rt2x00: Cleanup indirect register access

All code which accessed indirect registers was similar
in respect to the for-loop, the given timeout, etc.
Move it into a seperate function, which for PCI drivers
can be moved into rt2x00pci.

This allows us to cleanup the cleanup the code further
by removing the goto statementsand making the codepath
look a bit nicer.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/rt2x00/rt2400pci.c

@@ -49,20 +49,10 @@
  * the access attempt is considered to have failed,
  * and we will print an error.
  */
-static u32 rt2400pci_bbp_check(struct rt2x00_dev *rt2x00dev)
-{
-	u32 reg;
-	unsigned int i;
-
-	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-		rt2x00pci_register_read(rt2x00dev, BBPCSR, &reg);
-		if (!rt2x00_get_field32(reg, BBPCSR_BUSY))
-			break;
-		udelay(REGISTER_BUSY_DELAY);
-	}
-
-	return reg;
-}
+#define WAIT_FOR_BBP(__dev, __reg) \
+	rt2x00pci_regbusy_read((__dev), BBPCSR, BBPCSR_BUSY, (__reg))
+#define WAIT_FOR_RF(__dev, __reg) \
+	rt2x00pci_regbusy_read((__dev), RFCSR, RFCSR_BUSY, (__reg))
 
 static void rt2400pci_bbp_write(struct rt2x00_dev *rt2x00dev,
 				const unsigned int word, const u8 value)
@@ -72,15 +62,10 @@ static void rt2400pci_bbp_write(struct rt2x00_dev *rt2x00dev,
 	mutex_lock(&rt2x00dev->csr_mutex);
 
 	/*
-	 * Wait until the BBP becomes ready.
-	 */
-	reg = rt2400pci_bbp_check(rt2x00dev);
-	if (rt2x00_get_field32(reg, BBPCSR_BUSY))
-		goto exit_fail;
-
-	/*
-	 * Write the data into the BBP.
+	 * Wait until the BBP becomes available, afterwards we
+	 * can safely write the new data into the register.
 	 */
+	if (WAIT_FOR_BBP(rt2x00dev, &reg)) {
 		reg = 0;
 		rt2x00_set_field32(&reg, BBPCSR_VALUE, value);
 		rt2x00_set_field32(&reg, BBPCSR_REGNUM, word);
@@ -88,15 +73,9 @@ static void rt2400pci_bbp_write(struct rt2x00_dev *rt2x00dev,
 		rt2x00_set_field32(&reg, BBPCSR_WRITE_CONTROL, 1);
 
 		rt2x00pci_register_write(rt2x00dev, BBPCSR, reg);
+	}
 
 	mutex_unlock(&rt2x00dev->csr_mutex);
-
-	return;
-
-exit_fail:
-	mutex_unlock(&rt2x00dev->csr_mutex);
-
-	ERROR(rt2x00dev, "BBPCSR register busy. Write failed.\n");
 }
 
 static void rt2400pci_bbp_read(struct rt2x00_dev *rt2x00dev,
@@ -107,15 +86,14 @@ static void rt2400pci_bbp_read(struct rt2x00_dev *rt2x00dev,
 	mutex_lock(&rt2x00dev->csr_mutex);
 
 	/*
-	 * Wait until the BBP becomes ready.
-	 */
-	reg = rt2400pci_bbp_check(rt2x00dev);
-	if (rt2x00_get_field32(reg, BBPCSR_BUSY))
-		goto exit_fail;
-
-	/*
-	 * Write the request into the BBP.
-	 */
+	 * Wait until the BBP becomes available, afterwards we
+	 * can safely write the read request into the register.
+	 * After the data has been written, we wait until hardware
+	 * returns the correct value, if at any time the register
+	 * doesn't become available in time, reg will be 0xffffffff
+	 * which means we return 0xff to the caller.
+	 */
+	if (WAIT_FOR_BBP(rt2x00dev, &reg)) {
 		reg = 0;
 		rt2x00_set_field32(&reg, BBPCSR_REGNUM, word);
 		rt2x00_set_field32(&reg, BBPCSR_BUSY, 1);
@@ -123,49 +101,29 @@ static void rt2400pci_bbp_read(struct rt2x00_dev *rt2x00dev,
 
 		rt2x00pci_register_write(rt2x00dev, BBPCSR, reg);
 
-	/*
-	 * Wait until the BBP becomes ready.
-	 */
-	reg = rt2400pci_bbp_check(rt2x00dev);
-	if (rt2x00_get_field32(reg, BBPCSR_BUSY))
-		goto exit_fail;
+		WAIT_FOR_BBP(rt2x00dev, &reg);
+	}
 
 	*value = rt2x00_get_field32(reg, BBPCSR_VALUE);
 
 	mutex_unlock(&rt2x00dev->csr_mutex);
-
-	return;
-
-exit_fail:
-	mutex_unlock(&rt2x00dev->csr_mutex);
-
-	ERROR(rt2x00dev, "BBPCSR register busy. Read failed.\n");
-	*value = 0xff;
 }
 
 static void rt2400pci_rf_write(struct rt2x00_dev *rt2x00dev,
 			       const unsigned int word, const u32 value)
 {
 	u32 reg;
-	unsigned int i;
 
 	if (!word)
 		return;
 
 	mutex_lock(&rt2x00dev->csr_mutex);
 
-	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-		rt2x00pci_register_read(rt2x00dev, RFCSR, &reg);
-		if (!rt2x00_get_field32(reg, RFCSR_BUSY))
-			goto rf_write;
-		udelay(REGISTER_BUSY_DELAY);
-	}
-
-	mutex_unlock(&rt2x00dev->csr_mutex);
-	ERROR(rt2x00dev, "RFCSR register busy. Write failed.\n");
-	return;
-
-rf_write:
+	/*
+	 * Wait until the RF becomes available, afterwards we
+	 * can safely write the new data into the register.
+	 */
+	if (WAIT_FOR_RF(rt2x00dev, &reg)) {
 		reg = 0;
 		rt2x00_set_field32(&reg, RFCSR_VALUE, value);
 		rt2x00_set_field32(&reg, RFCSR_NUMBER_OF_BITS, 20);
@@ -174,6 +132,7 @@ static void rt2400pci_rf_write(struct rt2x00_dev *rt2x00dev,
 
 		rt2x00pci_register_write(rt2x00dev, RFCSR, reg);
 		rt2x00_rf_write(rt2x00dev, word, value);
+	}
 
 	mutex_unlock(&rt2x00dev->csr_mutex);
 }

drivers/net/wireless/rt2x00/rt2500pci.c

@@ -49,20 +49,10 @@
  * the access attempt is considered to have failed,
  * and we will print an error.
  */
-static u32 rt2500pci_bbp_check(struct rt2x00_dev *rt2x00dev)
-{
-	u32 reg;
-	unsigned int i;
-
-	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-		rt2x00pci_register_read(rt2x00dev, BBPCSR, &reg);
-		if (!rt2x00_get_field32(reg, BBPCSR_BUSY))
-			break;
-		udelay(REGISTER_BUSY_DELAY);
-	}
-
-	return reg;
-}
+#define WAIT_FOR_BBP(__dev, __reg) \
+	rt2x00pci_regbusy_read((__dev), BBPCSR, BBPCSR_BUSY, (__reg))
+#define WAIT_FOR_RF(__dev, __reg) \
+	rt2x00pci_regbusy_read((__dev), RFCSR, RFCSR_BUSY, (__reg))
 
 static void rt2500pci_bbp_write(struct rt2x00_dev *rt2x00dev,
 				const unsigned int word, const u8 value)
@@ -72,15 +62,10 @@ static void rt2500pci_bbp_write(struct rt2x00_dev *rt2x00dev,
 	mutex_lock(&rt2x00dev->csr_mutex);
 
 	/*
-	 * Wait until the BBP becomes ready.
-	 */
-	reg = rt2500pci_bbp_check(rt2x00dev);
-	if (rt2x00_get_field32(reg, BBPCSR_BUSY))
-		goto exit_fail;
-
-	/*
-	 * Write the data into the BBP.
+	 * Wait until the BBP becomes available, afterwards we
+	 * can safely write the new data into the register.
 	 */
+	if (WAIT_FOR_BBP(rt2x00dev, &reg)) {
 		reg = 0;
 		rt2x00_set_field32(&reg, BBPCSR_VALUE, value);
 		rt2x00_set_field32(&reg, BBPCSR_REGNUM, word);
@@ -88,15 +73,9 @@ static void rt2500pci_bbp_write(struct rt2x00_dev *rt2x00dev,
 		rt2x00_set_field32(&reg, BBPCSR_WRITE_CONTROL, 1);
 
 		rt2x00pci_register_write(rt2x00dev, BBPCSR, reg);
+	}
 
 	mutex_unlock(&rt2x00dev->csr_mutex);
-
-	return;
-
-exit_fail:
-	mutex_unlock(&rt2x00dev->csr_mutex);
-
-	ERROR(rt2x00dev, "BBPCSR register busy. Write failed.\n");
 }
 
 static void rt2500pci_bbp_read(struct rt2x00_dev *rt2x00dev,
@@ -107,15 +86,14 @@ static void rt2500pci_bbp_read(struct rt2x00_dev *rt2x00dev,
 	mutex_lock(&rt2x00dev->csr_mutex);
 
 	/*
-	 * Wait until the BBP becomes ready.
-	 */
-	reg = rt2500pci_bbp_check(rt2x00dev);
-	if (rt2x00_get_field32(reg, BBPCSR_BUSY))
-		goto exit_fail;
-
-	/*
-	 * Write the request into the BBP.
+	 * Wait until the BBP becomes available, afterwards we
+	 * can safely write the read request into the register.
+	 * After the data has been written, we wait until hardware
+	 * returns the correct value, if at any time the register
+	 * doesn't become available in time, reg will be 0xffffffff
+	 * which means we return 0xff to the caller.
 	 */
+	if (WAIT_FOR_BBP(rt2x00dev, &reg)) {
 		reg = 0;
 		rt2x00_set_field32(&reg, BBPCSR_REGNUM, word);
 		rt2x00_set_field32(&reg, BBPCSR_BUSY, 1);
@@ -123,49 +101,29 @@ static void rt2500pci_bbp_read(struct rt2x00_dev *rt2x00dev,
 
 		rt2x00pci_register_write(rt2x00dev, BBPCSR, reg);
 
-	/*
-	 * Wait until the BBP becomes ready.
-	 */
-	reg = rt2500pci_bbp_check(rt2x00dev);
-	if (rt2x00_get_field32(reg, BBPCSR_BUSY))
-		goto exit_fail;
+		WAIT_FOR_BBP(rt2x00dev, &reg);
+	}
 
 	*value = rt2x00_get_field32(reg, BBPCSR_VALUE);
 
 	mutex_unlock(&rt2x00dev->csr_mutex);
-
-	return;
-
-exit_fail:
-	mutex_unlock(&rt2x00dev->csr_mutex);
-
-	ERROR(rt2x00dev, "BBPCSR register busy. Read failed.\n");
-	*value = 0xff;
 }
 
 static void rt2500pci_rf_write(struct rt2x00_dev *rt2x00dev,
 			       const unsigned int word, const u32 value)
 {
 	u32 reg;
-	unsigned int i;
 
 	if (!word)
 		return;
 
 	mutex_lock(&rt2x00dev->csr_mutex);
 
-	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-		rt2x00pci_register_read(rt2x00dev, RFCSR, &reg);
-		if (!rt2x00_get_field32(reg, RFCSR_BUSY))
-			goto rf_write;
-		udelay(REGISTER_BUSY_DELAY);
-	}
-
-	mutex_unlock(&rt2x00dev->csr_mutex);
-	ERROR(rt2x00dev, "RFCSR register busy. Write failed.\n");
-	return;
-
-rf_write:
+	/*
+	 * Wait until the RF becomes available, afterwards we
+	 * can safely write the new data into the register.
+	 */
+	if (WAIT_FOR_RF(rt2x00dev, &reg)) {
 		reg = 0;
 		rt2x00_set_field32(&reg, RFCSR_VALUE, value);
 		rt2x00_set_field32(&reg, RFCSR_NUMBER_OF_BITS, 20);
@@ -174,6 +132,7 @@ static void rt2500pci_rf_write(struct rt2x00_dev *rt2x00dev,
 
 		rt2x00pci_register_write(rt2x00dev, RFCSR, reg);
 		rt2x00_rf_write(rt2x00dev, word, value);
+	}
 
 	mutex_unlock(&rt2x00dev->csr_mutex);
 }

drivers/net/wireless/rt2x00/rt2500usb.c

@@ -57,7 +57,7 @@ static inline void rt2500usb_register_read(struct rt2x00_dev *rt2x00dev,
 	__le16 reg;
 	rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ,
 				      USB_VENDOR_REQUEST_IN, offset,
-				      &reg, sizeof(u16), REGISTER_TIMEOUT);
+				      &reg, sizeof(reg), REGISTER_TIMEOUT);
 	*value = le16_to_cpu(reg);
 }
 
@@ -68,7 +68,7 @@ static inline void rt2500usb_register_read_lock(struct rt2x00_dev *rt2x00dev,
 	__le16 reg;
 	rt2x00usb_vendor_req_buff_lock(rt2x00dev, USB_MULTI_READ,
 				       USB_VENDOR_REQUEST_IN, offset,
-				       &reg, sizeof(u16), REGISTER_TIMEOUT);
+				       &reg, sizeof(reg), REGISTER_TIMEOUT);
 	*value = le16_to_cpu(reg);
 }
 
@@ -89,7 +89,7 @@ static inline void rt2500usb_register_write(struct rt2x00_dev *rt2x00dev,
 	__le16 reg = cpu_to_le16(value);
 	rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE,
 				      USB_VENDOR_REQUEST_OUT, offset,
-				      &reg, sizeof(u16), REGISTER_TIMEOUT);
+				      &reg, sizeof(reg), REGISTER_TIMEOUT);
 }
 
 static inline void rt2500usb_register_write_lock(struct rt2x00_dev *rt2x00dev,
@@ -99,7 +99,7 @@ static inline void rt2500usb_register_write_lock(struct rt2x00_dev *rt2x00dev,
 	__le16 reg = cpu_to_le16(value);
 	rt2x00usb_vendor_req_buff_lock(rt2x00dev, USB_MULTI_WRITE,
 				       USB_VENDOR_REQUEST_OUT, offset,
-				       &reg, sizeof(u16), REGISTER_TIMEOUT);
+				       &reg, sizeof(reg), REGISTER_TIMEOUT);
 }
 
 static inline void rt2500usb_register_multiwrite(struct rt2x00_dev *rt2x00dev,
@@ -112,21 +112,32 @@ static inline void rt2500usb_register_multiwrite(struct rt2x00_dev *rt2x00dev,
 				      REGISTER_TIMEOUT16(length));
 }
 
-static u16 rt2500usb_bbp_check(struct rt2x00_dev *rt2x00dev)
+static int rt2500usb_regbusy_read(struct rt2x00_dev *rt2x00dev,
+				  const unsigned int offset,
+				  struct rt2x00_field16 field,
+				  u16 *reg)
 {
-	u16 reg;
 	unsigned int i;
 
 	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-		rt2500usb_register_read_lock(rt2x00dev, PHY_CSR8, &reg);
-		if (!rt2x00_get_field16(reg, PHY_CSR8_BUSY))
-			break;
+		rt2500usb_register_read_lock(rt2x00dev, offset, reg);
+		if (!rt2x00_get_field16(*reg, field))
+			return 1;
 		udelay(REGISTER_BUSY_DELAY);
 	}
 
-	return reg;
+	ERROR(rt2x00dev, "Indirect register access failed: "
+	      "offset=0x%.08x, value=0x%.08x\n", offset, *reg);
+	*reg = ~0;
+
+	return 0;
 }
 
+#define WAIT_FOR_BBP(__dev, __reg) \
+	rt2500usb_regbusy_read((__dev), PHY_CSR8, PHY_CSR8_BUSY, (__reg))
+#define WAIT_FOR_RF(__dev, __reg) \
+	rt2500usb_regbusy_read((__dev), PHY_CSR10, PHY_CSR10_RF_BUSY, (__reg))
+
 static void rt2500usb_bbp_write(struct rt2x00_dev *rt2x00dev,
 				const unsigned int word, const u8 value)
 {
@@ -135,30 +146,19 @@ static void rt2500usb_bbp_write(struct rt2x00_dev *rt2x00dev,
 	mutex_lock(&rt2x00dev->csr_mutex);
 
 	/*
-	 * Wait until the BBP becomes ready.
-	 */
-	reg = rt2500usb_bbp_check(rt2x00dev);
-	if (rt2x00_get_field16(reg, PHY_CSR8_BUSY))
-		goto exit_fail;
-
-	/*
-	 * Write the data into the BBP.
+	 * Wait until the BBP becomes available, afterwards we
+	 * can safely write the new data into the register.
 	 */
+	if (WAIT_FOR_BBP(rt2x00dev, &reg)) {
 		reg = 0;
 		rt2x00_set_field16(&reg, PHY_CSR7_DATA, value);
 		rt2x00_set_field16(&reg, PHY_CSR7_REG_ID, word);
 		rt2x00_set_field16(&reg, PHY_CSR7_READ_CONTROL, 0);
 
 		rt2500usb_register_write_lock(rt2x00dev, PHY_CSR7, reg);
+	}
 
 	mutex_unlock(&rt2x00dev->csr_mutex);
-
-	return;
-
-exit_fail:
-	mutex_unlock(&rt2x00dev->csr_mutex);
-
-	ERROR(rt2x00dev, "PHY_CSR8 register busy. Write failed.\n");
 }
 
 static void rt2500usb_bbp_read(struct rt2x00_dev *rt2x00dev,
@@ -169,65 +169,44 @@ static void rt2500usb_bbp_read(struct rt2x00_dev *rt2x00dev,
 	mutex_lock(&rt2x00dev->csr_mutex);
 
 	/*
-	 * Wait until the BBP becomes ready.
-	 */
-	reg = rt2500usb_bbp_check(rt2x00dev);
-	if (rt2x00_get_field16(reg, PHY_CSR8_BUSY))
-		goto exit_fail;
-
-	/*
-	 * Write the request into the BBP.
-	 */
+	 * Wait until the BBP becomes available, afterwards we
+	 * can safely write the read request into the register.
+	 * After the data has been written, we wait until hardware
+	 * returns the correct value, if at any time the register
+	 * doesn't become available in time, reg will be 0xffffffff
+	 * which means we return 0xff to the caller.
+	 */
+	if (WAIT_FOR_BBP(rt2x00dev, &reg)) {
 		reg = 0;
 		rt2x00_set_field16(&reg, PHY_CSR7_REG_ID, word);
 		rt2x00_set_field16(&reg, PHY_CSR7_READ_CONTROL, 1);
 
 		rt2500usb_register_write_lock(rt2x00dev, PHY_CSR7, reg);
 
-	/*
-	 * Wait until the BBP becomes ready.
-	 */
-	reg = rt2500usb_bbp_check(rt2x00dev);
-	if (rt2x00_get_field16(reg, PHY_CSR8_BUSY))
-		goto exit_fail;
-
+		if (WAIT_FOR_BBP(rt2x00dev, &reg))
 			rt2500usb_register_read_lock(rt2x00dev, PHY_CSR7, &reg);
-	*value = rt2x00_get_field16(reg, PHY_CSR7_DATA);
-
-	mutex_unlock(&rt2x00dev->csr_mutex);
+	}
 
-	return;
+	*value = rt2x00_get_field16(reg, PHY_CSR7_DATA);
 
-exit_fail:
 	mutex_unlock(&rt2x00dev->csr_mutex);
-
-	ERROR(rt2x00dev, "PHY_CSR8 register busy. Read failed.\n");
-	*value = 0xff;
 }
 
 static void rt2500usb_rf_write(struct rt2x00_dev *rt2x00dev,
 			       const unsigned int word, const u32 value)
 {
 	u16 reg;
-	unsigned int i;
 
 	if (!word)
 		return;
 
 	mutex_lock(&rt2x00dev->csr_mutex);
 
