at least 1ms, here 2ms for reading right register */
udelay(2 * 1000);
/* receive broadcast packets */
sr9700_set_multicast(netdev);
sr_mdio_write(netdev, mii->phy_id, MII_BMCR, BMCR_RESET);
sr_mdio_write(netdev, mii->phy_id, MII_ADVERTISE, ADVERTISE_ALL |
ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
mii_nway_restart(mii);
out:
return ret;
}
static int sr9700_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
{
struct sk_buff *sr_skb;
int len;
/* skb content (packets) format :
* p0 p1 p2 ...... pm
* / \
* / \
* / \
* / \
* p0b0 p0b1 p0b2 p0b3 ...... p0b(n-4) p0b(n-3)...p0bn
*
* p0 : packet 0
* p0b0 : packet 0 byte 0
*
* b0: rx status
* b1: packet length (incl crc) low
* b2: packet length (incl crc) high
* b3..n-4: packet data
* bn-3..bn: ethernet packet crc
*/
if (unlikely(skb->len < SR_RX_OVERHEAD)) {
netdev_err(dev->net, "unexpected tiny rx frame\n");
return 0;
}
/* one skb may contains multiple packets */
while (skb->len > SR_RX_OVERHEAD) {
if (skb->data[0] != 0x40)
return 0;
/* ignore the CRC length */
len = (skb->data[1] | (skb->data[2] << 8)) - 4;
if (len > ETH_FRAME_LEN)
return 0;
/* the last packet of current skb */
if (skb->len == (len + SR_RX_OVERHEAD)) {
skb_pull(skb, 3);
skb->len = len;
skb_set_tail_pointer(skb, len);
skb->truesize = len + sizeof(struct sk_buff);
return 2;
}
/* skb_clone is used for address align */
sr_skb = skb_clone(skb, GFP_ATOMIC);
if (!sr_skb)
return 0;
sr_skb->len = len;
sr_skb->data = skb->data + 3;
skb_set_tail_pointer(sr_skb, len);
sr_skb->truesize = len + sizeof(struct sk_buff);
usbnet_skb_return(dev, sr_skb);
skb_pull(skb, len + SR_RX_OVERHEAD);
};
return 0;
}
static struct sk_buff *sr9700_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
gfp_t flags)
{
int len;
/* SR9700 can only send out one ethernet packet at once.
*
* b0 b1 b2 b3 ...... b(n-4) b(n-3)...bn
*
* b0: rx status
* b1: packet length (incl crc) low
* b2: packet length (incl crc) high
* b3..n-4: packet data
* bn-3..bn: ethernet packet crc
*/
len = skb->len;
if (skb_headroom(skb) < SR_TX_OVERHEAD) {
struct sk_buff *skb2;
skb2 = skb_copy_expand(skb, SR_TX_OVERHEAD, 0, flags);
dev_kfree_skb_any(skb);
skb = skb2;
if (!skb)
return NULL;
}
__skb_push(skb, SR_TX_OVERHEAD);
/* usbnet adds padding if length is a multiple of packet size
* if so, adjust length value in header
*/
if ((skb->len % dev->maxpacket) == 0)
len++;
skb->data[0] = len;
skb->data[1] = len >> 8;
return skb;
}
static void sr9700_status(struct usbnet *dev, struct urb *urb)
{
int link;
u8 *buf;
/* format:
b0: net status
b1: tx status 1
b2: tx status 2
b3: rx status
b4: rx overflow
b5: rx count
b6: tx count
b7: gpr
*/
if (urb->actual_length < 8)
return;
buf = urb->transfer_buffer;
link = !!(buf[0] & 0x40);
if (netif_carrier_ok(dev->net) != link) {
usbnet_link_change(dev, link, 1);
netdev_dbg(dev->net, "Link Status is: %d\n", link);
}
}
static int sr9700_link_reset(struct usbnet *dev)
{
struct ethtool_cmd ecmd;
mii_check_media(&dev->mii, 1, 1);
mii_ethtool_gset(&dev->mii, &ecmd);
netdev_dbg(dev->net, "link_reset() speed: %d duplex: %d\n",
ecmd.speed, ecmd.duplex);
return 0;
}
static const struct driver_info sr9700_driver_info = {
.description = "CoreChip SR9700 USB Ethernet",
.flags = FLAG_ETHER,
.bind = sr9700_bind,
.rx_fixup = sr9700_rx_fixup,
.tx_fixup = sr9700_tx_fixup,
.status = sr9700_status,
.link_reset = sr9700_link_reset,
.reset = sr9700_link_reset,
};
static const struct usb_device_id products[] = {
{
USB_DEVICE(0x0fe6, 0x9700), /* SR9700 device */
.driver_info = (unsigned long)&sr9700_driver_info,
},
{}, /* END */
};
MODULE_DEVICE_TABLE(usb, products);
static struct usb_driver sr9700_usb_driver = {
.name = "sr9700",
.id_table = products,
.probe = usbnet_probe,
.disconnect = usbnet_disconnect,
.suspend = usbnet_suspend,
.resume = usbnet_resume,
.disable_hub_initiated_lpm = 1,
};
module_usb_driver(sr9700_usb_driver);
MODULE_AUTHOR("liujl <liujunliang_ljl@163.com>");
MODULE_DESCRIPTION("SR9700 one chip USB 1.1 USB to Ethernet device from http://www.corechip-sz.com/");
MODULE_LICENSE("GPL");
/*
* CoreChip-sz SR9700 one chip USB 1.1 Ethernet Devices
*
* Author : Liu Junliang <liujunliang_ljl@163.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*/
#ifndef _SR9700_H
#define _SR9700_H
/* sr9700 spec. register table on Linux platform */
/* Network Control Reg */
#define NCR 0x00
#define NCR_RST (1 << 0)
#define NCR_LBK (3 << 1)
#define NCR_FDX (1 << 3)
#define NCR_WAKEEN (1 << 6)
/* Network Status Reg */
#define NSR 0x01
#define NSR_RXRDY (1 << 0)
#define NSR_RXOV (1 << 1)
#define NSR_TX1END (1 << 2)
#define NSR_TX2END (1 << 3)
#define NSR_TXFULL (1 << 4)
#define NSR_WAKEST (1 << 5)
#define NSR_LINKST (1 << 6)
#define NSR_SPEED (1 << 7)
/* Tx Control Reg */
#define TCR 0x02
#define TCR_CRC_DIS (1 << 1)
#define TCR_PAD_DIS (1 << 2)
#define TCR_LC_CARE (1 << 3)
#define TCR_CRS_CARE (1 << 4)
#define TCR_EXCECM (1 << 5)
#define TCR_LF_EN (1 << 6)
/* Tx Status Reg for Packet Index 1 */
#define TSR1 0x03
#define TSR1_EC (1 << 2)
#define TSR1_COL (1 << 3)
#define TSR1_LC (1 << 4)
#define TSR1_NC (1 << 5)
#define TSR1_LOC (1 << 6)
#define TSR1_TLF (1 << 7)
/* Tx Status Reg for Packet Index 2 */
#define TSR2 0x04
#define TSR2_EC (1 << 2)
#define TSR2_COL (1 << 3)
#define TSR2_LC (1 << 4)
#define TSR2_NC (1 << 5)
#define TSR2_LOC (1 << 6)
#define TSR2_TLF (1 << 7)
/* Rx Control Reg*/
#define RCR 0x05
#define RCR_RXEN (1 << 0)
#define RCR_PRMSC (1 << 1)
#define RCR_RUNT (1 << 2)
#define RCR_ALL (1 << 3)
#define RCR_DIS_CRC (1 << 4)
#define RCR_DIS_LONG (1 << 5)
/* Rx Status Reg */
#define RSR 0x06
#define RSR_AE (1 << 2)
#define RSR_MF (1 << 6)
#define RSR_RF (1 << 7)
/* Rx Overflow Counter Reg */
#define ROCR 0x07
#define ROCR_ROC (0x7F << 0)
#define ROCR_RXFU (1 << 7)
/* Back Pressure Threshold Reg */
#define BPTR 0x08
#define BPTR_JPT (0x0F << 0)
#define BPTR_BPHW (0x0F << 4)
/* Flow Control Threshold Reg */
#define FCTR 0x09
#define FCTR_LWOT (0x0F << 0)
#define FCTR_HWOT (0x0F << 4)
/* rx/tx Flow Control Reg */
#define FCR 0x0A
#define FCR_FLCE (1 << 0)
#define FCR_BKPA (1 << 4)
#define FCR_TXPEN (1 << 5)
#define FCR_TXPF (1 << 6)
#define FCR_TXP0 (1 << 7)
/* Eeprom & Phy Control Reg */
#define EPCR 0x0B
#define EPCR_ERRE (1 << 0)
#define EPCR_ERPRW (1 << 1)
#define EPCR_ERPRR (1 << 2)
#define EPCR_EPOS (1 << 3)
#define EPCR_WEP (1 << 4)
/* Eeprom & Phy Address Reg */
#define EPAR 0x0C
#define EPAR_EROA (0x3F << 0)
#define EPAR_PHY_ADR_MASK (0x03 << 6)
#define EPAR_PHY_ADR (0x01 << 6)
/* Eeprom & Phy Data Reg */
#define EPDR 0x0D /* 0x0D ~ 0x0E for Data Reg Low & High */
/* Wakeup Control Reg */
#define WCR 0x0F
#define WCR_MAGICST (1 << 0)
#define WCR_LINKST (1 << 2)
#define WCR_MAGICEN (1 << 3)
#define WCR_LINKEN (1 << 5)
/* Physical Address Reg */
#define PAR 0x10 /* 0x10 ~ 0x15 6 bytes for PAR */
/* Multicast Address Reg */
#define MAR 0x16 /* 0x16 ~ 0x1D 8 bytes for MAR */
/* 0x1e unused */
/* Phy Reset Reg */
#define PRR 0x1F
#define PRR_PHY_RST (1 << 0)
/* Tx sdram Write Pointer Address Low */
#define TWPAL 0x20
/* Tx sdram Write Pointer Address High */
#define TWPAH 0x21
/* Tx sdram Read Pointer Address Low */
#define TRPAL 0x22
/* Tx sdram Read Pointer Address High */
#define TRPAH 0x23
/* Rx sdram Write Pointer Address Low */
#define RWPAL 0x24
/* Rx sdram Write Pointer Address High */
#define RWPAH 0x25
/* Rx sdram Read Pointer Address Low */
#define RRPAL 0x26
/* Rx sdram Read Pointer Address High */
#define RRPAH 0x27
/* Vendor ID register */
#define VID 0x28 /* 0x28 ~ 0x29 2 bytes for VID */
/* Product ID register */
#define PID 0x2A /* 0x2A ~ 0x2B 2 bytes for PID */
/* CHIP Revision register */
#define CHIPR 0x2C
/* 0x2D --> 0xEF unused */
/* USB Device Address */
#define USBDA 0xF0
#define USBDA_USBFA (0x7F << 0)
/* RX packet Counter Reg */
#define RXC 0xF1
/* Tx packet Counter & USB Status Reg */
#define TXC_USBS 0xF2
#define TXC_USBS_TXC0 (1 << 0)
#define TXC_USBS_TXC1 (1 << 1)
#define TXC_USBS_TXC2 (1 << 2)
#define TXC_USBS_EP1RDY (1 << 5)
#define TXC_USBS_SUSFLAG (1 << 6)
#define TXC_USBS_RXFAULT (1 << 7)
/* USB Control register */
#define USBC 0xF4
#define USBC_EP3NAK (1 << 4)
#define USBC_EP3ACK (1 << 5)
/* Register access commands and flags */
#define SR_RD_REGS 0x00
#define SR_WR_REGS 0x01
#define SR_WR_REG 0x03
#define SR_REQ_RD_REG (USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE)
#define SR_REQ_WR_REG (USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE)
/* parameters */
#define SR_SHARE_TIMEOUT 1000
#define SR_EEPROM_LEN 256
#define SR_MCAST_SIZE 8
#define SR_MCAST_ADDR_FLAG 0x80
#define SR_MCAST_MAX 64
#define SR_TX_OVERHEAD 2 /* 2bytes header */
#define SR_RX_OVERHEAD 7 /* 3bytes header + 4crc tail */
#endif /* _SR9700_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment