net/mlx4: Copy/set only sizeof struct mlx4_eqe bytes

commit c02b0501 upstream.

When doing memcpy/memset of EQEs, we should use sizeof struct
mlx4_eqe as the base size and not caps.eqe_size which could be bigger.

If caps.eqe_size is bigger than the struct mlx4_eqe then we corrupt
data in the master context.

When using a 64 byte stride, the memcpy copied over 63 bytes to the
slave_eq structure.  This resulted in copying over the entire eqe of
interest, including its ownership bit -- and also 31 bytes of garbage
into the next WQE in the slave EQ -- which did NOT include the ownership
bit (and therefore had no impact).

However, once the stride is increased to 128, we are overwriting the
ownership bits of *three* eqes in the slave_eq struct.  This results
in an incorrect ownership bit for those eqes, which causes the eq to
seem to be full. The issue therefore surfaced only once 128-byte EQEs
started being used in SRIOV and (overarchitectures that have 128/256
byte cache-lines such as PPC) - e.g after commit 77507aa2
"net/mlx4_core: Enable CQE/EQE stride support".

Fixes: 08ff3235 ('mlx4: 64-byte CQE/EQE support')
Signed-off-by: Carol L Soto <clsoto@linux.vnet.ibm.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[ luis: backported to 3.16: adjusted context ]
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>

drivers/net/ethernet/mellanox/mlx4/cmd.c

@@ -2029,7 +2029,7 @@ int mlx4_multi_func_init(struct mlx4_dev *dev)
 			spin_lock_init(&s_state->lock);
 		}
 
-		memset(&priv->mfunc.master.cmd_eqe, 0, dev->caps.eqe_size);
+		memset(&priv->mfunc.master.cmd_eqe, 0, sizeof(struct mlx4_eqe));
 		priv->mfunc.master.cmd_eqe.type = MLX4_EVENT_TYPE_CMD;
 		INIT_WORK(&priv->mfunc.master.comm_work,
 			  mlx4_master_comm_channel);

drivers/net/ethernet/mellanox/mlx4/eq.c

@@ -182,7 +182,7 @@ static void slave_event(struct mlx4_dev *dev, u8 slave, struct mlx4_eqe *eqe)
 		return;
 	}
 
-	memcpy(s_eqe, eqe, dev->caps.eqe_size - 1);
+	memcpy(s_eqe, eqe, sizeof(struct mlx4_eqe) - 1);
 	s_eqe->slave_id = slave;
 	/* ensure all information is written before setting the ownersip bit */
 	wmb();