-	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-		rt2500usb_register_read_lock(rt2x00dev, PHY_CSR10, &reg);
-		if (!rt2x00_get_field16(reg, PHY_CSR10_RF_BUSY))
-			goto rf_write;
-		udelay(REGISTER_BUSY_DELAY);
-	}
-
-	mutex_unlock(&rt2x00dev->csr_mutex);
-	ERROR(rt2x00dev, "PHY_CSR10 register busy. Write failed.\n");
-	return;
-
-rf_write:
+	/*
+	 * Wait until the RF becomes available, afterwards we
+	 * can safely write the new data into the register.
+	 */
+	if (WAIT_FOR_RF(rt2x00dev, &reg)) {
 		reg = 0;
 		rt2x00_set_field16(&reg, PHY_CSR9_RF_VALUE, value);
 		rt2500usb_register_write_lock(rt2x00dev, PHY_CSR9, reg);
@@ -240,6 +219,7 @@ static void rt2500usb_rf_write(struct rt2x00_dev *rt2x00dev,
 
 		rt2500usb_register_write_lock(rt2x00dev, PHY_CSR10, reg);
 		rt2x00_rf_write(rt2x00dev, word, value);
+	}
 
 	mutex_unlock(&rt2x00dev->csr_mutex);
 }

drivers/net/wireless/rt2x00/rt2x00pci.c

@@ -31,6 +31,31 @@
 #include "rt2x00.h"
 #include "rt2x00pci.h"
 
+/*
+ * Register access.
+ */
+int rt2x00pci_regbusy_read(struct rt2x00_dev *rt2x00dev,
+			   const unsigned int offset,
+			   const struct rt2x00_field32 field,
+			   u32 *reg)
+{
+	unsigned int i;
+
+	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+		rt2x00pci_register_read(rt2x00dev, offset, reg);
+		if (!rt2x00_get_field32(*reg, field))
+			return 1;
+		udelay(REGISTER_BUSY_DELAY);
+	}
+
+	ERROR(rt2x00dev, "Indirect register access failed: "
+	      "offset=0x%.08x, value=0x%.08x\n", offset, *reg);
+	*reg = ~0;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rt2x00pci_regbusy_read);
+
 /*
  * TX data handlers.
  */

drivers/net/wireless/rt2x00/rt2x00pci.h

@@ -76,6 +76,24 @@ rt2x00pci_register_multiwrite(struct rt2x00_dev *rt2x00dev,
 	memcpy_toio(rt2x00dev->csr.base + offset, value, length);
 }
 
+/**
+ * rt2x00pci_regbusy_read - Read from register with busy check
+ * @rt2x00dev: Device pointer, see &struct rt2x00_dev.
+ * @offset: Register offset
+ * @field: Field to check if register is busy
+ * @reg: Pointer to where register contents should be stored
+ *
+ * This function will read the given register, and checks if the
+ * register is busy. If it is, it will sleep for a couple of
+ * microseconds before reading the register again. If the register
+ * is not read after a certain timeout, this function will return
+ * FALSE.
+ */
+int rt2x00pci_regbusy_read(struct rt2x00_dev *rt2x00dev,
+			   const unsigned int offset,
+			   const struct rt2x00_field32 field,
+			   u32 *reg);
+
 /**
  * rt2x00pci_write_tx_data - Initialize data for TX operation
  * @entry: The entry where the frame is located

drivers/net/wireless/rt2x00/rt61pci.c

@@ -55,20 +55,13 @@ MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
  * the access attempt is considered to have failed,
  * and we will print an error.
  */
-static u32 rt61pci_bbp_check(struct rt2x00_dev *rt2x00dev)
-{
-	u32 reg;
-	unsigned int i;
-
-	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-		rt2x00pci_register_read(rt2x00dev, PHY_CSR3, &reg);
-		if (!rt2x00_get_field32(reg, PHY_CSR3_BUSY))
-			break;
-		udelay(REGISTER_BUSY_DELAY);
-	}
-
-	return reg;
-}
+#define WAIT_FOR_BBP(__dev, __reg) \
+	rt2x00pci_regbusy_read((__dev), PHY_CSR3, PHY_CSR3_BUSY, (__reg))
+#define WAIT_FOR_RF(__dev, __reg) \
+	rt2x00pci_regbusy_read((__dev), PHY_CSR4, PHY_CSR4_BUSY, (__reg))
+#define WAIT_FOR_MCU(__dev, __reg) \
+	rt2x00pci_regbusy_read((__dev), H2M_MAILBOX_CSR, \
+			       H2M_MAILBOX_CSR_OWNER, (__reg))
 
 static void rt61pci_bbp_write(struct rt2x00_dev *rt2x00dev,
 			      const unsigned int word, const u8 value)
@@ -78,15 +71,10 @@ static void rt61pci_bbp_write(struct rt2x00_dev *rt2x00dev,
 	mutex_lock(&rt2x00dev->csr_mutex);
 
 	/*
-	 * Wait until the BBP becomes ready.
-	 */
-	reg = rt61pci_bbp_check(rt2x00dev);
-	if (rt2x00_get_field32(reg, PHY_CSR3_BUSY))
-		goto exit_fail;
-
-	/*
-	 * Write the data into the BBP.
+	 * Wait until the BBP becomes available, afterwards we
+	 * can safely write the new data into the register.
 	 */
+	if (WAIT_FOR_BBP(rt2x00dev, &reg)) {
 		reg = 0;
 		rt2x00_set_field32(&reg, PHY_CSR3_VALUE, value);
 		rt2x00_set_field32(&reg, PHY_CSR3_REGNUM, word);
@@ -94,14 +82,9 @@ static void rt61pci_bbp_write(struct rt2x00_dev *rt2x00dev,
 		rt2x00_set_field32(&reg, PHY_CSR3_READ_CONTROL, 0);
 
 		rt2x00pci_register_write(rt2x00dev, PHY_CSR3, reg);
-	mutex_unlock(&rt2x00dev->csr_mutex);
-
-	return;
+	}
 
-exit_fail:
 	mutex_unlock(&rt2x00dev->csr_mutex);
-
-	ERROR(rt2x00dev, "PHY_CSR3 register busy. Write failed.\n");
 }
 
 static void rt61pci_bbp_read(struct rt2x00_dev *rt2x00dev,
@@ -112,15 +95,14 @@ static void rt61pci_bbp_read(struct rt2x00_dev *rt2x00dev,
 	mutex_lock(&rt2x00dev->csr_mutex);
 
 	/*
-	 * Wait until the BBP becomes ready.
-	 */
-	reg = rt61pci_bbp_check(rt2x00dev);
-	if (rt2x00_get_field32(reg, PHY_CSR3_BUSY))
-		goto exit_fail;
-
-	/*
-	 * Write the request into the BBP.
+	 * Wait until the BBP becomes available, afterwards we
+	 * can safely write the read request into the register.
+	 * After the data has been written, we wait until hardware
+	 * returns the correct value, if at any time the register
+	 * doesn't become available in time, reg will be 0xffffffff
+	 * which means we return 0xff to the caller.
 	 */
+	if (WAIT_FOR_BBP(rt2x00dev, &reg)) {
 		reg = 0;
 		rt2x00_set_field32(&reg, PHY_CSR3_REGNUM, word);
 		rt2x00_set_field32(&reg, PHY_CSR3_BUSY, 1);
@@ -128,48 +110,29 @@ static void rt61pci_bbp_read(struct rt2x00_dev *rt2x00dev,
 
 		rt2x00pci_register_write(rt2x00dev, PHY_CSR3, reg);
 
-	/*
-	 * Wait until the BBP becomes ready.
-	 */
-	reg = rt61pci_bbp_check(rt2x00dev);
-	if (rt2x00_get_field32(reg, PHY_CSR3_BUSY))
-		goto exit_fail;
+		WAIT_FOR_BBP(rt2x00dev, &reg);
+	}
 
 	*value = rt2x00_get_field32(reg, PHY_CSR3_VALUE);
-	mutex_unlock(&rt2x00dev->csr_mutex);
-
-	return;
 
-exit_fail:
 	mutex_unlock(&rt2x00dev->csr_mutex);
-
-	ERROR(rt2x00dev, "PHY_CSR3 register busy. Read failed.\n");
-	*value = 0xff;
 }
 
 static void rt61pci_rf_write(struct rt2x00_dev *rt2x00dev,
 			     const unsigned int word, const u32 value)
 {
 	u32 reg;
-	unsigned int i;
 
 	if (!word)
 		return;
 
 	mutex_lock(&rt2x00dev->csr_mutex);
 
-	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-		rt2x00pci_register_read(rt2x00dev, PHY_CSR4, &reg);
-		if (!rt2x00_get_field32(reg, PHY_CSR4_BUSY))
-			goto rf_write;
-		udelay(REGISTER_BUSY_DELAY);
-	}
-
-	mutex_unlock(&rt2x00dev->csr_mutex);
-	ERROR(rt2x00dev, "PHY_CSR4 register busy. Write failed.\n");
-	return;
-
-rf_write:
+	/*
+	 * Wait until the RF becomes available, afterwards we
+	 * can safely write the new data into the register.
+	 */
+	if (WAIT_FOR_RF(rt2x00dev, &reg)) {
 		reg = 0;
 		rt2x00_set_field32(&reg, PHY_CSR4_VALUE, value);
 		rt2x00_set_field32(&reg, PHY_CSR4_NUMBER_OF_BITS, 21);
@@ -178,6 +141,7 @@ static void rt61pci_rf_write(struct rt2x00_dev *rt2x00dev,
 
 		rt2x00pci_register_write(rt2x00dev, PHY_CSR4, reg);
 		rt2x00_rf_write(rt2x00dev, word, value);
+	}
 
 	mutex_unlock(&rt2x00dev->csr_mutex);
 }
@@ -196,11 +160,11 @@ static void rt61pci_mcu_request(struct rt2x00_dev *rt2x00dev,
 
 	mutex_lock(&rt2x00dev->csr_mutex);
 
-	rt2x00pci_register_read(rt2x00dev, H2M_MAILBOX_CSR, &reg);
-
-	if (rt2x00_get_field32(reg, H2M_MAILBOX_CSR_OWNER))
-		goto exit_fail;
-
+	/*
+	 * Wait until the MCU becomes available, afterwards we
+	 * can safely write the new data into the register.
+	 */
+	if (WAIT_FOR_MCU(rt2x00dev, &reg)) {
 		rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_OWNER, 1);
 		rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_CMD_TOKEN, token);
 		rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_ARG0, arg0);
@@ -211,17 +175,10 @@ static void rt61pci_mcu_request(struct rt2x00_dev *rt2x00dev,
 		rt2x00_set_field32(&reg, HOST_CMD_CSR_HOST_COMMAND, command);
 		rt2x00_set_field32(&reg, HOST_CMD_CSR_INTERRUPT_MCU, 1);
 		rt2x00pci_register_write(rt2x00dev, HOST_CMD_CSR, reg);
+	}
 
 	mutex_unlock(&rt2x00dev->csr_mutex);
 
-	return;
-
-exit_fail:
-	mutex_unlock(&rt2x00dev->csr_mutex);
-
-	ERROR(rt2x00dev,
-	      "mcu request error. Request 0x%02x failed for token 0x%02x.\n",
-	      command, token);
 }
 #endif /* CONFIG_RT2X00_LIB_LEDS */
 

drivers/net/wireless/rt2x00/rt73usb.c

@@ -63,7 +63,7 @@ static inline void rt73usb_register_read(struct rt2x00_dev *rt2x00dev,
 	__le32 reg;
 	rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ,
 				      USB_VENDOR_REQUEST_IN, offset,
-				      &reg, sizeof(u32), REGISTER_TIMEOUT);
+				      &reg, sizeof(reg), REGISTER_TIMEOUT);
 	*value = le32_to_cpu(reg);
 }
 
@@ -73,7 +73,7 @@ static inline void rt73usb_register_read_lock(struct rt2x00_dev *rt2x00dev,
 	__le32 reg;
 	rt2x00usb_vendor_req_buff_lock(rt2x00dev, USB_MULTI_READ,
 				       USB_VENDOR_REQUEST_IN, offset,
-				       &reg, sizeof(u32), REGISTER_TIMEOUT);
+				       &reg, sizeof(reg), REGISTER_TIMEOUT);
 	*value = le32_to_cpu(reg);
 }
 
@@ -93,7 +93,7 @@ static inline void rt73usb_register_write(struct rt2x00_dev *rt2x00dev,
 	__le32 reg = cpu_to_le32(value);
 	rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE,
 				      USB_VENDOR_REQUEST_OUT, offset,
-				      &reg, sizeof(u32), REGISTER_TIMEOUT);
+				      &reg, sizeof(reg), REGISTER_TIMEOUT);
 }
 
 static inline void rt73usb_register_write_lock(struct rt2x00_dev *rt2x00dev,
@@ -102,7 +102,7 @@ static inline void rt73usb_register_write_lock(struct rt2x00_dev *rt2x00dev,
 	__le32 reg = cpu_to_le32(value);
 	rt2x00usb_vendor_req_buff_lock(rt2x00dev, USB_MULTI_WRITE,
 				       USB_VENDOR_REQUEST_OUT, offset,
-				      &reg, sizeof(u32), REGISTER_TIMEOUT);
+				       &reg, sizeof(reg), REGISTER_TIMEOUT);
 }
 
 static inline void rt73usb_register_multiwrite(struct rt2x00_dev *rt2x00dev,
@@ -115,21 +115,32 @@ static inline void rt73usb_register_multiwrite(struct rt2x00_dev *rt2x00dev,
 				      REGISTER_TIMEOUT32(length));
 }
 
-static u32 rt73usb_bbp_check(struct rt2x00_dev *rt2x00dev)
+static int rt73usb_regbusy_read(struct rt2x00_dev *rt2x00dev,
+				const unsigned int offset,
+				struct rt2x00_field32 field,
+				u32 *reg)
 {
-	u32 reg;
 	unsigned int i;
 
 	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-		rt73usb_register_read_lock(rt2x00dev, PHY_CSR3, &reg);
-		if (!rt2x00_get_field32(reg, PHY_CSR3_BUSY))
-			break;
+		rt73usb_register_read_lock(rt2x00dev, offset, reg);
+		if (!rt2x00_get_field32(*reg, field))
+			return 1;
 		udelay(REGISTER_BUSY_DELAY);
 	}
 
-	return reg;
+	ERROR(rt2x00dev, "Indirect register access failed: "
+	      "offset=0x%.08x, value=0x%.08x\n", offset, *reg);
+	*reg = ~0;
+
+	return 0;
 }
 
+#define WAIT_FOR_BBP(__dev, __reg) \
+	rt73usb_regbusy_read((__dev), PHY_CSR3, PHY_CSR3_BUSY, (__reg))
+#define WAIT_FOR_RF(__dev, __reg) \
+	rt73usb_regbusy_read((__dev), PHY_CSR4, PHY_CSR4_BUSY, (__reg))
+
 static void rt73usb_bbp_write(struct rt2x00_dev *rt2x00dev,
 			      const unsigned int word, const u8 value)
 {
@@ -138,15 +149,10 @@ static void rt73usb_bbp_write(struct rt2x00_dev *rt2x00dev,
 	mutex_lock(&rt2x00dev->csr_mutex);
 
 	/*
-	 * Wait until the BBP becomes ready.
-	 */
-	reg = rt73usb_bbp_check(rt2x00dev);
-	if (rt2x00_get_field32(reg, PHY_CSR3_BUSY))
-		goto exit_fail;
-
-	/*
-	 * Write the data into the BBP.
+	 * Wait until the BBP becomes available, afterwards we
+	 * can safely write the new data into the register.
 	 */
+	if (WAIT_FOR_BBP(rt2x00dev, &reg)) {
 		reg = 0;
 		rt2x00_set_field32(&reg, PHY_CSR3_VALUE, value);
 		rt2x00_set_field32(&reg, PHY_CSR3_REGNUM, word);
@@ -154,14 +160,9 @@ static void rt73usb_bbp_write(struct rt2x00_dev *rt2x00dev,
 		rt2x00_set_field32(&reg, PHY_CSR3_READ_CONTROL, 0);
 
 		rt73usb_register_write_lock(rt2x00dev, PHY_CSR3, reg);
-	mutex_unlock(&rt2x00dev->csr_mutex);
-
-	return;
+	}
 
-exit_fail:
 	mutex_unlock(&rt2x00dev->csr_mutex);
-
-	ERROR(rt2x00dev, "PHY_CSR3 register busy. Write failed.\n");
 }
 
 static void rt73usb_bbp_read(struct rt2x00_dev *rt2x00dev,
@@ -172,15 +173,14 @@ static void rt73usb_bbp_read(struct rt2x00_dev *rt2x00dev,
 	mutex_lock(&rt2x00dev->csr_mutex);
 
 	/*
-	 * Wait until the BBP becomes ready.
-	 */
-	reg = rt73usb_bbp_check(rt2x00dev);
-	if (rt2x00_get_field32(reg, PHY_CSR3_BUSY))
-		goto exit_fail;
-
-	/*
-	 * Write the request into the BBP.
+	 * Wait until the BBP becomes available, afterwards we
+	 * can safely write the read request into the register.
+	 * After the data has been written, we wait until hardware
+	 * returns the correct value, if at any time the register
+	 * doesn't become available in time, reg will be 0xffffffff
+	 * which means we return 0xff to the caller.
 	 */
+	if (WAIT_FOR_BBP(rt2x00dev, &reg)) {
 		reg = 0;
 		rt2x00_set_field32(&reg, PHY_CSR3_REGNUM, word);
 		rt2x00_set_field32(&reg, PHY_CSR3_BUSY, 1);
@@ -188,51 +188,31 @@ static void rt73usb_bbp_read(struct rt2x00_dev *rt2x00dev,
 
 		rt73usb_register_write_lock(rt2x00dev, PHY_CSR3, reg);
 
-	/*
-	 * Wait until the BBP becomes ready.
-	 */
-	reg = rt73usb_bbp_check(rt2x00dev);
-	if (rt2x00_get_field32(reg, PHY_CSR3_BUSY))
-		goto exit_fail;
+		WAIT_FOR_BBP(rt2x00dev, &reg);
+	}
 
 	*value = rt2x00_get_field32(reg, PHY_CSR3_VALUE);
-	mutex_unlock(&rt2x00dev->csr_mutex);
-
-	return;
 
-exit_fail:
 	mutex_unlock(&rt2x00dev->csr_mutex);
-
-	ERROR(rt2x00dev, "PHY_CSR3 register busy. Read failed.\n");
-	*value = 0xff;
 }
 
 static void rt73usb_rf_write(struct rt2x00_dev *rt2x00dev,
 			     const unsigned int word, const u32 value)
 {
 	u32 reg;
-	unsigned int i;
 
 	if (!word)
 		return;
 
 	mutex_lock(&rt2x00dev->csr_mutex);
 
-	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-		rt73usb_register_read_lock(rt2x00dev, PHY_CSR4, &reg);
-		if (!rt2x00_get_field32(reg, PHY_CSR4_BUSY))
-			goto rf_write;
-		udelay(REGISTER_BUSY_DELAY);
-	}
-
-	mutex_unlock(&rt2x00dev->csr_mutex);
-	ERROR(rt2x00dev, "PHY_CSR4 register busy. Write failed.\n");
-	return;
-
-rf_write:
+	/*
+	 * Wait until the RF becomes available, afterwards we
+	 * can safely write the new data into the register.
+	 */
+	if (WAIT_FOR_RF(rt2x00dev, &reg)) {
 		reg = 0;
 		rt2x00_set_field32(&reg, PHY_CSR4_VALUE, value);
-
 		/*
 		 * RF5225 and RF2527 contain 21 bits per RF register value,
 		 * all others contain 20 bits.
@@ -245,6 +225,7 @@ static void rt73usb_rf_write(struct rt2x00_dev *rt2x00dev,
 
 		rt73usb_register_write_lock(rt2x00dev, PHY_CSR4, reg);
 		rt2x00_rf_write(rt2x00dev, word, value);
+	}
 
 	mutex_unlock(&rt2x00dev->csr_mutex);
 }