Commit c9c3c6ee authored by Heiko Stuebner's avatar Heiko Stuebner

clk: rockchip: simplify GRF handling in pll clocks

With the previous commit, the clock drivers now know at init time if the
GRF regmap is available. That means if it isn't available then, it also
won't become available later and we can therefore switch PLLs, that need
the GRF for the lock-status, to read-only mode - similar behaviour as the
aborting of rate changes we did before.

This saves some conditionals on every rate change and we can also drop
the rockchip_clk_get_grf function completely.
Signed-off-by: default avatarHeiko Stuebner <heiko@sntech.de>
parent 6f339dc2
......@@ -92,15 +92,10 @@ static long rockchip_pll_round_rate(struct clk_hw *hw,
*/
static int rockchip_pll_wait_lock(struct rockchip_clk_pll *pll)
{
struct regmap *grf = rockchip_clk_get_grf(pll->ctx);
struct regmap *grf = pll->ctx->grf;
unsigned int val;
int delay = 24000000, ret;
if (IS_ERR(grf)) {
pr_err("%s: grf regmap not available\n", __func__);
return PTR_ERR(grf);
}
while (delay > 0) {
ret = regmap_read(grf, pll->lock_offset, &val);
if (ret) {
......@@ -253,13 +248,6 @@ static int rockchip_rk3036_pll_set_rate(struct clk_hw *hw, unsigned long drate,
struct rockchip_clk_pll *pll = to_rockchip_clk_pll(hw);
const struct rockchip_pll_rate_table *rate;
unsigned long old_rate = rockchip_rk3036_pll_recalc_rate(hw, prate);
struct regmap *grf = rockchip_clk_get_grf(pll->ctx);
if (IS_ERR(grf)) {
pr_debug("%s: grf regmap not available, aborting rate change\n",
__func__);
return PTR_ERR(grf);
}
pr_debug("%s: changing %s from %lu to %lu with a parent rate of %lu\n",
__func__, __clk_get_name(hw->clk), old_rate, drate, prate);
......@@ -492,13 +480,6 @@ static int rockchip_rk3066_pll_set_rate(struct clk_hw *hw, unsigned long drate,
struct rockchip_clk_pll *pll = to_rockchip_clk_pll(hw);
const struct rockchip_pll_rate_table *rate;
unsigned long old_rate = rockchip_rk3066_pll_recalc_rate(hw, prate);
struct regmap *grf = rockchip_clk_get_grf(pll->ctx);
if (IS_ERR(grf)) {
pr_debug("%s: grf regmap not available, aborting rate change\n",
__func__);
return PTR_ERR(grf);
}
pr_debug("%s: changing %s from %lu to %lu with a parent rate of %lu\n",
__func__, clk_hw_get_name(hw), old_rate, drate, prate);
......@@ -565,11 +546,6 @@ static void rockchip_rk3066_pll_init(struct clk_hw *hw)
rate->no, cur.no, rate->nf, cur.nf, rate->nb, cur.nb);
if (rate->nr != cur.nr || rate->no != cur.no || rate->nf != cur.nf
|| rate->nb != cur.nb) {
struct regmap *grf = rockchip_clk_get_grf(pll->ctx);
if (IS_ERR(grf))
return;
pr_debug("%s: pll %s: rate params do not match rate table, adjusting\n",
__func__, clk_hw_get_name(hw));
rockchip_rk3066_pll_set_params(pll, rate);
......@@ -943,13 +919,13 @@ struct clk *rockchip_clk_register_pll(struct rockchip_clk_provider *ctx,
switch (pll_type) {
case pll_rk3036:
if (!pll->rate_table)
if (!pll->rate_table || IS_ERR(ctx->grf))
init.ops = &rockchip_rk3036_pll_clk_norate_ops;
else
init.ops = &rockchip_rk3036_pll_clk_ops;
break;
case pll_rk3066:
if (!pll->rate_table)
if (!pll->rate_table || IS_ERR(ctx->grf))
init.ops = &rockchip_rk3066_pll_clk_norate_ops;
else
init.ops = &rockchip_rk3066_pll_clk_ops;
......
......@@ -365,11 +365,6 @@ void __init rockchip_clk_of_add_provider(struct device_node *np,
pr_err("%s: could not register clk provider\n", __func__);
}
struct regmap *rockchip_clk_get_grf(struct rockchip_clk_provider *ctx)
{
return ctx->grf;
}
void rockchip_clk_add_lookup(struct rockchip_clk_provider *ctx,
struct clk *clk, unsigned int id)
{
......
......@@ -600,7 +600,6 @@ struct rockchip_clk_provider *rockchip_clk_init(struct device_node *np,
void __iomem *base, unsigned long nr_clks);
void rockchip_clk_of_add_provider(struct device_node *np,
struct rockchip_clk_provider *ctx);
struct regmap *rockchip_clk_get_grf(struct rockchip_clk_provider *ctx);
void rockchip_clk_add_lookup(struct rockchip_clk_provider *ctx,
struct clk *clk, unsigned int id);
void rockchip_clk_register_branches(struct rockchip_clk_provider *ctx,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment